power automatic monitor down?

Similar Questions

• How can I remove the desired or invalid email addresses in automatic drop-down list when I start typing an e-mail address in Outlook?

  How can I remove the desired or invalid email addresses in automatic drop-down list that appears when I start typing an e-mail address in a new message (Outlook)?

  If you wish, you can also stop Outlook of suggesting e-mail addresses as you type.

  Tools > Options.
  Tab "Preferences".
  Click e-mail Options.
  Click Advanced e-mail Options.
  Do not forget to uncheck "suggest names while completing to, Cc, and BCC fields."
  And OK your way out.

• Printer Hp 6520 automatically shuts down after a few hours

  Original title - printer hp 6520 problem

  My new photosmart 6520 automatically shuts down after a few hours, it disconnects from my Win7 machine without using the material removal tool, if I get a nice loud bang when it does.  It is connected through the usb port on my Pavilion.  I don't mind to go to sleep, but I don't want to disconnect completely, because when I send a new print job, he didn't wake up automatically and print, I don't have to feed it manually upwards then it prints very well.  Any ideas on how to solve this problem would be greatly appreciated.  Thanks in advance.

  I could join HP support on this issue this morning.  There were two things - first HP printers now have a built-in surge protector so you should not connect it to an another surge protector.  Second, the default printer is delivered with activated automatic stop, turning off will do sleep, but not to turn it off, so that it accepts print jobs whenever one is sent.  So, if that helps anyone, good!  And thanks also for your help.  :^) gene

• Dell inspiron 530 will not start 4 beeps power black monitor blue button solid yellow lite inside

  I HAV a dell inspiron 530 inter processor duel completely stock w vista... when I push the button to switch the fan to come on the button lights up blue then u hear 4 beeps and inside ther is a yellow solid lite on next to the motherboard no power to monitor usb black fan and s stays lite on the back is green as it should b what is problem It can b fixd can I solve this w taking some1 working inside a computer im alittle above a recruit n do thx mike

  maheisel

  Four "beeps", could indicate a memory problem, if you are comfortable working inside the computer, try to open the case, remove and reinstall all memory modules and see if that makes a difference.

  If you not comfortable working with the removal and the reinstallation of the components, then I suggest that you take the Inspiron 530 to a repairman.

  Is the power button LED, blue constant or flashing blue?

  Every change made to the 530 recently?

  The Inspiron 530 convenience store and the diagnosis Codes are HERE the ADMIN NOTE: broken link has been removed from this post by Dell >

  Bev.

• Click title menu & see the target automatically scrolling down.

  Hello

  I hope well.

  Now, I want to do something else in muse, you tell me how when I click on any position then the page to automatically scroll down and show the target.

  How his talk to me.

  Thank you

  Akash.

  Hi Akash,

  You can do this by using the widget of composition. Adobe Muse help | Working with widgets of Composition

  Kind regards

  Akshay

• Down power automatically

  My laptop is powered automatically power off when I work. When again, I'm taking the power back, it's showing a message saying "the system detected below battery storage capacity is very weak...". ». But after starting the system, I see the display full battery / with good percentage of available.

  Try this to see if it makes a difference:

  http://support.HP.com/us-en/document/c00817650

  I also see that a hard reset can make a difference:

  http://h10010.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01684768&product=1132551

• WINDOWS UPDATES AUTOMATIC @ SHUT DOWN MODE AND THEN MY COMPUTER IS NOT WORKING WHEN I TURN IT BACK

  Wow, I thought that I already asked the question. ??? I recently re - set up my old computer from last year. Everything went well on it. All my programs, files, photos, email and internet wall works very well. I went to shut it down and Windows Update popped up indicating not to touch or power off the computer turns off automatically after Windows updates were installed then... There were 22 updates installed by Windows Update and the computer is down. I waited for 6 or 7 minutes and turned on my system back to see nothing load, my monitor screen educated on and said to go to sleep! If someone can tell me what Windows has done to my system. Why they ask me to pay for something that they obviously screwed and how to contact a live person who can help me with their question? PLEASE, ANY HELP IS GREATLY APPRECIATED. MY NAME IS ELIZABETH AND I CAN BE CONTACTED AT 228.385.0336. Thank you very much!

  Hi Elizabeth,.
   
  Check if the fix given in this link will help you in fixing the issue:
  The computer leaves not put into hibernation or does not Wake-on-LAN mode ensures
   
  I also suggest you to follow the steps in this article and the Coachman.
  How to solve the problems of hibernation and standby in Windows XP
   
  For more information on phone Microsoft support option, see:
  Support for Windows XP technical issues and troubleshooting

• Setting PC to turn off automatically - count down

  Does anyone know if it is possible to adjust the computer turns off automatically during a certain period, such as two hours. For example if I download something on the internet or watch a movie form the bed, it would be useful if there was a possibility that my computer can turn off for a while, I put. If the TV can do that, why the computer can not?

  Thanks for the help

  Here's how to configure your PC to turn off automatically:
  1) click Start
  (2) select "Control Panel".
  (3) select "system and maintenance".
  4) click on "Administrative Tools".
  5) click on "Task Scheduler."
  (6) click on "create task" (right in the list pane under) "Actions") "
  "(7) opened in the general tab it will choose if it only works when the account that is used to implement is connected, or ' if that user is logged in or not" (leave the box ' do not store the... "empty password)
  (8) always in the general tab, check the box 'run with highest privileges '. (This will ensure that no program can block)
  (9) type a name for the task (in the general tab)
  (10) If you want the PC off at a set time (eg. midnight) follow step 10). If you want to close after a period of time (eg. time of 20 minutes of inactivity) skip step 10).
  (a) click on the tab "triggers."
  (b) click on 'new '.
  (c) under 'settings', select 'everyday', then enter the duration you want in the space provided. Make sure the box ' reproduce each:... days said 1.
  (d) click OK.
  (11) do this step to turn off the PC after staying idle for some time.
  (a) click on the 'conditions' tab in the window "create a task".
  (b) check the ' start the task only if the computer is idle for: "and chose the desired time
  (c) less ' wait timeout:' chosen "don't wait."
  (d) click OK
  (12) in this stage, communicate us to the PC to shut down.
  (a) click on the tab "actions".
  (b) click on 'new '.
  (c) in the line of program/script, type "C:\Windows\System32\shutdown.exe.
  (d) click OK.
  13) click OK in the window "create a task".
  (14) you are now finished.

  Here's how to configure your PC to automatically through windows: http://www.astahost.com/Turn-Computer-Automatically-t7075.html

  Your PC will already in mode 'sleep' (unless you have changed which) which is a State of "close arrest", after 20 min. or more, but it still uses power. The advantage of the 'sleep' is that it starts in a few seconds of him compared to 1 min normally. Mode sleep in Vista: http://www.howtogeek.com/howto/windows-vista/re-enable-sleep-mode-in-windows-vista/

  I hope this helps.

• Satellite A300 overheating - automatic stop downs

  My partner is a problem with its Satellite A300 10 m overheating and cutting and has to start and sometimes recover

  the time varies a little but everytime it happens there is a lot of heat through vent

  We have tried to put the laptop on a variety of surfaces and had a fan on the laptop to try to keep it cool but it seems still overheating

  the laptop may stay inactive come to him and move the mouse, or start typing and it shuts the laptop is around the age of 8 months now

  and would like some to none of us are very tech savvy well but any help would be appreciated

  Thank you for your time

  Hi Vilus

  During the long period of use, the cooling modules may be blocked by dust.
  This would prevent air from traffic and could lead to a higher temperature.
  I have experience with such behavior cell phone because this happened to my two different notebooks from different manufacturers.

  The cooling modules couldn t run with the best performance because of the dust and I was forced to use a jet of compressed air that has helped remove a lot of dust and debris.
  I blew air through the vents and fans and I was really surprised how much dust was hidden inside the laptop.

  In any case, after this procedure accelerated, the temperature went down and laptop didn t stopped automatically.

• the page scrolling automatically moves down

  scrolling of the page on the web page down and rest automatically. even when I try pulling up it comes. with the page up key the cursor goes up and then comes in the back. Please if anyone can help

  What browser do you use?

  Some have no auto scrolling features like Firefox & Palemoon who Yes is boring.

  Use Alt + at for the bar menu / Tools / Options

  

• the mouse no longer works in certain combinations of power/multi monitor

  Win 7 32 bit ASUS EEE PC laptop.  Worked normally up to today.

  Battery, mouse (touchpad) works very well.  When I plug in the power supply, the mouse stops (always displays right click context menu).

  By chance discovered that with a second monitor mouse moves ok on battery or AC power.  (I use multiple monitors on a regular basis).

  It seems that no matter how I get to the single monitor on power mode, the mouse stops.  If I am autonomous on battery and add HQ, the mouse stops.  If I have a second monitor attached during an AC, even in single monitor mode (i.e. on the LCD of the PC screen), simply unplug the monitor causes the mouse to stop moving.

  It looks like a problem of "state machine".  As if a program setting got out of sync so that the PC goes in power state AC stand alone, movement of the mouse is disabled.  I'm puzzled - I have never seen anything like this.  I did a system restore to several days ago, with no impact.

  Any ideas appreciated.

  Best regards

  Hi Deepak, and all those who may read this,

  In response to your questions: (1) no change except for a new PSU (which is relevant, as noted below), (2) not built in touchpad Synaptics.

  Thank you very much for your detailed response confirming the troubleshooting steps.  I actually tried these.  It turns out that only this morning that I was able to confirm what the problem was.  As strong as it is to believe, the power supply is at fault, but it's subtle.

  The original forum post does not include the fact that the problem was known then on the campus, which is important.  I have 2 different power supplies (various manufacturers).  Both work very well at home; but one of them the cause of the problem of the mouse on the campus.

  I never heard of such a problem given that the design of power supply is done enough these days, but it appears among the supplies allows something through the computer that inhibits the operation of the mouse.  It is difficult to imagine that this is a power level; Maybe it's a kind of transmission high frequency bearing on the logic of material for the mouse.  When the external monitor is plugged into the campus electronic context changes and the problem disappears.

  For any other person who have this problem I would suggest trying to use the PC on the current in a different location, or use a different power plug at the same place.

  Best regards

• When I click on a clip on a timeline, it automatically moves down to 45 seconds and another track

  So I don't know what I did, or if it's a weird bug on my system, but all of a sudden whenever I click on an item to move it, the clip moves to the low about 45 seconds to the right and down a track.  Everything else I have point to works very well and it seems constant, that's why I thought it would be some adjustments, but I can't understand and it drives me crazy.  I uninstalled and got rid of the preferences, but the behavior returned.  If I open AE, pliers movement is normal.   New projects of first are the same. Any thoughs?

  Hmm.  I thought about it, it has something to do with the multiple Mac monitors.  I extend instead to use spaces and discreet work for some reason any first can get confused.  I was moving the windows on different monitors and it fixed the issue.

• 6500 power automatic duplex

  I just bought an Officejet 6500 E709n. It came with the duplexing feature (accessory that attaches to the rear).

  I earlier had an Officejet 7310 also having two-sided printing function.

  I am doing with the 6500, what I was doing with the 7310:

  -set the automatic duplex power (so that the ADF (ADF) will read both sides of the sheet)

  -affect printing DUPLEX (so that the printer prints on both sides of the print media)

  -copy a document of duplicate entry in a document to output duplex in the following way:

  -I place a sheet (or a number of sheets) into the automatic document feeder

  -AJD reads the side front side of the sheet and releases it only partially

  -l' print the side front of the sheet and partially released so that it dries

  -the drawee of the duplexer sheet out of back inside

  -pull ADF, the rear entrance to the inside sheet in order to read the entry side back

  -l' prints the side back of the plug provided by the duplexer and it releases completely

  -If the other leaves are in the ADF, the ADF reads the next sheet and the process is repeated until there is no input more

  I know how to set print double-sided on the 6500, but I can't find instructions for reading duplex value.

  I just spent a few hours with the support of cat, which left me hanging at the end asking me to call HP Total Care phone support to the 1-800-474-6836.

  Can you help me?

  The ADF in the OJ 6500 Wireless does not have the capacity automatic duplex. He cannot read the two sides of an original automatically.

• Target management automatic storage down in Enterprise Manager Grid 11.1

  Hello
  
  I use Oracle Enterprise Manager Grid 11.1.0.1.0 and I got alert that ASM target is down, because the entire box of linux, database and the ASM have been restarted. The database uses ASM and it is running now. This alert is old, how clear he / she re-evaluate that if the State concerned?
  
  
  Here's what I got:
  
  Agent is unable to communicate with the WHO. (REASON = Agent is inaccessible (REASON: Agent of Communication WHO is brokenNo WHO's response header))
  Inaccessible agent is disabled. The current state of the target is DOWN.
  The agent is inaccessible (REASON = no route to host). The host is unreachable (REASON = Ping has expired.)
  
  The alert message is:
  "Unable to connect to the instance of the DSO. "ORA-15000: order rejected by current instance type (DBD ERROR: OCISessionBegin).
  
  I tried also to reassess the alert administrator super user, but I got the message "you don't have sufficient privilege to perform this operation. Only administrators with privileges to manage the target alert can collect measures. "
  
  No idea how to reassess the State?
  
  Thank you
  Maria

  I found this remark:

  https://support.Oracle.com/CSP/main/article?cmd=show&type=not&DOCTYPE=problem&ID=1276657.1

  That contains the news of gold nugget that solved my problem... You must ensure that use you the SYSDBA (and not SYSASM) role when you set up the monitoring of ASM. From the notes, it appears that the JDBC Thin client has no idea what to do with the role of "SYSASM".

  Hope that helps.

• Satellite Pro C50-A-1E5 loses power while stopping down

  Whenever I leave my phone ~ 3 months power off - completely put off, as in the case - for about a week, when I come back he has lost all power and needs to be recharged again. It's obviously quite irritating, especially because I bought it to replace my old laptop when the battery top broke.

  Any advice would be appreciated.

  Such behavior of the laptop can occur where some BIOS functions are active.
  You must disable in the BIOS, wake up options like Wake Up on LAN or Wake Up on the keyboard, etc.
  In addition, you must disable sleep & Charge (if available)

  PS: Don't forget save the changes in the BIOS.