Satellite Pro C50-A-1E5 loses power while stopping down

Whenever I leave my phone ~ 3 months power off - completely put off, as in the case - for about a week, when I come back he has lost all power and needs to be recharged again. It's obviously quite irritating, especially because I bought it to replace my old laptop when the battery top broke.

Any advice would be appreciated.

Such behavior of the laptop can occur where some BIOS functions are active.
You must disable in the BIOS, wake up options like Wake Up on LAN or Wake Up on the keyboard, etc.
In addition, you must disable sleep & Charge (if available)

PS: Don't forget save the changes in the BIOS.

Tags: Toshiba

Similar Questions

  • Satellite Pro C50 - A - 1 K 9 - screen flickers power on and off

    Has anyone encountered a problem where the screen flickers power on and off? Mine will Dim to the point where you can't see whats happening and then back to normal.

    I tried a restore drivers, but the problem persisted. I did also check complete anti-virus (I realize that it was probably not the cause of the problem, but decided to be complete). I was thinking that it's purely a hardware problem, like when I use an external monitor connected through a HDMI cable I don't have this problem.

    I guess it must be a problem with the connection between the screen and the motherboard. Maybe a problem within the hinge where they cross connection.

    Anyone got any other suggestions until I sent it off for repair (only he got in March and I have a 2 year warranty, but who goes back to college soon and do not want to be without him).

    I have a Toshiba Satellite Pro C50 - A - 1 k 9.

    Thanks in advance.

    I agree with you, Fraser and think it could be hardware related issue but I don't in any way you can fix it alone. Your laptop must be controlled by the Toshiba service provider.

    Contact the nearest service provider for Toshiba in your country, explain the situation and ask for help.

  • Battery draining fast on Satellite Pro C50-A - 1 HR

    I have a new Satellite Pro C50 cell phone-A - 1 hr. (He had one week only) with installed Windows 8.1. The battery loses at least 30% of the overnight charge when completely closed and seems to pass pretty quickly when I use it also. It is true that I used it a lot, to try to familiarize themselves with 8.1 (I had Vista before, steep learning curve). Can someone tell me if this behavior of the battery is normal, please?

    I need to plug the power supply cord, whenever I use it, concerned that if I use the laptop for a week or more, the battery would be dead!

    Can anyone help please? Thank you

    then you don't need a new battery... I had this problem once and I fixed it by getting a new battery. also, you can apply for coverage then maybe they can replace your old battery with a new one :) good luck.

    ETH.

  • Problems of helmet speakers on dualboot Satellite Pro C50-A-1KV

    Hi all.

    I have a serious problem with Toshiba Satellite Pro C50-A-1KV. I have win7 x 64 and Ubuntu 14.04 x 64 on this machine. It was first installed Win7 and later Ubuntu 14.04.

    I tried to use the headset while I was logged on ubuntu and there is no sound, the sound was cut out of the speakers but headphones did not work, when I plugged it out I still have the sound on the speakers.

    After reboot I had no sound at all on ubuntu, and when I go to windows, the problem worsen for windows also. Right now it seems like some time the sound is on the speakers, but headset is dead, some time ago his headphones and speakers.

    I have no idea what is the cause of the problem. The win7 and ubuntu have been kept clean, only the updates have been downloaded. I think that the driver has some problems, but how could I make it work. To test, I tried to use Skype and there was a situation where I have the sound on the speakers and headphones, but then the microphone was death-_-'.

    I have a few pieces of it and the exact problem is on half of them. I have 2 deliveries.
    The first onewas ok, everything works. Either everyone has this problem :/

    I tried to make a backup on model where it is working and windows backup restore and install new ubuntu but it did not work.

    Any suggestions what may cause the problem or how to fix?

    I think you should first clarify whether your headset is OK.

    My theory is that your helmet could be faulty (maybe a broken cable or something like that) and that's why speakers and headphones will not work when the headset is plugged into the laptop.

    Laptop computer's headphones Jack supports a small switch that allows you to disable the speakers while the headphones are connected.

    If in case the headset is faulty, the speakers and the headphones would not work.
    So I think you should check the helmet first.

    If you are sure that the earphones are OK, then I think there could be a problem with the little switch in the headphone jack.
    Why? Because I can't imagine that this could be a software / driver problem because the same question is displayed using Linux as well as Windows System.

    The two systems are completely different and that a software / driver problem in both cases, it's almost unbelievable.

    However, I still recommend setting the laptop configuration using the procedure of recovery Toshiba in order to check if the noise problem using Toshiba preistalled system configuration and factory

  • Satellite Pro C50-A-1E4 - how to merge partitions?

    My laptop is a Satellite Pro C50-A-1E4 running Windows 7 Pro 64 bit.

    In receiving a year ago, I replaced the hard drive with a 256 GB SSD. I partitioned in a 60 GB C drive and a 192 GB D the rest drive is the hidden restore partition.

    I have install all the software on C and my personal stuff on D.
    Now, the C drive is nearly full, but there are a lot of free space on D.

    Can you advise me how reallocate for example 20 GB from D to C with nothing to lose?
    I would like to make a complete backup of the drive D.

    Basic support for Windows (seems to me) to sit on a hard drive where the bottles must be adjacent, but I'm assuming that does not apply to an SSD.

    Any help and advice would be appreciated.

    Thank you.
    Harold

    Hello

    I recommend you to use a 3rd party software called Gparted.
    http://gparted.org/LiveCD.php

    Its freeware software that allows you to change the partitions on SSD or HARD disk.

    You can create a bootable USB flash memory key and might start Notepad to change the partitions.

    This s really great freeware software.

  • Impossible to change the bright screen on Satellite Pro C50-A-143

    I run windows 8.1 and I could not change the brightness of the screen for a while now.

    It happened a few months before, but after a random number of days that it worked again, now it is stuck in about 60% bright max, which is not enough when the sun comes through the window.

    According to the Toshiba Satellite Pro C50-A-143 datasheet this laptop has been preloaded with Win 7 64 bit and Win additional 8.1 own drive was part of the package.
    I assume that you have installed own 8.1 win but have not installed all the drivers Toshiba win 8.1.

    Is this correct?

    Visit the page of the Toshiba UE driver, install all the drivers, tools and utilities (graphic card drivers display tool, driver Toshiba system, etc.)
    Utility function key Toshiba is very important if it is to use the key function (Fn, F1-10)

    Then you should be able to use the function key to decrease and increase the brightness of the display.

  • Satellite Pro C50 - A - screen Black/Brown problem

    Hi all

    I want to share one problem that I have with my cell phone, just to see if anyone of you already experience or maybe you know some options how to solve this problem.

    I bought a Satellite Pro C50 - A model in January 2014, with 8.1 Windows preinstalled. A few weeks ago, I lived for the first time the question.

    Work with the laptop, the screen turns off suddenly. The laptop still works, that I've already connected to another screen and keyboard and the mouse works, everything. Even if you focus a little bit on the screen of the laptop, you can see the shape of what I'm doing, but very very dark, almost extinct.

    First time it happened, I was able to fix after a few attempts, unplug the laptop DC and taking the battery, then pressing the power button / stop for 30 seconds. I had to do this several times, and then it started working.

    The issue seems to be fixed, but yesterday it happened again, with the bad luck that do the same process is not enough... He worked for 1 min and then it turned off again...

    I don't know what I can do, as last option I would like to reset to factory settings, but it's something I want to jump.

    * Are there known error, malware or fault in laptops that could help me? *

    I thank very you much in advance!

    To be honest I have don recovery think t install image will help you.

    I put t have this bad experience on my Toshiba machines but I sure it's material m unwanted and cannot imagine that recovery clean installation will change anything.

    In the past, some people have reported on similar problems, and the reason was bad FL inverter.
    The warranty is still valid, so I think that you contact the nearest Toshiba service provider and ask for help.

  • Satellite Pro C50-A-1E2: problem get into BIOS after the activation of the quick start

    Hello

    I own Satellite Pro C50-A-1E2.

    Default hard drive has been replaced by a v300 kingston ssd. I also enabled quick start.
    I am trying to get into the BIOS but without success.

    I tried all possible combinations (Esc, DEL, f1, f2, f8, fn + esc, f1... fn)

    I found this piece of information through Googling: "press f2, and then press power. But always without success.
    Help with my problem?

    Thank you.

    Hello

    Quick start can be enabled and disabled too using the Toshiba software called Desktop Help. Within this tool, you would find the HWSetup Toshiba and this part of software must contain the quick start option.

    Check it out.

    By the way: for some series laptop, press INS key then F2 worked too.

  • Satellite Pro C50 keyboard problems - A - 1 L 6

    Hello

    I just bought this new Satellite Pro.

    I have installed all the drivers and updated the bios to the latest version, but I still have the same problem: when I write, many times my keyboard writes double letters (for example, all ten words written keyboard a letter double, as "keybboard").

    I tried also to change the properties of the keypad on the control panel of Windows 8, but nothing has changed.

    I called support, but they just told me that I have to bring my laptop in a helpdesk: but I need my new computer to work, and I wouldn't be happy to lose at least 4 weeks!

    And, support told me that, if the laptop has no hardware problem, I would have to pay for assistance...
    .
    So, this is my first experience and unlucy in the world of Toshiba...
    Is there someone who can give me some advice to solve this problem?
    It may be a problem running on the new laptops, and someone knows how to fix this?

    Thank you very much!

    Hi guys,.

    As far as I know that these similar keyboard problems in the past could be resolved by the BIOS updated.
    I found the new BIOS for Satellite Pro C50 - A
    http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20140912105436.zip
    Worth a try

    Another question: If someone has done to test a USB external keyboard?
    In the case where the external USB keyboard would work correctly, this issue isn't associated with BIOS or keyboard controller but probably his keyboard fault internal.

  • Satellite Pro C50-A-153 does not not turn on more - overheat?

    LS,
    A week ago I bought a new laptop, a Toshiba Satellite Pro C50-A-153.

    Last night I was watching some micro-credit (looking for a new holiday) and I noticed that the laptop was overheating.
    I hit the market / stop butten and it turned of... later.
    And now the computer lights no more.

    _Situation: _
    laptop was placed on my table, completely cleared of any blokades for air intake.
    The table was heated. Now after hours of reflection, the computer does not work.
    With or without power line in it.

    What should do?
    Erik

    Hello

    Let's hope that Timox tips might work for you.
    In case of workaround won't help you, I would say that some hardware is dead, and so the laptop does not power and more.

    What part of material likely to be affected? Hmm, in the worst case, your motherboard is faulty.
    But I think first of all that some less expensive parts need to be checked for example RAM modules.

    RAM failure would prevent the laptop to boot and so I would check the modules first.
    I don t think there is something wrong with HARD drive because even if the HARD disk is defective, the device turns on but could not start the system.

    But it's a new laptop... so don't replace anything. The guarantee is valid and in the event of hardware problems, the guarantee must cover the laptop repair.

  • Satellite Pro C50-A-153 - Touchpad does not work properly

    First, sorry for my bad English.

    I have a Toshiba Satellite Pro C50-A-153, the problem is its touchpad and not work correctly, the mouse does not move when I move the finger on the pad, it seems that if I had to roll the bar "or the mouse wheel.

    Sometimes, the 'mouse' works for 20 seconds and then again the same thing. An external mouse works fine.

    It is not the problem of the functions "Fn". I tried to stop, reset the battery and press the power button to 50seconds. I also tried to uninstall the drivers for the Touchpad, and I think that I tried to change all the properties on the 'Control Panel - mouse'.

    Can someone help me with this?

    Thank you.

    On most computers laptop Toshiba is installed the Synaptics touchpad driver. With this driver, there are available additional touchpad settings. Try it please change these settings and turn off the features you don't need.

    How to do that you can read on https://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm

    Check it out.

  • Satellite Pro C50 - A - speakers don't put muted when headphones are

    This morning my Satellite Pro C50-A-1E4 suddenly stopped, put Mute speakers when headphones are inserted. Previous messages solved this through a Realtek Control Panel that is not on my particular system.

    Hoping that the fix is easier just cannot find where to put the right parameters.

    Hello

    Usually when you connect earphones in sound properties > speakers of reading should be turned off and headphones must be listed as active.
    Just plug in the headphones and try to change these settings manually. Does not work properly when you do this?

  • Re: Windows 7 on Satellite Pro C50-A-1HQ

    I have a Satellite Pro C50-A-1HQ with windows 8.1 and I'm pretty tired of this OS because of problems with the use of disc 100% that I get sometimes and I have not been able to solve.

    I would like to install windows 7 in this labtop. Do you know if there is a problem with that? Windows7 will work fully? I need to change anything before I install it?

    Thanks to you all!

    I don't know what can be wrong with the use of disk, and I hope that you tried to optimize version of the OS preinstalled.
    I visited the Toshiba download on http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and I found all the drivers, tools and utilities for Win7 64-bit if your machine is fully supported. To be honest I think that your machine will work fine and stable with Win7.

    Before do you anything create recovery disk (DVD or USB) using preinstalled Toshiba recovery disc creator and you can use it at any time if you have notebook with factory again.

    See also http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm

    If you have any other questions you are welcome.

  • Should what ram I use in Satellite Pro C50 - A - 1 M 3

    Hello

    I recently bought the Satellite Pro C50 - A - 1 M 3. Reference number: PSCGKE-00M00GEN and since I have an old RAM stick from my previous laptop which is: Kingston, KVR1333D3S9 / 4G, 204-pin DDR3 SO-DIMM, DDR3 1333, Pc3 - 10600 CL9 204 pins

    I was wondering what would be compatible with my Toshiba laptop?

    Thank you for your time and your attention.
    Concerning
    Jim

    This unit manages the DDR3 SODIMM and these modules supports 204pins

    So I think your DDR3 SODIMM module could be compatible

  • Satellite PRO C50-A-1E0 - failure of Windows 10 - now Toshiba Video Player is missing

    Hi all

    I've updated for Windows 10 drivers recommended by "Toshiba Service Station", all were successful outside of Toshiba Video Player. He said now "our product is not available for update!
    Any ideas? I can't download it anywhere, and the fact that I've updated for Windows 10 recovery isn't available to 8.1.

    Updates can be found here:

    http://win10upgrade.Toshiba.com/swup...=en&country=GB

    Kind regards
    Ian

    It's on my laptop Toshiba Satellite PRO C50-A-1E0

Maybe you are looking for

  • Stability clock embedded FPGA

    Hello I'm looking for more details on the clock embedded to cRIOs stability (mainly 9076). Data sheet does not say much to that. So, what type of oscillator is used for the generation of on-board clock (40 MHz), how accurate is? Without this informat

  • wink/enter and save to file

    Hello I have a few questions about the recording of images to bmp(or jpg) or avi. I started using LabVIEW Machine Vision, so please understand if my questions are kind of ridiculous. I work with analog NI PXI 1409 and CCD monochrome camera capture ca

  • 6830E all-in-one: direct wireless installation

    try to use direct wireless for my all in one printer. The brochure says it is an option, but there is no option on the control panel of the machine to implement? bought for this purpose - can I leave the printer in my trailer on site and I just print

  • Notebook HP 1000: Software related issue

    The direction of travel is reversed after Win 10 installed on my system.The driver has been installed through windows update. Is there a solution to this? It is the origin of the trouble when using the laptop.

  • How to change date if time existed with date?

    Dear friends,I have a table and the date is at the same time with time in the entry_date field.data are like below in the field entry_date01/02/2014 08:00:0308:00:09 01/02/2014my SQL isupdate problemsset ENTRY_Date = 1 January 2014"WHERE ENTRY_DATE =