Power consumption NMH410
Hello
Can someone tell me what is the power consumption of the NMH410, full load and idle?
Thank you
J
Hello
According to the website comments below, the network Media Hub consumes 12 to 13 watts two idle and load.
I hope this helps.
Tags: Linksys Media
Similar Questions
-
Re: Stor.E partner 2.5 "HARD drive power consumption
Hello
My point is, that I m looking for an external drive that uses only 1 x USB and no extra power. (for my plan, I have only a single USB Port free.)
I bought this external hard drive 750 GB.
On its package, it says it works with USB 3.0 and 2.0 and need only 1 x USB Port. without additional power supply via USB or power supply. (on the package do not mount the power consumption.)My problem is, most of the usb Ports (on some PC) are what I have only usb 2.0 a the drive does not not on all Machines.
I Don t understand why Toshiba said, his race on USB 2.0 when he knows that the Spezification USB 2.0 allows 500mA on 1 x USB Port and use Max 900mA drive its almost double the power. So it does not work!
How to introduce the Toshiba, how it works?If I have to take back, because I can't use the drive on all Machines and all Ports.
Please write all the requirements on the package, so I see all the things needed to start on all fittings.Best regards
rehacomp> On its package, it says it works with USB 3.0 and 2.0 and need only 1 x USB Port. without additional power supply via USB or power supply. (on the package do not mount the power consumption.)
I n t have this drive HARD, but here, on this page of Toshiba, I could find the info that this HARD drive needs maximum 900 my
http://www.Toshiba-multimedia.com/global/manuals/store/Datasheet/data%20Sheet%20STORE%20PARTNER_02_09.PDFHere you can find also info that it is the HARD drive works with USB 3.0 without additional power because USB 3.0 provides 900 mAh. In this case, you just a USB 3.0 port. There is a note that its compatible USB 2.0, but can't find the info that it only works with a USB 2.0
-
Pavilion 15-n259se: upgrade to ssd Amp (power consumption) or
Hi all
I have 15-n259se flag which comes with 500 GB seagate with a consumption of 5 v, Amp.451
I bought a 1 TB SSD which have 5V power consumption and 1.5 Amp it will propply function is or is not
NOTE will have 1 SSD has more than normal HARD drive
SRY for bad English
THXNot sure where the power requirement data comes. The SSD uses 335mw at idle and 1.76w read and 3.66 watt to write.
The hard drive uses 810mw idling and 220mw 2.85 watts in standby and 2.6 watts to read to write.
http://www.AnandTech.com/show/8792/transcend-ssd370-128gb-256gb-512gb-review
http://www.Seagate.com/docs/PDF/datasheet/disc/ds_momentus_5400_6.PDF
The SSD draws less power at idle and is good idling more than a hard drive because it ends its operations much more quickly so that it uses a lot less energy over time and in use.
Long story short: the SSD will be fine.
-
Power consumption in power saving mode
The Sony mod or someone else can post the power consumption of the dashboard in saving energy compared to regular operation mode?
Also, it is an energy saving when the dashboard is grayed out or night mode compared to its maximum intensity?
Thank you.
Thank you for your message.
Normal mode: 8.4W
Energy saving: 4.45W -
After that I put my windows XP Professional desktop in hibernation, there will be a power consumption?
No.............
-
GPS power consumption difference?
I have read the API documentation and found that we can define GPS power consumption in the criteria, my question was how this may affect the difference device and what is between Low, Medium, High? He is influential on the response time, accuracy or what (next to power consumption, of course)?
Cost, accuracy and power consumption are all the selection criteria for JSR - 179. Instead of explicitly select the location provider you want (autonomous (gps), assisted or cellsite) makes it JSR you define a set of acceptable criteria then the API decides to give you based on the features of the device and the network.
This link has the table which shows what environmental criteria which suppliers of location...
This theme has a table which specified the capabilities of BlackBerry devices...
-
Calculation of power consumption and data room AC
Hello
Try to understand my energy consumption of servers in respect of the installation of a new AC unit and potentially adding a UPS battery pack. Certainly not I consider myself an electrician so I would value your input.
I based my calculations this article where, in essence, the formula is: equipment BTU = total power for all equipment x 3.5
Q: is it safe to assume that if a server has a dual power supply to double the power used?
After digging by some docs of dell and random sites, I gathered the information following, and I don't know if it's the correct support :
Power double Power in watts Total power PowerEdge 850 None 345 345 PowerEdge 1550 None 240 240 PowerEdge 1750 Yes 320 640 PowerEdge 1750 Yes 320 640 PowerEdge 1850 Yes 550 1100 PowerEdge 1850 Yes 550 1100 PowerEdge 1850 None 550 550 PowerEdge 1950 Yes 670 1340 PowerEdge 2850 Yes 700 1400 PowerEdge 2900 Yes 930 1860 Large total power: 9215 Required total BTU: 32252.5 1 ton of cooling = 12K BTU about needing a 2.6-ton air-conditioning unit.
That sounds right? Your thoughts?
Certainly I'm not including the size of the room etc. but I wanted to just make sure that I am calculating the consumption of servers correctly. I also read that they start just numbers, and the number of disks in raid and memory sticks to the server will take more power... something that... is the addition of 10W by the disk/memory stick - it true?
Thanks for your time!
No, you must use the pliers on the individual wires, not more of 3 or 4 wire bundle to a cord. Better to find the track to the circuit breaker box, remove the cover and block it on one of the legs of the off circuit breaker. I would like to leave plug in for a day, exercise oversight for peak power consumption. You will need to get lighting consumption included in total and heat through wall, floor, ceiling, door gain.
-
Power consumption of SRP520-U series
Hi all
I was wondering, how many series to do the SRP520-U real power draw?
Compared to common quality home devices, I think that energy consumption is above average?
Thank you.
Depending on the device and its configuration, they will build between 4W and 20W.
Andy
-
SGE2010 and SRW2008: power consumption and noise level?
Hello!
I am looking for information on the actual noise level and power consuption produced by the above mentioned models.
Many thanks in advance,
Luca
Luca,
Consumption of energy and other attributes of physical products keys in the next document (in the documents section of this community):
https://www.myciscocommunity.com/docs/doc-8669
WRT to noise levels, they are here:
SGE2010 - dB 51.4
SRW2008 - N/A - there is no fan inside this switch - use and external power supply
Thank you
Ivor
-
Power consumption (watts) of Equium A100-147
Anyone know what is the power rating on the computer satellite phone?
I want to buy a car charger but there are two models in the shop an assessment @ 70 Watts and the other assessment @ 120 watts. Any ideas?
Concerning
Hello
AFAIK the Equium A100-147 supports an AC adapter 15V 6a 90W.
In my opinion if you want to buy a compatible car adapter you should seek the 15V - 6a compatibility! -
HP 15r205tu: i3 5010u, uncore after sleep and wake up power consumption increases
After start of the uncore cpu power remains unused 1W (according to the CPUID HWmon) below.
If you sleep and wake up the laptop, then the uncore power increases to approx. 2W.
Time remaining on the systray icon is touched by it.
Navigation on the duration of use of a low-power battery is reduced after sleep wake cycle.
Is this a known issue? Is there a solution?
Thanks for the post and suggestions.
Now, I know what has caused this problem. I had turned off the network adapter cable into the Device Manager to save energy!
This caused the uncore somehow to go crazy and pointing up (only after the day before). Now, I have activated the wired lan card and all is well. The laptop can be used for about 9 hours on battery power saving mode now sometimes the loading of web pages.
Thanks again.
PS: If any unused pci express port is disabled it can lead to the same behavior.
-
Standby and Active Power mode consumption
Hello
Can someone please provide us with the energy consumption per TANDBERG C40, C60, 1700MXP and SX20 in Active mode and standby.
We have a test on demand and need this for comparison.
Kindly help as soon as POSSIBLE.
Concerning
Akshay
Hello Akshay,
You can download the document in this link that will give you detailed information about the power consumption of the device of Tandberg: http://www.mediafire.com/view/?pb6bk7gcp30kb0r
Thank you
Prashant Rawat
-
Heat dissipation and the consumption of power for SG 100-24
Hello
I need to know the following information on the model of switch SG 100-24
- power consumption (watt)
- thermal dissipation (BTU/hour)Please may somebody help me out on this ?
(by the way such information is not in the Cisco documentation)
Thank you,
Aplologies for the late reply. By genius:
-power input (watts) 23.9W @110V
-heat dissipation (BTU/hour) 81.55 BTU/hour
Thank you
Stephanie Reaves
Small Business Technology Group
-
What is the power consumption of my 27 iMac late 2009 model, while in mode 'sleep'?
Energy consumption and thermal information for iMac - Apple Support
-
HP probook 450 g1: route power hp probook 450 g1
I'm here to ask a question about the road that the flow of electrons inside my question computer.this is intended for professionals from the hardware store. When I plug my laptop, does the power:
(a) goes to the battery and the laptop is powered from the battery
or
(b) divides into 2 courses, a turn on the computer, the other charges the battery and the computer is not drawing power (or draws less power) battery
or
(c) other. Please explain
I ask this question because as you know, the battery is lithium-ion, and it has a limited number of cycles (full charge of the battery is a cycle, charge 1 / x battery is 1 / x of a cycle). When the battery reaches this limited amount of the cycle, it will start to deteriorate, taking less fresh and possibly output low voltage. Since I am a hardcore gamer (I know many of you yelling at me because using a computer laptop, no, let me correct that: a portable desktop overpriced for play games, but I had no idea of the game in mind when I bought it.) However, it can still play a lot of current gen and gen following some games on low or medium setting). so when I am gaming, this battery can drop from 100% to 10% in just 30 minutes. and given that I spend anywhere from 5 to 12 hours a day game on weekends and about 1 week, so power consumption is quite high.
If the answer to the above question is, my battery is pretty f * ed (I know that the battery on this laptop is easy to remove, but I will not remove a lot because the last of them is probably due to a problem with removing the battery regularly, but I don't see any damage that could be done to the battery if it is removed on a regular basis).
But if the answer to the above question is B, then my battery will be complete very well because not many cycles will be used, as opposed to A that will completely destroy the number of cycle.
and if the answer is C, then explain it please and if possible, tell me what effect this will have on the battery.
Hey there,
do not know the technical details, but I have a G1 450 myself and I also do some game. It is now about a year and a half and I have mostly kept the inserted battery, because A it does not heat even when the rest of the system doesn't and B, it seems that load MCE circuit leaves only when it detects its fully charged. He did not lose a large part of its load, because I use especially the pc connected to the AC adapter and the battery does not several cycles. The number of cycles of battery check confirms it.
So you shouldn't really be a problem prevents the battery where it is. But if you do a lot of game, remember to use a can of compressed air to clean the air openings regularly.
See you soon
Maybe you are looking for
-
activation of the iPad or (lost?)
2016/2/4, in the morning, my ipad still worked as my clock. I checked my ipad for fb message after lunch, my ipad said he was lost and deleted. Enter the Apple ID and password that were used to put in place this ipad. It's my ipad bought on apple sto
-
FN + F8 on my Satellite L505 does not work, I can not activate WLAN card
I take my laptop up yesteday, suddenly, it can not conntect to the wifi, when I check 'manage wireless network', he says not currently 'enabled. Is the only way I know to press FN + F8 key to turn on my wireless... but when I press FN f8 key does not
-
What happened to the HP Software and Driver Downloads for my HP ENVY 15 t-j000 Quad Edition CTO Notebook Model # C8P48AV built in July 2013? There were 58 results software and driver for Windows 8.1 64-bit last week when I printed the list last week.
-
JB soak Test for XT912 - using old kernel ICS?
Hey people, Just curious to know a few things about the trial of impregnation... My boyfriend showed me his phone and I have a pull and was satisfied with the fluidity of the operating system. There was something that I noticed though. When I checked
-
Hoe erase files with Windows Media Player
When I try to delete a song in the media player, it is not deleted. Most of the time I find a song here two or three times, but I cannot delete them. [Moved from comments]