SGE2010 and SRW2008: power consumption and noise level?

Similar Questions

• On the screen when you use the shortcut keys to change the brightness of the gauge and noise level have disappeared?

  Running Windows 7 Home Premium (64-bit)

  I don't think I've changed all parameters that could lead to disappear. Is it possible to get them because I found them useful, watching a movie etc.

  HP pavilion g6.

  Hello

  Download and reinstall the HP OSD utility at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55152.exe

  When that installation is complete, restart the laptop.

  Kind regards

  DP - K

• Calculation of power consumption and data room AC

  Hello

  Try to understand my energy consumption of servers in respect of the installation of a new AC unit and potentially adding a UPS battery pack. Certainly not I consider myself an electrician so I would value your input.

  I based my calculations this article where, in essence, the formula is: equipment BTU = total power for all equipment x 3.5

  Q: is it safe to assume that if a server has a dual power supply to double the power used?

  After digging by some docs of dell and random sites, I gathered the information following, and I don't know if it's the correct support :

  	Power double	Power in watts	Total power
  PowerEdge 850	None	345	345
  PowerEdge 1550	None	240	240
  PowerEdge 1750	Yes	320	640
  PowerEdge 1750	Yes	320	640
  PowerEdge 1850	Yes	550	1100
  PowerEdge 1850	Yes	550	1100
  PowerEdge 1850	None	550	550
  PowerEdge 1950	Yes	670	1340
  PowerEdge 2850	Yes	700	1400
  PowerEdge 2900	Yes	930	1860
  	Large total power:		9215
  	Required total BTU:		32252.5

  1 ton of cooling = 12K BTU about needing a 2.6-ton air-conditioning unit.

  That sounds right? Your thoughts?

  Certainly I'm not including the size of the room etc. but I wanted to just make sure that I am calculating the consumption of servers correctly. I also read that they start just numbers, and the number of disks in raid and memory sticks to the server will take more power... something that... is the addition of 10W by the disk/memory stick - it true?

  Thanks for your time!

  No, you must use the pliers on the individual wires, not more of 3 or 4 wire bundle to a cord. Better to find the track to the circuit breaker box, remove the cover and block it on one of the legs of the off circuit breaker. I would like to leave plug in for a day, exercise oversight for peak power consumption. You will need to get lighting consumption included in total and heat through wall, floor, ceiling, door gain.

• Start of satellite L10 fan speed and noise

  My L10 cooling fan start always maximum speed, when it turns on it always burst at maximum speed (and noise) and then slow down to a speed (and slient relative). This fan start noise is very annoying (as fan departure every half hour in office work and every 15 minutes in some simple games).
  I try muffler or bios settings performance they do not fix the noise and the starting speed.
  Maybe Toshiba could release some bios update or patch or something to fix this? (my bios version 2.0)
  Maybe this problem has the solution software thrid party?
  Or the fan speed max is just a hardware problem?

  Thank you.

  Hello Albert

  The same thing my Qosmio F20 and in my opinion, it is not any kind of technical problem. At the moment I'm typing this text and hear Internet radio at the same time. The cooling fan works regularly.

  In my opinion, when the operating system runs several different processes running in the background and they need the CPU activity that needs to be cooled correctly. In my opinion, you should check the power settings management settings and change the performance of the processor to lower the level.

  If the cooling fan runs every 15 minutes, in my opinion, it is not too often.

  Good bye

• Possible bug in sv_Harmonic distortion and Noise.vi

  Hello

  I ran into what seems to be a bug in distortion and Noise.vi sv_Harmonic

  I call this VI into a higher level VI which is part of the box sound & Vibration tool (SVT SNR without harmonic (time) (1ch) .vi)

  What is happening is that I sometimes get error 0xFFFFB1A3 (-20061):

  Error-20061 occurred at NI_MABase.lvlibine Waveform.vi:22 > NI_MABase.lvlib:ma_Trap Fgen parameter Errors.vi:1
  frequency must be<= sampling="">

  Possible reasons:

  Analysis: The selection is not valid.

  This error is actually produced in distortion and Noise.vi sv_Harmonic by one of his subVIs (your unique information (complex) .vi svc_Extract) although I'm not able to activate debugging for this VI so I can't dig deeper.

  What seems to be the case, it is for certain fundamental frequencies that result in higher order harmonic which is located very close to Fs/2, you get the error.  I have attached a waveform and a simple VI that generates the error.  My debugging, it seems that the error occurred when the code attempts to extract the harmonic at 5119,53 Hz.  FS/2 is 5120Hz, so it must be valid, but generates an error.

  Thank you

  -mat

  Hey Matt,

  I spoke with R & D and the source of this problem is we're detects peaking at exactly the Nyquist frequency for the 127th harmonic, while it should work, we get the false error. To work around the problem, you can specify the frequency range of 0-126 harmonics as seen in the image below.  Have one less harmonic should not be a big problem as the harmonic 127th is anyway in the noise.  R & D is now aware of the issue and look forward to it.   Thank you!

  

• F55 low light bands and noise

  Need help.

  We have some problems when shooting in low light.

  http://antosch.dyndns.TV/owncloud/index.php/s/mKOEqbsXQrwFVSn

  You can see bands and noise in the viewfinder and screen on board as well as on the pictures.

  Also more brightness also enhance the effect.

  The parameters are:

  AE Slog3 movie

  MPEG 25 1920 x 1080 p

  Exhibition index 3200

  MLUT LC709 Type A for the viewfinder and SDI

  
  

• HP OfficeJet 8600 not return status and ink levels

  Hello

  I have a new one (from this summer) a model HP OfficeJet 8600 (N911a) AIO

  Just run out of black ink on startup of the cartridges provided all.  At purchesed an Office Jet Valuepack 951XL and 950XL in preparation.

  So I replace the Starter 950 black void for the black of 950xl, all ok thing prints, scans/copies fine

  But when I launched the web interface to check the status of the printer status and ink levels are in red and I can't get the ink gas monitor section.  Screen attached.

  If I try to launch the HP printer Assistant for model nothing happening!

  Any suggestions please?

  RGS

  Steve

  

  Hi all

  OK I solved this problem. But since then, I had cause to rebuild my main desktop PC is so BRAND new HP software has been installed and the question has not reappeared.

  Thanks for everyone for entry

  Steve

• Cannot run or debug app on the device after the update Momentics 2.1 and api level to 10.3

  Dear Blackberry support

  I have improved my Momentics IDE to 2.1 and api level to 10.3

  After upgrade I can not run my application package, and when I run the Momentics show pop up error:

  Click here to see the photo of the error

  I don't know what is happen?

  Please help me solve this problem, any help is appreciated!

  Thank you

  Hey,.

  Finally, I found the solution for this problem

  Create new project of Blackberry (just create an empty project) and then copy all the CBC, assets of the old project to the new project, also the bar - description.xml and .pro file

  And now everything is ok.

  Thank you for all your help

• Dumpsters and noise in audio and video players

  Hi, all my audio and video players in the laptop, the present jump (interruption) and noise, while playing, can someone help me please?

  Hi Sergiorey,

  This problem can occur if the device controller or audio sound card is out of date.

  I suggest you to see the following link for more information.

  Play an audio or video file: frequently asked questions (what can I do on the audio problems, such as popping, crackling, or sound that plays too fast or too slow?)

  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions

  Post us the results once you try the steps above.

• grain and noise

  Feeling discouraged this morning with a box full of rejections.  The reason to reject this photo was grain and noise.   I am perplexed, because it was shot at a relatively low ISO and seems fine on my iMac.  What do you see?

  @Ruth Bergen Braun,

  Thank you for writing and sharing your photos. I think that we could get this one wrong. I checked the file at full resolution and it looks great to me. I cancelled the rejection and upload the image. Keep more content coming soon!

  Kind regards

  Mat Hayward

• How can I remove grain and noise of my "rushes". video was filmed during the night with poor lighting and a digital SLR

  grain and noise reductiom

  As already suggested, video Neat.

  https://www.neatvideo.com/

  Embarrassing bad web site, very good product.

  Don't forget that in addition to the expense of the plug-in, noise reduction is a very intensive rendering process - and so you have the payroll to the supplementary budget to make files.

  Do a test on excerpts and see if it works well enough for you.

  If so, edit without making the noise reduction and, once you have the material cut down to just the sections that need a treatment, do your the noise reduction on all this material.

  MtD

• VLANS can be configured at the vSwitch and Portgroup level?

  Dear friends,

  I hope that all do you good...

  Two statements are true about groups of ports and VLAN defined on a switch vNetwork Standard? (Choose two)

  A. A VLAN can be configured for the entire virtual switch or on groups of individual ports

  B. several groups of ports can specify the same VLAN

  C. VLAN can only be configured on individual port groups

  D. several VLANS can be specified in a port group

  VLANS can be configured at the vSwitch and Portgroup level?

  B. several groups of ports can specify the same VLAN

  C. VLAN can only be configured on individual port groups

• Can anyone help? My catalogue LR4 suddenly started showing pictures to folder and subfolder level 0, only shows that good number of images to the file level. Help would be most welcome. Thank you.

  Please can someone help?

  My catalogue LR4 suddenly started showing pictures to folder and subfolder level 0 and only shows the correct number of images at the file level.

  Your help would BE welcome.

  Thank you.

  Click on the sign in Control Panel folder + and check "display the Photos in subfolders.

  

• Heating and noise problem laptop while streaming

  If I open several tabs of youtube. And online streaming. I noticed intense heat under my palm and noise. I also notice jumps high processer in the Task Manager. A couple times my machine stops, too. (probably due to heating of the processor).

  To avoid this situation that I should get more RAM? Currently I have 1 GB. And running Windows 7 on my Lenovo N200 0769.

  Any help or recomendatiosn will be appreciated.

  Thank you.

  Search for dust accumulates on the radiator cooling fins.

  Located under a Panel on the bottom, blow out with

  compressed air or using a soft bristle brush.

  And more ram (2 GB total) can't hurt!

• Difference requestlevel and operational level

  Hello
  
  I have to do a presentation on IOM next week and I'll have to explain some concepts of the IOM to people who have never heard of the IOM.
  However, I'm strugging with the difference between the operational level and the level of query of an application.
  I set up this fine in my approval of IOM policy, but I'm having a hard time explaining this to others.
  
  Anyone who could help?
  
  Thank you
  
  Steven

  Level of demand:

  level 2 of the approval process
  Application may be rejected in 1 shot
  At this stage no request child

  Level of functioning

  level 3 of the approval process
  Request of parent will stop in the child at this stage applications
  Each request of the child can be independently approve/reject

  http://docs.Oracle.com/CD/E14571_01/doc.1111/e14309/request.htm#CIHIEEHF

  Published by: Rajiv Dewan