Power failure/loose Power Bar power cord

I want to run a few questions in front of the members of the forum:

Last week, my power bar power cord became loose and off the bar, which stops the computer and the monitor. The monitor has a power button function.

Before that other devices in the power bar are turned off and unplugged, until the power bar is turned off, until the power is reconnected, until the power bar is turned off, before other devices are plugged in, and before that the devices are suppressed:

1. in the event that the computer and the monitor will turn off (as they were in the position 'On' when they stop unexpectedly) "or" there is no 'Off' option either on the computer, the monitor, or both devices so that they can be disconnected and reconnected since they will be in the position "Off"?

2. If the computer and the monitor are 'On' when they turn off automatically during a power failure, can they be left alone without the risk of a wave when the power is restored, OR is there a risk of a surge?

b. is there "is" a risk of a surge because they are still in position "On", should they be disabled (or they are already in the "Off" position?) unplugged and should bar be off and unplugged then until the power is restored?

3. in fact, during a blackout, should all appliances be turned off and disconnected, so there is no risk of a circuit breaker of the circuit limit, causing a power surge, or if all appliances can remain plugged in and left in their respective "On / Off" position since before the failure?

Hello

Sorry for the late reply.

It is advisable to have the power with a surge protector bar in areas where the power failure and the cutting power is often or generally just to ensure the security of your system and in particular data. If in your region, power failure, power failure is rare, so you can avoid surge protector.

Hope, I could answer your query. Feel free to post on the forum if you have any concerns more associated with Windows. We will be happy to help you.

Kind regards

Tags: Windows

Similar Questions

  • monitor turns off not by the switch at the top. power cord seems loose at the back of the monitor. just need a

    I have a hp w2338h monitor, running Windows 7 and I am unable to turn off the monitor through the top switch. The power cord seems loose in its connection to the monitor. Do I just a new cord or something else is necessary?

    Thank you.

    Hello

    Try to push the power cord firmly upward.  It should not move when it is completely inserted.

    Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.

  • Portege M200 - connection loose in the power cord

    Hello

    After almost 5 years of intensive use (this is the 3rd battery which is currently begging for replacement...) my M200 still works fine - great device!

    However, the power cord has a bad connection for a few weeks now. The problem is located next to the DC plug. So, whenever I connect the M200 to food, I need to turn and bend the cable in order to reactivate the charge current. Friend of mine, a 2004 purchased another M200, exactly the same problem.

    Problem: The power cord is fixed on the transformer, and a new Toshiba 15V power is quite expensive (if you manage to find one, anyway...). Is there a solution to fix the cable (or get a replacement cable / repair kit) rather than buy a new power supply?

    Thank you!

    Florian

    Hi mate,

    AFAIK there is no repair kit for this problem. You must buy a new Toshiba AC/DC adapter because a cable can t be repaired.

    I know it's so cheap, but maybe you can get another compatible adapter AC/DC to an authorized service provider. Many AC adapters are compatible to different notebooks, so maybe a cheaper is available.

    Here you can search for an ASP to give them a call:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  • Pavilion DV2000 power cord failure

    I went through several power cords for my laptop Pavilion DV2000Z. A couple of them felt like they have overheated. The biggest problem has been that they fail to power the laptop. I do all connections, no power. I find that I need to move the connections and/or by shaking the whole string in order to get the cord in just the right position it will provide power.

    A little while ago, I heard a cracking sound, like electric sparks. I looked down to the power supply cord and smelled burning plastic. I have one plugged in the power cord, waited a few moments and it reconnected. I found when I waved the portion of the rope connecting the output to the control area of power that I continued to hear the Crackle.

    The technician gave me a link to find a center of HP in my service, and with a search of 900 miles, there is nothing here. I told them this, and now they have me call the helpline... wish me good luck with that. * Rolleyes *.

    I had a few other problems with this computer that have been resolved quickly and effectively, but this problem of power cord is endless, and it seems that all my replacements have been rehabilitated. It is the first HP laptop, I bought and the last... my next will be a Lenovo/ThinkPad.

    Anyway, if anyone has experienced this problem, and if so, were you able to get a power adapter that seems as if it will actually last as long as the computer is? Any suggestions? Thank you!

    Let me know!

    I ordered their client of this site. Click here.  Not bad for $4.

  • My time capsule 2 TB suddenly stopped working after 14 months, is possible to be to power Sunrise again? I tried a new power cord and the different points of sale.

    MY time capsule 2 TB is is no longer under tension after 14 months. I changed the power cord and made sure that the work of output and still no power. Is it possible to fix it?

    Yes. You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

  • 11 #ABA K2L95UA flow: power cord in bulk

    My flow is 9 months old. I noticed that the power cord has a lot of movement where it plugs into the notebood. I'm afraid the connection inside the laptop may fatigue and either bypass or fail to connect.

    I was very careful with the connection and the laptop has never been dropped or jerjed by the power of the cord.

    How I have this problem still under warranty?

    Connect with HP Services to repair the loose connector. Click on "Contact HP" link below...

    Kind regards

    Louis

  • Equium L40-156 - power cord melted!

    My daughter just called me in a panic that his Toshiba laptop power cord started smoking and melted!
    The laptop is about 2 years old.

    Does anyone else have this problem that I wonder? do you think it is safe to use with just the battery? Don't know what to do about it - any advice would be welcomed!

    Thank you

    I would not use the laptop, the power failure may have damaged components of the laptop.

    You have to send the laptop adapter + cable to a service provider authorized to ensure its all working properly.

  • All-in-one DELL power cord

    I have a Dell all in one that is about 4 years old.  The other day I started up and used for a bit.  I left to go eat and when I came back the computer was off.  I tried to push the power supply, check the power strip and made sure everything is properly connected.  No change.  I noticed that the ring of blue light around the power supply is turned off, so I unplugged the computer and the power strip.  Plugged in the power band and the light is on.  Fantastic, until what I plugged it into the computer where it was released.  I tried some other power cords (same size, etc.) and that they would also have slight shift when connected to the computer.  What can I do to fix this?

    Best to remove your serial number.  You have an Inspiron One 2020

    The motherboard can be stop due to internal failure.

    Card converter or another motherboard problem.

    Dell MKTK1 48.3HC02.011 Inspiron One 2020 LED converter Board

    https://www.Amazon.com/Dell-Inspiron-MKTK1-converter-48-3HC02-011/DP/B00N28VFE2

    If the culprit could be your power supply internal or internal 3V CR2032 lithium cell battery. To remove and replace the coin cell battery is fairly intensive.

    https://www.Amazon.com/Dell-Inspiron-computer-power-adapter/DP/B00URXC86O

    More languages
    More languages
    More languages
    More languages

    225-2882: Inspiron One 2020 with Energy Star 5.2 in conformity

    317-9687: processor Intel Pentium G620T (2.20 GHz, 3 MB Cache)

    317-9652: 4 GB MEMORY DDR3 SDRAM TO 1 333 MHZ-1X4G B

    331-3354: Dell KM632 WL KB and MSE - U.S.

    320-3236: 20 "high-definition (1600 X 900) LED no touch

    320-3238: Intel HD Graphics 2000

    430-4696: 802.11b/g/n, BT4.0 DW1703

    342-4367: 500 GB SATA hard drive 7200 PR M

    421-5693: Windows 7 Home Prem 64-bit, English, without media

    410-0547: adobe Acrobat Reader

    318-1971: 8 X DVD tray loading CD/DVD Burner P 9.5

    430-4737: Dell 1703 Wireless 802.11b/g/n, Bluetooth v4.0 + THE

    331-0458: U.S. power cord

    331-6724: MOD, ADPT, AC, 130W, CLFD, 3 P, L6, WW

    331-5886: location parts-English/Spanish/french nch

    331-6728: MOD, PLCMT, 2020, GBL

    331-6726: shipping material, Direct

    410-0569: McAfee 11, 15 months

    331-6727: Resource DVD, Inspiron One 2020

    421-8184: additional software

    331-7678: LBL, REG, AIO, 2020

    410-0450: Microsoft Office Starter

    420-8878: Dell flexible contracts home

    421-4356: software, GB DataSafe Online 2.0 2

    330-0172: S and P Marcom drop-in-Box for desktops DHS

    331-6725: MOD, LBL, REAR, IO, W/O TVT, 2020

    310-5678: mouse included with the purchase of keyboard

    430-3322: 10 / 1000 Ethernet built-in

    331-2594: integrated 5.1

    730-1929: fixed Hardware Configuration

  • Power cord for my iMac has crunched, how do I get a new one?

    What I do my power cord for my iMac has been chewed and I don't know if I can claim the title of the guarantee or if I should just buy a new...

    As I can use it only if I put in some way and cannot be pulled.

    If the plug of your end iMac has this form:

    Then the power cord to any standard computer work.  It may not be

    White enough with the beautiful fitting molded but it will work.

  • Indicator light power cord

    That means the light orange on the power cord?

    Support actively at a high rate.

  • After resetting the iPad to default it show that the power cord is trying to connect to iTunes

    I got an iPad 16 GB factory reset default after a while display only the power cord going to iTunes, need help to get this operational back, it worked Ok before resetting all we have tried to make clear the former owner information

    The iTunes icon and cable image means he went into recovery mode, you will need to connect it to iTunes to your computer to reset the iPad, and you can then restore/resync your content.

    If the previous owner had not disconnected from the settings > iCloud on it and find my iPad has been activated, you will need to communicate with him or her: disable find them my iPhone Activation Lock - Apple Support

  • A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

    A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

    Yes.

    http://www.Apple.com/Mac-mini/specs/

    the voltage may vary from 100-240 V AC.

  • Power cord from the airport

    Is the power cord for the airport bought in Hong Kong not usable in the Canada?  My airport does not at all.

    The airport itself base can work with a variety of outlet power settings, but the types of decision-making between Hong Kong and the Canada are completely different. Base station supports a range of 120-240 v, 50-60 Hz energy sources. The other thing to consider is that the radio channels used may differ between these two countries.

    Sockets (120 v, 60 Hz) used in the Canada is similar to that used in the United States and look like one of the following conditions:

    While in Hong Kong (220v, 50 Hz), they use the following type:

  • My iPad displays a symbol of power cord and iTunes

    I tried all things hold sleep button to connect to the computer, then hold power button waiting and then start your computer repair but the iPad won't do anything except show the same screen, then after a few hours, the iPad is going to a dead battery. I tried to put the power cord but just ping guard. HELP Please,

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

    More info here:

    https://support.Apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • Power cord

    iMacs come with a single power cord.

    Is it safe to just plug the straight iMac in the mains or via a power Board?

    You can connect either. Both are safe as long as the power strip is approved by UL.

    See you soon,.

    GB

Maybe you are looking for

  • Satellite Pro M40X-244: really the life of the battery

    Please, I need the following information to check the proper functioning of the battery. The technical specifications of the laptop shows:Max battery life: 03:16 (Mobile Mark) hours.But my laptop battery happens very quickly (hour) to 50% and then en

  • How to keep the order of photos in an album for a pound of apples

    How to maintain the order of photos in an album when moving pictures to create a notebook from Apple?    They are placed in the book of the order of date, but a lot of my photos are scanned and have nothing to do with the date of the photo.  I use ve

  • Cancel transfer migration assistant

    I used migration assistant and time machine for all transfer from my old mac to my new mac. I really wish that I had not transferred applications.  Is it possible to get it back to how it was sent to me? Thank you very much!

  • MSXML6_x86 will not install updateing KODAK ESP 7 printer

    I'm running windows XP (sp3) installed when you try to update my kodak ESP 7 printer with Version 7.6, it comes out of the old software, then stalls when it comes of retries MSXML6_x86.msi will not work and cancel cancel just to uninstall everything

  • I have a printer HP Photosmart 3180 and use a Mac

    I get the following message appears when I try to print: / user/libexec/cups/backend/usb failed. I can print a test page, so I know that the USB cable is OK