Power HP 400-034 failure Slimeline 3rd time

Similar Questions

• HP Pavilion Slimline 400-034 does not illuminate

  Hey all,.

  My grandparents bought a HP Slimline 400-034 from Bestbuy (refurb, sigh), or all of a sudden only put up now after he have 4 months. When I plug the power to the PSU cables, the led is green. When I hit the power button, the CPU fan turns quickly, but the computer will not feed.

  I am quite sure that the power supply is good because it has the green light to the rear, and the CPU fan turns briefly. I unplugged the CD-ROM and USB ports in the front to reduce the load of power, but it will still be running. Is the Mobo that made, or is there something else I can try?

  Thanks in advance!

  Follow the steps described in the guide. My opinion is that the power supply is BAD. These PSU's TFX.

  The HP site gives a measure 7.9 x 3.3 x 2.1 "NewEgg has replacements here and here

• Games works more slowly for the 3rd time.

  I suspect that my graphics card is corrupted/confused.  A few weeks ago, I was able to play all my games on graph high resolution of 1440 x 900, but with shadows.  About 2 weeks ago I had to give up all my games at the lowest effects and the resolution to 1024 x 768.  Now my games won't work for about 15 minutes and that the framerate will drop severely.  I ran Furmark and my average FPS was 8... I cleaned the inside of the computer, defragmented, it, ran CCleaner, updated my card system restore, I tried to graphics.  This is the 3rd time I've had this problem.  Is my just messed up graphics card or somehting?  Here are my specs.  If I left something out let me know.  I have this PC for about 3 years.

  Microsoft Windows Vista Home Premium version 2006
  Intel Core 2 Quad Q9300
  nVIDIA GeForce 9500 GS (D9M-25)
  3 GB memory

  Hello

  If you want to improve performance, then you will need to replace the power supply and buying a video card.  Look at what this site is for a video card for BBC 2.

  Look at the NVIDIA GTX 460 1 GB as a possible choice for a video card.  The CX500 Corsair has enough power for the NVIDIA GTX 460 1 GB.

  You might do some research on what the gamers who use 2 BBC are recommend for a video card.

• Pavilion Slimline PC 400-034: network driver

  Hello

  I'm looking for a driver for the CARD from Windows 7 for the network interface port in the PC of HP Pavilion Slimline 400-034.

  I'm trying to configure this computer to an old man who does not want to learn Windows 8, Windows or Windows 10 8.1.  It has been very well with Windows XP until his old computer is dead.  Now I'm creating running it with this Slimline 400 computer, Windows 7.  I installed the WIFI drivers.

  PLEASE, PLEASE, PLEASE; Do not answer me with a hyperlink to the web site H - P driver download page.  I've tried, and H - P has only the options Windows 8 and *. 1.  He doesn't like the fact that I want to put Windows 7 on this computer.  Please tell me the NAME (or the MS code) network driver and I'll go find it on the internet (Yes, that seems to be the fastest way) without due respect to the people of H - P.  I need the driver for the CARD.

  Can someone point me in the right direction?

  Thanks in advance!

  Hello:

  Here is the link to the ethernet driver, you must...

  This package provides the original driver for Realtek PCIe family network controller solutions in the supported models that are running a supported operating system.

  File name: sp57359.exe

  If you need any drivers for this PC, please let me know.

• Failure of the Time machine backup could not save "My Passport"

  When I try to do a backup on my Passport using Time Machine, he used to work over the years, and now it is the message I get:

  Failure of the Time machine backup could not save "My Passport"

  
  

  Does anyone has an idea to help me with this problem?

  
  

  (Sorry for my English but I speak French in Switzerland...)
  

  Have you tried to run utilities disk to check/repair the external hard drive? Here is something you can try.  http://pondini.org/TM/A4.html

• For the 3rd time Ive been w / I have my PC 4 months or more. It is intolerable, cannot protect my data.

  Will not feed! Cannot back up or restore my backups.

  Hello VinceBarnes736, welcome to the Forums of HP.

  It seems that your laptop not turn on and you are unable to restore your backups. I want to help you with this.

  You mention in the title of the thread that it is the 3rd time and you've been without laptop for 4 months or more. Could you give more details on the issue and what happens?

  What PC do you have? (provide the model number and product if you can)
  What is the operating system on the PC?

  This document can help with the startup problem: computer won't start (Windows 7, Vista, XP).

  If you are looking for help on the issue, please respond with as much detail as possible.
  Thanks for posting on the HP Forums.

• HP Pavilion Slimline network driver Windows 7 400 - 034

  Hello

  I'm looking for a driver for the CARD in Windows 7 for the network interface in HP Pavilion Slimline 400-034. I found that it once before and that you don't not saved when originally, I got rid of win 8. Now, I am due for a format and can't seem to find the driver.

  Can someone point me in the right direction?

  Thanks in advance!

  Hello:

  This driver should work.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-100798-1&cc=us&DLC=en&LC=en&OS=4063&product=5231505&sw_lang=

• HP Pavilion 400-034 8 windows product key?

  I just bought my pc last month at best buy (pc hp pavilion slimline 400-034) on all PCs "s that Ive had the activation key is 0n a tag, I'm not." I have serial # product # (xxxxx-xxxxx-xxxxx-xxxxx-QGJXW) then I get a message that this is not the correct activation key? but I do not remember entering any key activation HELP

  You are looking at a different type of number: serial No. or such. There is no visible key with 8 victory. It is built into the bios. The sticker with the key has been abandoned.

  Xxxxx you see represent the actual figures/letters but are not visible to you. It comes to combat piracy. Learn more about the activation of windows 8 on the web.
  Your computer has already been activated at the factory.

• Qosmio F60 - 11F - problem of failure of HARD drive for the 3rd time

  Hello

  My Toshiba Qosmio F60 - 11(f) does not continue 6 months with me until a HARD disk failure that happens with the same massege (failure of HARD drive on disk0 hard to predict Intel SMART)

  I took my laptop to the service center for 3 times now, and I would like to fix this kind of problem for good and do not reproduce.

  Qosmio F60 - 11F
  Serial number: 6A093786H
  E-mail: [email protected]

  Thank you

  Hello

  The HARD drive may begin to malfunction because it s a part not reusable.
  I'm not very well why the HARD drive starts to malfunction in these times early in any case the party m can be replaced very easily and usually you don t we had to send the laptop to the ASP.

  Get in touch with an ASP and ask compatible HARD drive. If it s covered by the warranty, you should get so much for free, otherwise you will need to purchase these parts.

  However, here you can check how to replace the HDD:
  * Qosmio F60 HDD *.
  + http://aps2.toshiba-tro.de/kb0/CRU07030A0000R01.htm+

  welcome them

• HP Pavilion23 - f250 Cyberlink Power DVD driver installs loop without end 3rd time trying

  I recently tried to upgrade from 8 to 8.1 Windows (which succeeded) but when trying to update the drivers, the latest driver to date has been the Cyberlink Power DVD driver turns in an infinite loop.  I tried twice to install the drivers with the same result.  Any suggestion or help? Please, I beg you!   It is worth noting that I have updated Windows 8 to 8.1 thank you!

  Hello

  Try to install this application Cyberlink PowerDVD for Windows 8.  If it works then download a new copy of the updated Windows 8.1 Cyberlink PowerDVD. If you encounter the problem again then you have to reinstall all the software Cyberlink Windows 8 before installing Windows 8.1 Cyberlink updates.

• Toshiba Satellite CDT4070 power on problem - orange led blinks 8 times...

  I have a problem with my laptop, it's a Toshiba Satellite CDT4070. When I press the button start power
  Tour LED from yellow to orange. Then the LED flashes 8 times. SLSSLLLS = 01001110. Peut
  can you tell me what this error code means?

  Another person wrote "I solved the problem" by connecting the 2 PCBS together. but what is PCB? I do not know.
  I will be grateful for your help.

  Post edited by: krystianic

  Hello

  I guess that the "0100101010" - code must be some kind of error code, but I'm not sure. But even if that's who you wouldn get information on this subject given that these technical information are kept for toshiba technicians, I guess. :)

  So, in this case, you can not do anything and just ask some laptop technician/service station for a checkup of material or a repair.

  Sorry mate, but that's all.

  Good bye

• Pavilion 400-034: short DST check hard disk failed

  I woke up to a computer with a diagnostic system with a hanging rotating circle. I turn it off; It restarted in the same diagnostic system that hung for hours. Fast test system then showed that check Hard Drive DST short: failed. Failure ID: 60D5U2 - 0007 MN-PXPAWJ-60XT03. Does this mean I need a new hard drive? How do you know that one to get and how to replace it? Finally, how can I get a copy of the operating system to load in the new HARD drive? Thank you.

  Hello
  
  Unfortunately to say: most of the time the 24 tank failure id indicates the drive is defective and must be replaced. It is still under warranry? In the affirmative, please call HP for a replacement.
  
  In the United States:
  
  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1
  
  or the HP technical support: 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.
  
  http://welcome.HP.com/country/W1/en/contact_us.html

  You have a set of recovery media? If this isn't the case, you will need to contact HP in your country (above links) to order one.
  
  Kind regards.

• questions of failure/replacement of Time machine

  I have an old time machine that was failing and I'm going to buy a new drive. When I get the new drive:

  1. How do I format it?
  2. is there an advantage to making it be bootable?
  3. If so, how I would be bootable?
  4. is it possible to copy the contents of the current time machine disk to the new disk? The old time machine disk drive is 500 GB, and I don't have 500GB free on my disk system hae. Should I just unplug the old drive and I only connect if I can't find a file? In addition, 500 GB drives no longer seem to be available. The smallest drive available now is 1 TB.
  5. Is it possible that the failures of time machine, I had are with the time machine of tine software, not the drive? I'm under mountain lion. I don't want to update to OSX, because I do not know if all applications will break.
  6. the reason why I asked question 5 is that when the disc goes down, I disable the mac, disconnect/reconnect the time machine, turn on mac. It is possible that the mac start-up is enough, and I don't need to disconnect/reconnect the time machine. Thoughts here?

  Time Machine FAQ

  1 mac OS extended (journaled).

  2 & 3. I don't know the answer to these questions.

  4. try to use disk/restore to copy the backup to a new location. Please note that this will reformat the destination partition.

  5. more than information would be useful. What type of chess?

  Application compatibility

  (2) application compatibility

  Information on the compatibility of 10.11 El Capitan

  6. reboot may be sufficient.

  Troubleshooting you can try.

  Troubleshooting of Time Machine

  Solving the problems of Time Machine

• A USB from a PXI power control, turn the engine in real time

  Hello

  I need a USB of my target in time power control real (PXI) who installed the engine time real Labview (no windows installation).

  If I'm not mistaken, this is not possible with the USB port on the controller (NI PXI-8108) that I have not installed windows to recognize the device.  As far as I could see, it looks like I need to buy a special card for PXI that allows me to interact with USB devices.

  Is there someone who came across such an environment to see if it's the right approach?

  Thank you very much

  Dani

  

  For those who are interested, in order to control the USB equipment, the following requirements is necessary for a Phar Lap ETS RT OS operating system:

  In time real LabVIEW 2011 or higher
  VISA, 5.1 or higher

  http://digital.NI.com/public.nsf/allkb/5F30CD20D4D986CC862576CF00748B15

  http://digital.NI.com/public.nsf/allkb/ED3790E56FE969F8862575C30076063C?OpenDocument

  The upgrade of the system and the second link will allow such equipment.

  

• Power supply hangs after running vi second time

  Hello
  I'm just starting my adventures in worlds of LabView and I encountered a problem with my first serious vi which is control CPX400DP power and oscyloscope DPO4104.

  What my vi should do:

  Firstly, it defines two supply channels current levels (5V on the first, 0V on the second, etc.) and the size of the jump (0, 5V for example). Then vi must change two levels depending on the size of the jump, and repeat until the current levels of the two channels would be opposite to the starting value (in this case, 0V on the first channel, 5V on the second). Also before every current change the vi would save to the file average measurements out of oscyloscope waveforms.

  What does my vi:

  In the first round, it seems he does everything in order (with resonable numbers a new text file is created). However, when I try to run the vi again my power supply freezes short after some changes underway. I can't stop the execution of the vi in LabView (it takes a while though), but to run the vi successfully, once again I have to reset my power (turn it works).

  I tried to work around this problem by modyfing the vi in such a way that he would do what I want several times during the running vi only once, but unfortunately that did not work.

  If someone would have any suggestions on what I am doing wrong or how to help solve this problem do not hesitate to share I don't bite... much , but seriously, I'm stuck with this problem for over a week and I will be happy to advice

  Thank you!

  Waldek.

  PS Sorry if I'm not clear somewhere but I'm not used to talk about programming in English
  PSS as attachments are my main vi and two sub live.

  Revan-Ghost wrote:

  Thanks to a suggestion from Bill, but could you elaborate a little bit on "try to insert; * MUTUAL FUND? After each setup command "? I understand what would make, concept wise, but as a new user, I don't know how to do this in LabView. And good Uncle Google says nothing about '; * MUTUAL FUND? "and insist to talk instead of OPC servers.

  I'm sorry - I looked at the manual and could not realize that the subVIs missing from your code actually were drivers for your diet, so you will not be able to implement this (unless the pilots themselves have the ability to 'Operation Complete' - I hope the drivers provided with the documentation).  Otherwise, you may be stuck having to hardcode waiting after each command.

  If you have written your own drivers, it's how send you the command set output 1 to 1 Volt:

  V1 1; * MUTUAL FUND?

  The V1 1 sets your voltage of 1 Volt.  To turn to another command, use the semicolon.  The * OPC? forces command him back send a '1 '.  As orders are followed in order, food cannot send the '1' until he gets treated the command set to 1 Volt.  When this command is complete, the '1' is sent, you read the 1 out of the buffer and move.  This avoids problems where you stack on too many commands at once.  I checked the manual and it supports this feature.