Power on PS6510 headache

Similar Questions

• How to set up the Intel Graphics = battery / AC Power = nVIDIA GPU?

  Right, so I formatted my laptop and reinstalled all the drivers Lenovo stocks to avoid headaches

  I'm on a High Performance plan for the moment

  What I want to do is... set the plan of the High Performance always use the nVIDIA GPU if I was connected to the power adapter or battery.

  I also want to set the balanced plan to use the GPU nVIDIA while on AC power, but go to the Intel graphics card when I use the battery

  How can I configure it that way?

  Thank you

  Never mind, I just realized I can simply press the button located on the right side of the laptop to switch between graphics chipsets

• HP-S5-1014: s5-1014 green blinking on power supply

  I have a S5-1014 HP that I'm fixing for a friend.  I was told he was "struck by lighting.  I know that the mouse and keyboard no longer works which was connected to the computer.  I tried pluggin a power cord to the power outlet, but the computer does not illuminate.   The light flashes green on the back of the power supply and in the Ethernet port (flashes in unison with the power light).  If I disconnect the connector 24 pins of the power supply to the motherboard, with green go light fixed (with the power always connected), but he will return to the State once the connector 24 pins reconnects.  I tried another power supply to start the computer, but he was not long and narrow like what's in the computer and I have had no success.  Is that going to be a question of power power or a motherboard problem?  As I said, the mouse and the keyboard that was connected to the smoking machine working as well at the same time.  Any help is greatley appreciated.

  OK sorry I'm misunderstanding you. Food must also have a fixed light (no Flash).

  If a good diet known flashes on this mobo also and considering what is the root cause of the problem was, her toast.

  This 250 watt PSU is also cheap and not worth trying to save. A mobo that had a surge go through it, although it may work ok in tests, potentially will give you problems later and the client will just come back to you free of bugs and be upset did not set you right the first time.

  I recommend their (just my personal opinion ) to get a new system and save you headaches.

  As you said, it fried the keyboard and the mouse.

  That's why I mentioned to sell them on the idea of getting a UPS surge protector to plug the computer on the next time.

  Not a power strip, but a real surge protector.

  It will be useful.

• Cable replacement HP Envy 14 spectrum (14-3011tu) power adapter

  Hello Forum,

  I just managed to head out of my cable power supply HP Envy 14 spectrum (14-3011tu).  The power adapter is one of these adapters to travel HP (65W - 574487-001) with interchangeable heads.  I called HP Australia and various providers of HP to see if I can get a replacement interchangeable heads or even a replacement adapter all but nobody has them in stock (although they supply base but not the correct head and no one knows when they'll get extra stock).

  -Does anyone know if there's a cell phone similar HP that uses the same 4.7 mm long head adapter like the HP Envy 14 spectrum (14-3011tu)? I would like to buy one so that I can hack together a new cable interchangeable head then I expect new stock coming OEM.

  PS. I've already ordered some after-sales adapters off eBay to fit the Envy 14 spectrum but they are too thick to fit in a few clams micronos decision-making.  The picture below just in case you encounter the same headache like me.

  http://support.tmg100.com/HPEnvyPlusAM1.jpg

  See you soon!

  Hey grainass,

  This is a hard to find for some reason part any. I have personally confirmed with customers this part number is the correct replacement for the DC cable that connects the power brick to the laptop.

  687530 001

  Click here to access the HP parts store. At the top you will see the Americas tab highlighted. Click the tab of the Asia-Pacific and below choose the Australia. On the next page, in the search by the part number box, type 687530-001, and then press ENTER. Then, you can order it online or call at the number HP parts store.

  Hope this helps! Let me know if you have any questions!

  --------------------------------------------------

  Anyone else looking for a replacement DC 14 - 3xxx spectrum cable can use this part number as well. Simply choose the correct country on the HP parts store link and post your questions.

• Z820 - button Power LED blinks 4 times (red) with beep... bad card (Quadro 4000) graphics?

  Hello

  My Z820 at the office is suddenly having a few hardware malfunction.

  When I turn on my machine, the PSU/system fans don't rev and the Power LED button flashes red with a beep 4 times.

  According to this page of troubleshooting, this indicates a faulty PSU on the new UEFI computers:

  HP desktop - computer does not start and emits a LED or a beep Code

  Section "code beep and LED descriptions.

  Get the exact model of LED as the example of "power failure".

  Then, I got a new power supply replacement. I still have the exact same model LED and beeps...

  So, I have drawn deeper and found that when I removed the Quadro 4000 card graphics and then put on my machine, the power button LED is lit in blue (led code ' computer-S0 (normal operation) "") and all the normal spin fans.

  The Quadro card seems to be the culprit...

  Unfortunately, I have no alternative graphic card laying to verify this around, I'm waiting for a replacement of the graphics card (via HP service) to arrive tomorrow.

  Is it possible that the power LED button code (4 times red with beep...) has nothing to do with a bad power supply and that my Quadro is bad?

  Dries

  Dry... that Z820 has been giving you headaches.

  Many fault codes have not changed since the previous workstatons.  I hit this series of beeps of error in the past, and often doesn't mean that the power supply itself is the cause.  It can be a hardware device to the bottom of the chain causing a power surge to power, triggering his "crowbar circuit: fault protection

  http://en.Wikipedia.org/wiki/crowbar _ (circuit)

  Here are the instructions to deal with this series of beeps of a previous HP xw technical and repair.  Note the number 2 in the troubleshooting instructions... usually you don't have to go down to 3, in my experience.  I think that you have already found the faulty unit:

  Loss of power.
  1. open the access panel and make sure that the power cable is properly
  connected to the system board.
  2. Locate the faulty device by removing all devices and then reinstalling one at a time
  until the workstation fails. Replace the device at the origin of the failure. Continue to add
  devices to make sure that everything works correctly.
  3. check the power supply feature.
  a. turn off the AC power.
  b. remove all cables internal power on the system board.
  c. connect the power supply.
  ● If the power supply fan turns and the BIST LED lights, then the
  power supply is good. Replace the motherboard.
  ● If the power supply fan does not turn or the BIST LED does not
  light up, replace the power supply.

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• [Power Mac G5] Type of liquid cooling system?

  Y at - it anyway how to determine type of LCS just by looking at the case?

  We have old school Power Mac G5 DP 2, 7GHz (early 2005) we use for editing (well, for the last two years, he's right there and no one wants to touch this old piece of...). They will throw him in the year, and since I was take care of him for a while, I thought I'd take home when they do and use it as a backup machine for the data of my and my wife. I would like the max memory, put a few large hard drives (and small SSD, but there seems to be a lot of problems with this) and run the Linux command (more problems).

  But first, I have to clean the machine and look at the State of it. What particularly concerns me is the LCS (DP 2, 7GHz I) - these things have been prone to leaks and what I found there are at least three revisions of the LCS - second of them made by Panasonic seems to be the most reliable. I can't look inside, deeply, because it must be ready to use at least for another 3-4 months, I can do is to open the case and remove the front fan and look outside the heater.

  So this brings me to my question: Y at - it anyway to determine the type of LCS just by looking at the case?

  Thank you...

  Apparently, there were two models more prone to leaks than others, although still very rare. See this http://www.everymac.com/systems/apple/powermac_g5/faq/powermac-g5-liquid-cooling-infos-fuites-issues.html

  The damage inflicted by a system of flight are very serious, and it is almost impossible to hide or completely clean. As soon as you open the side panel on the Power Mac, you will easily be able to tell if this unit experianced a problem.

• Exceptional activities related to power

  After that 5-6 years my MacBook battery needs service, classified as a replacement of the battery, but until I get my new battery... Please help me this is my only machine for everything I do. Recently, I see unusual activity on my MacBook, which associated powers and may be the charger cable, for example today when I connect the charger, the led light with a delay also after a few movements on cable!

  When LED on, after a few minutes, 35% collected on the status, LED changed to green and status of load emissions MacBook: 37% charged battery, then return to the normal load State!

  It is only linked to the battery mode or should I concerned about port and MagSafe charger cable? I have fixed my cable charger broken 7-8 months ago and it has worked very well.

  Thank you

  Kind regards

  Hey there alpha120,

  I understand that you are experiencing some problems with the power of your MacBook. While it looks like a spare battery is a good option for this behavior, you can also try a SMC reset:
  

  Reset the management system (SCM) controller on your Mac - Apple Support

  Thank you for coming to Apple Support communities, let us know if we can be of further assistance.

  See you soon.

• Activate App stuck on waiting and power Mode low does ' t

  Hi all

  I have at least two concurrent problems with my iPhone 6 + iOS 10.0.2 (but started with iOS 9).

  I can't install new application directly from the App Store on the phone because they were stuck in the phase of "pending". Same behavior of update of the applications that are already installed.

  The only way to update/install the app's iTunes download and synchronize.

  The other simultaneous problem is in what regards the activation of "low power mode" with the rocker switch (settings > farm > Low Power). Whenever I try to activate (manual or automatic 20% of battery) function, the gray toggle becoming in the Middle, then return to the OFF position.

  I already have backupped & restored several times, but nothing has changed.

  How can I solve this?

  Thank your

  Best regards

  Hello Axoduss,

  Thanks for posting in the communities of Support from Apple. I see that you have two problems. One is that the low power Mode is not activated, and the other is that updates and new applications are blocked pending. I know that I rely on my iPhone for everything. It is important to ensure that it works as expected. I'll be more than happy to help.

  Great job to the backup of your phone and restore. It's a great way to help solve these issues.

  If you are restoring from a backup, the problem may be in the back upward. I recommend to reset the phone to factory settings and set up like new to see if the Mode low power and installing apps works. If this does not work after the installation in the new and not after the restoration then you want to restore your data manually and not market back. Here is an article on setting up the phone as new:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  Let us know if that helps.

  Take care!

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• Power point

  Is there an outlet, especially for iMac computers or do you have to buy a Microsoft Power Point program which is compatible?

  Yes, there is a PowerPoint for Mac available from Microsoft.

• There's the iPhone battery chargers 5 that use no electricity.  For use in a power failure.

  There's the iPhone battery chargers 5 that use no electricity.  For use during a power failure.

  Your best bet is an accumulator.  I have one I got on Amazon by EC Tech.  It is a brick, but it will charge my iPhone and the iPad, if the current is cut off.  You just need to load the brick and keep it in an emergency.

• Watch OS shows 3 past mode of power with almost total of battery reserve

  Hello world

  I have a problem since I updated my watch to watch OS 3. Watch (series 1) goes into unexpected battery power with an almost total reserve mode. It produces one or two times a day and the only thing that I recognize that the watch remains black when I look at my wrist. It shows only the time in green numbers when I press a button and I need to reboot by pressing the two buttons. After the reboot, the watch displays + 80 or even 90 + % battery life and it works as expected for the rest of the day (if is not the same problem from happening again). Especially my battery is 50 + % at the end of the day.

  Today I reset the watch and recovered from backup, but that changed nothing. The watch went to the mode of power with a range of 78% a few minutes ago

  I am really frustrated because it happens very often and I could not find a solution to this problem. Decommissioning watch OS 2 is not an option...

  Thanks in advance for your help, I am really stuck on this issue.

  Best regards from Germany,

  Matthias

  Hi, Matthias

  If your dial of the Watch includes the complication of the battery, it is possible that accidental screen interactions are causing your issue.

  Tapping on the complication battery indicates the level of battery with a large button to put the watch mode of power reserve.

  You can consider using your watch for a while without this complication on the face of the watch to see if the issue is recurring:

  Change the face of the watch on your Apple Watch - Apple Support

• iPad power Switcj

  On my iPad, the power as well as the blow of unlocking button do not work. How can I solve this problem?

  Take it to Apple for a free estimate, or call them and arrange for express service. It cannot resolve hardware problems yourself. You will need to get a replacement from Apple. Apple does not repair the individual components like that, they replace the whole device with a service unit. If you are in warranty and parts failures were due to a manufacturing defect, it would be free. If out of warranty or if the failures were due to accidental damage or misuse, the elimination of guarantee fees apply.

  iPad repair - official Apple Support

• Power cord for my iMac has crunched, how do I get a new one?

  What I do my power cord for my iMac has been chewed and I don't know if I can claim the title of the guarantee or if I should just buy a new...

  As I can use it only if I put in some way and cannot be pulled.

  If the plug of your end iMac has this form:

  

  Then the power cord to any standard computer work.  It may not be

  White enough with the beautiful fitting molded but it will work.