Power option does not

Similar Questions

• Sleep in the power option does not properly

  At this pc 64-bit of windows 7 during approximately 3 years, all power options worked well. I set it up to show the screensaver after 10 minutes and then turn off the monitors after 20 minutes and then sleep after 30 minutes. Always worked. Eve of the keyboard worked. The pc was taken out of his sleep my moving the mouse, or touch the SPACEBAR on the keyboard. Like I said worked perfectly until I came back from my holiday and there were many updates of windows pending. I installed all of these more updates from Adobe for Photoshop, and now sleep in one of the planes of power options does not work, even if it still works from the keyboard.

  Any ideas before you go back to an image of my C: drive is before I took my holiday and start to do the updates one by one and checking?

  Hello

  You might face this problem because of the incorrect power settings. I suggest to follow the steps given below and then check if it helps.

  Method 1: Troubleshooting to be able to run.

  Click on the link below and run the electrical troubleshooting utility and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2: Create a new diet plan and check.

   

  Follow the steps below and check if this can help, if it works, then follow the steps in the section to delete a plan to remove the old diet plan.

   

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows/change-create-delete-power-plan-scheme#1TC=Windows-7

  Let us know the status of the issue, we will help you.

• Low and critical battery advanced power options does not

  I put the low battery level of my laptop at the level of critical battery from 10% to 5%. I want that my laptop to put into hibernation when it is critical. But he stops just without warning. Even if in power options advanced under "critical battery action", it is set to "hibernate." Why this is happening and what can I do to solve this problem?

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Login as an administrator.

  All the default power plans and then set them as you wish.

  If we don't work as expected then change to something else as if you plan
  leave it like that and then come back back and set it as you wish.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite A100: Toshiba Power Manager does not work

  Hello everyone!
  I just installed Vista on my laptop (originally I had Win xp on it)
  First I installed video drivers from toshiba.com
  Then I installed the bios update and additional package toshiba.
  But the toshiba Power Manager does not work!
  Vista uses only its tools to manage the battery.
  Can you help me?

  Thank you!

  Why do you offer the Power Saver doesn t work properly?
  You are getting error messages or what?

  The Toshiba for Vista energy saver is not the same as for Win XP.
  You can find some additional options in Vista power options!

  There, you can choose between 3 different power option.
  Choose one and click on the link below changes the power options

  The new window should appear and you can click on change advanced power settings link.
  In a new window, you can see the Toshiba Power Saver Settings.

  Good bye

• Satellite A660 - 11 M on Windows 7, Toshiba Power Saver does not work

  I have a Satellite A660 - 11M and I'm working on Windows 7 Ultimate

  The problem is that I download all drivers and updates but the toshiba power saver does not its installed without error and TPSLaunch (green icon) does not open when I click on it and no icon, I found in the control panel for the afterIi program do not install the package any added value!

  Under Win7, it works a little different. TOSHIBA Power saver is part of the advanced settings ower.
  Enter the power management you are using and click on advanced power options. There you should find Toshiba energy savings.

• The current power plan does not

  The current power plan does not

  Hello

  These should help:

  How restor e the default power plans in Vista (and then go back and edit as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Power plans: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

  Change, create, or delete a power plan (scheme)
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme
  Troubleshooting Windows Vista sleep and extended

  Manage Windows Vista eating patterns effectively & efficiently.
  http://www.WinVistaClub.com/G29.html
  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Desktop icons can be seen on the desktop, folders are not able to be open, content is not visible; File save option does not work!

  Recently, I tried to re - install samsung smarthru mfp program (already installed and working except the scan).

  at the end of the reinstall the Office is empty, desktop wallpaper and all records of icons could not be seen, I wasn't able to use windows Explorer.

  I tried restoring the system, but even after that the message that the restore system was not made completely.

  Now the problems are that (1) folders/icons on the desktop are not displayed on the desktop (I have added Office to taskbar and all office files can be accessed from there.

  (2) the big problem is that folder except option does not work: cannot save Web pages, also the documents/files are not able to be saved after having published a new name.

  (3) new folder names the names of the files are not created.

  I tried norton internet security 2010 full scan, there is no virus.

  kindly help

  Thank you

  Norton will be interefe with system restore.

  Read this info for problems with the system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• 41.0.1 - tab utilities Plugin Options does not work - ranks multiple tabs, etc.

  41.0.1, tab utilities Plugin Options does not work, multiple rows of tabs, etc.

  Installed and configured 'Tab Mix Plus' to use instead of "Tab Utilities".

  Solved. Thank you.

• Firefox Autocorrect option does not

  Hello

  I recently changed my laptop. I installed firefox, but the auto fix option does not work...
  It doesn't show red underscore on the misspelled words...

  However, sometimes it works as well, but most of the time this isn't...

  Also, I've always seen this similar problem: https://support.mozilla.org/en-US/questions/1026848?esab=a & s = & r = 0 & as = s

  Is this due to a bug in the installation or what?
  I would appreciate your help and your support.
  Concerning

  Hello

  You can check your language settings in your Subject: preferences page to make sure you have the correct language configuration. Go to the tab content for languages. You can also make sure that you enable spell checking in the Advanced section, under the general tab.

  • (language) Tools (or

    

    ) > Options > content

  • (check spelling) Tools (or

    

    ) > Options > advanced > General > "Check my spelling as I type".

  Also, check your dictionaries to ensure that you have the right installed:

  • Tools (or

    

    ) > Add-ons > dictionaries

  You can always see if spelling is enabled for the correct language by right clicking in an input box. "Check spelling" must be checked and that there should be a submenu of 'Language' which shows the dictionary that is currently selected.

• Home Page layout option does not work. Home page comes down to Modzilla Firefox Start Page.

  Homepage layout option does not work after saving a new or different homepage on Firefox 19.0. When you open a new page (not tab) it always comes back to the default "Modzilla Firefox Start Page" value anything.

  How to fix preferences that will not save help?

• I have firefox 13 and 15 but realplayer download this video option does not work, extensions to save plugin is disabled, if no videos do not play in youtube

  I have Firefox 13 and real player 15, but the download this video option does not work, under extensions to save browser plugin is disabled, but if active videos do not play in youtube, error occurs, it's major drawback, it works well with IE, but I prefer Firefox so any help to rectify the issue is appreciated.

  One possibility is to upgrade to Flash 11.2 and re - activate the Plugin RealPlayer browser Record extension in the Add-ons Manager (Tools > Modules > Extensions) (it's a softblock).

  If you need to return to 11.2 Flash you can download Player Flash 11.2 through this direct link:

  • http://fpdownload.Macromedia.com/pub/flashplayer/Current/Licensing/Win/install_flash_player_11_plugin_32bit.exe

  You must uninstall version 11.3 Flash.

  • http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

• The help file for export bookmarks in Safari told to go to "Organize Favorites", but this option does not appear in my menu

  I want to export Safari bookmarks. The help file explains to pull down the bookmarks menu to 'Organize Favorites', but this option does not appear on my menu drop-down. The help file is out of date?

  Please click the button solved it next to the answer that meets or solved your problem of Firefox support, it appears when you are connected, so this thread is marked as solved to help other users who may have this same problem.

• default e-mail account option does not appear

  I have a mini ipad with ios 9.2.1.  I want to choose gmail as my default e-mail account, but the 'default' option does not appear (as it does on my iphone with the same version of ios).  It must be less than the "signature" option in "Mail, Contacts, calendars" in the settings, but it isn't here.  Any suggestion on how to solve this problem?  Thank you.

  You have multiple e-mail accounts set up on your iPad in settings > Mail, Contacts, calendars, and at least two of them were currently "Messaging" enabled on them? I have several active accounts and I had the setting in iOS 9.2.1 (and now 9.3)

• Satellite A660 - 11 M - Power Saver does not work

  I have a Satellite A660 - 11M and I'm working on Windows 7 Ultimate

  The problem is that I download all drivers and updates but the toshiba power saver does not its installed without error and TPSLaunch (green icon) does not open when I click on it and no icon, I found in the control panel for the afterIi program do not install the package any added value!

  Hey Buddy,

  Wait a minute, please.

  I'm a little confused about your first ad you write energy saver, and then click the green one you mean exactly and what only he m s the problem?

  If you mean Eco mode, you need to install the official website of Toshiba Eco utility.

• Satellite R630-14 days - WLAN turn FN + F8 option does not appear

  I just got my Satellite R630-14 days with OS Win7 in German so I reinstalled the OS is in English (Win7 Ultimate).
  I installed all the drivers supplied by Toshiba (Chipset utility, value added package, WLAN Broadcom Wireless Driver, etc.), although when I press FN + F8 combination only keys to toggle the Bluetooh is available.

  Turn WLAN switch option is not displayed.
  Because of this, I can not disable the WIFI network.
  Why the WLAN switch option does not appear even after installing all the drivers?

  Hello

  What it means that all the FN keys work correctly, but only the Fn + F8 for WLan is not OK?

  Hmm I think it has something to do with the WLan driver. If the WLan driver has not been installed properly, then you will not be able to activate this using FN + F8.

  Check-> network adapters Device Manager and check if the wireless network adapter is listed correctly!