Power Precision T3400 problems

Similar Questions

• Precision T3400 BIOS A11 problem

  I use a precision T3400 with a Core 2 Duo E6550. Windows XP SP3 works well, but I found some problems with the diagnoses that appear to be related to the BIOS A11.

  When I select Diagnostics from the F12 boot menu, the system crashes almost immediately at the beginning of the PSA. Here is the error message:

  TREADMILL test
  Test result: System error
  Error code: 2000-0111
  MSG: CPU 0: Protection General Exception occurred

  When I boot a diagnostic CD (ver. 1322.1) passes most tests, but some of the processor and the system board tests at key upwards. All the tests of multiprocessor cache cause the following error:

  Exception has occurred in the MPCACHE module. File 'IOAPICSP.asm' of MDM. Line 1645!

  For the motherboard, the i/o APIC MP Test causes the following error:

  Exception occurred in the module IOAPIC. File 'IOAPICSP.asm' of MDM. 2918 line!

  I returned from BIOS A11 A09 and all those problems went away.

  Just thought someone might like to know.

  T3400 BIOS A11 BIOS A14

  TREADMILL test
  Test result: System error
  Error code: 2000-0111
  MSG: CPU 0: Protection General Exception occurred

  Latest BIOS A09 has the issue.

  The most recent video card seems to be with cards R7 and Radeon series R9.  Older cards like the Radeon 7770, etc. 5770 supports bios VESA BACK including 103 mode extensions.  NVIDIA cards seem to be good.  EVGA Super clocked GTX 960 works very well.

• Looking for a GPIB syntax for the test on the channel Code to reverse output power precision driver

  Hi all

  I'm working on a module with Labview for a 'Channel of Code to reverse output driver power precision' test.

  Here is the link I received from Agilient:

  http://Wireless.Agilent.com/rfcomms/refdocs/cdma2k/cdma2000_gen_op_overview_meas_wquality.php#BABCHH...

  The criterion should be pretty simple, but I have not any syntax GPIB of the machine when using on this subject.

  It would be graceful as any example of programming could be provided.

  Enjoy,

  + Kunsheng Chen

  Thank you, StevieZ.   The problem has been solved, I does not recognize that the test had already been done before.

• Cannot complete installation of Windows 7 OEM on Precision T3400

  Can someone help me?

  I try to do a clean install on a Dell Precision T3400 with Windows 7 64 Bit OEM, but cannot complete the sequence.

  It goes through the sequence of the whole installation, restart a couple of times. He gets in the beginning of the sequence as "complete installation" - contribute to what, according to me, it's the final reboot - and then crashes. I think that what should come next is the bit where to enter information first name of computer use - time, date, place - time etc. I never get that much, however.

  I have not updated the BIOS. Previously Windows Vista - but the disk has been deleted - not sure if I can update the BIOS in this State.

  Another thing - I swapped the graphics card. The monitor of works well during the initial installation sequence.

  Any suggestions?

  Thanks a lot for reading.

  The suggestion above about SATA drives didn't really solve my problem, but it got me thinking in the right direction.

  Here's what I've learned about this through the answer and the answers on other forums above. It turns out be a common problem:

  It is usually caused by the lack of drivers for devices that are connected to the computer. Devices can include: any type of USB device (may be same mouse or keyboard), any type of hard disk, graphics cards and other types of cards such as PCI or PCIe Firewire. If you have a SCSI card then remove it permanently.

  I had a Dell keyboard with built in USB ports and a Media Player control. I swapped it for a simple vanilla ordinary keyboard.

  I also already swapped the graphics card that came installed on the T3400 for an older NVidia Quadro card as a fix for compatibility with my older monitors SVGA adapter.  When I searched on the NVIDIA site, I discovered that there is no Windows 7 driver for my graphics card, so I bought a DVI - I adapter that I needed the original card and replace.

  My problem turned out to be the graphics card.

  On other forums I have seen people solve the problem by removing the USB devices all THE. If you have a keyboard and a USB mouse, this may seem to be a problem. However, once you have initialized the windows 7 install process you can remove the keyboard and the mouse. Whenever the computer reboots it page and warn that any input device is fixed, but after a short pause, he must continue with the installation procedure. In my case, the fancy USB keyboard was certainly a problem too. Disconnected after initialization of the installation allowed the installation of two additional steps.

  I curse me Microsoft about this problem, but to be honest, I was not able to run a compatibility test of windows 7 on my computer. I bought it on ebay without an operating system. If I could perhaps it would have marked the graphics card problem and composite USB keyboard device.

  Don't know if it will work, but if you can't figure out what your driver problem, you can be able to run a hardware compatibility test and periperhals by a temporary installation of Ubuntu and connect it to the Net. I had no problem to boot Ubuntu from a USB key and the connection to the network.  It works perfectly first time without any of the usual shenanigans of Microsoft. In my opinion, Ubuntu is an operating system much higher with a much nicer user experience. My only reason to stick with Microsoft's older software. It's highly unlikely that I will ever consider buying a new system from Microsoft again. They lose the pedals after XP.

  Good luck

• The upgrade of my Precision T3400

  I put my T3400 to level, and I want to know how long I can take it.

  1. According to Dell, the maximum size of any player is 1 TB or 1.5 TB, according to which tech I ask.  But when I tried a 2 TB drive, the system seemed to have no problem - what is the size of maximum disk I can use?
  2. Dell said that the more RAM that I can use is 16 GB - someone ' one already tried most?
  3. I've been adding readers and cards, i/o and RAM - how do I know when (if ever) I reached the limits of my power 375 watts? (Dell offered also a 525 watts, so I guess that some call configurations for this.)

  I've already changed in XP x 32 for Win 7 Pro x 64.

  Max ram is 16 gigs but its more expensive to buy RAM that it is to get a new DDR3 as a T3500 system, which would also have the 525W power supply.  Same 8 GB of DDR2 memory is over priced now that they are scalping.

  2 TB is max without a host Bus Adapter.

  BIOS A09 is fine, but later versions have problems with PSA Diagnostics. BIOS earlier than A08 won't support 16 concerts.

  http://www.Walmart.com/IP/off-lease-refurbished-precision-workstation-T3500-2.8GHz-XQC-8gb-160GB-DVD-win-7-Pro-Tower-computer/41053665

• Precision T3400 follies

  I was the proud owner of a T3400 precision until last week.  The power supply died and I decided to replace the old with a nearly identical refurb.  The configurations are very similar, I thought I could hover over the data with little effort and continue to use the T3400 as my machine backup air gap.

  I have a strange problem that I can't seem to nail.  The original T3400 was related to my U3011 monitor for about 2 years with no problems.  When I received the replacement machine today, I can't do the replacement T3400 work with this monitor.  When I connect the video output, as soon as I put in the power cable, the status light power turns yellow, fans go to full speed and the computer will not start.  Connected to a cheap 19 "monitor phillips, the power indicator turns green and the computer will start and display the video.  I duplicated it with two different graphics cards, the original NVS290 and a PNY FX380LP.  The two cards will have a video output DVI on the Phillips, but the two cards show same yellow power state light behavior when it is connected to the U3011 monitor. from DVI, enter the U3011 works very well with my T3600 and two DVI displays correctly.  However, try this new T3400 with DVI input or video card gives the same result except once I had to remove the fleas memory due to a fault of beep which eliminated after that I reinstalled the chips and to monitor Phillips.

  What baffles me, is the length of time, I used the original T3400 with still video equipment and have had no problems and now this situation seems to be the new normal.

  Anyone has an idea here, I'm stumped.

  Thanks for the 2 replies, but I solved the problem.

  Question # 1 was the Orange light of death on my original T3400.  I replaced the original power supply with an OEM of Corsair, which was recommended elsewhere on the card and the computer started with the original re-installed equipment.

  When I connect the computer to the U3011 monitor, light is orange again.  I removed the power cord quickly and replaced the DVI - D cable with a DVI-S spare part and the computer started normally.

  My opinion is that there is a short circuit in the DVI - D cable, released original 375W PSU. According to a chart of food food recommendation I should run a minimum 450W while he was probably in his last breath.

  The other issue was the refurb T3400 replacement that I bought and then delivered to a member of the family.  The BIOS in the refurb was A08 and once I had updated this BIOS to A13 was able to use the U3011.  The A08 BIOS only seemed to work with a 19 inch LCD.

  After all that fuss I'm just glad that my T3400, it's back to normal operation.  I have always been pleased with the performance of the device and it was solid for almost 5 years now running 24/7.

• Power DP500 G4 problems

  Does a couple of months. Randomly, one day after several weeks, I hit the power button and it was fine. Used 4 - 5 times a few weeks since then. Evening, after about 3-4 minutes he closed as if the power supply cord had been pulled. It will not feed into. I used a browser when it happened. I know that the AC cord is on, I can hear the power click when contacts connect with the machine. Battery PRAM (?) bed 3.7V with a meter. I took it off for 10 minutes for a reboot without result. I don't see any LEDS lit on the motherboard, even if I don't remember having ever seen one, but I read that maybe there a. (A few years ago, I replaced the power supply once the Tower lights up after a power failure in the area due to lightning. We seem to have several failures each year in this area. Just for background information, do not know if there is no relationship to the current problem. )

  Hello

  The battery check was made with a resistance of 1 K series?

  Was the cord power & all devices disconnected when you have removed the battery for 10 min.?

• Power on the problem to my SP2100

  I have a Satellite Pro 2100. I can't turn on when I press the button on the computer. It's the same that played in the large battery or AC via the adapter. The only sign of the computer is the power light is flashing orange (one of five in the front). I can't stop him this. Sounds pretty terminal for me, any ideas?

  Hello

  A flashing of the LED DC-IN (as I understand it to be from your description) is never good! Take a moment to think about if you have recently installed any device (drive HARD, CD, DVD, Memory expansion/PC Card...).
  If so remove it and try again.
  If that is not enough then I think it's time for the service. A DC - IN flashing normally means that there is some kind of electrical problem in the machine.

  Good luck!

  Tom

• Power supply plug problems - Satellite A60

  Ive got a satellite A60-155 and its just out of warranty, but isn't there always the way I pulled the plug on the back of my laptop and the center of the pin of the plug on the laptop came out with it.
  for something that should be quiet robust is not, how many people have had this problem?

  I would be interested to know before I phone services to customers in the coming days as its only 12 months and 26 days and Yes have had warranty extended, but these things should not break up

  Hi Kenny,

  I have also experienced the center pin breaking on the my SA30 power outlet. As you rightly say, they are not particularly robust and can easily be damaged by something to catch the cable when it is plugged.

  The bad news is that the normal remedy is to replace the card mother:(sauf si vous pouvez trouver un réparateur prêt à souder sur une nouvelle prise de courant.)

  Oops!

• Power PC speed problem

  Hello, Laurie here. help my friend, Amy, with her computer. A few moments ago I noticed this suspicious 'PC power speed' icon to the search. You follow me? I assume that you are familiar with this one right? OK, so meet the standard as the first step on how to manually uninstall this thing all begin with the Manager tasks and ending the process, right? This is where the problem is, the ctrl alt del function will not bring the upward Task Manager, (probably all part of Funpack of Virus PC power speed!) (Im kidding!) In any case, I think that the key elements to get rid of the "power of PC system" are in the registry anyway, but I am not sure. Any Suggestions? Please, I beg you.

  Hello

  I recommend restarting the system in safe mode and see if you can remove it from there. You should be able to go in Control Panel to add/remove programs and remove it.

  I would also like to run Super anti-spyware, you can download it from the link below.

  http://www.SUPERAntiSpyware.com/

  Just download one and do a full scan.

  I hope this helps.

  Jim

• HP 250 G3: Administrator and power on password problem

  My laptop a HP 250 G3 has the following problem. When starting up you must enter an administrator or a power on password. I can not connect. After three times trying, he gives a stop ystem. With the following nunmber77413477.

  How can I work around this problem?

  Can someone help me.

  Thank you

  André

  Try to enter

  68571479

• Dell Precision T3600 problem with feedback headphones

  Hi all

  I recently acquired a new Dell Precision T3600 (in January 2013). However, I got a problem with your comments when I insert earphones into the headphone jack on the front of the office. The noise can be described as a sizzling/humming noise that is loud to the point that it is too distracting to listen to the audio through it. You can hear in the headphones, however, comments are always present and distracting. I also used several different headphones to exclude that, as the problem.

  I'd love to hear from others if it is a common problem with this system. I've read elsewhere that it could be a problem with the graphics card from NVIDIA, but I'm not sure.

  Kind regards

  Shaun.

  Some components of the system:

  -Intel Xeon CPU E5-1603

  -OS Windows 7

  -Graphics NVIDIA NVS 300

  This should answer your question.

  http://en.community.Dell.com/support-forums/desktop/f/3513/t/19466580.aspx

  I just got a T3600 and will contact them to get the front i/o Panel replaced.

• Dell Precision 5400 - Problema aggiornamento firmware RAID LSI Logic for Dell SAS 6 iR controller

  Assistenza Tecnica Dell company,

  only recently ho avuto disco SAS Seagate Cheetah 15 K, pertanto it SAS controller mi segnalava che degradazione of the proclamation of the United Nations of the UN problema del Volume sul quale era misconfigured it suddetto disco.

  Ho labor-intensive UN uguale disco, stessa marca e modello e versione firmware (S527) di quello nel present RAID 1, recoupling the configurazione del nuovo volume non e consentita, perched there controller individua it firmware del nuovo disco como S52A instead S527, come scritto anche nella targhetta present sul disco stesso.

  Conseguentemente, pensando che if trattasse di one problema al legato firmware led controller (SAS 1068E FW 0.20.48 - IR) sono stato web sulla pagina Dell, del supporto relativo al oggetto Office (serial number: ), ho aggiornamento di downloaded it pilot, my film camera durante he message:

  SASDupie.exe-> ' Impossibile find it punto di ingresso RegDeleteKeyExA della procedure nella libreria di special dinamico ADVAPI32.dll.

  A seguito di this error the TR sommergibili interrupted e quindó non e possibile procedere con controller aggiornamento del firmware del.

  In attesa di una risposta in merito, Corinne occasione per porgere Web saluti.

  Antonio Morrocchesi

  Buongiorno,

  questo forum e exclusively by server and sistemi per ricevere assistenza by it is reported (Precision Workstation) is University 02 57782690 lo.

  Speaking saluti

  Manual

• Pavillion dv6: Admin password or power on password problems

  (1) HP Pavilion
  (2) Windows 7
  (3) enter the password Admin or power on password
  
  Disable the system 85098761

  Hello

  Enter 30990367

  Kind regards

  DP - K

• Power 220CS satellite problems

  Hi, is it possible to order for the Satellite 220 plugs

  Hello
  the best way is to get a Toshiba dealer who try to order the new AC adapter

  The reference is "PA2450U. Its a DC 15 volts and 3.0 amps power.

  Good bye