power switch flashes by intermittent but pavilion m1270 desktop don't dΘmarre

Similar Questions

• Power switch module

  The power switch of my old HP Pavilion a320n PC motherboard has failed.  Someone at - it a source for a new power switch module?

  Thank you... Stony

  Hello

  The SPST momentary switch would have been my first choice.

  If I keep the power switch on my depressed e9280t he powered stops after three seconds.

• 2000-2D02TU HP: HP 2000-2D02TU Power LED power switch but the laptop does not start.

  Someone help me.

  HP 2000-2D02TU Power LED power switch but the laptop does not start.

  What I'm doing.

  Please help me

  Model No. - HP 2000-2D02TU

  Hello @Alok_Bhai,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the laptop won't start does not and wanted to help you!

  You indicate that the lights are flashing, but the laptop does not start?  If this is the case, try to review the following document and let me know how it goes:

  Computer does not start and emits a LED or beep Code

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP dv7-3085dx power light flashes, but the laptop does not work.

  Hello! I have a HP Pavilion dv7-3085dx. It has a hard drive Bay 2.

  Recently, I bought the caddy + cable kit and an Intel SSD. The thing is, when I plug the sata cable to the motherboard for the laptop, and the SSD to it, the laptop does not light. When I press the power button, it flashes once (the power LED flashes once), but the laptop does not light. When I press again, nothing happens.

  I tried to remove the power supply plug, battery and plug it all again, but the power light flashes once (when you press the power button) and no reaction.

  Maybe it's the sata cable: when I remove the new cable and connect the SSD with the sata cable on the 1 hard drive Bay (the cable supplied with the notebook), it works fine. The laptop starts. And when I connect the former sata cable, with the SSD on the second hard drive Bay, it also works.

  I just want to now what is the flashing light means light? Why it does not work with the new cable?

  Thanks in advance! Sorry for my bad English...

  Emilio.

  It is possible that this is a problem with the kit. I would recommend to download and install the latest BIOS update for your laptop, using the download at the following link: http://goo.gl/rbHkg

  If it still doesn't work after that, I would recommend to suppress the kit for a replacement or to try another.

• Pavilion a6512p power switch wiring / card mother pinset

  Looking for a diagram or pinset for Pavilion a6512p desktop pc.

  A friends PC is DEAD.  Then as he would not pass a person removed the power switch and the switch wiring.

  I try to find why the PC is DEAD.  Good power - LED to a constant.

  Need to go beyond the power switch isssue so need to know how to wire lift PC to power.

  So I can determine if it is the switch power supply or component...

  Any help would be appreciated.

  Should be a diagram somewhere telling me what PIN does what.

  TIA, Gary

  Please use the following scheme;

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Pavilion a1130n block of POWER LED flashes when it is connected to the mobo

  We had a power outage and now PC won't start at all and power and power supply lights both blink.  I went through the list of power supply.  When everything is unplugged PSU led remains lit.  When I plug in the mobo light starts flashing again.

  On another forum, someone suggested clearing CMOS as check/solution possible, but I've seen suggested once on all of the controls/solutions out there.

  Should I try clearing CMOS or who would really do something to help here?

  Also, I am trying to determine the most cost-effective path of repair/replacement.  The main consideration for me is software and data on the hard drive, I would really like.  I know that the machine is old so I'm thinking the mobo may need to be upgraded in any case of 6 years and the PSU, should probably due to his age and the likelihood it will fail before too long.

  Any guidance is appreciated.

  lardfw wrote: I deleted CMOS (using the pull method) and there is no change. Well, I understand that it was a long shot. I followed the checklist (do not skip steps).  I was a little fuzzy on the checklist is should I go ahead and take memory cards and disconnect the headset, microphone, usb ports, etc to the MoBo? During the only thing connected to the PSU is the MoBo.  Nothing connected to the PSU = green fixed.  Connected to the power supply flashing green = MoBo. So my concern is passed: the hell of the MoBo or PSU is (because I'm buddy up to the idea that it is).  in order to use the hard drive in a new configuration (specifically the software and data on the hard drive).

  Hello lardfw, with nothing connected to the motherboard and you try to start the system, if the motherboard was not defective, with the power supply work as it should, you get all kinds of sound signals, especially when the memory is removed.

  I'm sure that the motherboard has failed. You should be able to remove the hard drive and install it into another system such as a secondary drive and not the bootable disc and be able to copy some files from the hard drive. You would not be able to access the applications.

  Once you have recovered all the data you may be, you could then reformat the hard drive and use the total capacity of the disk as a backup, or even use it as a bootable stick with a new operating system installation.

• TECRA 9100 - power light flashes and won't start system

  my laptop does not start - all I get when I push the power on button is the power LED flashes on the following sequence. S-S-S-S-L-L-L-S (S = SHORT, L = LONG)
  ANYONE KNOW WHAT THIS CODE MEANS.

  The only thing I could have done was to put a (b8 that is 12mm) screw in the network card lock switch slot on the bottom of the laptop that says MAX 4 mm.
  Any information would be appreciated to [email protected]

  Hello

  This is unfortunately no public document on the explanation of these hexadecimal codes and I can't tell you what that means exactly. The fact is that electronic power supply has detects some malfunctions and sends the code.

  Sorry, but I don't believe that you can do something alone. Try it please contact the customer Service of your country partner and explain the situation.

• LifeDrive power switch broken switch

  Help.  My Lifedrive is 4 years old and has worked well for the old technology.  However, the power switch broke.  In other words, it slips easily rather than move the on/off switch and does not have the power or not.  The last position has been LOCKED.  So I can't enter the data.  A soft reset brings to the top of the screen, but the screen has half shaded numbers and does not recongize being touched or tapped.  There seems to be nothing that works.  A hard reset is not possible because the on/off switch does not work.  Most of my data is synced with my computer.  But I did an interview with oral history and voice Memos do not sync for palm desktop.  So my questions are: 1) does anyone know how to activate a locked Lifedrive with a broken switch for power on / off?  (2) someone knows how to retrieve voice memos to a unit in this condition? (3) does anyone know how to fix a switch broke on a palmOne Lifedrive?  Really hope someone can help.

  

  This is what it looks like after removing the plastic shell.  The piezoelectric speaker is attached to the plastic shell.

  

  Disconnect the battery from the motherboard.  I use a small Flathead screwdriver to separate the connectors softly.

  

  Remove the battery disconnected.

  Write it now, numbers 1 to 4 on the pieces of blue plastic that supports the microdrive; in this way, you won't get lost as all back you together.

  

  The microdrive is connected to the interface of CF. There is a sticker of warning placed on the lower part of the microdrive and interface see cut carefully through the sticker between the CF card and the microdrive with the tip of the knife.  Gently, remove the microdrive from the CF interface with a flat head screw metal or equivalent.

  
  Now the microdrive (in my case, a memory of 32 GB compact flash) is half disconnected from the interface CF.  Continue, making sure not to damage the delicate pins.

  

  Congratulations!  Completely unplugged.

  

  Remove the microdrive (or CF memory).

  

  Disconnect the cable of the microphone of the motherboard in the same way you did to speaker wires.

  

  Unplug the connector for cable film gently with a plastic or equivalent flat head screw.

  You don't want to have cables delicate film cut by accident, so be careful.

  

  Unplug the connector for a another movie cable gently with a plastic or equivalent flat head screw.

  

  Remove the two very short torx screws.

  

  Finally, the motherboard is thrown, and you can see what happened to the switch.

  

  The central internal switch at the top of the motherboard has proved to be in the locked position.

  

  One of the two legs of the plastic piece was found to be broken.  The other leg looked ok.

  

  I slipped inside switch to the unlocked position manually.

  

  Another picture of the internal switch.  If the internal switch turns out to be broken, refer to

  http://1src.com/forums/printthread.php?t=121887 and order a new switch from Mouser Electronics, www.mouser.com
  Part number: 688-SSSS7A0101
  Manufacturer part number: SSSS7A0101
  DESC: SP3T W / BACK WINDOWS
  Switches slide ALPS SMD
  RoHS: compatible

  I think that your internal switch is not broken.

  

  Put the motherboard back such as the plastic piece can slide the internal switch to turn on or off position.  Be careful not to break the other leg healthy in this process!

  Put everything back together carefully.  You start your Lifedrive, you will notice that the date and time are the default, put it so well.   Good luck to you!

• M7470n power button flashing

  This PC has worked flawlessly for some time without problem.  I have installed a licensed version of Windows 7 from MS Technet and everything seemed to be good.  Actively during the use of the PC, it went completely dark.  The power button started alternating blue and yellow flashing. The LED on the back of the PSU is lit.

  I found that if I unplugged the power cord & then pressed & held the power button for 5-10 seconds, it would stop flashing.  When I reconnect the power cord, it starts again normally, but the PC turns off again everything using it as before.  The CPU & case as expected fans function when the PC is running.

  Is finally - the power LED flashes (not the one on the power supply to the back of the PC) as described above an indication of sleep / standby or something else?  I remember that when the PC is on and used, this would indicate blue - and when, in a form of Eve, there amber glow.  I can't find a definitive answer about the State of amber blue alternating.

  I had the same problem. When you press the power button, the blue power led for half a second and started to blink orange/blue. The only way to reset this behavior was to remove the power cord for one minute. The problem started intermittently and as time passed, it was worse. Until today where I have never been able to start. I finally found the problem. It was a power supply problem. I opened the power supply to find 5 capacitors were bulging. I'd say it's probably normal because this PC was purshased in verse 2005 (8 years). I replaced 5 capacitors (total $ 5) and it works like new. Hope this helps other people with the same problem.

• Windows XP Home Edition on HP Pavilion a708n desktop computer stops during power on, reads disc once then powers

  Hewlett-Packard Pavilion a708n with Windows XP Home Edition operating system.  I press the power on switch, HP light lights, then a flash of light yellow for the access to the disk, and then off as if I had pressed the on-off switch.  No display on screen.  Power switch is turned off unless I unplug the power supply cord until the green light on the back of the unit turns off.  If I reconnect the power cord, the computer starts as if I had pressed the button / stop playing a disc made, then turns off.  Only change I made before, was that I plugged the power cord directly to wall outlet instead of a surge protector. Maybe a power surge corrupted a file?  The computer is running daily since 2003 without incident, then, of course, that I don't remember what I did with my Wincows XP Recovery disk.  Is it possible that I can make a recovery CD, or do I have to take my computer in a store?

  Hi windbill,

  It seems that there is a power supply for the computer problem.

  I suggest that you wake the computer to the local computer store and check if all cables are connected properly and the computer power supply is correct.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Re: Satellite A105 - seeing of power started flashing orange/battery not charging

  I have a satellite A105-4054, which gave excellent service. Yesterday, the orange started power light flashing and ceased to charge the battery. I had a second freshly charged battery, that I used instead and the power led still flashes in orange.

  I checked the Original Toshiba charger that came with the device, with a voltmeter and it shows 15 volts, which is correct. The laptop starts normally with a freshly charged battery, but it does not load when it is plugged and the power light flashes orange constantly. If I remove the battery and leave the laptop plugged in, continually amber power light flashes and nothing happens (no voltage). I'd be happy to run just the laptop on AC, but it is not possible now

  The toshiba power utility system icon, when the laptop is started on the new battery, flushing back and forth between the load and the battery, and the battery does not seem to charge. Previously, the power utility would show current alternative continuously when the unit is connected and the power light stay blue.

  I love the laptop, because he rendered services superb and would like to keep. All reasonable solutions, please?

  Thanks guys (and girls)!

  On this virtual path, no one can say with certainty what the problem, but after reading your detailed ad, I think there is problem with electronic power supply on the motherboard. Technicians with tools only special diagnostic can say with certainty what the problem is here.

  In my opinion there is not a lot you can do about it, and in this case, entire motherboard must be exchanged. If you want to contact the nearest authorized maintainer, explain the situation and I hope that they can tell you more.

• Portege R100 stoped working - the power LED flashes error codes

  I have a R100 that has suddenly stopped working.
  The power led (clear amber with the image of the power wire) flashes what appears to be an error code of 5 flashes with a long pause on the last flash, followed by 3 flashes.

  That - what it means, and where can I get a list of all codes error?

  I changed the main battery, changed the spare battery and changed supply - and again, I get the error permanently. I was not able to power the laptop at all since it started. When you press the power button / nothing happens.

  I hope someone on this forum has some information that may help you diagnose this problem. Tech support representatives Toshiba post here?

  Thanks in advance.

  Hello

  I m not a R100 owner but to me it looks like a card mother malfunction because you have already tried to exchange the battery and the AC adapter.

  In this case, the best solution would be if you go to an authorized service provider. Technicians can consult the specifications and they know what means this code I think.
  Here it s only a user to user forum and I have never seen anyone from Toshiba again.

  Anyway, here you can search for the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!

• Satellite 2805-S201: AC power light flashes orange 8 times

  Hello

  I worked on a Satellite 2805-S201 and everything was fine until I put a PCMCIA wireless with 3, 3V power.
  After that, the AC power light flashes orange 8 times and recycle.

  It comes with power supply, battery, AC and no battery installed, etc. If I pull out the power plug and the battery and then put both when AC is green and the battery may charge. As soon as I push the power button, I hear a light click on the right side of the device and then it goes into the amber cycling power.

  Bulletins of support mentioned that the card could get damaged, but did not mention the unit itself.
  No, the PCMCIA card is not always connected

  Any thoughts?

  CA

  Hello

  The flashing provides a micro code which refers to the hardware failure.
  But please don't ask me what might mean this code because in my opinion, only an authorized service provider can be read and can check in his manuals and documentations.
  But it is of course, in most cases, it s a hardware problem of motherboard! ;(

  Perhaps the external PCMCIA card was not totally compatible and damages of something on the map but it's only my personal suggestion to ensure what s bad hardware fault diagnosis would be necessary.

• Portege M750 starts no-power light flashes

  I have an orange flash on my power light error code (1 long flash 3 short 1 long 2 short 1 long 1 short)...

  I have to take the power connector on battery and start battery to operate...

  I use image windows 7 Toshiba with all Microsoft updates (now I NEED many to verying reasons so don't grill me again... for example DON 'T SUPPORT MICROSOFT UPDATES blah blah blah)

  What does this code mean and y at - it a Bios Beta above version 3 for these things...

  Any helpful comments would be greatly appreciated...

  Hello

  In short, 0, long ways 1.
  In your case, the binary code is 1000 1001
  Now, we must reverse the binary code because the most significant bit.
  This means that the code is; 1001 0001
  The HEXADECIMAL code means; 91 h

  Error code is 91 h but I n t know what that 91 h means and what role might be affected exactly!

  Eventually it s something wrong with electronic power supply on the motherboard, but only the ASP technician could provide more details
  However, in most cases, the motherboard is affected and needs to be replaced.

  Welcome them

• Qosmio F20 won't start - power light flashes orange

  My Qosmio F20-149 crashed yesterday and I was not able to get it working again. When I try to turn it on, the power light flashes on and outside (on: 1 sec, off: 1 sec) and the cooler fan operates at full power. When I press a key, there is a genre or a sound error. otherwise no reaction of the laptop; even the CD player does not open.

  I did no RAM-implementation to date, and I use the original power supply Toshiba. I tried from the laptop using only the battery, only power and on both. No change in the reaction. I tried all possible combinations (with a free one, both... etc) of my two cards, RAM (512 + 512) and still no use.

  I am really puzzled.

  If I understand you just your laptop sends a blink code. Copy the following code appears so laptop has detected a problem with the electronic power supply.
  In this case, there is nothing that you can do and the laptop must be sent to the service provider allowed the closest.

  They have manuals containing instructions and the exact description of the code how do I solve this problem.
  Sorry, buddy, but I do not think that anyone here can offer an accurate diagnosis for that matter.