LifeDrive power switch broken switch

Help.  My Lifedrive is 4 years old and has worked well for the old technology.  However, the power switch broke.  In other words, it slips easily rather than move the on/off switch and does not have the power or not.  The last position has been LOCKED.  So I can't enter the data.  A soft reset brings to the top of the screen, but the screen has half shaded numbers and does not recongize being touched or tapped.  There seems to be nothing that works.  A hard reset is not possible because the on/off switch does not work.  Most of my data is synced with my computer.  But I did an interview with oral history and voice Memos do not sync for palm desktop.  So my questions are: 1) does anyone know how to activate a locked Lifedrive with a broken switch for power on / off?  (2) someone knows how to retrieve voice memos to a unit in this condition? (3) does anyone know how to fix a switch broke on a palmOne Lifedrive?  Really hope someone can help.

This is what it looks like after removing the plastic shell.  The piezoelectric speaker is attached to the plastic shell.

Disconnect the battery from the motherboard.  I use a small Flathead screwdriver to separate the connectors softly.

Remove the battery disconnected.

Write it now, numbers 1 to 4 on the pieces of blue plastic that supports the microdrive; in this way, you won't get lost as all back you together.

The microdrive is connected to the interface of CF. There is a sticker of warning placed on the lower part of the microdrive and interface see cut carefully through the sticker between the CF card and the microdrive with the tip of the knife.  Gently, remove the microdrive from the CF interface with a flat head screw metal or equivalent.


Now the microdrive (in my case, a memory of 32 GB compact flash) is half disconnected from the interface CF.  Continue, making sure not to damage the delicate pins.

Congratulations!  Completely unplugged.

Remove the microdrive (or CF memory).

Disconnect the cable of the microphone of the motherboard in the same way you did to speaker wires.

Unplug the connector for cable film gently with a plastic or equivalent flat head screw.

You don't want to have cables delicate film cut by accident, so be careful.

Unplug the connector for a another movie cable gently with a plastic or equivalent flat head screw.

Remove the two very short torx screws.

Finally, the motherboard is thrown, and you can see what happened to the switch.

The central internal switch at the top of the motherboard has proved to be in the locked position.

One of the two legs of the plastic piece was found to be broken.  The other leg looked ok.

I slipped inside switch to the unlocked position manually.

Another picture of the internal switch.  If the internal switch turns out to be broken, refer to

http://1src.com/forums/printthread.php?t=121887 and order a new switch from Mouser Electronics, www.mouser.com
Part number: 688-SSSS7A0101
Manufacturer part number: SSSS7A0101
DESC: SP3T W / BACK WINDOWS
Switches slide ALPS SMD
RoHS: compatible

I think that your internal switch is not broken.

Put the motherboard back such as the plastic piece can slide the internal switch to turn on or off position.  Be careful not to break the other leg healthy in this process!

Put everything back together carefully.  You start your Lifedrive, you will notice that the date and time are the default, put it so well.   Good luck to you!

Tags: HP Tablets

Similar Questions

  • Satellite A100-033 - where to get the cable/connector for power switch?

    Hello

    I change the cable/connector for * power switch button * which connect to motherborad. If anyone no where I can get in? I tried at PC world, but they do not have cable, I am looking.

    My laptop SPAC:

    Satellite A100-033 part number: PSAANE-03J02GEN

    Thank you

    Hi rjbuz,

    I can t tell you the part number because I m not the owner of the Satellite A100, but a service provider authorized in your country can do this:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Just give them a call and ask. Maybe they can send you the replacement part. :)

  • Gigaframe L80 forget automatic power switch time and brightness settings

    Hello world

    I'm on my second gigaframe l80 and it has just developed the same problem that the first seems default back to factory settings.
    Then he forgets his automatic power switch time and very annoying brightness adjustment!

    Has anyone else had this problem?

    a soon fly

    Hello oozie.

    I also own a Gigaframe L80 and it works very well.
    Have you plugged the permanentely power framework (using the AC adapter)?
    How long does it take, the framework sets the default settings?
    Have you tried "reset" of the image using the small button on the bottom of the frame?

    welcome them

  • Compaq Presario SR1522X HELP power switch!

    Help! For the life of me, I can't understand the switch on the front panel. How the hell does it work? My switch will not turn on the computer. I took the front panel off, and I'm completely baffled works even in the switch. Any help would be appreciated.

    Thank you

    Fred

    Hello @Fred_W,

    I understand that your switch does not work and you need assistance. I provide you with a guide on how to make sure it is plugged properly below:

    Step 1. What is the power switch.

    The power on / off switch and the hard disk activity and turn on the LEDs are contained in a single module.

    Step 2. Where is the switch?

    The module is mounted behind the wall front of the chassis.

    Step 3. How is the power switch set to the chassis?

    3 hooks on the module to fix to the wall of the chassis.

    Step 4. When the power switch is connected to the motherboard?

    I hope that this information helps to answer your question. Given the age of the computer HP is no longer wearing the power switch so if it needs to be replaced, you will need to find a 3rd party distributor. An online search, or possibly a local computer technician must be able to locate the part for your.

    Thanks for posting on the HP Forums. Have a wonderful day!

  • problem with power switch only works a 'cold' start after pushing several times.

    Original title: power switch problem

    The power switch on my computer doesn't work as a 'cold' start after pushing several times.
    Could I have accidentally re-set one "true or false? spend in the registry while trying to solve another problem?
    Dave

    Hello

    Looks like that the power switch has developed a problem, probably about to fail.

    Whatever settings are they should be consistent and not need to several tests.

    Check with a real computer store (the one that makes its own internal and no service
    leeks and glances at a Best Buy or other stores) or system manufacturer support
    (for systems custom Integrator system and the manufacturer in the case of construction of House).

    I hope this helps and happy holidays!

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • 2000-2D02TU HP: HP 2000-2D02TU Power LED power switch but the laptop does not start.

    Someone help me.

    HP 2000-2D02TU Power LED power switch but the laptop does not start.

    What I'm doing.

    Please help me

    Model No. - HP 2000-2D02TU

    Hello @Alok_Bhai,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I read your post on the laptop won't start does not and wanted to help you!

    You indicate that the lights are flashing, but the laptop does not start?  If this is the case, try to review the following document and let me know how it goes:

    Computer does not start and emits a LED or beep Code

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • Pavilion a6512p power switch wiring / card mother pinset

    Looking for a diagram or pinset for Pavilion a6512p desktop pc.

    A friends PC is DEAD.  Then as he would not pass a person removed the power switch and the switch wiring.

    I try to find why the PC is DEAD.  Good power - LED to a constant.

    Need to go beyond the power switch isssue so need to know how to wire lift PC to power.

    So I can determine if it is the switch power supply or component...

    Any help would be appreciated.

    Should be a diagram somewhere telling me what PIN does what.

    TIA, Gary

    Please use the following scheme;

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • The A3-A20-K1AY support automatic power switch with flip covers?

    I just bought this Iconia and a folding cover to go with it. I can't find anywhere in the settings to activate automatic power switch. Now, I wonder if this tablet has even this feature.

    Yes, he does not sleep automatically when you close the lid. Better to use the button for this.

  • dv6-3160us failing power switch

    Power switch switch unreliable, how to order a replacement and installation is the best solution.  Features of the laptop are always superb, only the power switch begins to fail.  Thank you

    It is the part:

    4) power button (includes cable) 603682-001

    Here is the Service Manual:

    Your manual

    Part on eBay:

    http://www.eBay.com/ITM/603682-001-DA0LX6PB4D0-new-genuine-HP-power-button-Board-W-cable-DV6-3000-/271288625027?PT=LH_DefaultDomain_0&hash=item3f2a0fe783

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Bug to stop random, DIFFERENT from the power switch question

    I found a problem that I have yet to isolate the cause of the, but his is happened a few times now.  Sometimes, when my Sansa has updated its database and has not played a song at the moment, if I change the settings and then try to play a song, it starts to play, then cut completely.  It doesn't happen often, but these are the circumstances each time.  The player will not respond and will refuse to power on.  The only way to get on is to hold the power switch until the device resets, release, and then power it turned on, which of course means another data refresh.  Once this is done, my settings are all back to where they were before the last change, I can change their return, and everything works fine.  As I said, the problem don't occur often, only about 3 times since I've had (since June), but its still an obvious problem.  If someone wants to know more about it, or want me to try a few things, let me know.  I'm mainly just let Sandisk people know, then maybe we can get this in a future firmware update.

    New firmware is in the release process now, so hang on until release us the next version.  It can help about this.  Should be within 1-2 weeks.

  • Power switch module

    The power switch of my old HP Pavilion a320n PC motherboard has failed.  Someone at - it a source for a new power switch module?

    Thank you... Stony

    Hello

    The SPST momentary switch would have been my first choice.

    If I keep the power switch on my depressed e9280t he powered stops after three seconds.

  • power switch flashes by intermittent but pavilion m1270 desktop don't dΘmarre

    Hello everyone

    yesterday, I met the same problem, I had 2 years ago. The power of my office pavilion m1270 switch started flashing intermittently, but each start attempt failed. I had this problem also 2 years ago, then I opened the computer and cleaned. He was then apparently resolved, but only if I disconnect the electricity Office, IE I could turn off the sessions but it was preferable to not draw power (cable) in the case of going on holiday for example. If that happened, so I had to start pushing the power switch of the dozens of times until I got lucky and he started upward. But since yesterday it turn on at all. With the power cable plugged the switch blinks intermittently and pushing you hear 'click', but no start-up. Of course I opened and cleaned but no result

    . . Maybe someone encountered the same problem and found a solution, know that I am not at all technical.

    Kind regards

    Bart Soepenberg

    Zaandam

    the Netherlands

    Problem found!

    I had help expertise neighborhood and now I know that I need to replace the power supply,

    Thanks anyway,

    Bart

  • HP Pavilion Slimline s7510.se - power switch?


    Hello dlt0207, here is a link for the information you need.

    As indicated in the information, you will probably need to change the power cord with a 110 volt type.

    The 220 volts type is different. You can locate these power cords from 110 volts to many PC vendors and other service providers. They are inexpensive. The difference between the two cords may be at the end that plugs into the wall outlet. The end that plugs into the power supply should be the same.

    While I saw no mention of the cycles, as most of the 220-volt power sources operate at 50 Hz, and the United States operating at 60 cycles, this should always work but can cause the clock is not incorrect. The power supply HP may automatically change to 60 cycles when the device on 110-volt setting.

    Just locate the slide switch to red at the back of the power supply and drag it to the position of 110 volts.

    I hope this helps.

  • Mac Mini does not not at the power switch

    This afternoon, I found my Mac Mini (mid 2011) off.

    The Mini no longer meets the switch.

    Removed all devices (network, display, Thunderbolt, usb etc.) and perform a SMC reset. No luck at the first attempt, nor the second test.

    Death of power? Or someone has another idea?

    Kind regards

    Jaap

    If it shows no sign of life as light does not and the outlet is good then sounds like power supply problem

  • hp officejet 6700 premium: officejet 6700 power switch on, menu and wireless unable to connect offline

    my HP Officejet 6700 Premium

    (1) display suddenly 'offline' from my computer.

    (2) the indicator light is on, but no menu or wireless lamps are on... I can't turn on or off using the switch, there's just lit up

    ... I unplugged the power from each end and the led turns on as soon as it is plugged

    ... I have re-plugged directly into wall outlet

    ... I've tried everything on the site within my computer and HP

    ... uninstalled, then rebooted everything and re-installed

    None of the software may "detect" the printer

    My initial suspicion continues even after all that... that my printer is dead somewhere inside, and it has nothing to do with the connection to my routers, computers, etc. ???

    However, my first notes that something was wrong was when I went to print and my computer says the printer is "offline"... Of course, I checked that setting now and he was not in offline mode in the settings.

    Does anyone have a solution or the same suspicion.

    I wrote HP and have failed for 4 days.

    Thank you

    Unplug the unit and let it sit for an hour.  Plug it into the wall directly, do not use any type of power strip.

Maybe you are looking for

  • Apple TV 4 does not recognize my HDMI to VGA Converter

    I bought a KENIMBENI ATV Pro to connect my new Apple TV 4 to an older VGA projector.  The KENIMBENI adapter works fine with any old 2nd Gen Apple TV.  However the Apple TV 4 simply stops as soon as a connect the KENIMBENI to its HDMI output.  Even af

  • Lenovo blue G550 laptop - red, yellow, spots and lines on the screen

    Hello I have a laptop of Lenovo G550 old 2 year, system model 20023 (Dual-Core CPU T4300 2, 10 GHz, 3, 00 GB RAM) running 32 bit Win 7 Home Premium OS with graphics card Mobile Intel (r) 4 Series Express Chipset Family. Months ago, I started having 2

  • Questions of the coverage style window...

    Hello I want to buy a case of style of the cover to my Xperia Z3 (D6603, lollipop 5.0.2) window, and I've heard reports of loss of function after updat lollipop. Is this true? And can I remove the case and switch back cases that I as a different styl

  • Remote Desktop cannot find the computer

    Try to log on the server is running, I use windows 7 and internet explorer 8. I've used several times to link to you connect them to but it is hit and miss, I get the following text: Cannot find the computer XXXX Check the computer name and domain An

  • Forward slash key typing the question mark in the document Word 2013

    My keyboard is configured for English only, but in the past few months I started having this problem where, when I hit the (tiny) slash key, I get a question mark instead (please print, same key). This occurs only in a word 2013 document. I don't hav