Power switch module

Similar Questions

• Compaq Presario SR1522X HELP power switch!

  Help! For the life of me, I can't understand the switch on the front panel. How the hell does it work? My switch will not turn on the computer. I took the front panel off, and I'm completely baffled works even in the switch. Any help would be appreciated.

  Thank you

  Fred

  Hello @Fred_W,

  I understand that your switch does not work and you need assistance. I provide you with a guide on how to make sure it is plugged properly below:

  Step 1. What is the power switch.

  

  The power on / off switch and the hard disk activity and turn on the LEDs are contained in a single module.

  Step 2. Where is the switch?

  

  The module is mounted behind the wall front of the chassis.

  Step 3. How is the power switch set to the chassis?

  

  3 hooks on the module to fix to the wall of the chassis.

  Step 4. When the power switch is connected to the motherboard?

  

  

  I hope that this information helps to answer your question. Given the age of the computer HP is no longer wearing the power switch so if it needs to be replaced, you will need to find a 3rd party distributor. An online search, or possibly a local computer technician must be able to locate the part for your.

  Thanks for posting on the HP Forums. Have a wonderful day!

• Firewall switch module accident

  Three days ago we converted to a PIX to a firewall switch module in our 6509. The firewall ran for 2 days and then began to crash randomly (e.g.4 times in 24 hours). When it crashed, a show on the 6509 module indicates that its status is 'OK', but a command session expires. The only way to get back on the line is a "set power module down" and a "set power module upwards.

  The accidents occurred in busy periods and in the middle of the night where the traffic was very low.

  Messages sent to the syslog server by the switch & the firewall module indicate anything - normal messages (debug level) and then no further communication between the engine firewall.

  8.3 switch (3) CatOS and the Firewall version 2.2 (1). Firewall configuration is relatively simple - indoor/outdoor + a dmz - and almost identical to the configuration used on our old unit of 6.3 (3) PIX.

  Has anyone seen this behavior before? Are there troubleshooting suggestions for me?

  I appreciate any suggestions.

  -Peter MacNeil

  City of Hamilton

  Hello

  We have seen hang & crash issues. most of them is fixed in the most recent codes. I would say to just upgrade the code. If you want that the bug ID you can get by opening the case with TAC and providing the news of the accident.

  Thank you

  Nadeem

• Satellite A100-033 - where to get the cable/connector for power switch?

  Hello

  I change the cable/connector for * power switch button * which connect to motherborad. If anyone no where I can get in? I tried at PC world, but they do not have cable, I am looking.

  My laptop SPAC:

  Satellite A100-033 part number: PSAANE-03J02GEN

  Thank you

  Hi rjbuz,

  I can t tell you the part number because I m not the owner of the Satellite A100, but a service provider authorized in your country can do this:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Just give them a call and ask. Maybe they can send you the replacement part. :)

• Gigaframe L80 forget automatic power switch time and brightness settings

  Hello world

  I'm on my second gigaframe l80 and it has just developed the same problem that the first seems default back to factory settings.
  Then he forgets his automatic power switch time and very annoying brightness adjustment!

  Has anyone else had this problem?

  a soon fly

  Hello oozie.

  I also own a Gigaframe L80 and it works very well.
  Have you plugged the permanentely power framework (using the AC adapter)?
  How long does it take, the framework sets the default settings?
  Have you tried "reset" of the image using the small button on the bottom of the frame?

  welcome them

• LifeDrive power switch broken switch

  Help.  My Lifedrive is 4 years old and has worked well for the old technology.  However, the power switch broke.  In other words, it slips easily rather than move the on/off switch and does not have the power or not.  The last position has been LOCKED.  So I can't enter the data.  A soft reset brings to the top of the screen, but the screen has half shaded numbers and does not recongize being touched or tapped.  There seems to be nothing that works.  A hard reset is not possible because the on/off switch does not work.  Most of my data is synced with my computer.  But I did an interview with oral history and voice Memos do not sync for palm desktop.  So my questions are: 1) does anyone know how to activate a locked Lifedrive with a broken switch for power on / off?  (2) someone knows how to retrieve voice memos to a unit in this condition? (3) does anyone know how to fix a switch broke on a palmOne Lifedrive?  Really hope someone can help.

  

  This is what it looks like after removing the plastic shell.  The piezoelectric speaker is attached to the plastic shell.

  

  Disconnect the battery from the motherboard.  I use a small Flathead screwdriver to separate the connectors softly.

  

  Remove the battery disconnected.

  Write it now, numbers 1 to 4 on the pieces of blue plastic that supports the microdrive; in this way, you won't get lost as all back you together.

  

  The microdrive is connected to the interface of CF. There is a sticker of warning placed on the lower part of the microdrive and interface see cut carefully through the sticker between the CF card and the microdrive with the tip of the knife.  Gently, remove the microdrive from the CF interface with a flat head screw metal or equivalent.

  
  Now the microdrive (in my case, a memory of 32 GB compact flash) is half disconnected from the interface CF.  Continue, making sure not to damage the delicate pins.

  

  Congratulations!  Completely unplugged.

  

  Remove the microdrive (or CF memory).

  

  Disconnect the cable of the microphone of the motherboard in the same way you did to speaker wires.

  

  Unplug the connector for cable film gently with a plastic or equivalent flat head screw.

  You don't want to have cables delicate film cut by accident, so be careful.

  

  Unplug the connector for a another movie cable gently with a plastic or equivalent flat head screw.

  

  Remove the two very short torx screws.

  

  Finally, the motherboard is thrown, and you can see what happened to the switch.

  

  The central internal switch at the top of the motherboard has proved to be in the locked position.

  

  One of the two legs of the plastic piece was found to be broken.  The other leg looked ok.

  

  I slipped inside switch to the unlocked position manually.

  

  Another picture of the internal switch.  If the internal switch turns out to be broken, refer to

  http://1src.com/forums/printthread.php?t=121887 and order a new switch from Mouser Electronics, www.mouser.com
  Part number: 688-SSSS7A0101
  Manufacturer part number: SSSS7A0101
  DESC: SP3T W / BACK WINDOWS
  Switches slide ALPS SMD
  RoHS: compatible

  I think that your internal switch is not broken.

  

  Put the motherboard back such as the plastic piece can slide the internal switch to turn on or off position.  Be careful not to break the other leg healthy in this process!

  Put everything back together carefully.  You start your Lifedrive, you will notice that the date and time are the default, put it so well.   Good luck to you!

• problem with power switch only works a 'cold' start after pushing several times.

  Original title: power switch problem

  The power switch on my computer doesn't work as a 'cold' start after pushing several times.
  Could I have accidentally re-set one "true or false? spend in the registry while trying to solve another problem?
  Dave

  Hello

  Looks like that the power switch has developed a problem, probably about to fail.

  Whatever settings are they should be consistent and not need to several tests.

  Check with a real computer store (the one that makes its own internal and no service
  leeks and glances at a Best Buy or other stores) or system manufacturer support
  (for systems custom Integrator system and the manufacturer in the case of construction of House).

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 2000-2D02TU HP: HP 2000-2D02TU Power LED power switch but the laptop does not start.

  Someone help me.

  HP 2000-2D02TU Power LED power switch but the laptop does not start.

  What I'm doing.

  Please help me

  Model No. - HP 2000-2D02TU

  Hello @Alok_Bhai,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the laptop won't start does not and wanted to help you!

  You indicate that the lights are flashing, but the laptop does not start?  If this is the case, try to review the following document and let me know how it goes:

  Computer does not start and emits a LED or beep Code

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Pavilion a6512p power switch wiring / card mother pinset

  Looking for a diagram or pinset for Pavilion a6512p desktop pc.

  A friends PC is DEAD.  Then as he would not pass a person removed the power switch and the switch wiring.

  I try to find why the PC is DEAD.  Good power - LED to a constant.

  Need to go beyond the power switch isssue so need to know how to wire lift PC to power.

  So I can determine if it is the switch power supply or component...

  Any help would be appreciated.

  Should be a diagram somewhere telling me what PIN does what.

  TIA, Gary

  Please use the following scheme;

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• The A3-A20-K1AY support automatic power switch with flip covers?

  I just bought this Iconia and a folding cover to go with it. I can't find anywhere in the settings to activate automatic power switch. Now, I wonder if this tablet has even this feature.

  Yes, he does not sleep automatically when you close the lid. Better to use the button for this.

• dv6-3160us failing power switch

  Power switch switch unreliable, how to order a replacement and installation is the best solution.  Features of the laptop are always superb, only the power switch begins to fail.  Thank you

  It is the part:

  4) power button (includes cable) 603682-001

  Here is the Service Manual:

  Your manual

  Part on eBay:

  http://www.eBay.com/ITM/603682-001-DA0LX6PB4D0-new-genuine-HP-power-button-Board-W-cable-DV6-3000-/271288625027?PT=LH_DefaultDomain_0&hash=item3f2a0fe783

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Bug to stop random, DIFFERENT from the power switch question

  I found a problem that I have yet to isolate the cause of the, but his is happened a few times now.  Sometimes, when my Sansa has updated its database and has not played a song at the moment, if I change the settings and then try to play a song, it starts to play, then cut completely.  It doesn't happen often, but these are the circumstances each time.  The player will not respond and will refuse to power on.  The only way to get on is to hold the power switch until the device resets, release, and then power it turned on, which of course means another data refresh.  Once this is done, my settings are all back to where they were before the last change, I can change their return, and everything works fine.  As I said, the problem don't occur often, only about 3 times since I've had (since June), but its still an obvious problem.  If someone wants to know more about it, or want me to try a few things, let me know.  I'm mainly just let Sandisk people know, then maybe we can get this in a future firmware update.

  New firmware is in the release process now, so hang on until release us the next version.  It can help about this.  Should be within 1-2 weeks.

• Power cooling module: has it gone bad?

  I have an old PS4000 which is long out of warranty and I'm trying to decide or not to unassign or re - purpose, but lately, I've been making the mistakes related to the cooling module power once a week.  The error indicates, "Power cooling module 0 is off or not getting any power.  When I log in and check the status of the appliance, all this indicates OK.  I can not any assistance from the Dell Technical Support because it is out of warranty, so I'll try to understand if there are troubleshooting steps I can take to determine whether or not the power module should be replaced in order to get the price and see if it is useful to replace the module or the whole scrap.  Thanks in advance.

  Hello

  PCM is part of the diet, so the entire power supply should be replaced.   Most likely, you will need to find a unit that is used/given to nine.  I don't think that you can always by these Dell and more.

  What firmware is running this table?   Firmware might be very old.

  Kind regards

  Don

• I get message 'Error switching modules' after upgraded to 6.3

  I've upgraded to the stand-alone 6.3 Lightroom (from 6.2) (not CC) version.

  When I run Lightroom, I get the error message "error when you try to switch modules.

  I am under Lightroom on a MacBook Pro with El Capitan.

  Next big disappointment after 6.2 issues...

  After uninstall, 6.0 installation and then manual (not through application Manager) 6.3 update its working again

• Compatibility matrix for Cisco Catalyst 3012 Switch Module

  Hello

  I'm checking the compatibility of the VMware vSphere 5.5U1 Guide and an IBM switch module Part Number: 43W4401 product name: Cisco Catalyst Switch Module 3012. The search of the matrix returns Cisco 1GigE I350 LOM who seems to identify the drivers of Cisco.

  Can anyone help clarify and check if this IBM re-branded chassis switch module is supported and to a specific firmware for the switch code? Thank you all.

  L2/L3 switches are off-limit of drivers for vSphere hypervisor, so you don't find on the HCL...

  Here's IBM BladeCenter matrix interop for VMware:

  IBM ServerProven compatibility

  and here is the interoperability of the switch Cisco Catalyst 3012 with IBM BladeCenter chassis:

  IBM BladeCenter Interoperability Test program

  I hope this helps...