Power with my Tecra M4 problem

Similar Questions

• Power with Satellite L20-121 problems

  Greetings
  My Toshiba laptop model is satellite L20-121 PSL20e.
  OS: Windows XP Home Edition
  When I restart windows, windows stops, then the led power and WiFi will Flash once and the laptop turns on again and when I stop, the laptop turns off correctly, but when I press the power button to turn on the laptop again, the led power and WiFi will Flash once, the laptop does not light and I have to wait 5 minutes about yo start it again.
  I sent it to the Toshiba Service Center in my country, and they said "we must restore the recovery image", even if it's a hardware problem, not a software, and at the same time, I'm very busy and don't have the time to reinstall the entire system and software applications still.

  What proves my idea it is when I enter SETUP (F2) and output the laptop do the same thing (the LED will blink once and no longer lights)
  The same thing with the BACK... or Linux live CD
  Once the laptop is turned off, it cannot turn on again. only after 5 minutes

  I recorded my laptop in the Standard online warranty system, I hope it helps me
  I have only 4 months remaining

  Appreciate your help
  Thank you

  Hello

  You can do the following: update your bios if not already done and then try with different operating systems (linux, windows, etc.) if the error reappears, then you should send your machine to the partner service and the statement that the error occurs independent of the operating system running.

  Sometimes, they need a few comments otherwise they won´t anything...

  Welcome them

• Power with Pro 4340 Sat problems

  Hello

  Since I replaced my cd player, I have a very big problem with my battery. The new drive works fine but battery led flashes very fast (abnormal fast) and the battery is not more (that is 91%). I can't use the battery more because the laptop is not starting from the battery. I have two batteries, but none of them works. I can only use the laptop with AC plugged in and the indicator light flashes (orange). I checked the battery with a multimeter and all right, so I really don't know what the problem is. There must be something like a card in the motherboard as the input power is 15v, is there something wrong with?
  (btw. I already checked the cables)

  Thank you very much!
  Elmer

  Hello Elmer

  In my opinion there is some problem with electronic power supply to the motherboard. Abnormal, fast flashing battery LED is not known to me, just flashes code.

  In my opinion, you should contact partner in your country. Talk with them and seek advice. Maybe they can check the device.

• Power on Tecra M2 problems

  My Tecra M2 will be commissioned, but the battery is still dead, if I remove the battery and just use the power cord that the machine starts up nice work as it should then just cut, after five minutes.

  Also, it starts with the battery and the power cord but after five minutes, as before but flashes then dies.
  If I let the machine closed to recharge it charges for five minutes before the power supply green led turns off with the amber battery light. Then the power cord light flashes in orange.
  I have to unplug it and remove the battery to make it back to the State of charging.

  The machine was working fine before and runs on xp pro.

  On this virtual path, it is not easy to say what is the problem, but after reading your ad, I think that your Tecra has problem with electronic control gear.
  To be honest I don t think you can do something about it.

  Of course, it can be checked by the service of Toshiba, but I think it's too expensive for this old piece of hardware.
  In my opinion you should backup all your data and sell it on ebay. Someone can buy it to use different hardware components. I think it's time for the new laptop computer.

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them

• Tecra M7: Problem with graphics.

  I have a problem recently with my Tecra M7.

  I have unwanted points and lines on the screen and also sometimes the screen is blank or vision pauses for several seconds.
  After my experience with desktop computers, I thought it should be the GPU, but I have no idea how Nvidia NVS Quattro works.

  I recently installed a new Windows XP Tablet to check if a problem with the software, I have also installed the latest gpu drivers of the site so I don't know that this is not a software problem.

  This may happen the other thing that GPU? Is it possible to replace the GPU if there a problem?
  I bought my laptop on Nov 2006, so almost 2 years, how many years is the warranty period for the gpu to the United Kingdom?

  Thanks in advance.

  Hello

  Connect the external monitor to your laptop and see if the problem still occurs. If Yes, I'm afraid there is problem with the graphics card. Unfortunately the graphics card can be exchanged separately. The entire motherboard must be exchanged.

  There is no warranty period for each component material, but for the laptop as a product. It depends on the country of purchase. Try to check the warranty on http://gedb.toshiba.com/

  Good bye

• Watch OS shows 3 past mode of power with almost total of battery reserve

  Hello world

  I have a problem since I updated my watch to watch OS 3. Watch (series 1) goes into unexpected battery power with an almost total reserve mode. It produces one or two times a day and the only thing that I recognize that the watch remains black when I look at my wrist. It shows only the time in green numbers when I press a button and I need to reboot by pressing the two buttons. After the reboot, the watch displays + 80 or even 90 + % battery life and it works as expected for the rest of the day (if is not the same problem from happening again). Especially my battery is 50 + % at the end of the day.

  Today I reset the watch and recovered from backup, but that changed nothing. The watch went to the mode of power with a range of 78% a few minutes ago

  I am really frustrated because it happens very often and I could not find a solution to this problem. Decommissioning watch OS 2 is not an option...

  Thanks in advance for your help, I am really stuck on this issue.

  Best regards from Germany,

  Matthias

  Hi, Matthias

  If your dial of the Watch includes the complication of the battery, it is possible that accidental screen interactions are causing your issue.

  Tapping on the complication battery indicates the level of battery with a large button to put the watch mode of power reserve.

  You can consider using your watch for a while without this complication on the face of the watch to see if the issue is recurring:

  Change the face of the watch on your Apple Watch - Apple Support

• Strange keyboard in Tecra S1 problem

  I have a problem with my Tecra S1.
  When I type a J I'll get 4 characters "qsd."
  With the am 'it gives' xcv. All other keys are ok...?
  I have the air of the keyboard is programmed or...
  When I boot with a bootable cd, I also get this problem...

  (Sorry for my bad English... :))

  Who knows about this problem?

  Thanks in advance!

  Hmmm. have you activated the keyboard FN + F11 or FN + F10 options?

  Notwithstanding these option may be enabled everything looks like a malfunction of the keyboard. In the worst cases, the keyboard needs to be replaced!

• Re: Can you use a Port with a Tecra A9/127 Replicator?

  I recently bought a laptop Tecra A9/127 to replace an existing HP machine. I used one with the old laptop port replicator to save having to keep Plug and unplug cables all day.

  The new Tecra has built on the port replicator under the machine but I can not find information, parts etc. numbers what are a suitable for this machine port replicator. I asked my provider and they also drew a blank.

  I can always use a port USB duplicator, but it seems strange that the laptop is equipped with a connector, but it doesn't seem to be an available port replicator.

  Has anyone else had this problem or found an another port replicator that works?

  You know the Web from Toshiba website Options & accessories?
  You will find information about the supported options.

  Here's a path:
  http://EU.computers.Toshiba-Europe.com-> product-> Options & accessories

  Choose your series of laptop and check what parts can be used with the Tecra A9

  Greetings

• Power power on Satellite C870-1FZ problem

  I use my laptop on WIndows 8.1 - 64 bit.

  When the power cable and the battery are connected, the laptop just will not start. When I remove the battery and use only the power cable it starts and runs normally. It also seems that the battery does not load.

  Who has a solution for this problem?

  Hello

  I m bit confused why the laptop does not power upward with battery connected.

  Generally even if the battery would not charge due to the age of the battery, the laptop must turn on correctly.

  However, if does not resemble the adapter would be defective because the laptop works properly using the main power supply.

  That's why I came to the conclusion that the battery or card mother s electronic power supply could cause this problem.

  As a new battery is much cheaper as a new motherboard, I recommend you to check the functionality of the laptop using another, compatible and good working battery.

• I have an iPhone 6 and get this message. Continue coarse iCloud on this iPhone approve him to one of your other devices using iCloud or enter your iCloud security code.  I don't know my security code and only have my book of power with me.

  I get this message on my iPhone 6.  To continue using Icloud on this iPhone, do agree with your other devices using iCloud or either your iCloud security code.  I don't know my security code.  I have my book of power with me how check my iPhone 6.

  Mike.

  Hello

  For checking your apple iphone should send you a massage to your other device

  With a code.

  See you soon

  Brian

• I have a partitura with 18 instruments. Problem is that only 16 of the sheed. How can I vertically down the music?

  I have a partitura with 18 instruments. Problem is that only 16 of the sheed. How can I vertically down the music?

  Make a score set with 18 all instruments. Then use the scale parameter set score to all fit on a single page.

• Can I use PC400 RAM with the Tecra A4 (Pentrium 750)

  Can I use PC400 RAM with the Tecra A4 (Pentrium 750), currently PC333 is mounted.

  Thank you

  I put t know if you can use but AFAIK Toshiba recommends using these modules on the Tecra A4:
  PC2700 256 MB (PA3311U - 2M 25)
  PC2700 512 MB (PA3312U - 2M 51)
  1024MO PC2700 (PA3313U-2M1G)

  Here are the modules of single channel 166 MHz DDR333/PC2700, DDR SDRAM, 200-pin SoDIMM.

• The use of other adaptors with Toshiba Tecra M4

  I have two Toshiba (PA2450U and PA3282U) adapters that also seem to work well with the Tecra M4. Is their use with the Tecra M4 something which can be recommended? Is it bad for the battery?

  Hello

  AFAIK the Tecra M4 has been delivered with this adapter:
  Universal AC adapter 15V 5A 75W 100-240V AC 50-60 self-adjusting, Hz - part number: PA3378U-1ACA

  The AC adapter - PA2450U uses voltage 15V 4A
  The AC adapter - PA3282U uses voltage 15V 5A

  In my opinion, you should use the supplied original AC adapter / CC, because in the long term, other adapters may damage the battery.

  Good bye

• I'm having problems to connect to internet with my iMac, no problems using my macbook pro in the same room, also see other peoples wifi appearing

  Having problems connecting to the internet with my iMac, no problems with my macbook pro in the same room, also seem to be picking up another Wi - Fi connection to others

  Go to > use Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support