Power WT310 - 10 c on AC only

Similar Questions

• Standby power problems M30-344 (CPU uses only 600 MHz)

  Hello!
  In my m30 344 motherboard and display are changed.
  Now I can't use the full 1.5 ghz cpu!
  In the power saver profile I can choose only the cpu rate of 1-3! I've now uninstalled this tool and reinstalled the version by the net. But I can use only 600 mhz!
  What can I do?

  [Edited by: admin 7 May 05 08:18]

  Hello

  As far as I know if the motherboard is changed the speed of the CPU will be around 600 MHz and in this case the service partner needs to update the CPU microcode. After that, the speed of the processor will be as before.

  I hope that you have already solved your problem with the speed of the processor.

• I bought my palm tx 3 years ago... problem: the power button work anymore; appear it only in a white light scanning when I press on the back 'home '.

  I've had my palm tx for 3 years now and I have had some problems with it. (because I bought it on the web, there was the guarantee) the first problem is the "power" does not work anymore? and the second, the scan goes blank (white) when I press one funds 4 (calendar or at home...). What could be the case of this defect?

  I bought my palm tx 3 years ago... problem: the power button work anymore; appear it only in a white light scanning when I press on the back 'home '.

  The warranty on a TX is only 1 year from the date of purchase.  Yours is way past the period covered.

  The switch was a small part of the TX.  Pressing any other button will turn on the unit, and it will turn off let it expire.

  There is a wire on the switch repair yourself, if you're a DO-IT-YOURSELF person here type:

  http://Forum.Brighthand.com/showthread.php?t=255871

  Have you tried a Soft Reset?  A warm reboot?  A Hard Reset?    Resets are explained here:

  http://KB.Palm.com and enter 887 'ID of Solution '.

  WyreNut

  Message relates to: Centro (AT & T)

• my power cord will charge the computer only when I hold firmly to the computer

  The model MacBook Pro 2009 - I went through 3 power cords now only in the last months - now, it can load the device only if I turn the end a small amount and keep the pressure on her...

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• On battery power my Satellite A100-233 runs only 1 hour

  Hello

  I would like to know if it is normal that the battery lasts 1 hour. Everything I do is either go on the internet or use word doc or power point presentation. I can't watch a dvd without the use of power due to the battery. I would also like to know what battery normally comes with the Satellite A100-233.

  Hello

  It's not easy to say how long the laptop will only work with the battery power.
  Battery working time depends on the use of the laptop!
  In your case I guess the laptop should run about 1h30min 1h15min

  You Satellite A100-233 belongs to the series of PSAA8E. Am I wrong?
  Well, this series was delivered with a 4000mAh battery. As far as I know the price part number indicated PA3399U-2BRS PA3399U-2BAS

  Anyway the 4000mAh batteries are standard and are not very powerful.
  If you want to run the notebook much more on battery I advise to use the batteries as:

  Battery pack high capacity PA3400U-1BRS (Li-ion, 12 cells, 8600mAh)
  PA3478U-1BRS extended capacity battery (Li-ion, 6000mAh, 9-cell)

• Eqiuim M40X - on battery powered powe it works for 20 minutes only

  The battery only works for 20 minutes, if the power is cut off.
  The laptop is almost a year.

  Hello

  Looks like a battery will lose life time performance.
  The fact is that several times the battery performance drops.
  I heard that after about 500 times procedures for loading/unloading of the performance will be declining.

  Well, in the user manual you can find some useful tips how manage the battery for longer battery life.
  In you case the new battery should solve the problem

  PS: The guarantee covers the battery for one year!

• psc2510 work before the power failure, crashes attempt to restart only show a static hourglass

  failure fine t. prior printer doesn't work. Once the power is re-established, printer will not end the initialization process, everything crashes and a static hourglass appears, running windows XP Professional, HP printer to wireless photosmart psc2510

  Pull out the power cord from the printer and the wall for 10 minutes.  Reconnect and try again.  If this does not work, the printer or the power supply is toast.

• Qosmio G20 - 139 flashing indicator power DC only used

  Qosmio G20 139
  System does not boot, gives a flashing orange DC power indicator only.

  No other indicator.
  Seems to be a code. If I read gives 332
  Battery is fully charged and tried more than one power supply.

  Checked the voltage on the inputs MB seems OK
  Have you tried all the combinations of battery and network combinations but nothing changes.

  Hmm... looks like a hardware problem on the mobo...
  Check the memory sticks.
  Remove one and try to power the unit using a module only.
  You should check both with different combinations means you should check also the two memory slots.

  My computer laptop didn t start because of the defective module.
  However, if this does not help, then you will need contact a local technician because the guy could locate the defective part.
  But I think it could be a motherboard problem, which means that the new Council would be necessary and this can be very expensive.

• Portable computer L500 satellite starts only with power supply

  Hi Please help me
  I brought my laptop say there are 3 or more weeks... I'm working on the battery and power, but just now I can only run in power.

  Its like the battery does not exsist. It indicates that the battery is charged to 100% but the computer does not light with the power of the battery...

  Any suggestions would be highly popular...

  -d-

  When the operating system is loaded is recognized correctly battery?

  In any case, this behavior is not normal and maybe you should contact the nearest Toshiba service provider and ask for help. They can check the battery and the power supply electronic and see what's wrong here. The warranty is valid if new battery or repair will be free.

• The A7r will work with only the power adapter plugged

  I want to use this camera (once I have purchaced one) to copy photos and slides.  There may be a lot of time involved, and it would be nice not having to worry about battery life.

  Hello oldchas! AC adapter / CC of the A7R is not able to provide a continuous camera power while it is operating. Only a charged battery can power the device. Power must be turned off and the camera connected to the AC adapter to charge the battery. The battery is not charged if the switch is on when you are connected to the power adapter.

  If my post answered your question, please mark it as "accept as a Solution.

• Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button

  Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button. It this causes only after I opened Firefox, my computer works well before the opening of Firefox. I h

  It looks a little like yo maybe has a hardware problem on your computer. have you tried to repair permissions on your hard drive? create a new Firefox profile? Use the Profile Manager to create and delete profiles Firefox

• Satellite Pro U400 starts - power problem?

  Hey,.

  my liquid U400 down without any reason and doesn't start anymore.
  My first idea was damage from CPU, but even if the laptop is taken to power the power led does not illuminate.

  (1) make U400 notebook work normally when the battery is removed, but pluged in power? Because if not maybe only the battery is broken.
  (2) any other ideas? :)

  Guarantee is more than 1 months :(

  Answer to your question is YES. You can remove the battery and use your laptop with AC power only. In most PC stores showing the rooms are placed laptop without battery. Probably the batteries have been stolen in the past.
  Anyway, they can run with AC power only.

  When you connect the laptop to the power plug and the power light is not on I assume that there is a problem of electronic power supply.
  Contact the nearest authorized maintainer and ask for help.

• Satellite P300-156 PSPC4E - stay white media LEDs on after power off

  Hello

  I have a Toshiba laptop Satellite P series P300 156 (PSPC4E) which has just developed a problem

  When I turned off the laptop stops normally, start button / stop itself turns off, but the white Media 6 LED to the right of the power button remains constantly. The only way to get these themselves to turn off is to disconnect the battery.

  Can someone please advise

  Thank you very much

  Hello

  I'm don't know if this will help, but try to set the BIOS to the default settings or try to disable the LED lighting in the BIOS settings.

  Play around with these settings.

• Power supply broken by Satellite L10

  Whenever I plug the power connector, the power LED doesn't light up.
  Only when I move the power cord, it happens.
  I googled around and this seems to be the connection of the power jack on the motherboard broke.
  Many alternative power are available on ebay, the only problem is that my type of laptop is not listed.
  It's a L10-103.
  Can someone tell me the type of DC powerjack can I use?
  TIA

  Hello

  I have goggled around and, unfortunately, I wasn't able to find the right part.
  But you worry about don t; You can purchase these parts from the Toshiba authorised service provider in your country.
  I think that guys will order the CC of lacrosse head of Toshiba.

  Good luck

• Satellite X 200 - 15 K power on but the screen is black

  Hello

  I have Toshiba Satellite X 200-15 K, two days ago, I have problem with screen, the screen I have noise, I think it's the same error in my display driver and I have stop near windows xp and try to after 1 min, but the screen has more noise when the startup boot image and I stop by button / stop on laptop.

  Then do what I ve tried again to turn on my laptop but on the screen, I see only artifacts (same squadrons of colors) and after that, my laptop can not work, I tried to power on him but I only power led and HDD light works only 5 sec and after off the coast, and the cooler works 5 sec too and after offshore.

  I tried to remove the battery and the RAM and the wireless and all that I can :), but nothing happens, but when I try to power without RAM I see on power light beep two red and two yellow (IE my motherboard work).

  Maybe it can help me. I think I have dead motherboard.
  And for me, it is interesting that someone may have similar problems.

  Thank you.

  P.S Sorry for my English :)

  Hello

  Let's summary.
  You had a few artifacts on the screen, and now, you are not able to start the unit.
  Nothing appears on the screen; Neither the Toshiba start screen appears is good?

  Hmm seems material issue I m thinking about GPU (graphics chip).
  What do you think of this?

  If it's really a problem of graphics card, then you will need to replace the motherboard.
  In most cases the chip belongs to the mobo anyway... something like this can be done by an ASP in your country.

  Then please get in touch with the guys to get more details about this

  I wish you good luck