Database Oracle and VirtualCenter 5.0 on the same server?

Similar Questions

• Installation of TEST and Dev or screw in the same server

  Hello
  
  I have a test instance that is running in sun solaris 9. Since I have enough disk space I intend to install the screws or dev env in the same server with different ports.
  
  anyone tried similar installation?
  
  Thank you

  Hi user;

  I have a test instance that is running in sun solaris 9. Since I have enough disk space I intend to install the screws or dev env in the same server with different ports.
  anyone tried similar installation?

  You can do this, I have already R11 and R12 and R12.1.1 on the same server. The main problem here is your server can handle all your instance on this subject, you may have a performance problem but thatsall.

  Either way, I suggest take oraInst.loc, oraInventory oratab file under/etc and and also create new user (applmgr-oramgr) of your new system

  Respect of
  HELIOS

• Restore the backup with a new name and a different location on the same server

  Hi all
  
  I did a complete backup of my current PROD. Is it possible to restore the database on the same server, but with a different instance name, db_name and on another location?

  PRM says:
  Hi all

  I did a complete backup of my current PROD. Is it possible to restore the database on the same server, but with a different instance name, db_name and on another location?

  If you use RMAN my awnser is not.

  You cannot change the name of the database before open resetlog.

  But you can make this work without problem using the same server.

  You will need to change some parameters.

  Create a PFILE from SPFILE (prod) change parameter 'db_unique_name' file new name (ex TEST).

  Change all the value of PROD TEST except db_name parameter must be PROD.

  CREATE a SPFILE from this PFILE (spfileTEST.ora)
  Create a new password file (orapwTEST)

  So you can start this new Instance_name (TEST).

  Restore the PROD to TEST instance database, you will need use set new name to the file data or database (depends on which version you use)

  Retrieve the instance PROD database (TEST)

  It is time to open resetlogs...
  !!!!!!!!!!!!!!!!!!!!!!!!!!!! ATTENTION HERE!

  You need change redo log location before open resetlogs, you must query v$ logfile member column and change it to another location.

  After change you can open resetlog.

  Now its time to change name of database.

  Stop and start Mount

  Use the NEST

  NEST target=sys/password@instance DBNAME = TEST

  When this process is complete, NEST will be closing database.

  So you will need to start with nmount change db_name to the TEST and reset the parameter 'db_unique_name' (alter system reset db_unique_name)

  Then stop and start upstairs question OPEN DATABASE RESETLOGS and is done.

  HTH,
  Levi Pereira

  Published by: Levi Pereira on August 27, 2012 13:09

• Can the ESXI 5.0 and Vmware View coexist on the same server blade

  Hi team, sorry for the basic question, but can I install the ESXI and Vmware View on the same server?

  Kind regards

  Ismail

  VMware view installs inside a server operating system and he can definitley be installed inside a server running on top of vSphere.

• PowerCLI and vCLI - install both on the same server

  Hello

  Probably a stupid question, but I vCLI installed on the server vCenter Server (necessary for a health script that is running)

  Can I install powercli on the same server and use powergui etc. ?

  See you soon

  When your environment is locked, you of course have to execute scripts on the vCenter.

  It's a trade-off between security, ease of use and potential risks.

  But each site must make their own environment analysis

• CSA 5.1 and 6.0 MC on the same server

  Hello

  Anyone know if there are problems with enforcement MC 5,1 CSA and CSA MC 6.0 on the same Windows 2003 Server?

  Are their questions with them in writing to the same database?

  I'll have to upgrade the 200 server operating system to SP2, so I hope that this does not affect the existing MC 5,1 and Agents 5.1 who still use the MC 5,1

  It's actually a secanario of migration it should work fine. I had no problem with 5.2 and 6.0 on the same system.

  Tom

• ESX4.0 lost connection and impossible to reconnect to the same server

  Three virtual machines is is stuck on one of my ESX Server 4.0, no was not able to close the same then I restarted the service management of vmware for the same order.

  restart of #/etc/init.d/mgmt-vmware; chkconfig mgmt-vmware on

  Now, I've lost the connection to my server ESX 4.0 and when I m trying to reconnect it gives me out of "time" error

  What should I do to fix the error?

  Concerning

  v

  I know that the article is for esx 3.5 but it might be useful to have a quick glance at the Article KB VMware: 1005566

  If you found this helpful, please consider awarding points

• blazeDS and 2 independent tomcats on the same server

  Hello

  On the same machine that I use two tomcat server. The two Tomcat have the same web application with BlazeDS, but with different parameters.

  I noticed that the Flex application always communicate with blazeds the first that was started. services - config.xml contains a different url for both apps...

  How is that possible?

  Thanks in advance!

  Olive

  The root of the server, port, and the context are defined when you create the Flash Builder project.  They exist in the project properties, and can be adjusted by selecting Project/Properties/Flex Server in the menu bar.  The same properties dialog box is available via click RMB on the project in the package Explorer.

  FB allows only a single server/context by project sheet.  You can programmatically create your channelsets to access multiple servers, however.

• SRM and VCenter on the same server?

  I was just by reading the documentation and I saw that I need to have vCenter in both places in my SRM deployment. Now I'm on a server. SRM and vCenter co-exist on the same server? Is it still a good idea. I don't have a problem with the purchase of another server if I need to.

  I have a follow-up question on the vCenter licenses. Do I need to purchase a second license for the recovering site vCenter?

  -Patrick

  SRM and VCenter can coexist on the same server.  You will see a performance impact when you test your disaster recovery plan.  I think that a lot of achievements have vCenter and SRM on the same server.  If you do not want to take the risk of a performance hit on your vCenter server you might move RS for its own box, but I advise to use a virtual machine instead of another physical server.

  I think that you need a license of vCenter to each site.  If your recovery site hosts only the DR then you can use your existing licenses for ESX.  If your DR will site also its own VM produciton is then you will need full license.

• Oracle 11G and application server installed on the same server

  What are the advantages and disadvantages installation of Oracle 11 G database and Oracle (forms and reports) application server on the same server?
  
  Thank you in advance, Sonya

  Some people might want their data in an area of separate network for security reasons.
  It also depends on if it is the same people who do maintenance on db and appserver.

  It is at a lower cost with a single server and only 1 Os to implement.

• Newbie: Mobile Server and Oracle DB must be on the same server?

  Hello Forum...
  
  I have problems to install the mobile server (ver. 10.3.0.2.0).
  
  First of all, I tried to install within an instance of the OAS (ver. 10.1.3.0.0) - I could not set the password of the mobile server oc4j account in enterprise manager server application and is stuck there. Also, I couldn't connect to webtogo as mobile server administrator.
  
  Second, I have installed the version of stand-alone mobile server, but when I run the 'runmobileserver.bat' I get the following error:
  
  09/08/22 12:54:21 log9: connect as: MOBILEADMIN
  09/08/22 12:54:21 log9: Mobile Server ID not found, impossible to register.
  09/08/22 12:54:21 log9: java.sql.SQLException: ORA-00942: table or view does not exist
  
  Like the previous time, I couldn't connect to the webtogo as mobile server administrator. [OS: windows 2003 Enterprise in both cases]
  
  I was informed by my dba that Oracle mobileserver will work only if it is installed on the same server as the backend database. Is this true?
  
  Thank you
  j - p.

  Hi J - P,

  When you installed the mobile server in stand-alone mode, repwizard was not performed or has failed.
  Try to rerun repwizard with: $ORACLE_HOME/mobile/server/admin/repwizard
  You can check the log file in $ORACLE_HOME/mobile/server/repository.log to see if there is a critical error,
  the repwizard should save your mobile server, you can consult this table: mobileadmin.mobileserver_instances so you can see your host name and port.

  On the Mobile Server OAS installation, you should not need to use the oc4jadmin password as if you installed OAS 10.1.3 and run the runinstaller lite Oracle to install Oracle lite 10.3.0.2. in the same ORACLE_HOME with run of the OAS, it should automatically deployed the mobile server j2ee application in the OAS.

  Kind regards.
  Marc
  PS: To change the OC4JADMIN password you can use the note: Note.460314.1 Ext/Pub cannot establish a connection with OC4J instance mobileserver on application server

• Multiple instances of oracle with characterset different on the same server database

  Hello

  We are finalizing plans to install Automic (software scheduliong formerly UC4) for our suite of retail applications and replace Uc4.

  The process came to know that Automic does not support AL32UTF8 database characterset.

  At this moment we have RMS and UC4 UC4 supports AL32UTF8 and schema for UC4 running on the same database server is inside the RMS database.

  From now on, it is recommended to have a separate database instance on the same server as the RMS database and with a different characterset which is WE8MSWIN1252.

  Is it possible to have 2 instances of database running with different charactersets, one with AL32UTF8 and the other with WE8MSWIN1252. ?

  There are configuration requirements before implementing instances of database?  THS APPWORX (for UC4) schema will be exported (data pump export) and imported into the new database.

  The utility Automic we want to use is not compatible AL32UTF8 and manage only a database of character set WE8MSWIN1252.

  Any help and advice would be much appreciated.

  Thank you

  RAM.

  PL post OS and database versions.

  Is it possible to have 2 instances of database running with different charactersets, one with AL32UTF8 and the other with WE8MSWIN1252. ?

  Yes - without any doubt - two databases are independent and have nothing to do with each other.

  There are configuration requirements before implementing instances of database?  THS APPWORX (for UC4) schema will be exported (data pump export) and imported into the new database.

  You may have - to test the export/import process rigorously. If your source is AL32UTF8 and target is WE8MSWIN1252, data loss may occur for those characters that are in the former, but not the last.

  HTH
  Srini

• Dev to create and test instances of the Summit on the same server and database

  I have a dev and instances of the Apex on different servers of prod. I want a test instance on the same server as the instance of dev.
  
  I use workspace import/export so all the workspaces instance have the same id of the workspace. The application ID is the same on each instance in the same workspace. This allows the pages to be exported or imported in the case of differenct.
  
  My question is (I'm sure it's obvious) I can have several instances of the Apex on the same database (dev and test) and have each the same instance ID workspace, etc..
  
  Sam

  .. often I have multiple instances of the Apex on the same database (dev and test) and I each instance have IDS of the same workspace...

  No, there can only be one Application Express instance in a database.

  Scott

• DBconsole agents and oem12c can operate at the same time?

  Morning and thanks for taking my question!

  I'm DBConsole migration to oem12c.  I want to check that I can install the agent on the target database oem, while DBConsole still works the old-fashioned way?

  Also, would include installing DBConsole emca - deconfig dbcontrol db-rest drop and the removal of the target database sysman?

  Thank you!

  Kathie

  DBcontrol or DBconsole is independent of any agent who and both can run on the same machine. DBcontrol is a standalone product and can handle databases on a local computer. When you install Oracle Management Server, you need to specify and use a separate database with its own SYSMAN account for the SGD server repository. You can add all the machines with the WHO running agent. Note that there are no more DBconsole or DBcontrol in database 12 c, which has been replaced by DBexpress and is much more limited.

• OK to install forms independent 10.2.1 on the same server as the database 10 g 2?

  Is it OK to install forms independent 10.2.1 on the same server as the database 10 g 2?
  
  According to the install for forms requirements check, I have until my kernel parameters of my original config that follows that install the values required for the database. Will I need to worry about these types of changes to the server on how it effects my current database?
  
  Thank you.

  Of course, there is no technical problem other than memory, drives, etc. constraints.

  We use these Frankenstein servers with a mix of Developer Suite and Oracle database of different development versions. Not the best situation, of course. Just be careful of path and ORACLE_HOME settings when doing things like patching with OPATCH since there is more than one instance in which these commands may apply.

  Published by: user577087 on August 28, 2008 01:24