PowerCLI does support VMware View?

Similar Questions

• Powercli does support powershell v2 on XP?

  Hey guys, I noticed MS released the PS 2.0 (Windows management infrastructure) http://support.microsoft.com/kb/968929 for XP.   I would like to upgrade, but I'll keep if Powercli does not support...

  So always works powercli?  Someone has improved their desktop computers yet?

  See you soon

  Packetboy.

  Well Yes, actually it.

  No problem afaics

• Migrate to VMware View 4.6

  Hello

  What are the exact differences between VMware View 4.6 and 4.5.

  What operating system supports VMware View 4.6?

  Do we get the best performance with VMware View 4.6 on WAN?

  Note that 4172 between the connection to the server and security server is not necessary. The correct rules are here - http://www.vmware.com/pdf/view-46-architecture-planning.pdf - there is an entire section detailing "for servers security DMZ Firewall rules. See also http://communities.vmware.com/docs/DOC-14974 for the three steps needed to implement.

  Also note that https is the default value for the configuration of the Security server for interaction with the normal client and the secure tunnel (https).

  Select this option.

• VMWARE HORIZION VIEW 6.0: it does not serve any which RDS (using PCoIP) session to my zero Teradici Clients but it works with Horizon of VMware View client 3.0.0 from my computer

  Hi all

  I'm testing view Horizon 6.0 Service sessions (Windows 2008 R2) RDS through PCoIP. I think that my setup is just because I can connect via Horizion View Client (installed in my laptop or my Android smartphone). But when I try to connect from a Client Tera zero, 1 or 2 (with the latest firmware), at the same time I did logon, I still have this error:

  "View server connection has no return of available virtual desktops."

  Could someone tell what can be wrong?

  Concerning

  As a result of this discussion "Re: RDS support is included in Vmware View (broker)?" I saw that I must spend my customers zero to 4.5.1 firmware. Once I did, Tera 2 Zero Clients work very well but do not have customers zero 1 Tera.

  I expect response from Teradici.

  Concerning

• Support of VMware View and Webcam in Horizon?

  Hello people, once again

  I saw this more recent article which explains that Webcams are not supported in views including 5.1.x.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003777

  Just want to confirm if she would be considered in the view 5.2 Horizon?

  I don't see mention in What's New.  This should be a no.

  http://www.VMware.com/products/view/features.html

  Thank you

  romatlo

  Blogs are correct and it clearly states that the voice is not supported with Lync 2010:

  «.. . users will have access to features such as presence, instant messaging, sharing application, online meetings and sharing whiteboards and PowerPoint presentations.  "Other features such as VoIP calls are not available until a Lync client is matched with a USB IP desktop phone"

  Lync 2013 will have support for voice and video, but only on certain client platforms.

  Linjo

• View 5 does support Linux as a guest operating system?

  Hello

  I would like to know if Vmware started for Linux OS as Fords in sight 5?

  Thank you

  The product of VMware View 5 documentation is available at http://downloads.vmware.com/support/pubs/view_pubs.html

  Page 13 of the 5- http://pubs.vmware.com/view-50/topic/com.vmware.ICbase/PDF/view-50-installation.pdf view Installation Guide provides information on which operating systems are supported for use with the Agent to view software.

  Looking at the documentation, Linux not is not currently supported for use with the agent View 5.

  Hope that helps.

• Microphone in VMWare View support

  Hello

  I'm busy with a proof of concept for VMWare view.  So far, everything was setup and works very well. I am using 4.6 and accommodation view my Win 7 x 64 virtual computer on a Vsphere environment with ESX 4.0 hosts.

  I can connect my virtual machine by using the view via a server client to have view. Once connected, sound works fine, I can open the mp3 or youtube and his works in general. Go to Device Manager I see there is a device called VMWare virtual audio (devtap) installed, even if the parameters of the virtual machine via virtual Center displays obviously no audio device.

  After starting to play with some of our applications, including Microsoft lync, I noticed that I can't make audio calls to other customers Lync, probably because there isn't any microphone support here. I tried to do the same thing from a computer with audio output thinclient / mic Jacks, but get the same result. Is there a kind of driver which allows for emulation of micro as is currently used for emulation of sound card to see?

  The virtual audio device supports only audio output. There are two routes you can go down:

  1. use the USB redirection with a USB headset feature and use your audio device for applications requiring audio in

  2. install the Audio driver virtual Teradici on your virtual machines, which is supported by Teradici rather than VMware: http://techsupport.teradici.com/ics/support/default.asp?deptID=15164&task=knowledge&questionID=421

• Test environment for VMware View 7 - PCoIP Protocol does not work properly

  We test VMware View 7 with as many Thin Clients and customers zero (Teradici)

  When we try to connect via RDP Protocol, it works fine. When we try to connect via the PCoIP Protocol, desktop display seems to blink (about 2 times per second) and display resolution is not acceptable. So, there is a problem with the Protocol (broker or Office VM)

  There are no firewall in the middle.

  Desktop virtual has a clean install.

  So... anyone have the same number? or similar?

  How much video Ram?

  You can increase the video Ram.

• VMware view client have support ubuntu?

  I'm going to depploy VDI environment. But there are many os (windows, mac, ubuntu and centos). Please help me how to install vmware see run on Ubuntu. Thank you

  Maybe http://blogs.vmware.com/euc/2012/03/vmware-view-client-for-mac-and-linux-are-now-generally-available.html can help.

  André

• Two monitors configured using PCoIP does not cover both monitors for VMware View

  Occasionally, I've experienced the symptoms described in KB1027899, when usually the first time of connection for the day that I select multiscreen and the screen is divided in the Middle the 2 monitors using PCoIP. I end up disconnecting and reconnecting to the virtual machine a few times, which is a valid solution, but I'm still curious about why this is happening.

  I am running VMware View 5.0.0 build-481677, on a Wyse R90L with Windows XP Embedded, I use VMware View Client 5.0.0 build 481677 and VMWare View agent on a box of Windows 7 5.0.0 build 481677. We lack vCenter and ESXi 5.0.0 in all areas as well.

  According to the article, this happens because there is not enough video memory configured for the virtual computer. The problem I have is that if I force the pool offices use PCoIP and 128 MB of video memory, I can't RDP to the workstation as the Protocol is locked, I need to still be able to do. I tried manually increase the memory video, but view reconfigures to match the settings of the pool.

  Is there a way to increase the video memory without changing the required logon Protocol? Or is there a fix in a different way to this question?

  Thanks a lot guys.

  Joe

  Have you tried to change the configuration video pool to be 2 monitors with 2560 x # instead of the default resolution to see if that solves the problem?

  Datto

• Multi processor Support of Vmware View type?

  Hello world!

  We currently use with 2 esxi Vmware view manager. We recently VMS more used by the user. We are considering purchasing a new server (since we have an unused license).

  Our two existing Esxi installed on two Dell Poweredge Intel Xeon E5440 (2 x 4 core 2.8 ghz)

  We have a very good price for a Dell that is to have an AMD processor (2 x 6 drivers). It work?

  We believe that this could cause trouble because of the Vmotion... which way an Intel VM to an AMD...

  If I'm not clear enough, not hesitate to ask!

  Thank you!

  see this KB article

  http://KB.VMware.com/kb/1991

• How to fix VMware View Server certificate revocation check connection error?

  Dear community,

  For about 2 weeks, I feel a revocation of the certificate check error in our environment Horizon see 6.2. The strange thing is that, within 12 hours about two (replication) connection servers and the vCenter Server / server of composer (on the same machine) are considered as having invalid certificates, even if, in fact, they are valid (CA certificates). We use no security servers.

  The view admin console shows the following for servers connection:

  The server certificate is not approved.

  The server certificate cannot be verified.

  For the vCenter, he said (that I have validated manually the certificate):

  No problems found.

  Certificate is not approved, but the thumbprint of the certificate is accepted.

  With the connection series on 'full', States that the login server logs for the vCenter server:

  TRACE (B 17-0 - 0E98) < VCHealthUpdate > [NativeKeyVault] validateCertificateChain response: {result = FAIL, EndEntityReasons = cantCheckRevoked, ChainReasons = invalid, SelfSigned = false, EndErrorCode = 16777280, EndInfoCode = 258, ChainErrorCode = 16777280, ChainInfoCode = 256, PolicyErrorCode =-2146885613}

  As far as I can see there no similar entries for login server certificates in the newspaper.

  At the moment I am under the environment with composer and vCenter certificates manually valid and invalid connection (red) server certificates (as view clients and browsers are not disabled).

  I already checked that I am able to do everything 'green' again via setting the registry key 'CertificateRevocationCheckType'2 (as described here Configure the server certificates certificate revocation check). This brings me to the conclusion that one of the intermediate certificates cannot be validated. So, I had the information a "version" of an intermediate (intermediate certification authority) certificate has been revoked. There seems to be no coincidence - like the time point is as well, but this particular version does not appear to be used in the servers of my connection.

  However, even with full logging enabled, I can't information which (intermediate) certificate cannot be validated and why. I expected to see something like 'OCSP verification' or 'check the CRL' but I can't find it in the newspapers. However, I noticed that one of the intermediate certificates lacked the OCSP URL (even if the field "Authority Information Access" existed). Of course I updated the certificate with a version that contains the OCSP URL, but it has not changed anything.

  In addition, I checked manually all of the certificates in the chain with openssl (for OCSP) and CRLs as well, but everything seems to be OK (all URLS are accessible and no opportunity of certificate has been revoked). Actually, I do not interpret the error as "that the connection to the server is an invalid certificate because it has been revoked", but "it cannot check if it has been revoked. The servers do not need a proxy and nothing configured, so (I checked the proxy settings system context, also).

  For now, the problem is not critical, such as 'red' status connection server has no effect on our customers and so I could turn off certificate revocation check (or switch to check that the certificate of the server (2)). But of course, I would really solve the problem.

  Is there someone who can give me a hint on what to check, for example, how do I know which certificate cannot be controlled and why? Someone had the same or a similar problem? Support VMware is working on the problem as well, but they seem don't know is not the problem, either.

  I appreciate the thoughts and responses! Thank you!

  Best regards

  Fabian

  Dear community,

  During this time, I was able to correct the error described at the beginning of this thread. Jump to the end to see what could probably help you...

  1. At first, I installed an additional standalone VMware View Server connection in order to check the following related certificates:
     1. VMware support always told me to renew my certificates because they "were not valid" etc. - even if in fact they were (like external URL calls and attested manual verification and tests).
     2. That's why I created new additional certificates for the login server and configured to include the vCenter even as my production environment - only difference was I didn't inlcude the composer who runs the server vCenter himself.
     3. The result was that the server was "green" including both the vCenter Server certificate which could be 'not reliable' by the environment of production - strange, huh?
  2. After I reset the additional server to a turned wink where connection to the server was not yet installed (before that, I uninstalled the connection to the server in case there is information in vCenter thereon) and reinstalled as a replica of the production environment server. Somehow I expected this, but still quite strange the vCenter Server (and composer) now again was considered "invalid", even if the certificate of the server connection itself considered still valid and green. For test purposes, so I put certifice revocation checking on '2' (only one server certificate check) - but only on the 'old' production servers' and 'magical' everything has been considered valid. So as I see it, there seems to be some sort of information stored on the 'old' connection servers that makes them believe that invalid certificates and that the information is replicated on the third server unless I lower the revocation of the certificate controls on these servers. Altervative explanation could be that VMware View does not accept certificates with aliases that do not include the 'real' server name - that is / was in fact certificates the old servers connection. The new server certificate connection included the real name and the alias. I understand if this is the case, but then I expect that it be documented somewhere (I have not found this information) and also wouldn't understand why it worked without problem for several years before.
  3. After finding that out, I created new certificates for the 'old' connection servers, including aliases and real names and replaced the certificate on one of the servers (and restarted the login server) - only a few successfully. Once I put the revocation checking on '4' again on this server, the login server certificate was still considered valid, but not the vCenter and certificate of composer.
  4. Now, I've uninstalled the old login server (removed from the view) and reinstalled completely (including an update of the 2008 R2 2012 R2 OS) and after I have it reintegrated into the environment, everything remained green - as long I have will activate revocation checking on the second login server "old." This is why I did the same with this (completely reinstalled and reinstated it) and now everything is green with the revocation checking enabled on all replicas of server connection.
  5. The next step I uninstall the additional replica because I created only for troubleshooting purposes.

  So what will no doubt help in similar cases:

  • Reinstall the servers of connection one by one, including:
  • Uninstalling html access (if used), uninstall the login server to view, uninstall 'VMware' AD LDS Instance.
  • Removal of the connection to the server of replication group: run "s - r s uninstalled_ vdmadmin.exeservername" on one of the servers connection remaining.
  • Reinstall/Update OS (may not be necessary, but I did not test that)
  • Reininstall, return to the login server replica. If you used the certificates which included only the alias of the server I recommend you to create new ones, including the name of the server as well, but maybe it's not necessary as well. If you want to keep the certificates which only inlcude the alias it will be necessary to install this certificate after the first replication of the servers (see below).

  My question for technicians of VMware/developers: It is supported to use certificates include only the server alias. Otherwise why it worked before and where is it documented? Where are certificate cached information so that simply replace the certificate was only some, and not a complete success (see above). FYI - when I paired initially replicas that I had to install the CA (including only the pseudonym) after the first replication - now with certificates (including the server name and the alias), I could install the certificate before you replicate (= the login server installation).

• VMware View vGPU pool remote control software

  Hello!

  Normally, we used Dameware for remote control of our CAD user. But in a pool of VMware View, Dameware should not be used, the support has informed us.

  All other pools we used the VMware console, but it does not work with a vGPU.

  What is ofically supported and tested by VMware?

  Best regards

  Joerg

  News Info: Vmware supported Dameware, now!

• VMware View 5.3.1 and functional level Windows 2012 R2 Active Directory

  Hello

  As I read in https://www.vmware.com/support/view53/doc/horizon-view-531-release-notes.html

  VMware View Horizon does not support the Windows Server 2012 Active Directory Domain Services (AD DS) domain functional level. You can use Windows Server 2003, Windows Server 2008 and Windows Server 2008 R2 AD DS with Horizon of VMware View domain functional levels.

  Does this mean I can install VMware View 5.3.1 in an environment with Win 2012 R2 AD set to Win 2003/2008/2008 R2 functional level?

  It is a facility supported?

  Kind regards

  Does this mean I can install VMware View 5.3.1 in an environment with Win 2012 R2 AD set to Win 2003/2008/2008 R2 functional level?

  Yes that's correct.

• With VMware View Server using LDAPS (port 636)

  I've been responsible for something that seems impossible/not supported.

  VMware View Server uses port 389 for LDAP.  My task is to do view to use instead the port 636 (LDAP over SSL).  The accusation is that the replicated servers in VMware View data not encrypted between other on port 389.

  So far in my quest, I did no progress in this project.  However, I was able to test that manual connections can now be performed (with ADSI Edit) with port port SSL 636 other replicated servers view.  Problem is that the view seems to have hard-coded to use port 389 and cannot be moved to use LDAPS.

  There are instructions to do something like this in vCenter (http://www.vstable.com/2012/01/27/vcenter-5-active-directory-web-services-error-1209/) (Security Virtual Lab: & amp; nbsp;) Architecture - Blog - proSauce), but nothing related to the sight of the surfaces in a Google search.

  Someone at - it have a Yes or whinny if possible?

  EDIT: Moved to the correct community.

  It is not easy being responsible for something impossible!

  Connection view servers have an AD LDS instance, and replication between servers using the AD LDS replication. This is a replication mechanism secure by using the replication RPC, LDAP and Kerberos and secure without having to implement LDAP over SSL on 636.

  The articles you refer to are actually on the definition of a port number unused LDAPS access of Web Active Directory Services with vCenter Server to get rid of an event without danger. It does nothing to do with replication between LDAP servers. View prevents remote access Active Directory Web services anyway with a specific firewall rule so that remote users have no access to it.

  The only reason why you can use LDAPS with AD LDS is if you support simple LDAP connections. The use of SSL would mean that the simple bind passwords are not sent in the clear. In the case of the view, simple LDAP connections are not enabled in any case.

  In summary, what you're trying to do is useless.

  Mark