PowerConnect 2816 Wake on Lan - need help

Similar Questions

• R7000 WiFi fast, SLOW by cable/LAN - need help

  I'm on a R7000 connected to a 6141 Motorola with Comcast. Provisioned at 100 Mbps + with Comcast.

  5 ghz wifi, I'm 123 Mbps + speed, but on my LAN connections, the peaks at about 33 MB/s speed.

  I fiddled with all I can think about, or discover, nothing helps. Tried downgrading the firmware = zero difference. I'm back on V1.0.4.30. I tried to disable all QOS and WMM, nothing.

  What is going on? Ideas? This incredibly frustrating to be paying for that speed and get 25% of it on my wired devices

  WOW - that was the Holy CAT5. Just switched my computers to a CAT6 and voila... from 33 to 125 Mbit/s like that.

  Well... If someone has a prob with LAN's slow speeds, check your cables and get rid of the shit CAT5.

• Pavilion p6232it - Wake On Lan feature does not

  Hello

  I work as a system administrator and having 5 of these p6232it on LAN workstations. Product no: VS351AA-ABZ build No.: 94CEv6PrA3, and the BIOS revision is 5.07 (2009-07-06). I can't use the Wake-On-Lan feature, although all other machines (especially s-HP and IBM-s 43) on LAN are able to wake up when the signal is sent to them.

  I tried different settings in the BIOS - did not help.

  I looked at the specs of the motherboard via: http://support.hp.com/us-en/document/c01746799

  It says that the ethernet controller is Realtek 8111 DL, so I found it's specifications at: http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PFid=5&Level=5&Conn=4&ProdID=193

  It is clear that it supports Wake-on-LAN and wake up remote assistance. Intel G43 Express Chipset also supports this feature, but there is no setting for it in the BIOS. I tried to find the update of the BIOS for that motherboard but had no success.

  My questions are: is the function WOL implemented on this specific motherboard? How to activate it?

  I would appreciate any advice.

  Best regards

  Zoran Jackson - Director of system INFORMATICS, Belgrade, Serbia.

  Hello

  zoranjaksic wrote:

  Hello

  I work as a system administrator and having 5 of these p6232it on LAN workstations. Product no: VS351AA-ABZ build No.: 94CEv6PrA3, and the BIOS revision is 5.07 (2009-07-06). I can't use the Wake-On-Lan feature, although all other machines (especially s-HP and IBM-s 43) on LAN are able to wake up when the signal is sent to them.

  I tried different settings in the BIOS - did not help.

  I looked at the specs of the motherboard via: http://support.hp.com/us-en/document/c01746799

  It says that the ethernet controller is Realtek 8111 DL, so I found it's specifications at: http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PFid=5&Level=5&Conn=4&ProdID=193

  It is clear that it supports Wake-on-LAN and wake up remote assistance. Intel G43 Express Chipset also supports this feature, but there is no setting for it in the BIOS. I tried to find the update of the BIOS for that motherboard but had no success.

  My questions are: is the function WOL implemented on this specific motherboard? How to activate it?

  I would appreciate any advice.

  Best regards

  Zoran Jackson - Director of system INFORMATICS, Belgrade, Serbia.

  You will need to install a PCI or PCIe x 1 card network to enable WOL. That function is not installed in the Pavilion p6232it desktop computer BIOS.

  I came across a similar problem during a network turnkey installation here in the Netherlands. I installed as an Intel Pro/1000 GT PCI network cards.

  Best regards
  ERICO

• for Compaq 6000 of Wake on lan

  Hello

  Just bought a HP Compaq 6000 Pro SFF PC second hand

  My problem is simple, Power On LAN works if the machine is in "standby", but not if turned off.

  Yes the network LED turns on, but the motherboard is still as built, so the BIOS needs updating.

  But before that, I would like to know if it is the problem or a second network adapter

  solve my problem?

  Thank you.

  Richard Gamester

  Hello R_Gamester,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more. I understand that you want to activate a Wake on LAN Configuration on your computer, and I'd be happy to help you!

  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do it
  http://h30499.www3.HP.com/T5/business-PCs-Compaq-Elite-Pro/BD-p/BSC-271

  I hope this helps!

  Concerning

• NIC teaming on ESX4.1 with Dell PowerConnect 2816

  I'm stuck trying to get partnering work... I hope someone can help!  I'm under ESXi 4.1 (vSphere), on a server with 2 GB for a Dell PowerCOnnect 2816 cards, supporting 802.3ad

  Here's what I'm doing and the result:

  1. I added a second NETWORK adapter under vswitch0 properties (in ESXi 4.1)

  2. I went to vswitch0 |  Port properties then the consolidation of NETWORK cards and set the active adapters and as road based on IP Hash load balancing

  3 apply/close my way and ESXi now shows 2 map NETWORK interface connected to the vswitch (and everything still works fine).

  Question 1: Shouldn't I lose connection to ESXi at this point?

  4. I go to the page OpenManage and have setup a group LAG (1) with load balancing the value "Layer 3" (which should be the IP Hash I think)

  5. I add 2 ports to the LAG group

  6. I lose my connection to the server.  If I remove the ports in the Group LAG then the connection comes back.

  ABOVE 2: why the connection disappear?  Expected the cluster NIC sync/speak to the LAG on my switch?

  1: you can always access ESXi through TSM (Tech Support Mode) of the local console. This article explains how to:

  http://KB.VMware.com/kb/1017910

  If something goes wrong and you need to reset the network configuration, you need the command-line tools esxcfg-vswitch and esxcfg-vmknic. See the help pages for these commands for more details how to use (there also many guides online as http://www.2vcps.com/2009/11/22/esx-commands-esxcfg-vswitch/)

  Also, there esxcfg-cfgbackup who should be able to create a backup and restore it later if necessary, but I have never used this before ordering. Seems simple.

  2: I do not think that it is replaced by default, it should inherit the policy level superior vSwitch.

• Wake on LAN - AirPort Extreme

  I'm trying to configure the Wake on LAN for my AirPort Extreme and Windows 7 PC, reboot with my iPad.  It works fine when the iPad is on the local network, but no power on the PC when I'm not on my network domestic.  I put airport to the port before 9 to the PC as directed, and made sure the PC has been configured to accept magic packets.  Any help?

  Apple wake on lan system is different... and there is a good chance the router from Apple not go to work.

  The best and easiest around the issue is to install a different router... and use airport extreme for the wireless. Make sure the PC is connected to the main router although no airport.

  http://www.Neowin.NET/forum/topic/1186835-wake-on-LAN-WOL-with-Airport-extreme-2 013 /.

• Wake on Lan for a Mac Mini running Leopard does not

  Don't know where to best this post, but here's.  I'm trying to set up a Mini as a server of music for my audio system.  The Mini is a core 2 duo with 1 GB of RAM of 2009 I think.  Can I upgrade to Snow Leopard (possibly Lion/10.7 if I improve memory, what can I do anyway).  The mini is on a local network using a Netgear router and is only connected through wifi.  No ethernet.  The Mini is connected to a DAC by USB, and which is connected to the audio system.

  I want to run this without screen and keyboard and rely on my iPhone or my MBAir to control the Mini via screen sharing.  I want to leave the Mini sleep don't no need then to wake up when I want music.  Problem is, I can't get the Mini to wake up.  I tried the Wake on Lan and other tools of waking distance so I can start playing the music, but I can't seem to wake up.

  I have the correct MAC address and IP address (I booked a local IP address for him).  I'm sure that the two computers are on the same network.  I put the Mini to wake on lan in energy saver prefs.

  Any suggestions?  Thanks in advance!

  Hi, I have not 10.5 available now and just ask...

  In Sys Prefs is the Mini on Wake for administrator access? (Can't quite rememer what pref pane is in.)

• 800 G2: 2 800 all-in-one, wake on lan to PXE but not hard

  I have a problem with 18 800 2 all in UNITS. I can easily start none of them using wake on lan but, they all want to PXE boot. Nothing I've tried to change in the BIOS has made a difference. I need to start Windows.

  Any suggestions?

  Dan

  @Dan2495

  Go to the BOOT options in the BIOS.

  Uncheck the option of network (PXE) boot.

  Then go to the Options of integrated device.

  Value Wake On LAN for a hard driver start.

  REO

• Satellite P200-18Z: How can I do wake on LAN?

  How can I make WoL work on this computer.
  I enabled it in bios, but I can't even wake my phone to another device.
  I am running windows 7 ultimate, if this material.

  Thank you

  Hello

  You can wake up on LAN laptop if you run a query to a service that is running on the laptop.
  But you cannot wakeup the laptop if you access a data or similar
  You will need special software that send a magic packet.

  Check the Wake On Lan tool. Its freeware and you can download this from different pages

• HP 15-f209wm with Intel Celero: need help with a unusual amenities. Install windows 7 on a new computer windows 10.

  Hello
  
  I am really puzzled here and need help you guys!
  
  A friend of mine, who is not computer savy is used to windows 7 and would like to 'return' in Windows 7 to a windows 10.
  She recently bought a new computer:
  Black HP 15.6 "15-f209wm with Intel Celeron N2840 4 GB memory 500 GB (windows 10)

  And had me working on it to install it as a Windows 7.
  The problem that I didn't forsee is that after I installed wiondows 7 Nothing worked because all the installed drivers were too 'new' for the Windows 7 operating system at least that is what I think the problem is.

  The main thing that doesn't work is the USB ports and Wifi,
  and I cannot find drivers to make this 'connection', this 'bridge' of sorts between Windows 7 operating system and the hardware inside the computer.  And I can't find solutions on the net!

  An idea that I'm trying is to copy and paste drivers from another computer Windows 7 HP, on it. But I don't know if that's going to walk.

  I am really confused with this and need your expertise!
  
  We thank you in advance.

  * Note *.
  This computer has not been upgraded from a previous version of Windows.
  I tried the Driver Booster to see if it would be the auto scan, detect and install fix it but it didn't.
  I got the Lan/Ethernet is finally working.

  Hello:

  This driver installs usb, not the chipset driver controllers... (the last driver that I posted on my first answer).

  Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/25687/us B-3-0-Intel-USB-3-0-Driver-for-Intel-NUC6i-x-SY

  According to the specifications of product for your laptop, the USB driver above must have worked.

  If the usb driver 3 above fails to install the usb controller...

  Please view the the hardware ID for the USB controller requiring driver.

  To find the hardware ID, go the Device Manager and click on the usb controller requiring driver.

  Then click on the Details tab in the upper part of the window of the USB controller.

  Now you will see a drop-down list of property, and it will be set to the Description of the unit.

  On this list and select the 2nd (Hardware ID).

  After the first string of characters you see in the window.

• Enabling Wake-On-LAN?

  Hello

  Does anyone know how to enable Wake-On-LAN on a HP Pavilion Touchsmart Sleekbook 14-b141sa?

  I can't see it in the BIOS.

  Any help would be appreciated.

  Hello

  I also checked a few units, and I don't think that the options are available in the BIOS for you to enable

• HP Pavilion - 15 t-ab100 CTO: need help from Windows 7 drivers

  I was faced with a clean install of windows 7 on my laptop for 2 days now. I'm going to sleep after I post this so feel free to help others who are online, but if no one else needs help I have little material ID's which need pilots. I would be very grateful, because it is the last step, I need to finish my installation.
  
  Ethernet controller:
  
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C & REV_0A
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D31 & CC_118000
  PCI\VEN_8086 & DEV_9D31 & CC_1180
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C & REV_08
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_1903 & CC_118000
  PCI\VEN_8086 & DEV_1903 & CC_1180
  
  PCI device
  
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C & REV_01
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_522A & CC_FF0000
  PCI\VEN_10EC & DEV_522A & CC_FF00
  
  PCI memory controller
  
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D21 & CC_058000
  PCI\VEN_8086 & DEV_9D21 & CC_0580
  
  PCI simple communication controller
  
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D3A & CC_078000
  PCI\VEN_8086 & DEV_9D3A & CC_0780
  
  SM bus controller
  
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D23 & CC_0C0500
  PCI\VEN_8086 & DEV_9D23 & CC_0C05
  
  It is the last of the drivers I need. It was certainly a pain get here without any connectivity USB wireless drivers as well as figuring out how to attach the USB 3.0 drivers to my installer of windows 7, but it's in the past now. Thank you much in advance.

  Hello:

  You can use the W7 x 64 drivers and the software of this model to yours except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-ab000-notebook-PC-series/7771366/model/8542715

  The drivers you need for the ID you posted in the order that you posted the...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp71191.exe

  ICP data and acquisition and signal processing controller x 2:

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71185.exe

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp71189.exe

  PCI memory controller?  Don't know. Can be installed from below driver chipset.

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp71183.exe

  SM bus controller: Note: install first this driver and restart.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp73543.exe

• Need help with the installation of the drivers on the Satellite A100 - 215 PSAA9E

  Hey all

  I just reinstalled XP home on the satellite A100-215 (PSAA9E-02F00VPT) and I meet some real difficulties get the LAN, VGA and wireless drivers installed.
  Everything else works, but for some reason, these drivers are not what they are supposed to and I find myself in a bit of a tile?

  Someone at - he heard of these drivers being wrong before, if yes is there a solution out there?

  Really need help now as have been on it for a good few hours now and no not get anywhere fast?

  Thanks in advance

  Matt

  Can you give an exact describtion of the problem with drivers?
  So first of all, you can try to download the drivers again from the download page of Toshiba here:

  http://EU.computers.Toshiba-Europe.com

  And make sure that all windows updates are installed. SP2 is important to be installed for some devices.

• Satellite C660 - how to activate and use WAKE ON LAN?

  Hi all

  Previously, I posted asking about the use of Wake on Wireless LAN and was very helpfully informed that it was impossible, so I started to explore the Wake ON LAN option.

  I have a Toshiba C660 PSC0LE-00500JEN and helped Wake ON LAN in the BIOS and have connected a LAN cable between my router and the laptop, which recognize each other, if the cable looks ok.

  However, if I use an app to WAKE ON LAN on my android, or I use a site online "wake on lan via browser ', the laptop stay asleep.

  Can someone advise?

  Thank you

  James

  Hello

  Wake Up on Lan option would work if send you a magic packet to the remote machine (laptop).

  I have no experience using the Android app, who knows if it works properly

  Try the other method. For example, using software such as wake on Lan for Windows (GUI) graphical user Interface

  Google for it to download this software.

  In addition, go to the device-> LAN card Manager-> properties-> Advanced tab and check here if the WOL is activated too

• M3 short life battery for wake on LAN

  Is there a possibility to turn off the "Wake on LAN" in the bios on the network. The Toshiba software tool, I believe that hwsetup is not installed on computers.

  Hello

  Visit the download page to Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp choose your phone model and you will find the tools you need.

  Good bye