PowerConnect 5324 unable to upgrade

Similar Questions

• PowerConnect 5324 SFP Module

  Hello

  I have a PowerConnect 5324 and a "QLE2462 PCI Express 4 Gb FC Dual Channel".
  What modules I need to buy to make them talk to each other?

  The seats of switch on the server, so I'm sure I need a SX module.

  I have no knowledge on the FC so a deep answer really appreciated

  This will be my homelab so nothing of quality required

  Kind regards
  Andrzej

  Hello

  The switch supports modules 1000-SX and 1000-LX. Those aren't Fiber Ethernet, fiber channel storage. The 5324 does not support the Fibre Channel.

• PowerConnect 5324 default factory reset

  Hello

  I have a Dell PowerConnect 5324 and I need to reset it to factory settings.

  I am facing difficulties to connect the switch cable to the Console, the following has been done

  1. I tried 2 difrent console cables

  2 - I tried 2 difrent computers

  3 - I tried Hyperterminal & PuTTY

  4 tried default 9600, N, 8, 1 and many more combinations

  5 - made sure SCROLL LOCK is OFF

  The spectacle of hyperterminal connected but I can't figure anything...

  Double entry not funcion and I am not able to access the switch.

  How can I resolve this more? What should I do in this case?

  THX

  Hello

  Can you telnet to it? You can access the web GUI? If you can access the switch in a different way, you can reset to the factory settings by deleting the configuration of start and reloading. For the console, you need a null modem or crossover RS-232 cable.

• XPS 13 (9343) - unable to upgrade to Windows 10 - error 0xC1900101 0 x 30018

  I have a brand new 13 XPS, 9343 model with i7 processor and 512 GB SSD. I'm still within the period of 14 days, and I'm now seriously returning. I've never known such a load of nonsense trying to install any other piece of software.

  So far, and after many attempts, I was completely unable to upgrade to Windows 10. The first thing I did was to install all the Windows updates available for 8.1 (there were 79 of them), and immediately after that I started the saga to install Win10. Nothing else has been done to the laptop - no questionable software or USB devices (except the USB boot if necessary). It is in a State of cleanliness.

  -After the download via Windows Update, the installation procedure is INCREDIBLY slow (for example, it takes 36 HOURS to reach 42% completion - and at this point, it hits the error message). What the heck can he do?

  -J' also tried to create a bootable USB drive via the media creation tool. If I boot from the USB key and perform a "clean" installation, it works perfectly: it takes about 8 minutes total (which highlights how ridiculous the 36 hours). However, because it is a clean installation and not an 'upgrade', I find myself with a non-activated version of Windows 10 and I am asked to pay £99.99, I don't intend to do. I paid for the laptop on the understanding, he would get a FREE upgrade to Win10!

  -J' also tried using the USB key (but not the start of it) to perform the upgrade in place - this strikes the same mistake as Windows Update (and taking so long)

  -J' tried to uninstall all antivirus software, and disable all wireless/bluetooth devices before performing the upgrade - nothing of this aid. Because need me 36 HOURS per attempt, it is really not acceptable to try disabling things randomly in the vain hope that it might work correctly.

  When trying to upgrade (i.e. not), I hit an error message "Windows Setup cannot set up Windows on your hardware" or similar. During the recovery after the failure, tool configuration gives the 0xC1900101 error code 0 x 30018 and says it failed in operation 'FIRST_BOOT', the phase SYSPREP. Just make this error message cost me 36 hours of waiting (welcome to the future!), then it would be really helpful if someone could give me a definitive answer on what makes...

  Help, please! Auuughhh

  Hello world

  If you are affected by the issue in which your XPS 13 is not upgraded to Windows 10 and he is stuck or take several hours, PM me with your serial number.

  Thank you

• PowerConnect 5324: esoteric cabalistic

  Hello everybody,
  
  I got a Dell PowerConnect 5324 switch and I try to manage it.
  

  I connect it to a computer with a null modem cable and I run PuTTY 0.62. I set options to :
  

  • Connection: serial
  • Speed: 9600
  • Data bits: 8
  • Stop bits: 1
  • Parity: None
  • Flow control: no

  And then, I switch on the switch. I get this :
  

  Waow. I've tried to change the character set, but none give something readable.I still can type basic command : if I type enable, reload, y it seems to reboot.
  

  But I can't manage it because this display is unreadable.
  

  Any idea ?
  

  Thank you, it works! As I always do, I erase everything, then I rebuild.
  Because I want to do is slow, but sure, I write this script in notepad ++, then I copy a line and spent in PuTTY.
  I was tired of blindly typing my commandments and not be sure of the result...
  (of course the line beginning with # is a comment, and 'y' is just to validate the command reload)

  #Reset To Factory Settings enable delete startup-config copy running-config startup-config reload y#waiting
  
  #Configure IP Address enable config interface vlan 1 ip address 192.168.77.250 /24 exit ip default-gateway 192.168.77.1 exit copy running-config startup-config
  
  #Reload to make sure it saved properly reload y#waiting
  
  #Create a web UI user enable config username admin password admin level 15 exit copy running-config startup-config
  

  Then I ran to try to access to the web interface... yeah, victory !!!
  

  Thank you very much Dell Community for your support.
  

  Thank you Dell for your hardware, PuTTY & Notepad++ for your software...
  

• Unable to upgrade from Win98 to XP

  When one of my friends gave me an office with no hard drive, Windows XP upgrade CD and a hard drive that is not installed in the office.

  I installed the HARD drive in the desktop and install the new Windows 98 installation, it worked very well. When I tried to upgrade to Windows XP, it won't Cross and has a lot of compatibility problems. I installed the ASUS chipset and all the other drivers from the ASUS site before moving to XP.  He always stubborn won't let me update.

  I am unable to get the upgrade, and yet I am frustrating.  I wonder how can I "force" the HARD drive to accept the new update of Windows XP? Clones old HDD to new HARD drive work?

  The office is probably not OEM. It seems to me it's built pc. The motherboard is ASUS P4V8X-MX.  I kinda wish I could find commercial full Windows XP for under $ 20. :/

  Hi Deafbusta,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the issue you are facing problems with the upgrade from Windows 98 to Windows XP. I will certainly help you in this regard.

  I suggest you to refer to the help article and check if it helps.

  How to prepare to upgrade from Windows 98 or Windows Millennium Edition to Windows XP
  http://support.Microsoft.com/kb/316639

  How to install or upgrade to Windows XP
  http://support.Microsoft.com/kb/978307

  Taken Windows XP supported upgrade paths

  http://support.Microsoft.com/kb/292607

  Support for 98 was completed, refer to the article:

  Support for Windows 98

  http://support.Microsoft.com/W98

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Unable to upgrade Windows Vista to 7, error: implementation could not determine whether the BitLocker Drive encryption is in use.

  Original title: Upgrade Vista - 7 and issue of Bitlocker.

  I'm upgrading stops priocess Vista-32 to Windows 7 family 32-bit and upgrade when checking report of compatibility as a result of the error message following: "implementation could not determine if BitLocker Drive Encryption is in use.

  I have established that my Vista is not only encryption, so I can't turn it OFF... it's weird I had myself far enough in before upgrading... always new problems affecting it right back

  Hello

  I suggest you try the steps suggested by Andre Da Costa replied on March 27, 2010. From the following link:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Setup-was-unable-to-determine-if-BitLocker-Drive/7be7ac98-5e73-49e5-9636-179cf7b11b23

  See also: What is the difference between disabling BitLocker Drive encryption and decrypt the volume?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-the-difference-between-disabling-BitLocker-Drive-encryption-and-decrypting-the-volume

• Unable to upgrade to windows 7

  Hey! I tried to upgrade to Windows 7 Home premium to windows vista home premium.  The upgrade works fine until it transfers files and get the blue screen of death at around 60%.  My computer then restarts and goes back to vista.  I've seen issues with this similar issue but the solution was to obtain an updated version of 'Intel Matrix Storage Manager or the Intel Turbo Manager', I am unable to find these programs on my computer so I was curious to know if there is another solution?

  Your Q should be placed on the Group of Win7 and not here, a group of Vista

• vRealiza unable to upgrade Operations Manager

  Hello
  

  I have vRealize Operation Manager 6.0. I'm moving from 6.0 to 6.1.
  While installation time it shows since long time "5 of the 9 pre script preparation.
  
  As of now I don't get existing URL also, please give me the suggestion to solve this problem.
  
  Kind regards
  GV Ganesh

  Hello

  Finally I got the solution for this questions, "log/Storage/Log" partition used 100% vROPS because of who unable to continue improving.

  After clearing old newspaper on this partition, it will be upgraded successfully.

  Kind regards

  GV Ganesh

• Unable to upgrade

  For several months, HP Support Assistant required the installation of "Intel Chipset Installation Utility ICH9m for Vista", even if I upgraded to Windows 7.  Whenever I tried to install this 'upgrade' installation as having failed and the Support Assistant failed to allow the development of the system to continue.

  How to spend it?  My laptop (HP G60t-200) is three months out of warranty and HP won't talk to me unless I pay.

  GuyD

  Hello:

  You don't need the chipset for Vista driver.

  Use the W7 chipset driver update if you are on the link below. If it installs correctly you more than likely will not get this message over the Assistant for help.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-75795-1 & LC = on & DLC = in & CC = US & os = 4062 & Product = 3837660 & sw_lang=.

  Paul

• Unable to upgrade to Yosemite 10.10.5

  Currently I have OS X 10.9.5 and tried the update to OS X Yosemite 10.10.5 but after starting the upgrade process, I get a warning message: "this update requires OS X version 10.10." I looked to 10.10, but nothing helped. Any suggestion? I don't want to upgrade to El Capitan, I prefer Yosemite because of all the comments, pro & con, I've seen. Any suggestions would be greatly appreciated.

  Thank you!

  If you have previously obtained Yosemite from the Mac App Store, open a session in there with the same Apple ID and click the purchases tab. If this is not the case, go to a physical store of Apple and ask.

  (139732)

• Unable to upgrade the BIOS on my laptop satellite

  Hi all

  I downloaded the latest version of the bios of 32 bits Toshiba site, but not able to update

  Error - ROM is not enough.

  Also it need to upgrade the Bios after installing XP 32-bit

  OS - XP SP2

  Any ideas.

  AS

  Post edited by: AS18

  Sorry, but can you me tell why you need BIOS update?
  You have problems with your laptop?

  I don't know what model of laptop you have, but if not necessary do not change well running system.

• Unable to upgrade update OSX EL Capitan. See as uploaded into the store.

  I have downloaded the EL Capitan of OSX but kept during the upgrade.

  Now when I have one trying to give the Upgrade should downloaded and its disabled people and there is no option to trigger the upgrade.

  How to upgrade now.

  

  see if that helps - all

  https://discussions.Apple.com/thread/7361981

• HP Windows 7 unable to upgrade to Windows 10 laptop

  I trust HP for years since we got the first programmable HP hand-helds to JK Gill in 1976.

  To find out that HP laptop I paid a lot for in 2010 is going to be completely obsolete is too sad for words.  Is there SOLUTION No. at all for my computer?  It's a HP dv7-3060us Entertainment Notebook.  I bought with my money of colonization when I disabled for cancer.  It has been a lifeline so far but now it is going to be obsolete?  Is there nothing to do?  There is no way to upgrade to windows 10?  I happen to love windows 7 but I understand that it is a lost OS also.

  Someone at - it answers?

  Thank you very much

  SissyBeans

  @SissyBeans:

  It is often better to have a laptop computer running an OS more old where everything works, only faced with a new operating system where things are 'broken.  As long as it works OK for you, it is not "obsolete".

  The problem, that you are facing is that Microsoft provides only pilots with the most basic features and what you really need for these features in laptops is the specialized drivers written for the specific material found in laptops - and unfortunately, there is no HP Win10 laptop driver.  HP only guarantees the compatibility of Win10 for machines manufactured after August 2013. HP is not no matter what timetable indicating when, or IF, they will produce drivers for older machines.

  So that you CAN update to Win10, I would personally recommend against him.  I tried to update two portable Win7 on Win10 and upgrading two of them ransacked.  Construction machinery 5 years ago only were not with Win10 in mind.

  As for Win7 being a 'lost' BONE - if it is true that MS has ended mainstream support for Win7, MS don't end updates to security for your Windows 7 PC until January 14, 2020. So, there's lifes in Win7 for years to come.

  As for not having Win10, I was a beta tester for Windows products and was one of the first initiates Windows test Win10 - and over the years of this, I have never been also disappointed by the total lack of improvements I have with Win10.  Without new hardware and a touch screen, Win10 is a little more than Win8.2 - with a bunch of stuff that was moving and a new half-baked Start Menu, for which there are better alternative third-party.  He misses you very much.

• Unable to upgrade to Windows Vista Basic to Windows XP on hp pv6000

  Original title: upgrade

  upgrade vista basic to windows xp on hp pv6000 and my wireless is not wrking nor showing in my taskbar please help

  Hello

  Vista to XP is a downgrade!

  After installing XP, did you get XP drivers on HP website? See...

  http://WWW8.HP.com/UK/en/support-drivers.html

  .. .to locate your particular model, then download and install the XP drivers (if there no, no guarantee if your PC comes with Vista originally).

  I tried the model number you gave, but there are 41 possible matches, so I think that pv6000 is a "series" rather than a specific model number.

  Tricky