Poweredge 840 Server [MS]

Similar Questions

• Guasto PowerEdge 840 Server

  Salve ho server it in oggetto PowerEdge 840 all'improvviso TR e spento e che frontalmente lampeggia alternativamente he led verde di sinistra e giallo di destra (fermo provided che è anche a disco del raid da auswechseln perched no adapter).

  Provando a riaccenderlo, una volta spentosi, it server not riparte.

  The Unico modo per riavviarlo e dictionary it cavo di 10 secondi to e poi riconnettendolo TR production infectees side da solo.

  Dopo he riavvio remains acceso by worms 3-4 minuti dopo di che if rispegne e cosi via.

  Ho tried a dictionary he connector che alimenta he Bay degli hd sas con lo stesso risultato.

  Presumo che sia problema di alimentatore.

  Further quality test I can do visto che non ho tempo di entrare nelle did utility di sistema?

  di seguito del tag service server:

  Deer: 9GG7V2J

  Rimango in attesa di riscontro vostro.

  Saluti.

  Carlo Santelli

  Buongiorno, provi a rimuovere the e side a tenere premuto it looping di accensione premuto per 20 secondi. POI provi a riaccendere.

  is as ripresentarsi it frontal sul problema, rimuovendo it frontal pannellino, this sono dei numeri, nel caso quali if accendono?

• Dell PowerEdge 840

  I have a PowerEdge 840 Server with 2 SATA drives inserted.  Both are blank discs.  When I turn on the server, I finally get to a point where I get the message:

  BMC Setup "press."

  Strike F1 to Christine boot, F2 for Setup utility.

  I press F1 and I don't see anything unusual.  So I escape and he returned finally to the same place.

  Just before what the server was very good start.  One of the other server tech in our Church (we are a small organization with the support of volunteer) removed the SAS drives that have been configured in Raid 1 and replaced by SATA drives and he said that it reset the Configuration of SAS utility make it RAID 0.  I'm not familiar with the SAS 5 configuration utility so I don't know how to check if he did properly but it seems that this error now appears after doing the unusual changes.

  How can I solve this problem?

  Thank you v e

  I'm not sure that understand the problem... it does not start the operating system? With blank discs, it shouldn't, right? In addition, change the RAID configuration would mean that it should not. Sorry if I'm missing something, but it seems that the work is half done and the operating system must be reinstalled or a restored backup.

  Also, if it's not too late (looks like that's not), do not use RAID 0. Configure RAID 1 instead.

• PowerEdge 840 Dell diagnostics on HDD utilities, even on the cd?

  When the PowerEdge 840 Server starts, you can press F10 for "Mode Utility" which charge a diagnostic tool which seems to be a score of 57 pre-created MB. We also got the CD with the server, 'diagnosis and service systems","Drivers and utilities", etc.

  These CDs contain the same on that pre-installed diags utility on the hard drive? In other words, can I just wipe all of your hard drive and install linux instead, and when necessary, run the diagnostics from the CD? (although I suppose that by pressing F10 doesn't work then). Or should I keep this partition with utilities.

  There is also a 2.2 GB empty partition. Which is necessary as well? For example the utility from the 57 MB partition should the other 2.2 GB partition for temporary files, or something?

  Message edited by Rogier E 29/01/2008 06:47

  
  

• 5.4 OpenManage cannot initialize new disks PowerEdge 840

  I'm bored of Array Manager. I think Openmanage is a poor substitute.

  I have a new Dell PowerEdge 840 Server with two disks SAS and SAS 5i/R controller of berries in a mirror Raid-1 (made in hardware)

  I have installed OpenManage 5.4 WITH the storage option.

  I put two new hard drives SAS I want to initialize and create another virtual disk of Raid-1.

  OpenManage sees the drives (loans and OK but not online) and gives me two options under tasks "Blink" and "Unblink.

  Now when I put two drives in my component Snap Server PowerEdge 1600SC Array Manager 3.6 MMC 3 years, I could create a virtual disk from the operating system.

  What happens with Array Manager. Why he let do this to me?

  What is going on? Why can't initialize new disks and create a virtual disk?

  It comes to my main server. I can't take it offline for 10 hours initialize disks.

  I went into Windows disk management and that he sees the drives but I don't want a Software Raid.

  Thank you

  Lara

  
  

• PowerEdge 840 [CF]

  Buongiorno, it ns Server Business Dell PowerEdge 840 if no e production continued a lampeggiare di arancione, cosa dobbiamo fare? e' urgent! Grazie! Elena

  Buongiorno, the sto contattando by mail

• PowerEdge 840: USB keyboard and mouse not working not.

  Hello everyone.

  Yesterday, I pursached a used Dell Poweredge 840 to function as a backup server, I'm having a few problems with it but I can't understand.

  I installed the server with Windows Server 2003 x 86 edition and downloaded the drivers on the Dell site. It works perfectly, except for one problem:

  USB keyboards and mouse refuse to work.

  PS/2 works fine however, but any USB keyboard or mouse will not work.

  Flash USB drives read very well, therefore I used to recover some files on the machine before, but it was connected to the network, USB keyboard and mouse do not work.

  They are not recognized at startup and do not allow to enter the setup of the BIOS after Windows has started, that they are not always recognized. Windows displays the device as unknown device.

  I tried to boot from a live CD of 14.04 Lubuntu, in which the USB keyboard and mouse do not work either. Only PS/2 wants to work.

  I have tried different types of USB mouse:

  • Microsoft mouse
  • Acer OEM mouse
  • Mouse laser Logitech M-U0007

  None of them could work, although they work fine on my laptop, the main file server which is a model of HP and Dell Optiplex desktop computer.

  I tried a few different USB keyboards as well, but they refuse to work.

  I ended up borrowing a pair of keyboard and mouse PS/2 to configure the server, but I want it to work with my USB keyboard and mouse.

  Just for the record: the USB flash drives do not work very well, it's just the keyboard and mouse is not working.

  Anyone know how I can get there?

  Thanks in advance,

  Dominique

  Hello.

  Unplug all devices connected to the USB and PS/2 ports. Unplug the AC power cable, wait about 1 minute and then press in and hold the button for about 15 seconds. Reconnect the power and power on the server. Connect the keyboard and mouse to the USB ports and try again.

• Can I load windows vista or 7 on this PowerEdge 840?

  Hey guys, first time, coming through a device like this. PowerEdge 840

  Serial number: Service tag removed by privacy policy > | Express service code: abducted by the Express service code privacy policy >

  I read the manual, but still confused, can I load win7 on this machine? It can work as any ordinary windows machine?

  So I went into the boot options and selected the dvd as the first player, but it just goes straight to windows server 2003. Something up with this device in any case, whenever I have manually close it restarts and the fan is very noisy? Is this way, it is supposed to work, or it is supposed to be silent?

  There is 3x73GB readers in this machine and there is 2 pci cards connected to a smal circuit located at the rear of the 3 HARD drive, what can I do here in order to bypass this RAID system to connect a HARD drive to load windows OS please?

  The connector on the disks look like regular SATA connectors but the description on the Maxtor disk reads:

  ATLAS 10K V, 3.5 SERIES

  73 GB Serial Attached SCSI

  They are not SATA disks? If not and I can use a SATA drive, do I have to remove 3 disks and place a SATA drive in one of the slots?

  herbertsherpa

  I read the manual, but still confused, can I load win7 on this machine? It can work as any ordinary windows machine?

  You might be able to install Windows 7, but NO server has been tested and validated to run no matter WHAT client operating system. They are tested and developed for the server operating system. That said, it doesn't mean it won't work, but you will need to use the drivers 2008R2.

  herbertsherpa

  So I went into the boot options and selected the dvd as the first player, but it just goes straight to windows server 2003. Something up with this device in any case, whenever I have manually close it restarts and the fan is very noisy? Is this way, it is supposed to work, or it is supposed to be silent?

  Servers are not supposed to be quiet, but as part of the POST, the fans turn loudly when first energized. If they do not ramp down to a 'normal' speed, there may be a problem with the fans, sensors or environment (or the lid can be turned off).

  Make sure there is a check mark next to the DVD drive... means it is enabled. Also, how did you create your Windows media?

  herbertsherpa

  There is 3x73GB readers in this machine and there is 2 pci cards connected to a smal circuit located at the rear of the 3 HARD drive, what can I do here in order to bypass this RAID system to connect a HARD drive to load windows OS please?

  You can install Windows with a RAID System... you just need drivers. What model of controller RAID do you have?

  herbertsherpa

  The connector on the disks look like regular SATA connectors but the description on the Maxtor disk reads:

  ATLAS 10K V, 3.5 SERIES

  73 GB Serial Attached SCSI

  They are not SATA disks? If not and I can use a SATA drive, do I have to remove 3 disks and place a SATA drive in one of the slots?

  SAS (Serial Attached SCSI) are not the SATA drives, but SAS controllers/cables/funds of basket are 'retro' - compatible with SATA. You CAN put SATA drives out there, but it won't change anything. Windows will treat it the same. Windows only communicates with the controller, not directly with the player.

• Request urgent di assistenza PowerEdge 840 [MS]

  Request urgent di assistenza PowerEdge 840

  Urgent in quanto if non abbiamo UN serverpoweredge 840 sul quale in vorremmo vostra assistenza Salvo production more...

  The luce arancione lampeggia al centro, con to display it I brought ABCD, pero e spento not everyday altre directions...

  The ha 3 brain in RAID macchina con vs controller proprietario. soluzione servirebbe by riaccenderla o cash i dati contenuti nei brain.

  Grazie attendiamo riscontro quanto prima... the bloccata e attivtà!

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  -Service tag del Server

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• PowerEdge 840 perc5 / I firmware update

  Hello:

  I am refurbishing a PowerEdge 840.  I have the latest version of OpenManage software and under STORAGE\PERC 5 / I adapter (PCI Sot 1) version \Firmaware/Driver If get the error firmware is out of date:

  This is info from the OpenManage:

  Firmware version	5.2.1 - 0066
  Minimum required Firmware version	5.2.2 - 0072
  Driver version	5.02.121.64
  Version of the Storport driver	6.2.9200.16813

  I'm under SERVER 2012 (not R2) Standard that is not a supported operating system, but this should not prevent me to find and load the right FIRMWARE for this device.  I can't find anywhere.  Can someone help me find the firmware to download and install for this device?

  Additional INF:

  BIOS A8 2009

  Controller BMC 1.83

  SLOT_1 PERC 5 / i adapter 8 x or 8 x
  [Not occupied] SLOT_2 1 x or x 1
  SLOT_3 [not occupied] 64-bit
  SLOT_4 [not occupied] 64-bit
  SLOT_5 [not occupied] 32-bit
  Embedded N10/ICH 7 family USB UHCI controller 1 # n/a
  Embedded Broadcom BCM5721 Gigabit Ethernet PCI Express s/o
  82801G (ICH7 Family) n/a integrated IDE controller
  Embedded s/o adapter Radeon graphics card

  Name of Dell OpenManage Server Administrator
  Version 6.5.0
  Description systems management software
  Contains the common storage Module 3.5.0
  Data Engine 5.9.5
  5.9.5 material Application programming interface
  Instrumentation Service 5.9.5
  Service Instrumentation 6.5.0 integration layer
  OpenManage Inventory Collector 6.5.0
  Remote Access Controller 4 4.6.6 data population
  Secure port Server 6.5.0
  The Common Framework 6.5.0 server administrator
  The 6.5.0 server administrator core files
  3.5.0 storage management
  Sun Java Runtime Environment 1.6.21

  Thank you

  Hello

  It is listed on the driver page for the 840 under the section RAID SAS:

  http://www.Dell.com/support/home/us/en/19/product-support/product/PowerEdge-840/drivers

  Here is a direct link to the download page:

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=10DNJ

  The Windows version of the file will be held probably in 2012, but if you have any questions you will need to create a bootable media BACK and use the hard drive of the updater version. The Setup instructions for each version are listed on this page.

  Thank you

• PowerEdge 1900 and Poweredge 840 and NO hardware RAID SATA HD, FreeNAS with ZFS

  I searched these forums and the web in general a concise my questions answer, but nothing is done.  I just happen to find someone who is using 'old' technology and it retarget as much as you might think (I am a broke student by the way).

  I bought a Poweredge 1900 Server & server Poweredge 840 ebay about last year.  I've been busy and have yet to work with these two units.  I wanted to use the PE 1900 as a file server and then push a backup of these files on the server off site, the PE840.  I intended to buy four 1 TB or four disks SATA 2 to (WD Black or RED WD) for each system, respectively.

  I've been through a few videos on youtube the other day and discovered FreeNAS.  This seems to be a much better solution than the use of Ubuntu Server, but it also made me think about the hardware Raid with these systems.  If FreeNAS uses ZFS (software raid controller), you want to avoid a hardware raid controller.

  My current assumptions, please correct me if I'm wrong on any of the following:

  I think that each of these systems to support drives up to 2 TB?, I think that I can use the SATA drives and not SAS, four discs in each system drives.

  I believe that I can boot from USB flash drive (a quick, which I intend to install FreeNAS on which they recommend)

  I think I can connect readers to the Perc/Raid Controller controller (& just turn 'off' RAID), or simply directly on the motherboard.  (What woud be the advantages/disadvantages of the use of the card or simply by using the Council)

  I intend on working with what I have right now (cheap and available), then once I get this configuration work that I take it out of the sand/lab sandbox, upgrade the processors and ram up my budget will allow and go live with the installation program (if it is still possible)

  From now on, they are sitting in a corner, begging to consume energy, and fans of polute the soundscape with their cries (PE1900 precisely).  I know that I could pursue other options but I already these two units.

  I really want to utilze FreeNAS its serving capacity file and ZFS for its reliability.  Is it possible with this camera?, or should I junk them and move on?

  Thank you for your answer!

  I've done some research more and since FreeNAS is built off of FreeBSD supported hardware is the same.  I couldn't find a list for FreeNAS specifically so I looked to FreeBSD.  I was still confused about the material and decided to go forward with the poweredge 840, for two reaasons, there already 8 GB of ram and it is not as heavy to move on (from 1900). I shoot the raid controller (for simplicity) and I plugged in three 250 GB SATA drives and a 40 GB SSD.  I had to set the bios for the usb key is recognized and also due to adapt to be considered as a hard drive, then had to define the sequence of boot to the usb drive, acting as a hard drive.  Once all that has been said and done, I wrote my FreeNAS image on my USB and booted up.

  It took maybe 10 minutes and I was up and running (once I had configured the hardware and bios), I created a RaidZ (as proposed FreeNAS) and with my three 250 GB drives, it produced 453 GB of usable disk space.  The 40 GB SSD is used as L2ARC (from my cache of understanding), I tried the installer with and without the 40 GB SSD.  The difference was impressive, just opening the photos or streaming video on my laptop Win 8.1 (Dell 17r) is almost flawless, as if the files were stored locally.

  I was impressed by how quick and easy to use FreeNAS, simple and fast network shares can be configured with permissions that works quite simply not in less than 5 minutes.  I don't have Windows Server down, but generally configuration active directory takes a little more effort.

  I am satisfied for the moment and continues to experiment with the Poweredge 840 until I commit to a processor upgrade.  Once I acquire 16 GB memory for my Poweredge 1900 I will perform with her, as it has only 1 GB now, crazy.

  Thank you for your help.

• VMWare ESXi on Dell PowerEdge 840

  I am installing VMWare ESXI on a Dell PowerEdge 840 and it gives the following error message: "the operation of Installation Failed! Cannot find a device of maintenance to write the VMware ESX Server 3i 3.5.0 images. "There are two hard drives and no other than the controller onboard SATA controller.  Any thoughts?

  The VI client is free to install and there is no component license.  If you go to http://ESXi_ip/ , you will see a link to download.   Your ESXi host, it will be 60 days eval mode and you can go to Configuration-licensed proposes to add the serial number that you should have received your registration for free download.

• PowerEdge T105 server with SAS HBA PCI card compatibility model UCS - 70

  Hello

  We have a PowerEdge T105 server and want to connect Dell LTO-6 SAS Tape drive to this server.

  There are available PCI slots... but I wanted to know if this server can host this HBA card?

  Thank you

  Hello Suren24,

  Here is a link to the map you need to connect the drive LTO6 to. Accessories.us.Dell.com/.../ProductDetail.aspx

  Please let us know if you have any other questions.

• Assistenza PowerEdge 840 [MS]

  It our PowerEdge 840 TR starts con una schermata nera, che presumo it disco message SAS sia danneggiato. Allégo foto dei computer codes. Aspect info per una assistenza. Al più presto, Saluti NewPrint.

  SE vuole procedere autonomamente a una diagnostica, Può download tool which he diagnoses online

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=V6NJ3&FILEID=3084844446&osCode=WNET&ProductCode=PowerEdge-840&LanguageCode=en&CategoryID=di

  E that the Guide by the use

  http://www.Dell.com/downloads/global/power/ps1q06-20050259-Thathireddy.PDF

• A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  I can't believe it.

  When I start up a virtual computer, it gives a wrong message shown in the picture below.

  Does anyone have any ideas on this?

  Usually not enabled virtualization technology in host BIOS.

  Take a look at can not power on a 64-bit Windows VM