Unknown channel or name of the repeated feature - settings MAX IVI

Similar Questions

• Mobile data does not and the name of the Access Point settings are not available

  I don't have a mobile data, not even the small up and down arrows or letters beside the sims signal bars appear.

  I tried all the troubleshooting settings and different type of network, the airplane mode is off, mobile data are no limit, no power save modes are on. Phone is dual sim so I tried on the two sims and tried to disable the other sim and changing the sim slots, both sims are loaded with a credit of data that works in other android devices. WiFi works fine. Factory reset does not help.

  There is that one thing that I can't not try troubleshooting. When I select settings > more > mobile networks > access point names, it says

  "Access Point name settings are not available for this user.

  Maybe if I could put APN I could get mobile data. How can I do or how I can try to get mobile data to work?

  Phone's Xperia M4 Aqua E2363 with build 26.1.B.2.102 thanks if you can help

  This text is a bit misleading, which is something that I have forwarded internally as your comments.

  If you have no NPP stored the phone displays the text "the name of the Access Point settings are not available for this user" even if you use the owner account and have access to the settings.

  Try to download the automatic settings from settings-> more-> Internet settings and see if that helps.

• Trace channels by name without the help of a script.

  Hello

  I'm looking to draw channels, by using a report model, without having to rely on the index of each channel. I am processing the data from different sources and although they have the same marking convention for certain types of channels, some sources generate unique channels that can shake the index, and I have to manually put the parcels on the right channels.

  Is there a way around this without the use of scripts?

  Thanks for any help.

  Kevin

  I think that you can configure your report models as they reference channels by name, as opposed to the number.

  I have not used but check it out

  Or try this

  On the report tab, go to settings > Layout Set Up > layout settings and I believe that you change the channel reference it as well

  

• How can I change my name in the e-mail settings?

  I have a flame 2.2.0.0 running and in the e-mail settings, my name is misspelled. I can't understand how to change it. When I look at the settings, I can activate "Show notification for new messages" or turn off, I can "Tap to change" my signature. But I see no way to change my name. I tried a prolonged pressure, no dice.

  I have to start all over again?

  FWIW, that doesn't seem to be the case. My misspelled name certainly appears in outgoing messages.

  So... Yes. I have to start over.

  It is a documented bug: https://bugzilla.mozilla.org/show_bug.cgi?id=1122884#c1

• User name for the e-mail settings blackBerry Smartphones

  I forgot the user name I need to access the e-mail settings, I have the password but not the username. I tried all possible user names, I would have given, but none of them works.

  What is the format of the username? It of just a username like "James31" or is it like "[email protected]".

  Can be completely different from your address of Mali? for example email address could be '[email protected]', then the user name should be 'x' or can be like "xdfak"?

  Thank you!

  It doesn't have to be your email address.

  It can be simply "joesmith" or jsmith and does not necessarily match your blackberry.net email address. It may, but is not necessary.

• Unknown channel or the repeated feature N6700 name

  I use the driver of the IVI - C for N6700 feed (http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=7695). I'm using LabWindows / CVI to create a DLL and TestStand controll it. I've successfully used this driver to initialize, food, values of collating, turn off, then close. However, I am having intermittent problems revolving around the error "name of unknown feature repeated or channels." It occurs randomly on any function call.

  I have attached some of the files that I'm using as a reference.

  Any ideas?

  What happens, in ICB, me is that it converts the char in an integer, is added and converted a tank. So in decimal, '1' = 49, "2" = 50. That's how I came up with what I did there.

  The problem with the formatting of an integer in a tank is the function isn't looking for a tank, he's looking for an array of characters... that is a poor team to string.

  I tried a few diffferent solutions but I get no chance as much as to convert the whole of the chain. A single method, I realized that I still think that should work the following

  Bruno * slotName [1];

  FMT (slotName, "%d", slotNumber);

  But this does not work either, it gives me an error message indicating that it is looking for a ViConstString. This makes me think that I can't pass this parameter in as a variable, the part 'const' yells constant only. If my work just around is going to be to a case statement that resembles the slotNumber int, then hardcodes the '1', '2', '3' or '4 '.

  Thanks for the help.

• What is the name of the application Panel settings file?

  I updated my firefox browser. When I did he changed the settings in the control panel of my application. Now, I can't get firefox to automatically save zip, rar, package or other files that have been defined in the application panel until I did the update.

  I guess I need to know what file copy of the former data firefox folder, to reset these types of files to record automatically in my download folder.

  I hope you can help me,
  Bouazza

  Looking for mimeTypes.rdf in your old Firefox data file. This file is actually a text file to XML format, so you could, with some difficulty, open it in a text editor (or a tab in Firefox) and search through it for ideas on what he is missing, if not actually want to swap in the file.

• The name of the library in the General preferences are the same as the name of the device on the iPod touch?

  The library name in general preferences in I Tunes be the same as the name of the device in settings > on > on iPod touch 5?

  Hi chaz80,

  You can name the default iTunes library all you want.  Most people use their name, for example "library Chaz" not the name of their device.  It is common to name a playlist "Chaz iPod touch 5" and put just the songs you want to sync to your iPod touch in the playlist.  How do you organize things is completely up to you.    The resources below will explain more in detail:

  11 iTunes for Windows: using multiple iTunes libraries

  Enjoy!

• Unknown channel or feature name repeated

  Hello

  I want to connect NI SMU-5451(waveform generator) and NI-SMU-7966R(Flex RIO) with peer-to-peer technology. I took an example of NOR-FGEN, which works perfectly, but when I use it in my project there is a mistake takes place - the "unknown channel or feature name repeated" What should I do to fix this?

  Hello

  I saw this post in another place, and there was a proposal to reorganize the properties in your node as well as "Active Channel" is the first.  As mentioned on this post, property nodes run top down and you may need to specify the channel before enabling the peer to peer.  Did you get a chance to try this yet?  You still see the same error?

• iTunes could not copy (name of the song) to the iPod (ipod name) because an unknown error occurred (-50)

  Hello
  I use the latest version of iTunes and 160 GB iPod Classic. I create playlist and drag and drop the files there, he begins to synchronize the songs (update files to iPod, copy) but after a few songs, it gives me this error:
  iTunes could not copy (name of the song) to the iPod (ipod name) because an unknown error occurred (-50)
  After clicking 'ok' on the error message, it shows that the iPod got synced up that song (for example songs 2456) but when I try to delete, for example, each piece in the last playlist so I can send all has couse again once I know not where is the last song, it freezes. I can't even click on safely remove the lower right, it does nothing. When I unplug the iPod and reconnect, it shows that the iPod memory is for example 10 gb full couse songs that got synced up to the error, but it shows them as "other". If I wait a few minutes, it automatically deletes and it for example shows 900 MB is full with others. If I wait for each selection to sync, which always occurs within a song at random, but the rest of the songs that I've waited sync appears as usual. But if I try to send new songs, the same error apears after 3-10 songs constantly. But after that I get the error again, the same thing happens in the freezing point. If I restore the iPod and you try to send the songs again he again Gets a thousands of songs, the process repeats...
  I restored my iPod, I did on this topic of error checking. I use no bitrate convertion. Yes, I tried sending the same files after restoring the iPod, no error. Any ideas?
  Thank you!

  I just use CopyTrans Manager to it. Everything went well.

• Why the file name of the file as an attachment with Annotations "attach a file" (trombone) become unknown when the observations are published?

  Our company recently purchased Adobe Acrobat Pro XI intended to be used for shared electronic reviews.  We use the send for shared review in Adobe Acrobat Pro XI, and all the comment tools work as expectedexcept the trombone in Annotations.

  When a Word or Excel or Image (png, jpeg) file is attached using the trombone of Annotations, the initiator may initially see and open. But once feedback is enabled and the review file is closed, the file 'Name' becomes 'Unknown' (even if the Description is the correct file name and extension).  Change information are unknown, such as size and compressed size.

  When the control file is then reopened, even the initiator cannot open the file, although:

  • The location of the file is marked with the paper clip in the document.
  • The file name is displayed in the list of comments with the name of the initiator.
  • In the list of attachments (the paper clip under the thumbnails and bookmarks), the name appears as unknown, shows the file name Description, update is unknown, the size is unknown and compressed size is unknown.

  
  

  The file name cannot be published, although the Description file can be.

  We have followed the procedure described in the tutorials but may not know how to resolve this situation.  As this feature was the reason for the purchase of Adobe Acrobat Pro IX, we would any help. Please leave out the basics because we are new users.

  We have several people with Adobe Acrobat Pro XI and the rest have Adobe Reader XI is a Windows platform.  Can someone please give us some advice how to get this function runs as described?

  The bug is fixed in the latest Adobe Acrobat Pro XI 11.0.09 update (update: in Acrobat Pro, go to help-> Check for Updates...).

  -Rohit Sharma

• Difference between the name of the channel & Pulse Terminal (NI USB-6212)

  I have a box OR USB - 6212 & on the pinout data sheet, it is said that the FREQ OUT default PIN is 40 & the signal name is PFI14.

  I am trying to generate a pulse by FREQ OUT in c# & DAQmx by calling channel name "dev2/freqout". When I ran the program & attempted to verify the measurement using a multimeter, I don't have a reading of the PFI 14, but 6 PFI. When I tried to set the name of the channel for "Dev2/freqout", the pulse filled Terminal automatically textboox with control unit using the test panels & "/ Dev2/PFI6. When I started the program, I got multimeter reading out of the Terminal impulse.

  Can someone please explain to me about this behavior?

  Also if I want to write a program to read the pulses generated by FREQ OUT, should I wire PFI 14 to some CBC CTR or PFI6 to CTR CBC?

  No explanations and answers are very aprpeciated.

  Thank you

  Hi Kasrus,

  Thank you for that bring to our attention. I will study this question that you may have found an error in our documentation. My recommendation would be to use the PIN that works for you.

  Thanks again for us help to continuously improve!

  -------

  Aaron F.

  National Instruments

• How do you find the name of the Group and channel your TDMS file name?

  How do you find the name of the Group and channel your TDMS file name?

  Nevermind, I've used the file viewer.

• Best way to pass the name of the e/s DAQmx channel Veristand 2011 Custom Device?

  I'm building a custom device that will run a DAQmx task on the target of RT.

  I use VS2011 and alsoSimple custom device tool, which, at this point I'm not sure if it can work under VS2011...

  I created the fine libraries and custom device (a PWM input called InputPWM) has added to the Explorer from the system.  Running it returns the following error when I deploy:

  -----------

  LabVIEW: Type VI reference is not part of connector of VI.
  =========================
  NEITHER VeriStand: Open VI reference in Custom Devices Storage.lvlib-> pen device reference (Interface HW) .vi-> Custom Devices Storage.lvlib:Initialize Device (Interface HW) .vi OR VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi-> NI VeriStand Engine.lvlib:VeriStand Machine.vi engine-> Engine.vi NI VeriStand Engine.lvlib:VeriStand-> NI VeriStand Engine.lvlib:VeriStand .vi engine Wrapper (RT)
  c:\NI-rt\VeriStand\Custom Devices\InputPWM\InputPWM Engine.llb\InputPWM RT pilot VI.vi

  ----------------------

  On the console, it says that the error is 1026, LabVIEW: Refernece VI is not valid.

  I suspect that a potential problem is that I used a DAQmx e/s in the Configuration.ctl and the InputPWM RT pilot VI.vi in the framework can not deal with this type. So my questions:

  -What is the easiest way to pass the names of e/s to the custom device? For a quick test, I could go to hard code, but a more generic solution would also. Should be based on the address for the e/s MAX? Do I have to create the ctr under the DAQ hardware in VS?

  - or said by the way, is there a way to review these screw frame to see where the questions is, as you would with LV - RT?

  THX.

  L.

  If you use the tool of easy custom device, just put everything you need inside the cluster configuration data and these data will be in the home page of the custom (for the user to set) device and be available at runtime in the RT device custom code.

  You could have them type the name of the DAQ card and have an array of names for the channels to use. You then create the task running. or something like that. You like.

• Clear explanation of the name of the channel on IVI Drivers

  Hello

  I'm using Labview 8.0 assessment to write a program which will include a 35 - 5 p Xantrex XDL DC Power Supply to automate a test. It has only one exit.

  I installed the drivers XDL and IVI Compliance Package. However, I'm still struggling with the name of 'channel' on the IVI Drivers.

  Can someone please clearly explain to me what is the name of the channel, why do I need and what I need to put my name to the channel to get my program to work?

  Thank you!

  Yes, I've read this discussion, but it does exactly what a channel name was, as I had an output "channel".

  I went back to my program just to give it a shot, I typed in the name of the channel in a digital 1 and it worked.

  I still don't know what it is, but at least it will communicate now.