Workstation HP z210 powersupply problem

Similar Questions

• HP Z200: Z200 Workstation processor Upgrade - having problems

  Hello

  I have a workstation Z200 has been great without any problem. It currently has the i5-660 processor installed.  A week ago, I ordered a processor Xeon X 3470 online... Which is one of the processors tested and compatible with the Z200.

  Told that the processor has been tested by a working machine and no problem.

  Received today the processor.

  So I turned off the machine, unplugged everything. Removed the old processor. Clean the radiator with the thermal compound remover. Assured that the head of the processor was impeccable.  Inspect all connection on the processor and the power outlet.  Everything checked out great.  Installed the processor, apply the thermal paste. Installed the heatsink.

  Plug everything back in and press the power button... Power led goes blue for 2 seconds... Then turns red and blurts out 5 beeps in 1 second burst. Then start again...

  I tried swapping and relocation of the ram, the same question.  I removed the video card and used the edge. same question. I turned off the unit, pulled out all the ram left it unplugged for some time, reset the cmos. Returned later plugged it all back in and still beeps.

  Tried to put in place the processor and still beeps...

  I took out the processor, new installed the old and runs like a champ!

  Any ideas on what could be the problem?

  Given that you were the only kind enough to respond.  I wanted to return my staus update for you...

  I returned this processor...

  I bought a new one and the system boots without problem!

  Same CPU type and age and no problem!

  I have messaged the seller of the business of first transformation on the back. He reported that the processor did not work for him as well...

  The Xeon I upgraded just runs circles around the i5 in what I got here!  The machine is so much faster in the games and the process!  I'm a fan of Xeon now!

  So if you ever see someone point out simliar like my past issues... Hopfully, this helps you!

• VMware Workstation with ESX3.5u4 - problems with the virtual machines within ESX3.5u4

  Hello world

  I really need a consultation on this one:

  I'm testing ESX3.5.

  As I don't want to buy any material for now I thought it would be a good idea to test ESX3.5 in my computer.

  I used this model to install ESX3.5 in my computer: http://xtravirt.com/node/100

  ESX3.5 works perfektly in workstation.

  The only problem is that if I create a computer virtual within the VM ESX3.5 works very very slow.

  I searched on the VMware Forum for this problem and found that you need Intel VT enabled to speed things up.

  But I think that my "Intel (r) Core (TM) 2 Quad CPU Q9300 @ 2.50 GHz, 2000 MHz" should have Intel VT.

  Does anyone have any ideas why my VMs on esx3.5 within the short slow workstation?

  Thank you all in advance for the help!

  Material used:

  ASUS P5B

  Intel Quad Core Q9300

  3 GB RAM

  Intel PRO/100 S-Serveradapter Ethernet

  According to your log file, the external VM using VT - x.  I'm afraid, it's as fast as your nested VMS are going to get.  While I would qualify as slow or even nested VM performance very slow, I'm not sure I'd go so far as "very very slow."  It is perhaps a matter of perception.

• Workstation 10 unattened installation problem

  Hello

  I'm trying to install 10 Workstation on positions with MDT on the Windows 7 SP1 EN with the following command line:

  VMware-Workstation-plein-10.0.1-1379776.exe/s/nsr/v ' EULAS_AGREED = '1' = 'ALL' DISABLE_AUTORUN ADDLOCAL = "0" QUICKLAUNCH_SHORTCUT = "0"

  A newspaper there is this error

  

  and second journal of in the

  

  If anyone can help me thanks.

  By running aid of the executable VMware-Workstation - fullxxxxxxx.exe /? I have replace argument/v by /msi_args and here a miracle it works.

• Problem with VMWare Workstation combo, .vhd virtual drives and physical disks in the sector of size 4K?

  All,

  I suspect something wrong with some of my virtual machines.  I have been using these virtual machines for a while, and I see some weird behaviour recently.

  I see a lot of corruption in the virtual hard disk (.vhd based).  CHKDSK automatically gets performed many large files such as Oracle datafiles get damaged etc...  It all seems quite random and inconsistent, but I am using .vhd virtual machines in VMWare Workstation for years without problem.  This problem is new, and hard drives are basically unstable.

  I * think * (and I'm totally off base) that is perhaps the issue with my new external hard drives.  These discs have a 4 KB sector size, without e512.  Thanks to this architecture of hard drive, don't mount not the tools of Microsoft or manupulate .vhd files on these disks.  The questions seem to go away if I switch to vmdk or switch to the physical hard disk size-one-sector 512kb.  Because errors are not compliant, that I don't really have a way to document/prove that is the case, but it seems to be.

  I use version 9.0.0 on Windows 7 Workstation, and the guest is Windows Server 2008R2.

  My question is:

  (1) what meaning?

  (2) how I prove/document, since it is a contradiction?

  (3) is this a known problem?

  (Btw, switching HDD's vmdk is not an option in our case due to an obscure legal agreement with Microsoft.  I have to distribute my VMs in vhd format, even if they are designed to run on VMWare...)

  -> Adam

  These discs have a 4 KB sector size, without e512.

  (I've highlighted "without e512" in "BOLD" to key in my answer to the host operating system.)

  -L'OS is Windows 7 Enterprise

  According to the political support for the 4 K sector hard drives in Windows, Windows 7 does not support the native 4 K (logical 4 k sector size) but it does not support Advanced Format or 512th (size of logical sector physical and 512 bytes of 4 K) and that is can be the question.

• RDP problem :)

  Like most RDP problems, this one is very interesting.

  I have a Server Windows 2008 R2 have no problem RDPing to.  It is functional for 2 years...

  Come to find someone I work with is unable to RDP to it.  Clearly, there seems to be a problem on his workstation, but I am unable to find a rhyme or reason.

  Facts:

  Problem workstation, win 7, can RDP to any other server in the environment.

  Workstation problem using the latest version of the RDP client.

  I can RDP to the workstation server problem (another sense) issue.

  I created a new profile on the position of the problem and tried to RDP without credentials saved... didn't work.

  Any profile on the position of the problem that I use, I can always telnet to the server on 3389

  Yes, it's listening on 3389 since I can get it from other machines

  I am unable to find a log file referring to any kind of problem (not really how to for debugging)

  While I'm trying to connect, do a netstat - ano shows a connection on the workstation to the server problem

  I ping the server by name and the ip address of the workstation problem

  I'll probably make a capture of packets at both ends, the problem is the server is the production and work station is heavily used throughout the day.

  any ideas?

  Hello

  Depending on your answer, your computer is connected to a domain network that includes various policies that govern your system and can affect the basic operation of a stand-alone system. So, I suggest you to republish your query on the TechNet forum for best expertise on this issue.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  All the best!

• 6u2 ESXi host nested on VMware Workstation for Linux referee v12

  Hello all, I have

  I have a lab environment virtual running in VMware Workstation for Linux v12, and my ESXi hosts do not work correctly on one of the virtual networks. All my troubleshooting suggests a problem with nested ESXi hosts that may be a bug, but I want to assure you that I did everything properly first. That's why I post here with the hope that if I made a mistake that maybe someone else can point out he me.

  Physical system

  8 core Intel Xeon 2.1 GHz CPU

  128 GB of RAM

  OS - kernel Linux 64 - bit w/3.19.0-32-generic Linux Mint 17.3 (fully updated from this announcement)

  VMware Workstation 12 Pro - 12.1.1. Build-3770994 (fully updated from this announcement)

  Nested ESXi host VM

  ESXi v6.0.0 (Build 3825889, completely updated from this announcement)

  4 cards 'physical' (only 3 used for now)

  -all use the e1000 NIC hardware virtual, but also tried vmxnet3 NIC with no difference

  -vSwitch0 use vmnic0 & 1 vmnet16 of virtual network in a pair of active / standby

  -vSwitch1 uses vmnic2 on network virtual vmnet18

  -vmk0 used for management on vSwitch0 and vmk1 for iSCSI on vSwitch1

  -"Promiscuous" mode and forged passes enabled on all Port vSwitch groups (activating or turning off these features makes no difference)

  Test performed until now

  I checked that all the IP addresses and network masks used are correct.

  With the help of vmkping I ping other nodes on the network vmnet16 with success.

  With the help of vmkping I tried to ping the other nodes in the network vmnet18, but that has failed.

  I have depolyed other non - ESXi VMs on the vmnet18 network, and they are able to ping each other, but are unable to ping or ping by the ESXI host.

  I tried various material virtual NIC as mentioned before, but without changes in the results.

  I tried to use only local network instead of the vmnet18 guest network segments with no change in results.

  When I find out the status of the network adapters on the ESXi host through vCenter or host incorporated client vmnic0 & 1 time display network information, but vmnic2 shows no networks. Yet, I know that there is a network with different VM communicate on it. Moreover, I was able to get all of this work on a Windows system running 10 Workstation (this is the laptop that my employer gives me with).

  Having built nested ESXi labs on different platforms as well as physical environments in the past, I'm very confused as to why I can't get this special configuration to work. At this point my gut tells me that this is probably a bug any with the nested themselves ESXi hosts. Since I can get all this work on vmnet16 including the management of ESXi hosts and the VCSA that I use, I am sure that my vSwitch configuration is correct (other than the IP address space and vmnic configurations is bascially the same). Because I can get other virtual machines to communicate over the network vmnet18 I don't see how can be a VMware Workstation for the issue physical Linux host. Is there something obvious I'm missing here? I read on the ESXi hosts nested under VMware Workstation after having known problems and bugs with networking. If anyone else has experienced this?

  Thanks for any help others can provide!

  Kind regards

  Patrick

  Well, the problem is now resolved. The problem was what covelli was trying to explain, but I couldn't because the physical host network adapters being mentioned.

  The problem on the Linux host, but it was a problem of permissions with the virtual Ethernet adapters. The following article has the fix:
  With the help of Ethernet virtual cards in Promiscuous Mode on a Linux host (287) | VMware KB

  Even if I launched the workstation under the root user I have yet met this problem and which still makes no sense to me, but change the permissions solve the problem. I was not getting an error message on my Linux Mint and Ubuntu system, but when I tried on a second box of Linux Mint that I just got the error has been generated, and the error message was the above link it contains.

  So, here's what I learned:

  (1) the question has nothing to with a VMware Workstation definition that you can configure.

  (2) the question has nothing to do with a physical network card.
  (3) the question has nothing to do with any vmnic on the nested ESXi host.

  (4) apparently virtual Ethernet adapters are not the correct permissions when created.

  All you have to do to fix this is:

  (1) open a terminal.

  (2) run the command ' sudo chmod a + rw/dev/vmnet * "(don't forget to run this each time that you create a new virtual network).

  You can also create a group, as shown in the link above and simply give this group the correct permissions. Personally, I think it's easier to just give everyone the rw permission.

  I appreciate the help that others have offered. I did not understand what was asked for in previous answers because of the terms that have been used.

• Update Windows 10 November (10586 aka 1511): bcdedit/set hypervisorlaunchtype off, but VMware Workstation does not start VMs with conflict of Hyper-V

  Hi all

  I upgraded from Windows 10 Windows 10 November updated this morning.

  I have the Hyper-V role is installed and use it from time to time, but bcdedit to configure the boot loader to disable Hyper-V by hypervisorlaunchtype power off.

  This technique has worked with 10 Windows and VMware Workstation and I could start and run virtual machines

  Since I did the upgrade, I can't start VM with this standard message "VMware Workstation and Hyper-V are not compatible"

  I am running VMware Workstation 10, but suspect that this problem also exists with later versions.

  Everyone knows about this problem?

  Someone at - he found a solution?

  I'm willing to fork over $150 for 12 workstations to solve this problem, but I want to know with certainty that it is circumventing my problem.

  Thanks for that.

  Uninstallation and reinstallation of the hyper-v feature, following the upgrade of Windows Windows 10 November 10 update solved the problem.

  I still need to run the following command to disable the Hyper-V technology

  bcdedit/set hypervisorlaunchtype

  Thanks to everyone for their help.

• Laboratory of vSAN in 0, 00 b ability (R2 2012 Windows vCenter) Workstation

  Hello

  I'll put up a Beta RC 6 environment vSphere in Workstation 10.0.4 and want to activate VSAN.

  The configuration steps correctly to my knowledge--> only the problem is there is exactly 0, 00 b vSAN capacity available.

  My setup;

  * OCZ Revodrive 500GB SSD

  * 10.0.4 Workstation / Windows 8.1

  * vSphere 6.0 RC with 3 knots of ESXi and vCenter based windows

  * Machines virtual ESXi have 3 vDisks, 1 for ESXi and two additional VSAN.

  * extra vDisk 1 = 10 GB for the emulation of SSD (10 SSD passtrough workstation does not work out-of-the-box with the Revodrive).

  * extra vDisk 2 = 100 GB of data vSAN.

  * Detection of SSD is emulated by the parameter "SCSIx.y.virtualSSD = true".

  * vmk is active vSAN

  * cluster = vSAN licensed

  

  I also do not operate on 5.5. U2.

  Please notify

  Hello

  I actually found the guilty myself; There is a known bug with 10 (10.0.4) Workstation and R2 2012 Windows networking, I was using as a vCenter server.

  Networking has been very bug, sometimes there was a connectivity and sometimes it was not.

  See the networking of VMware Workstation 10 bug/question/problem

  (workaround e1000e failed also in 10.0.4, because he was already using this parameter for the network card)

  When you use VCSA, worked vSAN configuration

• From ESX 3.5 to Windows 2003 VM Workstation 10

  I copied a windows 2003 vm from esx 3.5 and want to run under 10 workstation.

  The problems seem to be: 1. He starts but not the mouse, etc. 2. try to restart and it will not stop. 3. try to upgrade of the tools, and it does not restart. 4 get error on buslogic scsi problem

  5. If the power off, then NTLDR is missing when restart it.

  Would appreciate some advice on how best to move the windows 2003 VM from ESX 3.5 to 10 Workstation

  Regards, Mark

  Hello and welcome to the communities.

  How did you move it, or what was the process? You might want to try VMware Converter, if you do not.

• Visual Studio 2012 and VMWare workstation plugin does not work

  Today we moved to Visual Studio 2010 Visual Studio 2012 in our project.

  After installing VS2012, I installed VMWare workstation 9. To my surprise, it did not appear any menu in Visual Studio VMware. In the previous version, the menu item will automatically appear by the installation of VMWare. We use the VMWare plugin to debug Visual Studio applications on the virtual machine remotely.

  Does VMWare workstation 9.0 support Visual studio plugin for VS2012?

  My version of VMWare is 9.0.0 build-812388 and my version of Visual Studio is Visual Studio Premium 2012, 11.0.50727.1 RTMREL.

  The VS plugin that comes with 9 Workstation does not load in VS 2012 due to some changes in the interface COM vs.  The next update to 9 Workstation will correct this problem.

• Cannot install VM workstation 8

  First Error Message.

  UNKNOWN\Components\7ABFE44842C12B390AF18C3B9B1A1EE8\A57F49D06AE015943BFA1B54AFE9506C. Check that you have sufficient access to that key or contact your support team.

  This is the error message I get every time I try to install vm workstation 8 or any version 8.0.4 is the latest I think.

  I am able to install VM workstation 7 with no problems.

  I'm pretty close to just format my pc and start again if I can't solve this problem, been at it now for nearly 4 hours without a bit of luck.

  Anyone ever encountered this before?

  The complete record of the error message you mentioned is

  HKEY_LOCAL_MACHINE-1-5-18\Components\7ABFE44842C12B390AF18C3B9B1A1EE8\A57F49D06AE015943BFA1B54AFE9506C

  Please check, you have sufficient permissions for this key (permissions should be inherited).

  André

  PS http://www.symantec.com/business/support/index?page=content&id=TECH135922 is perhaps useful!

• RH11: Problem inserting data related to FM (FM10 and FM12) in a Robohelp project

  Hi all!

  We have 2 very newTCS 5 facilities (3.5 updates):

  All existing HR projects include data related to FM.

  On one of the workstations, we have serious problems.

  Old RH9 project work.

  BUT new RH11 is looping in calculation without end, when I try to update

  When I insert a FM related to a new project or existing projects.

  The error (after 10 minutes) says, that the FM file is not a propper FM file or Framemaker must be installed.

  FM 10 and 12 are installed and the files can be loaded without error. FM works without problem.

  This problem occurs only on a station, we looked

  the differences, but to no avail.

  We have re-installed the RH11, but no change.

  What can do us?

  Help, please!

  I have a machine configured with several versions of TCS and they run fine. That said, I would be a link with Word rather than Fm.

  I notice that begin you by saying TCS and mention then reinstall HR. I wonder if the problem is with Rh Fm see under the CHT, rather than as a separate application. You can only link with Fm if it was installed as part of the CHT, rather than as a separate application.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Is it me or is Workstation 7.1.5 a step backward?

  I absolutely love VMware Workstation. The only problem I regularly is that VMs freeze often, and I have to disconnect and reconnect my headset wireless Plantronics (USB 2.0) in the order of the Nations United-freeze the virtual machine and bring it back to life.

  I have considered upgrading to Workstation 8, but the advice I got in another thread here was that these problems are actually worse in 8 work stations. Needless to say, I was delighted to see the output of 7.1.5 which is advertised as "solve problems with USB 2.0 devices. But after using it for a few weeks, I find that the problems are much worse, not better.

  Is it just me or other users find 7.1.5 to be worse than 7.1 regarding USB gel VMs devices? Does anyone know any solutions or solutions to this? It is a real pain...

  Thank you

  xPat

  No problem; My helmet is ranked 4th poster in this thread:

  http://communities.VMware.com/message/1732451#1732451

  Good luck with it.

• Compatibility problem - Windows 7 with WS7 and HP Connection Manager 3

  Hi all

  I hope someone can help me. I have the following configuration:

  Laptop HP 8530w

  HP un2400 builtin Broadband Modem UMTS

  Windows 7 Professional x 64

  VMWare Workstation 7

  My problem is that the HP Connection Manager 3 for the HP un2400 doesn't work anymore after installing VMWare Workstation 7. I'm unable to connect to a UMTS network because the connection manager think, for vmnet1 and vmnet8 virtual network cards are online an internet connected.

  I tried to disable the virtual networks through the VMWare Network Editor. I can't disable the adapter, but when I apply the settings, the GUI is suspended.

  I need to uninstall the HP connection manager. After that, I am able to disable the cards.

  But ultimately I need for my work, the vmnet1 + 8 adapters on the host and Manager of HP connections.

  Does anyone have similar problems?

  Thanks for your help

  Kind regards

  Chris

  Well,.

  I did some more tests. I changed the startup type of the service USB arbitration for the delayed start.

  It works for me. Active delayed start the connection manager load the firmware of WWAN cards before USB arbitration service is embarrassing. The only condition is that the connection manager must be loaded at windows startup.

  Kind regards

  Sander