PPPOE problems

Similar Questions

• I have a WAN Miniport PPPOE problem. Can't connect to the internet.

  I have a WAN Miniport PPPOE problem. Can't connect to the internet.

  Hello

  If you have a Modem and a wireless router or a Modem/Router combination. Read its manual and configure the WAN for PPPOE port.

  http://www.ezlan.NET/PPPoE.html

• Time Capsule gen more recent problems PPPoE

  Hi, I have problems with the PPPoE connection in last TC with 7.7.7 firmware on it. When I put my dsl bridge modem and use the pppoe client in TC he just can't get IP address. I need reboot/update of TC for like 10 times or more to make it work. When I put my dsl router mode and I use TC only as DHCP server it works perfectly. What is the problem? Should I get RMA?

  I discovered, when I enter my details PPPoE client PPPoE TC and I put any name service, that I can not get the Internet to work, when I erase this service name I get all green lights and BAM, my internet connection works. But now is real problem, when I want to change something, for example DHCP reservations or anything else. If I click on update and the Service name field is empty so I can't have a internet connection. I need to re - enter any name service, and then the update, and then clear the name of the service for the empty field, then the work of internet connection. So I need to restart TC 3 times if I want to get internet connection.

  Think it's a bug in the firmware a little? I had this problem on 7.7.3 firmware also Pls help

• WRT 120 n PPPoE config problem

  Hello

  I have been using my wrt 120n with my network pppoe for a long time. Now I just reset the router and now I have a problem with the connection. I put my username and pass into Control Panel, clone my MAC and when click on connect button on the status Panel, I get an error page and is not connected to the internet.

  I use firmware 1.05 (later).

  When I try to config with original CD, it gives me the error message "your ethernet cable is not plugged in correctly", but it's in the right place (yellow).

  First connect your computer with the Ethernet cable modem and to your check if you are able to access the Internet.

  Also, check what IP address you get the modem.

  Connect the modem to the Internet port on the router.

  Connect to the computer with the Ethernet cable to the Ethernet port on your router.

  Press and hold the reset for 30 seconds.

  Cycle power to the modem and the router.

  Open the router configuration page,

  Go to the tab of the status of your router and see what the IP Internet address you get on your router.

  If 192.168.1.XX, then change the IP Address of the router 192.168.2.1.

  If you have found 0.0.0.0 then do the PPPoE connection on your router.

  See if that helps you.

• Problem with the Site to Site IPSec VPN using ADSL and PPPoE

  I have an IPSec site to Site VPN between a 2805 and an 1841. Both have fixed IP, but the end of 1841 uses a PPPoE and ADSL connection. The MTU that is displayed on the Dialer0 interface is 1454.

  I can get the packets through the Tunnel without problem (standard pings), but don't spend larger packages.

  Any suggestions?

  You can apply on both. Here's a URL that explain the problem of MTU and option in detail.

  http://www.Cisco.com/en/us/Tech/tk827/tk369/technologies_white_paper09186a00800d6979.shtml

  Kind regards

  Arul

  * Please Note If this can help *.

• Satellite A100 - PPPOE LAN card problem

  HI people,

  I have Toshiba Satellite A100 PSAANE with Intel PRO/100 VE network adapter. I thing my card works fine, but I'm a bit confused after a period of time "when I download torrents or web" my PPPOE connection is reset to zero. Connection restarts regularly, sometimes stable an hour but some times restarting all the 30 second:(ou minute ou 5...) I need your help please tell me my LAN is dead or?

  P.S. When I upload the same "torrents" files on my PC with atheros LAN everything is ok. Help, please

  Thank you

  You use Windows XP Home edition? If Yes, you have installed SP3?

• PPPoE with WRT400N problems

  I am replacing an old Netgear MR314 with Linksys wrt400n. I have an old Alcatel DSL modem ('speed touch Home'). When I daisy chain the wrt400n (planned for obtaining IP via DHCP) off the coast of the mr314, it works fine. However when I reconfigure the wrt400n to use PPPoE with the same PPPoE user name and password as the mr314 had and plug the wrt400n directly on the ADSL modem, the wrt400n never leaves 'connection' mode on the status page. There is no error reported, even when I mangle intentionally username. In addition, there is no flicker of Rx & Tx lights on the modem. I turned it off and them powered upwards in order (1 modem, then wrt400n), with the same result. It's like the wrt400n is not communicating with the modem, but it does not communicate with the old raouter. I use the same cables when I'm daisy chaining off the coast of the MR314. I also checked for firmware updates, and there is not.

  Since I havve a very old ADSL modem, I thought that maybe the wrt400n doesn't detect that the modem can be slow, that is, it cannot handle 100 MHz. So I put an old hub 10Base-T between the wrt400n and the ADSL modem... and now it connects. The router seems to work fine now.

• LRT224 Problem with PPPoE

  After updated firmware from v1.0.0.09 to v1.0.3.09. The PPPoE does not work anymore, it is unable to connect to the ISP. I do not any of the PPPoE setting change. I tried to restore the previous configuration, but it still does not. Please help me to sort. And how to restore to previous firmware v1.0.0.09? Links to download the previous firmware? Thank you

  If you are restoring a previous configuration file on the new firmware it will fail due to compatibility between the configurations of the firmware.

  I recommend resetting to the factory settings and reconfigure to scratch.

• E2000 wireless PPPOE connection problems.

  I checked my username and password again and again. When I try to connect the router to the internet, I get an error message saying IP not given. How can I fix it?

  slushpuppie371112 wrote:

  I checked my username and password again and again. When I try to connect the router to the internet, I get an error message saying IP not given. How can I fix it?

  Who is your ISP? What is the brand and the brand of modem? You are able to go online through your modem? What IP are you on the computer when it connects directly to the modem? It is possible that your modem doesn't require your router to PPPOE mode. Try to set the router to DHCP Auto Configuration.

• Configuration of the Airport Extreme problem and Vigor 120

  Hi all

  This is the case, I have vigor installation 120 in Bridge mode with my airport extreme with settings pppoe settings of my ISP of vpi/vci: 8/35 pppoe/llc adsl2 + login and password, when the force as a router configuration, there worked perfectly, but in Bridge mode has managed to establish a PPPoE to pc but when the connection with the airport no luck I got an invalid ip address and orange light flashing.

  I have the latest in airport and vigor firmware and I'm doing a powecycle reboot after each change.

  Here are the settings in effect 120

  

  

  Any help would be more than welcome

  It's sad to say THAT PPPOE on the Apple is not reliable.

  I have the same problem... I can't use routers Apple with PPPOE on my modem in bridge... regardless of the brand.

  PPPOE is a bunch of variations... PAP or CHAP for example... and the number of... repeated attempts time between repetitions.

  Apple offers zero... whether it's no control... they are all available right now to find out what newspapers or.

  I had to simply replace the Apple router with another router... any other router seems to work fine... It's just the Apple that failed on me...

  I tried with several different Apple routers using all the old firmware, at latest... all fail. So I guess it's less coherent.

• Connectivity with AT & T-Motorola 3360 and Airport Extreme problems

  Bought a new extreme-Airport (7.7.3) to replace my old AE after 9 years of service.  The installation procedure, but could not get the airport to connect with my modem (Motorola 3360).  Called at & T and they crossed put me the modem in Bridge mode and which seemed to work.  But only temporarily (about 5 hours).  Restart the modem and the airport was not working.  Troubleshooting I tried to plug my MacBook directly into the modem, but even the computer couldn't get an internet connection.  Another call to AT & T and they reconfigure the modem to their end.  After 90 minutes and try everything they could, they have finally admitted defeat and told me that they could not solve the problem.

  However, after a fairly exhaustive search of this forum, seems to be two issues that many people is with Airport extreme.  One is that the modem (in this case a Motorola 3360) is perhaps not fully compatible with the airport.  The AT & T support person was not aware of this until I asked about it, so she did a quick search and was rather surprised to see that there is a lot of people having problems with the Motorola Modem.  She told me that they use no more Motorola modems but ship the 6200 of Netgear.  "All know issues?", I asked.  She sought and, to his surprise, even once, there was.

  So, first question.  Does anyone know a modem that is compatible with the airport or use one that they had to limit problems with?

  The second question prevailing seems to be with the IPv6 protocol.  Anyone know if there are problems with the AT & T IPv6 protocol and the most extreme airport?  I did not disable IPv6 yet to see if that helps.  I thought I'd ask here first.  Couldn't find anything on the AT & T site.

  When I return from the road (great place to go to get away from technology) I will make a new round of full power of all the components and try Setup again from scratch.

  Any ideas or suggestions would be greatly appreciated.  Miss all know profanity.

  Thank you.

  Any other relevant information: 6.3.1 the utility Airport, Airport Extreme 7.7.3, MacBook Pro running 10.8.4, modem Motorola 3360, AT & T high speed DSL, shoe size 11-1/2 wide.

  When you have configured the 3360 as a 'bridge', this would mean that the AirPort Extreme should then be put in place to provide the PPPoE connection service. The airports are not known for their reliability in this type of installation... no matter the type of modem that you can select, so I drop this method as a connection option.

  If you want to keep the 3360... and you have time to experiment... then you can set the 3360 to its original default settings and configure the router from the airport most convenient to connect using DHCP in router Mode of DHCP and NAT.  That will produce what is called a message Double NAT, but maybe it's not of concern on a simple home network, and Apple provides you with the option 'Ignore' the Double NAT, so the airport will display a green light instead a light orange blinking slow.

  You need to try this configuration for a few days to see if the Double NAT will be a problem or not, because it is not possible to predict the effect of a Double NAT on a network... you have to test a few days see how things behave.  If this configuration works well, for you, then you can leave it as what.

  Please note that I do not recommend this type of installation, just suggesting it as an option this work could , if you want to keep the 3360.

  How Double NAT affect IPv6, I can't tell, since I did not use att for several years, and I'm not familiar with their implementation. On wired, IPv6 works fine on the airport with Comcast and Time Warner.  We can provide these parameters for you if want, but have no idea how well... (or if)... they will work with ATT.

  If the installation of Double NAT does not work, your best option would be to go there and get a modem/router or gateway to ATT device and then set up the most convenient airport in Bridge Mode works correctly with the modem/router ATT.  You will turn on the routing of ATT function in this type of installation, but the airport can also produce a signal from the wireless network that you can use.  The modem/router ATT will also provide a wireless signal that you could use for guests, or disable the feature, if you do not need two wireless networks.

  This may also be the best option if you want to configure IPv6 as IPv6 of ATT service must be compatible with the modems/routers and gateways.

• Satellite Pro L300 - 'problem adapter - driver not installed.

  I replaced Vista with XP. Almost everything well except that I get this problem adapter - driver not installed message"whenever I connect. I have been on the download from Toshiba site and almost everything has been installed to the L300. Not very techinical so I would be grateful for simple answers.

  If you can help I would be very grateful.

  I went to Accessories - system information and here is the result:
  Connection TV/video Microsoft name [00000001]
  Card type not available
  Connection TV/video Microsoft product Type
  Installed Yes
  PNP ID of device not available
  Last reset 10/05/2012 07:09
  Index 1
  Service name NdisIP
  IP address not available
  IP subnet not available
  Default IP gateway not available
  Active Yes DHCP
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available

  Name [00000002] RAS Async adapter
  Card type not available
  Card product Type RAS Async
  Installed Yes
  PNP ID of device not available
  Last reset 10/05/2012 07:09
  Index 2
  Service name AsyncMac
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available

  Name [00000003] Wan WAN (L2TP) Miniport
  Card type not available
  Product type Wan (L2TP) WAN Miniport
  Installed Yes
  ROOT\MS_L2TPMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 3
  Service name Rasl2tp
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\rasl2tp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 50,13 KB (51 328 bytes), 04/08/2004-20:00)

  Name [00000004] Wan WAN (PPTP) Miniport
  Adapter Type wide area network (WAN)
  Product type Miniport Wan WAN (PPTP)
  Installed Yes
  ROOT\MS_PPTPMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 4
  Service name PptpMiniport
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 50:50:54:50:30:30
  Driver c:\windows\system32\drivers\raspptp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 47.25 KB (48 384 bytes), 04/08/2004-20:00)

  Name [00000005] WAN (PPPOE) Miniport
  Adapter Type wide area network (WAN)
  Product type WAN (PPPOE) Miniport
  Installed Yes
  ROOT\MS_PPPOEMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 5
  Service name RasPppoe
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 33:50:6F:45:30:30
  Driver c:\windows\system32\drivers\raspppoe.sys (5.1.2600.5512 (xpsp.080413 - 0852), 40,50 KB (41 472 bytes), 04/08/2004-20:00)

  Name [00000006] Direct parallel
  Card type not available
  Product Type Direct parallel
  Installed Yes
  ROOT\MS_PTIMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 6
  Service name Raspti
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\raspti.sys (5.1.2600.0 (xpclient.010817 - 1148), 16,13 KB (16 512 bytes), 04/08/2004-20:00)

  Name [00000007] Wan (IP) Miniport
  Card type not available
  Type of product (IP) WAN Miniport
  Installed Yes
  ROOT\MS_NDISWANIP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 7
  Service name NdisWan
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\ndiswan.sys (5.1.2600.5512 (xpsp.080413 - 0852), 89,38 KB (91 520 bytes), 04/08/2004-20:00)

  Name [00000008] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  8 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address A4:3E:20:52:41:53
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000009] Realtek PCIe FE Family Controller
  Adapter Type Ethernet 802.3
  Product Type Realtek PCIe FE Family Controller
  Installed Yes
  PNP ID of device PCI\VEN_10EC & DEV_8136 & SUBSYS_FF641179 & REV_02\4 & 23F 5EDAD & 0 & 00E0
  Last reset 10/05/2012 07:09
  Index 9
  RTLE8023xp service name
  The 0.0.0.0 IP address
  IP subnet
  Default IP gateway not available
  Active Yes DHCP
  255.255.255.255 DHCP server
  DHCP lease expires 21/03/2012 13:23
  DHCP lease obtained 21/03/2012 12:23
  MAC address 00:1E:33:3F:0 D: 3RD
  IO port 0 x 00003000-0x00004FFF
  0xD0010000-0xD0010FFF memory address
  0xD0000000-0xD10FFFFF memory address
  IRQ channel, IRQ 16
  Driver c:\windows\system32\drivers\rtenicxp.sys (5.764.0702.2010 built by: WinDDK, Ko 228,90 (234 392 bytes), 21/03/2012 12:23)

  Name [00000010] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0001 PNP device ID
  Last reset 10/05/2012 07:09
  Index 10
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 00:1E:33:3F:0 D: 3RD
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000011] wireless intermediate driver
  Adapter Type Ethernet 802.3
  Product Type Wireless intermediate driver
  Installed Yes
  ROOT\WSIMDMP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  11 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\wsimd.sys (1.0.0.83, 56,06 KB (57 408 bytes), 12/04/2012 23:25)

  Name [00000012] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0002 PNP device ID
  Last reset 10/05/2012 07:09
  12 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000016] Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Adapter Type Ethernet 802.3
  Product Type Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Installed Yes
  USB\VID_0BDA & PID_8198\00E04C000001 PNP device ID
  Last reset 10/05/2012 07:09
  Index 16
  Service name RTL8187B
  10.1.1.4 IP address
  255.0.0.0 subnet IP
  Gateway IP 10.1.1.1
  Active Yes DHCP
  10.1.1.1 DHCP server
  DHCP lease expires on 10/05/2012 08:10
  DHCP lease obtained 10/05/2012 07:10
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\rtl8187b.sys (5.1116.1226.2007 built by: WinDDK, 281.25 KB (288 000 bytes), 29/03/2012 09:41)

  Thank you!!!

  Can you please open device manager and check if this is some unknown device listed?

  By the way: see also http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

• ICS via connection PPPOE Miniport Wan via Microsoft Virtual WiFi miniport card

  Windows 7 Ultimate 64 bit. Pavilion 1201tx g6.

  I recently changed my ISP and it me connected via Dial-Up (WAN Miniport PPPOE) connection.

  My current network configuration is shown below:

  

  Problem is that now I can not share my Internet to my Android.
  Before, when I had just the active LAN connection, I could do it easily. But recent changes allow me to share internet.

  I use Virtual Router and sometimes I use guest also. He started not even when I ran the commands in cmd. And I am the admin of my laptop.

  Need serious help please.

  
  ____________________________
  | Please hit Kudos, if I help you! |
  | |
  | WILL |
  |___________________________|

  In fact I already found solution myself. I used it every day.
  
  I need not create VPN. Normal ICS works well.
  
  I start Virtual Router as soon as I have the dian PPPoE connection and it works!

• Problems with wireless on Equium M70

  Hi, I bought an Equium M70 2 weeks for use at home and I bought a Belkin wireless router to use with my broadband (blueyonder). When I arrived it is at home, I realized that the router wanted to connect my modem to my PC, but my PC is not a network adapter (modem is connected by USB). So I went on the Blueyonder site, and they said that I could connect using my cable box and their router. So, I bought the router to use with the set - top box. When I had last week, I plugged it up to the set - top box and the laptop found and connected with excellent signal strength. But when I went to use internet, it opens the pages. I set up the router manually but I always had the same problem, he picks up the wireless, but won't let me use internet.

  Then yesterday, for some reason any he said "wireless turned off, please switch on ', even if I had not turned off. So I tried to put off and then on again, but no joy, I ended up having to do a system restore so that it can work. Now, I was looking on here to see if anyone else had the same problems, saw someone mention by pressing Fn + F8 to go wireless and bluetooth, so I pressed this thought, it can open something, and he says to me now I have to new switch wireless off (I tried pressing once again, but nothing happens also putting the switch wireless does not work)

  If anyone knows
  a how to turn my wireless without doing a system restore.
  b why I get a wireless connection, but cannot use the internet.

  Any help would be much appreciated

  Hello Matt

  I use the Belkin F5D7230-4 wireless router and everything works perfectly. Which one you have?

  If you have the same or similar router, you can use a LAN and WLAN connection. You will find LAN port on the back of your laptop. If your router is configured correctly you should just use LAN cable, connect the unit to the router and start Internet explorer. As I have already said it will work only if the router is configured properly.

  I use the PPPoE connection. On this path that the IP address will be given by the ISP and it must be defined on your laptop to automatically.

  (a) start the WLAN with antenna WLAN switch
  -check if the wireless card is enabled in device or tool ConfigFree Manager

  (b) in my opinion you should check the settings of the router. If you want you can try to use the new Intel's WLAN driver. You can find it on http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Good bye

• Fragment of IP problem PS3 (netgear D6000)

  Hey guys, I recebtly was seen this problem on my PS3 where I can't play online and I have test fo a PS3 with an error that comes up saying "the router in use does not support ip fragmebts. I tried all possible solutions and my router is brand new and foesnt used to do this error, so if anyone has a solution that they thibk will help with router thia, I'd appreciate it a lot, thanks!

  Sorry, I'm using PPPOE, PPTP, L2TP, it is said he turned on!...