PPT loop to serve the lobby layout

Similar Questions

• I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  To do that you will need to change the varibles PID values and then use the sliders to add numbers to a latch for variables that point.

  This is how I think it works in Version 8.

  In all cases, you should move on to 12 more stable summer.

  In addition, unless that is a very slow process, I generally do not like closed loop PID with DASYLab due to the fact that computers is not reliable with timing.

• Why I can not get the value of the element on the tabular layout?

  Product, version, OS: Forms [32 bit] Version 9.0.4.0.19 + WinXP
  
  I have create a tabular layout and I inserted 3 records in [a TIME-NEW-FORM-INSTANCE], then I created a test button.
  But when I press the button, I can't get the value of the item on tabular layout.
  
  Can someone tell me why? any suggestion is appreciated.
  
  [A TIME-NEW-FORM-INSTANCE]:

  go_block('selected_stock_list');
  first_record;
  :selected_stock_list.stock_id   := '1001';
  :selected_stock_list.stock_desc := 'AAA';
  next_record;
  :selected_stock_list.stock_id   := '1002';
  :selected_stock_list.stock_desc := 'BBB';
  next_record;
  :selected_stock_list.stock_id   := '1003';
  :selected_stock_list.stock_desc := 'CCC';
  first_record;

  [WHEN BUTTON PRESSED]:

  go_block('SELECTED_STOCK_LIST');
  first_record;
  loop
     if :selected_stock_list.stock_id is not null then
       --message('abc');
       message('stock_id:'||nvl(:selected_stock_list.stock_id,'XXX')); pause;
    end if;
    if :system.last_record = 'TRUE' then
      exit;  -- reached last record so exit loop
    else
      next_record;
    end if;
  end loop;

  Remove the break or see the status bar

  Please mark helpful/correct

  Iqbal

  Published by: Sabrina on May 3, 2009 20:50

• my air ipad storage is almost full. How do I purge of the less important items? Y at - it app to serve the music and pictures in double?

  My air ipad storage is almost full.

  How do I purge of the less important items?

  Y at - it app to serve the music and pictures in double?

  How can I keep on my ipad apps that are shared by other devices?

  First, have you checked when most of the storage used for?

  Check your storage space on your iPhone, iPad and iPod touch - Apple Support

• I get a white extra page when I uncheck shrink to fix in the printer layout

  I print of in firefox 32.0.1 and I unchecked the shrink to fit page width in the page layout. My impression looks like now there but Joanie I get an additional blank page. If I check my impression looks bad but no extra page prints.

  This happens with every page you are trying to print from Firefox?

  This happens quite often when the printed page looks like it should appear on the page, but made a few extra padding or a white space at the bottom, that runs on a second page.

  If this is true, then the simplest solution is to enter a print range in the print dialog box ("' Pages of: 1: 1" ").

• Sorry, but I don't like the new layout

  The new layout looks slick and all, but it is very difficult to follow the discussions. Please fix. I would like to see all the messages and click on see all responses. It seems much harder to navigate the site with these new changes. Am just missing something?

  Alfredo Jahn wrote:

  Am just missing something?

  Yes.

  Lack you an understanding of the terms of use of the Apple Support communities that you agreed using communities.

  Apple Support communities use agreement

  You comment on changes to the community of Apple support in the region of El Capitan.

  • You did so ask any technical question.
  • You have lost your comment, because it has nothing to do with OS X El Capitan.
  • Instead, you must submit your comments to Apple http://www.apple.com/feedback

• Firefox is not in the new layout, and I wish it were.

  I just installed firefox and I know that most people like the former route with the edit veiw history bookmarks tools and help file, but I liked the new layout with the orange button that says firefox and it was almost primarily as a tab that had all the options and I love this waaayy better, but now firefox is in the former route and I do not. in any case, I can switch to the new? BTW firefix is also updated.

  You get the orange Firefox menu button when the menu bar is hidden.

  • Firefox menu button > Options
  • View > toolbars (press F10 to display the menu bar)
  • Right click on empty toolbar space

  See also:

  • https://support.Mozilla.org/KB/how-do-i-get-Firefox-button
  • https://support.Mozilla.org/KB/menu+bar+is+missing

  Press the F10 key or press the Alt key to bring up the hidden 'bar menu' temporarily if necessary.

• I don't like the new layout, how can I go back the old traced page?

  I don't like the new layout, how to get back the old layout of the page?

  Looks as if you just use the option to hide the navigation toolbar.

  • See the controls, buttons, and Toolbars Customize Firefox

  It will be probably temporarily reappear if you press Alt on the keyboard. You can set to display help (I think that - not in Windows Me)

  • Firefox-> toolbars-> toolbar Navigation

• I rolled again Firefox 4.0 to 3.6 and now my navigation bar still looks like instead of 3.6 4.0 how to get the old layout back?

  I rolled again Firefox 4.0 to 3.6 and now my navigation bar still looks like instead of 3.6 4.0 how to get the old layout back?

  The fastest way is to use the option 'Restore the default toolbar set' as shown here - https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

• delete or rename custom loops added to the loop library

  Is it possible to delete or rename a loop added to the library of the loop? I misspelled a loop while creating and now it is saved, but it seems I can't rename it. I tried to look for the "My curls" folder in the apple loops folder, but I don't the have not found.

  Hello

  joctrf07 wrote:

  I tried to look for the "My curls" folder in the apple loops folder, but I don't the have not found.

  'User' loops are stored here:

  Macintosh HD > users > 'You' > library > Audio > loops Apple Loops > SingleFiles

  The library of the user is hidden by default. A way to get these is to use the Finder > go to menu while holding the Option key. The library is displayed in the menu reach.

  TDC

• Need to change the keyboard layout keyboard replacement

  Hi all

  I replaced my keyboard destroyed with a PC keyboard.
  While there are many ways to Microsoft to use the keys, all I want to do is install this keyboard in the hardware section of the computer, so the SHIFT 6 shows the & button rather than the old quarter of keyboards 7.

  All ideas

  Thank you

  The keyboard layout can be changed in the language and region of the control panel area.
  Go to control panel of control-> region and language-> tab keyboard & language-> change keyboard

  Under INSTALLED SERVICES, click ADD keyboard language

  Now can go up and down, or remove the keyboard language you don t want to use.

• Create a table in a loop 'for' (reset the number of loops)

  Hello

  I try to incorporate a signal of acceleration from an analog input CRIO to get speed and then further integrate to get the moving of a vibration system.

  I understand that to achieve integration, a table must be fed in. My problem is that I could not buffer the signal in a buffer block, as I couldn't find buffer blocks. so I decided to create my data table by using a loop "for". The nests of the loop 'for' inside a timed loop. The problem that I'm stuck on is how to reset the loop 'for' in order to fill the buffer with each iteration of the outer loop timed.

  I enclose the code if that helps. Note that I use labview in 2013.

  If anyone who has encountered a similar problem before can help me, I would be gratefull.

  Concerning

  Ali

  You can use a shift register initialized as inputs to your curls, to build your table of one. However, you realize, don't you, that the execution of your program as written loops as soon as the computer can spit out responses, then the output array may contain several points that took place before the entry has updated? Assuming that your thing cRIO (I've not worked with these) has integrated into its routine acquisition of calendar data, I suggest you put that inside the loop to get a data point by reading.

  And do you really want your graph to distance for update only every thousand points (points of acceleration million) speed?

  Cameron

• Cannot use Select inside the loop For inside the SCTL (FPGA) - Bug? An alternative?

  When I put a Select statement inside a loop in a loop of Timed Cycle in LabVIEW FPGA, I get the following error when I try to compile:

  "An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information:

  Error-61003 occurred at

  Possible reasons:

  LabVIEW FPGA: you cannot include this function in a loop For when the loop is within a single cycle timed loop. »

  I didn't know that whatever it is documented that says that this is not allowed; is this a bug or am I missing some documents?

  The code that causes this error looks like this, inside a SCTL (ignore Boolean wire wandering behind the loop for)

  

  I came up with the code below instead, which compiles into one Cycle timed loop, but it is a bit ugly. Does anyone have a better suggestion?

  

  This issue is currently followed under the CAR # 592391. Please keep an eye on our patches and new versions as usual!

• Move items outside of loops without breaking the threads

  Hi all

  is it possible to spend a few elements and their son outside a loop without breaking the connections? He became a real pain when you have more items to move and reconnect everything one by one.

  Thank you very much!

  Today, there is no option to do this directly. Which would probably require less work is to detach the buckle, move objects and then draw the loop again, but it would depend on the amount of work is required to configure the loop (shift registers, etc.). You will probably be able to write script code to do this (or to move the code outside the loop and rewiring it), but I expect that the work required to write and test the code will be larger than the work required to do this. You could do a search for the Quick Drop 'remove and rewiring' plugin to see how it works, as it does part of the work.

  A few years ago, NEITHER showed a demo of an experimental tactile editor who had this behavior integrated, if at least they are aware of him and maybe you will see in BT at a given time.

• Change the values of the cluster in while loop and in the face at the same time

  Hello.

  I have a little problem in a test program, that I'm working on. I'll try to simplify as much as possible. I have a cluster control that contains two controls A and B. I want to:

  1. switch to update the value of the command A a while loop
  2. allow the user to change the value of the B control through the face, while the loop is running

  To change the value of order in the while loop, I first get the cluster control cluster, update the value of the control for a way to group by name and finally rewrite the cluster in the cluster control.

  The problem is that if the user changes the value of the B control while control that is in the middle of the update, the new value of B control is lost because it was read before updating in the face. Is there a way to get around this?

  DennisBengs wrote:

  1. switch to update the value of the command A a while loop
  2. allow the user to change the value of the B control through the face, while the loop is running

  Then they do not belong in the same cluster.  They are disconnected obviously enough that they do not go hand in hand.

  Where it can get really complicated, it is that you're talking about the user and code changing the same cluster.  It is very dangerous and very difficult to manage.  You might be able to get there with a driving force.  But walk slightly, my friend.