prblem while allowing windws media center in prgrms and characteristics

Similar Questions

• "Media Center host module" and "ehRec.exe.

  After the reboot, I now get an error message titled "Media Center host Module", and when I click on the error report, it says something about "ehRec.exe.

  Hello Warhick1981,

  Thank you for your message.  Please follow the steps below to re - save some necessary files in Windows Media Center.
  Click 'Start' > select 'run '.
  Type cmd and press enter
  Once the open command prompt, type the following commands at the same time, pressing ENTER after each line.
  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  Restart your computer and test.
  Please let us know if it did or it does not solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Media Center Live TV and recorded TV no sound.

  After the upgrade from Vista to Windows 7 and get all the drivers updated, Windows 7 Media Center has no sound for TV or recorded TV, but sound works for all other programs, including just play music in media center.  Reading DVD and Bluray will similarly play with surround sound with HP DVD BD play, then it is certainly not an audio card/driver problem.  Any help would be greatly appreciated!

  An additional note: If you look at mixing devices, remember that you have multimedia running. If you do not, it may appear not as part of mixer. When I got a pronlem with no sound in WMC, but WMP worked (as well as my other apps), it turns out be the problem, but you would only see it when WMC is running.

  Thanks, my TV sound is is arrested without reason, but everything except the sound effects in media center worked. turned out that some how the mixer was gone the media center to 0 and left it like that.

  music media player plays even when he is selected in media center is not affected

• Vista Ultimate x 64 Media Center hang during and after the recording program

  I recently bought a Sony VGC-RT150Y.  More information can be obtained here:

  http://www.SonyStyle.com/webapp/WCS/stores/servlet/ProductDisplay?catalogId=10551&StoreID=10151&langid=-1&ProductID=8198552921665507557

  Highlights of material are:

  NVIDIA® GeForce® 9600M GT GPU

  AVerMedia 313 has (analog TV tuner card)

  AVerMedia A317D (digital TV tuner card)

  The unit works Vistax64, Ultimate Edition.  I installed all the updates that are available through Microsoft Update.  And there is no download with Sony indicating that they could help solve the problem I have.

  The problem is that the computer hangs sporadically after that it registers a program.  After a night of record unattended, the unit is on and does not respond to the keyboard.  The display is blank or frozen.  The computer is connected via a wired network.  I try clicking of the camera and it does not.

  Sometimes programs are saved in their entirety.   Sometimes programs are truncated.

  When I try to get more information via the monitor of performance & reliability, all I get is "stop disruptive."  When I go into the control panel "Report Problems", there is no reported problems.  History of recording program in Media Center lists only one generic error indicating power has been disrupted or the system was not available.  I know that there is no power failure, because I have a NAS connected to an inverter and there is no paper power failure.

  I reported the problem to Sony.  They sent a technician to replace the power supply and the motherboard.  Still no change.

  Defective equipment could only be a TV tuner or the RAM.  All other material was traded through the exchange of motherboard.

  I'm now back to thinking it's a software problem.  Any ideas on how to start this chasing?

  After having poking around on the forums and a little thought, here's what I'll try:

  1. play with the power settings to ensure that the unit never sleeps.  I want to see if the problem is with MCE or power management.

  2. try 'analog' instead of digital recording.  I'm mainly recording clear QAM channels.

  I'd be open to other suggestions that you (all) may have to try to understand this.

  Hi Claude,.
   
  Thank you for writing to Microsoft answers Community Forums.
   
  Re-run the installation of Windows Media Center and check if it crashes while recording. To do this, follow these steps:
   
  1 start Windows Media Center.
  2. click tasks, and then click settings.
  3. click TV, and then click Set Up TV Signal.
  4. When you are notified that changing TV signal settings will interrupt recording, click Yes.
  5. on the Set Up Your TV Signal screen, click Next.
  6. check that the correct area is selected, click Yes, this region to configure TV services and then click Next.
  7. click on configure my TV signal automatically and then click Next.
  8. check that the TV signal configuration settings are correct, click Yes, and then click Next.
  9. click on lists Guide Setup and then click Next twice.
  10. in the privacy of the Guide screen, click Yes, and then click Next.
  11. If you agree to the terms of use of the Guide, click on I agree, and then click Next.
  Note to continue, you must click on I agree to accept the terms of use of the Guide.
  12. click on manual download and then click Next twice.
  13. When you are prompted, type your ZIP Code or the Postal Code, and then click Next.
  14. If you are prompted, verify your signal provider, and then click Next.
  Note After Windows Media Center Download the Guide, the Internet connection is no longer necessary.
  15. follow the remaining steps to complete the installation. You may have to restart Windows Media Center.

  If the problem persists, reply came back with the following details:
  1. Since when are you facing this problem?
  2. is it works much earlier?
  3. have you made changes recently, until this problem occurred?
  4 display error messages that are recorded in the event log and let us know if you find errors.
  To view the event viewer:
  -Click Start, in the start search box tpe eventvwr.msc, and then on enter.
  -Select the Application's entry in the left pane
  -In the right pane, locate the entry for preceded a red X error
   
  It will be useful.
   
  Kind regards

  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I try to open an attachment, Windows Media Center comes in and tries to open it as a audio or video media.

  I have to be able to read the news sent me.  Somehow... the other day, Windows Media Center downloaded on my computer.  I'm unable to determine if I should delete or keep.  It looks like the be-all at the end of everything, the next thing besth for audio and video.  However, I'm unable to open the attached docs now.  I also noticed that when I compose an email, I hard attach files or using the tools to change my font, bold, italic, etc. settings.  Help please.  If you have an idea how to fix this, I'd really appreciate your comments.

  Sue

  Hi Sue,

  1. using any client e-mail (Windows Live Mail, Outlook) or a Webmail?

  2. What is the issue that you are facing while opening attach documents?

  Try the following and see if it helps.

  Method 1:

  I you suggest to download the files and save it on your computer and then try to access the data files using the program and check if it helps.

  Method 2:

  Refer to the steps in the following Microsoft article and check.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  Keep us informed on the status of the issue.

• When you use media center tv, registered and menus do not load and display regular

  When I select tv... then recorded... the screen displays (loading). The load never completes and hangs the system. I have to use (esc) to exit the application

  Hello

  (1) have you installed Windows XP Media Center Edition on your computer?
  (2) what is the brand and model of the computer?

  You can try the following method and check if it helps.

  Method 1:
  (a) computer and do not open any other software before you watch TV. Close software may not be sufficient in some cases.
  (b) after the opening of Media Center, wait about 10 seconds before trying to watch TV.
  (c) If you have recently installed new TV tuner hardware, make sure it is properly connected/sitting, make sure that it is compatible with the version of Media Center you are using.
  (d) reinstall the TV tuner drivers. If you have installed a tuner separately, reinstall the drivers disc that came with the tuner.
  (e) use Windows system restore to restore the system at a time where the error will not occur.

  Method 2:
  (a) turn on the Media Center computer and connect to the Internet.
  (b) click Start, all programs, and then click Windows Update.
  (c) I agree to download plug-ins from Microsoft if you are prompted.
  (d) to read and respond to information on the Web page. Carefully read the page that the information may change from time to time.

  Method 3:
  (a) the television signal must come into the computer through the coax or s-video input. Make sure that you do not connect the standard video cable (RCA style) on the audio or the video output on the graphics card. Use the standard video adapter S-video if we use a standard video cable.
  (b) connect the end of the s-video cable or coaxial cable into a TV set to see if the cable is working properly.
  (c) ensure that the TV signal settings are correct for the Media Center software.

• I got a microsoft windows XP Media Center Edition 2005, and I can't do windows media player 11 basis that I've not updated cumulative 2 where to find this update?

  because it says I need to download the Update Rollup 2 for media center edition units 2005 but I can't find it... can someone help me find...?

  Artistic salvation,

  Thanks for posting. The KB below should explain the update in detail. You should be able to get the update through Windows Update.

  http://support.Microsoft.com/default.aspx/KB/900325

  I hope this helps. If you have any questions please let us know.
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• 'windows media center' on Vista32 and Vista64 can't see movies on 'disc of Windows 7 "

  I have 2 Windows 7 machines.   We have a lot of movies (VOB files) 3 TB drive.   The other Windows 7 machine can play movies very well since Windows Media Center.  But I have 2 other machines (a Vista 32-bit and a 64-bit Vista).  The two Vista machines can see through Explorer, but in Windows Media Center movie files, nor machine can find movies when I try to add them to the library.

  I use to have movies on discs smaller on Vista32 bit machine and all 4 machines could play movies very well.

  Does anyone know of issues where WMC on Vista is not able to see movies on Windows 7 machines?     Thanks in advance.

  Peter

  Hello

  1. are you able to play this movie in other applications?

  I suggest you to follow the steps from the link below and check if it helps.

  Make sure that files are shared properly by following the steps from the link provided below:

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Networking of computers running different versions of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Hope this information is useful.

• Windows Media Center photo date AND time

  Is it possible to have Windows Media Center to deliver photos in Date AND time order.  I have several photos taken at a given date in my folder, but WMC puts in the random time sequence in a date.  My Pictures folder is in date and time order

  Hi gingerandbuddy,

  Follow the steps below to organize photos in media center in groups.
  You can only group by alphabetical order and date wise, but you can also add the tag for photos that would make it easier to find photos.

  1. on the Start screen, navigate to pictures + videos, and then click picture library.
  2. click on Folders to sort your files and folders in alphabetical order, click date taken to sort your folders and files by date or click tags to sort your files by tags that have been applied. (To learn more about labels and how to use them, see tag pictures so they are easier to find.)

  Play video and watch pictures in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/play-video-and-watch-pictures-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Synchronize music from mp3 player to Windws Media Center music

  Original title: SYNC MUSIC

  Is it possible to sync music from an mp3 player in my library of music to windows media?

  Hello

  You can use Windows Media Player to copy music, videos and pictures of the Player library to a portable device, such as a compatible MP3 player. This process is called synchronization.

  You can read these articles and check if that helps.

  Sync manually in Windows Media Player: http://windows.microsoft.com/en-gb/windows7/sync-manually-in-windows-media-player

  Set up a device to sync in Windows Media Player: http://windows.microsoft.com/en-gb/windows7/set-up-a-device-to-sync-in-windows-media-player

  Getting started with Windows Media Player: http://windows.microsoft.com/en-gb/windows7/getting-started-with-windows-media-player

  Windows Media Player, frequently asked questions: http://windows.microsoft.com/en-gb/windows7/windows-media-player-frequently-asked-questions

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• I have a hp media center tv m7640n and I had to get a copy of the media library but theres a question

  There a? in yellow and I installed all the drivers when I look it says something to do with location on system compatible ACPI Microsoft I have no idea of what's probably missing a driver I installed all windows updates and does not change

  Hello:

  It was what I expected... A very strange balloon pilot who is hard to find.

  I enclose below.

  Unzip it into a folder. Create a folder and unzip it to him and keep the folder where you can easily remember where browse to it.

  You must manually install this driver.

  Click on the? device. Click on update driver driver. Select manual search (specific location), and then navigate to the folder.

  The driver should install.

  Paul

• Impossible to change the Windows Media Center guide to allow the use of ot TV relay stations (translators)

  Live TV with Windows Media Center, where RF channels are different from that of the guide because of the distance TV translators (relay Stations)

  Cannot change the guide to allow the use ot (translators) television relay stations where the RF TV channel is different from the current station. For example, Station POLO6N is 9 RF channel in Eugene, OR, but here on the coast, it is the 35 RF channel. Zip code for our region apparently points to the station itself RF channel and the number of 1092 is shown and dimmed so that it cannot be changed. How the inputs of channel can be modified to adapt to this situation? Here on the coast, we're out of range (mountains, etc.) of the station itself.

  BH

  I have apparently discovered a way to watch and record live TV using Windows Media Center where the geographical area is served by the translators of the TV and the.

  If you configure the TV channels using only NOT the guide and using Add missing channels feature to add and configure the channels you use before you download the guide, you can set the actual RF frequencies of TV translators serving your area. In my case, I had to add the letters TD after the call signs of stations so that when I load the guide, he be to point to the current channel.

  After having added all channels and before loading guide, check the reception using the function designed to help you in the pointing of your antenna. Then load the guide and your channel configuration is retained and stored in a file pref.xml which apparently replaces the channels.xml file created by the loading guide.

  Unfortunately, detailed documentation on the product missing apparently (help files I found only State to follow the guests), or I didn't find it. In all cases, you can use Windows Media Center to watch and record live TV if you live in an area served by the translators/TV relay stations with different channels channels over-the-aor real real TV stations.

  If you find that you need to change a channel, use channel add rather than the function Edit channels, clear the X in the box and start over with this channel.

  BH

• In Media Center Chess Titans, how can I remove the 3 Menu buttons up (game vs man, play Vs computer, exit) while I'm playing?

  In Media Center Chess Titans, how can I remove the 3 Menu buttons up (game vs man, play Vs computer, exit) while I'm playing?

  While I play Chess Titans (Media Center Version, full screen), there are 3 buttons on the top while I play (game vs man, play Vs computer, exit).  These buttons are boring because there is no need of them.  Make a right click on the screen offers these options.  In addition, when you regularly play Chess Titans (not the Version of Media Center and windowed screen), these 3 buttons do not exist.

  Hi Shpati,

  Thanks for posting this question in the Microsoft Community.

  Windows media center is normal and it is not possible to remove or deactivate form here.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Windows Media Center download movies/tv online

  Need help, troubleshooting Windows Media Center Netflix or streaming TV allows you to download to 99% then stalls never play programs

  Hello

  1. what exactly you are trying to download?
  2 you have videos in Netflix earlier?

  Try the following steps:

  Step 1: allow windows media Center to communicate through the firewall, and check if it solves the problem.
  a. open the Windows Firewall by clicking the Start button, then Control Panel. In the search box, type firewall and then click Windows Firewall.
  (b) in the left pane, click on allow a program or feature through Windows Firewall
  c. click on change settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  d. Select the checkbox next to windows media center, select the network locations that you want to allow communication, and then click OK.

  Check this link for more information about the firewall settings:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Step 2: temporarily disable all security software and check if it makes a difference.

  See this link:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• Window Media Center does not see the internet / only to download the guide.

  In the last three months. I was not able to download TV guide. I went through all NET configurations include the configuration of the tv tuner. Also bought new tuner. The computer has a modem of broad band always connectted to the internet. Count works very well on the internet. Media Center not connect and download tv guide to the registration of the advance. If I go to live TV, I see TV channels. It does not show the description of the channel or what's playing on this channel. When I go to the configuration of internet connection guide and test it just sitts there never out error just never connects. Help, please. I have windows Vista 32 bit. Also, did all the windows update and download the latest version of .net Framework.

  Be sure to reconfigure your firewall or internet security to allow WMC download guide. S.Sengupta Media Center MVP