PRC: Generate Invocie project for the range of projects is generated not invoice

Similar Questions

• Set a value for the range selector

  Hello

  I'm trying to set a value for a range by script selector but without success.

  Here is my line of code:

  -app.project.item (1).layer("Text1").property ("ADBE Text properties") .property ("ADBE Text Animator").property("ADBE_Text_Selector").property ("ADBE Text Index End") .setValue (3);

  the error I get is "Undefiened is not an object.

  Maybe the property method does not work for the range selector.

  I am rookie in script... that could explain the issue

  Thank you

  Aurélien

  Looks like you're missing a few steps. A host of text is included in the Group of text animations. A range selector is in the Group of selectors of text. Each of them can be referenced by name or index (you can have several animators and selectors).

  App.Project.Item (1).layer("Text1").property ("ADBE Text properties") ("ADBE Text animators") .property .property (1).property("ADBE_Text_Selectors").property (1) .property ("ADBE Text Index End") .setValue (3);

  I recommend you google and download the script "GimmePropPaths" from Jeff Almasol. Invaluable for this kid to reference.

  Paul

• The new XP installation error. The signature for the family Windows XP Setup is not valid. The error code is fffffc0d

  I'm doing a fresh install of Windows XP Edition family on a new hard drive.  I get the same error message indicating that the product catalog can not be installed. I reformatted and retryed with the same result. I tried a different HARD disk, but got the same trouble. I also tried installing XP Pro after a reformat and got the same error. The first error window says "the signature for the family Windows XP Setup is not valid. The error code is fffffc0d", and the second says" error: the system cannot find message for message number 0xfffffc0d text in the file for syssetup.dll fatal error messages: Setup failed to install the product catalogs. " Any directive or ideas would be greatly appreciated. THX

  Hello

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/307153

  Hope this information is useful.

• Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

  The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

  When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  Additional resources:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

• I have photoshop cc 2015. For the last 2 days it does not open when I double click the icon. What should I do?

  I have photoshop cc 2015. For the last 2 days it does not open when I double-click the icon. What can I do to fix this?

  OK completely reboot Windows 7. When he started to look in the Task Manager under process for photoshop.exe it shouldn't be there. If it is highlighted and press the button end process. Now right-click the Photoshop icon and select run as administrator. Photoshop starts, you should see photoshop.exe in the list of running processes. When you close Photoshop it should disappear from the list.

• First Adobe has charged to me for the second month and I do not think its fair... How do I get my money back?

  First Adobe has charged to me for the second month and I do not think its fair... How do I get my money back?

  You know that when you purchase a subscription, you do not pay a month ago and you own the software?

  You pay a subscription that you want to use Cloud Plans https://creative.adobe.com/plans software

  Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

• I can't understand how to access my Creative Suite cloud computer crash. I pay every month for the student version, but it is not let me re - download now that my computer is fixed and back.

  I can't understand how to access my Creative Suite cloud computer crash. I pay every month for the student version, but it is not let me re - download now that my computer is fixed and back. Looking for help.

  Unfortunately, I was unable to trace any CC with this identification code Adobe is there any other Adobe ID in which you have saved CC? Please let us know

  Concerning

  Stéphane

• paid for the subscription, but Muse CC does not work, he asks me the serial number

  paid for the subscription, but Muse CC does not work, he asks me the serial number, any help?

  Hello

  Depending on your operating system, please try the following steps

  Windows

  • Click on the start"" menu. Select "All programs" and then "accessories."
  • Right click on "Notepad" and select "run as Administrator"
  • Click "Continue" on the "Windows needs your permission" dialog box
  • When Notepad opens, click file, and then select open
  • In the file name field, type the following text:
  • C:\Windows\System32\Drivers\etc\hosts
  • If all of the entries in the host file include keywords such as "adobe", remove these entries. These are used for the purchase of licenses Adobe.
  • From the menu, select 'file', 'save' after changing
  • Restart the Muse

  Macintosh

  • Click the "Finder". Select the folder "Applications".
  • Open the "Utilities" folder and select "Terminal".
  • Type the following command:
  • sudo nano/etc/hosts
  • Enter the password associated with the user of the OS when prompted
  • If all of the entries in the host file include keywords such as "adobe", remove these entries. These are used for the purchase of licenses Adobe.
  • Press CTRL + o to save the file
  • Press Ctrl + x to close the file
  • Restart the Muse

  Let me know the result

• Rule - same offset for the rule above and below does not not the same distance from the paragraph

  Hello

  I'm trying to create rules above and below a type using nets of paragraph. However, as you'll see in the attached screenshot using the same offset distance for the rule above and below does not cause the same distance. The rule above and below are the po deux.125. What could go wrong? Thank you.

  

  Offsets are measured from the base line.

• 2821 ACL for the range of IP addresses

  We use an old Cisco 2821 on the edge of the internet for the initial incoming traffic filtering.  To try to block some networks of suppliers that are a source of SPAM, we have tried to apply an ACL that included a range of addresses as follows:

  access-list 110 deny host ip 198.20.160.0 0.0.31.255 255.255.255.255

  This command has been shorted to what follows in the running configuration:

  access-list 110 deny host ip 198.20.160.0 all

  The ACL doesn't seem to work, as we have always received spam through on this range.

  Any help is greatly appreciated.

  Thank you for your time.

  Hello

  Your syntax ACL deny only the host 192.20.160.0.

  If you look below

  access-list 110 deny ip host 198.20.160.0 0.0.31.255 255.255.255.255

  You have the source specified as host (198.20.160.0 host)

  destination like any other host (network mask and subnet inalid - 0.0.31.255 255.255.255.255)

  You want to block what subnet or network, gave me a source and destination subnet? . Will be recorrect the ACL

  HTH

  Sandy

• Complete Windows 8.1 features & drivers software for the range of all-in-one printers HP Officejet 5610

  I downloaded the software from the HP (AIO_CDB_NonNet_Full_Win_WW_140_408.exe) website.  When I try to install this software on my new computer 500 - HP Pavilion c60, out of the error to install it with a message that a file is missing (hpzshl.ice_s...).  Does anyone know the correct drivers 8.1 (x 64) for printers HP Officejet 5600 Series?

  Thanks for the recommendation; but uninstall and re - download do not solve the problem.   I ended up calling HP support and they just relaunched the .exe with administrator permissions and the error has been resolved.

• Is the best tool for the creation of a review with Notes/comments-Dreamweaver user site? CMS?

  Hi all

  I am really keen to develop a site of online game and have a few questions of CMS/Wordpress/Dreamweaver, I hope that you all can help me with, I thank you in advance for your patience as I am new on the development of the site.

  I think creating a review site which will involve write me about 100 customers of online game and then getting users to download their comments/suggestions, etc. Each of the reviews would be updated monthly with his stats, performance and other details. Each review contains a review of the text, the review video and various images and screenshots. Integrate user generated content will be an important factor.

  I'm trying to confuse me with all the prep work round to ensure that I have the right tools and technology, that I need to succeed. A lot of people told me I should use Wordpress because of the nature of my site, or at least a combination of Wordpress and Dreamweaver - don't know how it works exactly. I don't want to be too dependent on Wordpress just because I want to be sure my site can be customized and cultivate and select advanted more value for visitors to my site. .. .i would like to have a members area only at some point in the near future.

  Please see below for questions running in my head:

  1. do I need a separate CMS tool?... ... who may be best to consider the nature of my site?

  2. should I use Wordpress instead?... .or a combination of Wordpress and Dreamweaver? -Why should I use a combination of the two?

  3 SEO is a factor important - does make a difference?

  4. my comments will need to be updated every month, so I will try to maximize the use of models, etc. I need to create a dynamic site in Dreamweaver or a CMS that will manage?

  5. what options are best to avoid as much as hand-coding

  Thank for taking you the time to read this,... .any advice/guideance would be appreciated.

  Thank you

  Harps

  Still a bit on the comment by John, WordPress sites actually pretty well on make Google providing your site contains a keyword rich, relevant and fresh content.  WP itself will be neither help nor hinder your ranking.  It's up to you to create good content, forcing the humans will be interested.

  As for the future, I think that you are on solid ground.  WP has been around for a long time and continues to dominate the market of CMS open source.  There are 58 million sites on WordPress.com alone.  This includes not everybody who self-host WP on their own areas.  Give it whirl and see where it will lead.

  Nancy O.

• Email application password every time I open the e-mail. I have verizon internet but using Mozilla for the e-mail. I was not asked to password until this week.

  None of the explanations in support of Mozilla are useful. I went to tools and looked for the saved passwords and was not listed. I tried the password associated with my Verizon account, but the message keeps appearing. Recently I change my password for Verizon. I tried the old and the new. I always get the message box. Why? How can I get rid of him? It affects my outgoing emails?

  davislawn, were you able to solve your problem?

• Is there a phone rep who can help me get my profile on my new computer? I think I did OK for the tutorial, but now it does not work

  I had to buy a new computer as my last one had problems. I backed up what I think is all of my files on an external hard drive and moved them to the new computer but Thunderbird does not open. So I re downloaded Thunderbird and followed the tutorial on copying and pasting the old profile in the profile folder and now Thunderbrid (I think) will not open.

  Thunderbird profile cannot be loaded. It may be missing or inaccessible.
  

  So I put everything in the trash and re downloaded the program, and I still get the same error (I however wouldn't be the case that I was starting from scratch).

  In a little over my head. Any help?

  Try this method to import emails.
  addon ImportExporttools:

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  Download the as file and save it to your ex: desktop

  In Thunderbird

  • Tools > Addons or Menu icon > Addons
  • Click the gear icon and select "install the addon from file".
  • Find the downloaded as file and click 'open '.
  • You may have to restart Thunderbird.

  To import an mbox file (all messages are stored in Thunderbird mbox files)
  Right click on the email account
  Select: ImportExporttools > import a mbox file
  Select: directly import one or more mbox files
  Search for the file and click 'open '.

• For the last few weeks, firefox does not open on my computer. Internet explore and Safari opened on the web without problem. I have a Windows 7 computer.

  I don't know whether or not this began after an update.
  Thanks for your help.

  Joe G

  Hi jgorve.

  Looks like it may be better if you got a new start by uninstalling the current version and upgrade to the latest version of Firefox by following these steps:

  • Get the latest version: http://www.mozilla.org/en-US/firefox/new/
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.
  • Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  Hope that helps!