the Airport stops working intermittently

Similar Questions

• The noise stopped working on Satellite P100

  The noise stopped working.
  Toshiba diagnosis explains his failure, but after all the rest is good, any ideas?

  Hello

  That said the State of the sound card in Device Manager?
  You don't see any yellow exclamation?

  Have you tried to update (restore) audio driver?

  Have you checked if the 'secret' was not enabled?

  You hear something using the headset?

  Please check these simple steps, and view the results.

• Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image

  Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image for 15-30 minutes I lose everything I did when the program stops working... This is extremely frustrating, as I can't use the program

  Hello... Adobe, you have a phone number I can call to talk about this?

  Why don't answer you my survey?

• The Airport Extreme WiFi intermittent 2nd generation

  I'm having a weird problem with loss of WiFi on my Apple Airport Extreme.

  My 2nd generation that apple Airport Extreme Base Station began to close its WiFi broad signal several times.  It happens usually after 60 minutes or less works very well.  Power on and the new runs for awhile until it stops again the WiFi.  Green light normally forward either static rest without flickering to indicate data transfer, or it will just dark.  Sometimes it will turn off WiFi and then restart WiFi a few minutes later and appear to be good.  But mostly it just stops and I can, he extinguished/turned on to operate correctly with the WiFi again.

  Airport Extreme is connected by ethernet cable to my modem/router main fiber (which is a different floor home) and it is set to "Bridge" Mode  It worked without any problems and I did no changes to my system.  My ISP did update my modem broadband fiber a few weeks ago to a "Virgin Media Hub 3.0"I understand was made by Compal.»  It seems to work perfectly and I have no problems with speed download or reliability in wireframe.  I was away from home for about a week and was able to access my wireless IP camera remotely via my Airport Extreme with no problems.  The problem started almost immediately on my return, but, as I said, I did no changes to my network.  I have never had this kind of problem before with my Airport Extreme.

  I am running OS X Yosemite on an iMac that is connected by a cable ethernet to the Airport Extreme and seems to work very well even when WiFi is de-energized on the Airport Extreme.  Airport utility reports the airport as current firmware version 7.6.7.

  I used network utility, Fing, and it showed that my Airport Extreme has multiple IP addresses, which seem to conflict with the IP address for my three AppleTV.  I manually changed the IP addresses of the Apple TV to another IP address not conflicting, but Fing always shows that my Airport Extreme has three IP addresses and I still have the problem of WiFi.

  Any other suggestions on a probable cause of this problem or the best way to solve the problem would be much appreciated.

  Thank you!

  The question is the 2nd generation AE is now too old.

  I would say the power supply (external or internal) is dying.

  It service life is approximately 5 years... your must be 8 years old. so the solution is simple... buy a new one... or I'll tell... Newish...

• Click on the boxes only works intermittently

  Hello

  I use 7 Captivate to develop a guide of online user and have problems with click boxes. Some of them will be randomly cease to function and to freeze the project when you click it (it is after having published both in the preview of Captivate). Who click on the boxes what happened is completely random - it will happen with a clickbox and 10 minutes later we're going to work even once and another (who worked previously) will have stopped working. This is without changing any settings.

  The clickboxes are just linking to other slides in the project and are put on pause until the user clicks. I checked that slide numbers are well positioned and checked the timeline to ensure that it is not not to do with this.

  There is other intermittent issues, how I feel, like images flown over appearing as red squares and the project as a big black screen. It is normally resolved by closing the preview and re - open.

  I was wondering if it could be to do with the size of the project (96 slides and 405 mb), because the problems are so random it seems to be bound to parameters.

  I use Windows 7 and the project is previewing or opening Internet Explorer 9 (using a work PC).

  Anyone have any idea what might solve this problem?

  Thank you.

  Tom.

  Tutt... Tutt... language...

  405 MB for a project with slides below 100 waaaayyyy sounds excessive to me.  You have to deal with a corrupt project file.

  I suggest that you create a new empty project of the same size and then copy paste groups of 10 or 20 slides from the old project to the new.  Sometimes, you can strip the corruption caused by files bloated this way that it forces Captivate to recreate all the unique object ID again, but nothing that do not directly relate to a slide is left behind in the old project file.

  Let us know what your size drops down for once you do the exercise of copy paste.

• Safari to stopped working intermittently

  Last week over a period of 24 hours, our fossil site has stopped working properly in Safari (https://www.thefossilstore.com/). It worked fine in Firefox and Chrome at the time. Also, it was not fair on my iMac that I had this problem. I refreshed the cache of the browser without result. It has been fine since, but I fear that it may continue to happen again in the future.

  Can someone please advise on what could cause this problem and if so, a solution to prevent this happening again.

  I am running iMac, OS X El Capitan. 10.11.4 version

  Thanks in advance!

  It loads fine on Safari 9.1 / El Capitan 10.11.4 here.

  Try to delete cookies...

  In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site

  
  

  Exit then restart Safari and try your website.

• Laptop Dock trackpad stops working intermittently, everyone

  The trackpad stops intermittently and it does not appear to be linked to a particular application or action.

  Closing and reopening of the laptop lid (screen) seem to fix, but I'd rather the cause.

  Does anyone else know this?

  I would probably call the motorcycle warranty service...

• The mouse stops working after a few minutes

  Original title: my USB mouse ch

  My mouse stops working after a few minutes. whenever I have uninstall and re - inserts into the usb port of the computer does not recognize it.what can I do?

  Hi Ann Juel,

  1. what happens when you connect the USB mouse to the computer? You get the error message?

  2. What is the brand and model of the computer?

  3. What is the brand and model of the mouse?

  4. What is the operating system installed on the computer?

  We will analyze and identify the cause of the problem.

  Method 1:
  

  You can connect the mouse to another computer and check. Also perform the methods provided.

  Also, try a different USB port and check.

  Method 2:

  Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3:

  Check whether all settings in the mouse properties are correct or try to change the mouse settings and if it works.

  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Hope this information helps. Response with status so that we can help you.

• the right side of the bottom bar of the touchpad stop working. pls help. I can not copy, paste, etc. pls help

  The right side of the bottom bar of the touchpad of the ACER laptop stop working.   I can not copy, paste, etc. Help, please

  Hello

  It would be best to contact the manufacturer of the laptop computer for further assistance on touchpad issues.

  Support from Acer: http://support.acer.com/us/en/default.aspx

  Hope the information is useful.

• When my laptop battery died the printer stopped working, now does not start

  The laptop screen went black, (while a print job is in progress) I plugged in and restarted the computer.  Since that time there no task sent to this printer have been achieved. I had to go back to my old HP882C just plugged into the 2side Print Setup and finished work. HP C5580 had a task that will be

  not only cancel all print always not that hell has happened?

  Hello

  I suspect that when the battery is dead, the spooler has been altered.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

• The mouse stops working but left and right buttons still work.

  I'm having a problem with my mouse, the cursor will stop working, but all buttons still work. I tried another mouse, uninstall and reinstall the mouse driver updated and change USB ports, so it is not automatically turned off. Nothing works I found so far.

  I found something here: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-64-bit-mouse-pointer-not-moving-but/fc581ad9-87ac-410e-a7ae-55ffcf626f03?db=5

• My Bluetooth Mobile Keyboard 5000 stagnates and stops working intermittently

  I have a Microsoft Bluetooth Mobile Keyboard 5000 running 64-bit Windows 7 Pro SP1. When it works, it's great, and I like the compact design and wireless. But in the last few months, I noticed a few problems which become quite annoying:

  1. When I'm editing, the keyboard seems often slow to react. For example, I often use combinations of keys such as Ctrl + C or Ctrl + X, and it's as if the keyboard does not have the CTRL key immediately, so I find myself by typing 'C' or 'X' on my choice. If I click Cancel and try again, it usually works after that. Or I'll click on an input field and start typing and it takes 1 to 3 seconds for the text to appear, but it usually everything happens, is not as if the keyboard is in decline in strikes, but just a delay. It's almost like the keyboard has a period of awakening to send data. It doesn't seem to be a way to control or override this behavior. And we don't mean to be away from the keyboard for hours or anything like that; Instead, it's time to switch between windows.
  2. At least once a day, just a keyboard unresponsive altogether. When this happens, I can go into my Bluetooth settings, remove the device, press the Connect button on the back of the keyboard to set pairing mode again (or usually it comes automatically drops back in pairing mode when I delete) and then plug it in again. He sails right through matching and starts working again... until the next time it stops. There seems not to be a lot of consistency to when this happens, but this is often when my boss stops by my office and asked me to show him something. Needless to say, not the best time for the elegant Bluetooth keyboard go toots upward.

  The keyboard said it was MFG. 12/11, is less than 1 year old. Do I need better drivers? Can anyone recommend a troubleshooting step I've overlooked? The keyboard is damaged? I can send it to Microsoft for repair or diagnosis? Do I use? Thanks for any advice you can offer.

  Hello

  -You are aware of any changes made on the computer before this problem?
  -You are faced with the question while working on a certain application (like Microsoft Word) or the licensing is pure coincidence?
   
  Method 1: Run the Troubleshooting Utility from the link below and check if the problem persists.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2: I suggest you to see link below and check if it helps.
  Troubleshooting Wireless and Bluetooth problems
  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/keyboard/wireless-Bluetooth
  Also, I suggest you to contact Microsoft Hardware Support for better support.
  http://www.Microsoft.com/hardware/en-us/support
   
  Hope this information helps.

• Tactile mouse Microsoft stops working intermittently

  As the title says. Sometimes, the left click out and would not work until I did a right click on something. He would sometimes stop working entirely. I thought it was my usb hub, but I had the same problems on other computers (I own two of these mice) and I tried many things including putting the dongle in another USB plug, re-install the software, etc. I think it may be a hardware problem on these mice, and it seems I'm not the only one with this problem.

  I was just wondering if there is an easy solution for this because I have not found...

  Hello

  Try and perform the steps from this link,

  Troubleshoot the incidents of the response to the mouse or wireless keyboard:

  http://support.Microsoft.com/kb/838398

  Troubleshoot a wireless mouse that does not correctly:

  http://support.Microsoft.com/kb/321122

  If these steps do not help, then I suggest you to make contact with the Microsoft Hardware Support.

  http://www.Microsoft.com/hardware/en-us/support

• Click on the boxes stopped working

  I'm having a problem with my click boxes. This worked, but stopped. I use version 8.

  I have a navigation drag about 4 slides at the beginning. I click on this slide boxes that go to a specific slide. They have stopped working. I tried to recreate the problem and I added a few slides at the end of my project of 35 slides. When I tested a slide at the end of the project, it would jump to the correct slide. In other words, jump slide 36 to slide 38, or 36 slide in slide 39.

  Just for fun, I moved 36, my navigation test blade slide, at the front of the project. It has stopped working. Somehow, the click boxes work at the end of the project, but not at the beginning of the project.

  Any ideas?

  There are only two possibilities (know that sometimes HTML5 navigation did not work properly in 8.0.1 - but you have the same problems to SWF):

  1. something is wrong with your advanced action, or actions on the other slides
  2. your project is getting damaged.

  For the second case, attempt to copy a new blank project. In CP8 actions come along when you copy the object or slide, they are attached to. personally I would have created action shared, then you are sure that you can reuse them.

• I left the 29 days of the trial version of the creative cloud. Why the program stop working? No output whatsoever...

  Just download the free trial 30 days of creative cloud. I have 29 days left. Program suddenly stops working. No output whatsoever. That's happened?

  [email protected] wrote:

  and when I click on "continue trial", I can't use the program, regarding the recording and/or playback.

  Well, suppose it opens, and that the transport is not working. If this is the case, then there is one thing that stop it - no valid audio device found. Go to the Preferences menu and look at your hardware, then select something relevant (probably a device internal). If the answer is not obvious, report on what you see there.