Issue of Windows 7

Similar Questions

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• Anyone know of any compatibility issues with Windows 8 and RV series routers?

  I have a small network with a laptop computer, Windows 8, Windows XP desktop computer and a network MyBookLiveDuo storage device. I have sharing enabled between these devices. Everything worked well on a network switch. I replaced the switch with the RV110W VPN Firewall Router to add better security to my network before I have expand it. Since then, I have a laptop Windows 8 intermittent connectivity while the connectivity of the XP desktop computer shows no problem.

  On the laptop Windows 8 I ran network troubleshooting, and he complained that two devices on the network are (NAT) network address translation and the symptoms he describes is what I see. Problem is that I don't have a network Analyzer to look at the network in more depth. I looked online for the RV110W documentation and if NAT is listed as one of the characteristics, there is no discussion in the documentation on how to manage this feature in the router.

  I can connect to the Windows 8 laptop from Office XP and access shared content. I can connect to the Duo since Office XP without difficulty. However, except when they reappear periodically under the heading of my network in Explorer on the laptop Windows 8, I can't access the Office XP or the Duo of the laptop Windows 8. Curiously, however, I have a part of the Duo mapped as a network drive on the laptop Windows 8 and I can access it even when everything else has gone. Also, the interface of management for the Duo appears on the laptop Windows 8 and I can access the Duo to manage. Only, I can't access the shares on the Duo. Then all of a sudden they reappear under network in the file Explorer and I can then access. I think it must have to do with NAT, but I can't find anything out about it.

  If it's something I can turn on the router long enough to see if the problem goes away I would like to try, but I can't find it in the documentation, and I can't find it when I look aroiund in the management interface.

  The fact that I am not having the form of the XP desktop computer problem makes me think that a compatibility issue with Windows 8. Does anyone know if Windows 8 did anything with NAT? I try to get help from Microsoft Technical Support, but their level 1 tech told me to call Tech Support Pro when they open later this morning. Support cat Cisco won't open until Monday at 09:00.

  Also, throughout this connection problem Internet from the laptop through the router is never interrupted. It's strictly connectivity with other devices on the internal network that comes and goes.

  Hi Gregg,

  NAT must not play unless your applications on the internet. The "port Internet" or "WAN port" is a NAT port that converts your public IP address from ISP to your LAN subnet addresses. NAT allows multiple computers on a network to use 1 public IP address.

  If your devices are connected to the Ether "LAN ports" they are not affected by NAT unless they are Web applications. 4 'LAN ports"are 2 layer switch ports. This means that all local requests are forwarded by the switch ports.

  This device did replace exactly? The XP computers, DUET and window 8, make these products using the static IP address or you allow the RV110 to assign an IP address automatically? What IP address you are using on the LAN of the RV110?

  -Tom
  Please mark replied messages useful

• Microsoft Money 2005 issue on windows 8.

  Microsoft Money 2005 issue on windows 8.

  I have recently installed windows 8 on my laptop, but after reinstalling MS money 2005 seems to me impossible to restore data.

  I think that the problem might be that while my original Money 2005 had been updated to version 14.0.120.1105 now that I reinstalled the program, it is the original version 14.0.120.730.

  I am aware that Microsoft has officially stopped support for MS 2005. However as I live in England where no later version is available a sale is too much to ask that Microsoft makes updates available to allow a work produced by another MS product Ms

  Or loyalty toward Microsoft reimbursed by having to buy a third program of parties to import my data to work on their system.

  Visit http://social.microsoft.com/Forums/en/money/thread/479281b2-90f9-42ca-85f7-644fc6e1e5c3 and download the installer of Money 2005 UK QFE2.

  Don't forget to secure the download. The link can disappear at any moment and will not then possible to re - download.

• Private browsing issues: new window is a "pop-up" & right click on Favorites Displays grayed out options

  When I'm in the mode of private browsing in Firefox 38.0.1 for Windows 8.1, I can't do the following.

  1. when I click on a link to open a new window, the new window is like a pop-up window (no menus, no scroll bar). I have a blocked pop-up windows, it is like, but is not technically a pop-up window but it is not blocked.

  2. when I choose a bookmark and then right-click on it to choose another bookmark in a new window or new tab (or any other options that appear), the text is gray while I can't choose it.

  These "issues" are normal for Firefox 38.0.1?

  My suggestions for the settings to be performed in all: config. That type in the address bar, press the return key, then change these settings. Which will affect the popup windows. Does this affect the private windows?

• Y510p Trackpad driver issues on Windows 7

  I recently bought a Lenovo Y510p. Soon after receiving it, I wiped Windows 8 and installed Windows 7. I downloaded all the Windows 7 required drivers on the Lenovo support site and install without any problems. The problem I have is that most of the time the driver for the trackpad momentum seems to have issues. Device Manager acknowledges the mouse as a generic PS/2 mouse and the options of the momentum, under control panel > mouse is not CSA listed at all.

  I found a temporary solution to the problem. Uninstalling the drivers through the Device Manager, reboot, then install drivers the momentum of the Lenovo site, then reboot, I was able to get the mouse appears in the momentum Control Panel, where I could finally set my parameters. However, after my next reboot, the mouse was absent from the Panel momentum once more, and now I'm at square. I tried the solution that had previously worked, but I got no results.

  Anyone has any ideas or similar problems that they resolved?

  JacobT14 wrote:
  Altogether. First of all, I used http://mobilesupport.lenovo.com/us/en/downloads/ds035849 , this one, but noticed that also contained the Synaptics driver. So I downloaded this a http://www.station-drivers.com/index.php/downloads/Drivers/Elan/Elan-TouchPad-Drivers-Version-11.10... on the recommendation of a thread, I found somewhere (could be Lenovo forums, but I do not quite remember). You use the latter driver, I was able to recognize the trackpad once, but then, as I said, after I rebooted, it was gone.

  When you install the driver of Lenovo, you uncheck "install Synaptics... » ? Then install the expanded driver located in the C:\drivers\ folder...?

• Monitor the issue after Windows update

  I installed the Windows updates today, and after installing and restarting, the saturation of the color on my monitor is out of line. There is intense color saturation and it made all my files photo as well.

  Running windows 7 and a HP w2338h monitor.

  Thanks for any help on this

  fifthboss,
  You should look through the updates installed to see if there was an update to the video card.  I would then check with the manufacturer of your video card for the latest driver.  If you just updated to the most recent and feel it affected the color then you can restore the previous driver.  Then you can contact the manufacturer of the video card on the driver and they know the issue and see if they are still aware and have a fix. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion 15n - upgrade issues lower windows 7 (FN, aero peek and sleep keys)

  Hello

  I recently bought a HP Pavilion 15 (n097), which is pre-installed with windows 8... naturally I went down to Windows 7 and installed as a good number of pilots required system I could get my hands - everything seems to have worked pretty well, the only problem now is that:

  (1) I have no option "sleep" in the start menu, it is grayed out (only to stop, restart and hibernate are available)

  (2) making the skimming between surprisingly heavy programs is not supported by aero peek

  (3) none of the function buttons work

  I would be VERY grateful if anyone knew where I might be able to install the necessary drivers so that I can fix these problems were.

  Thanks in advance.

  tassilov

  You are the very welcome.

  Sorry the quick launch of the software did not work.  Unfortunately, I won't be able to provide additional assistance to this issue because I don't know any other software that you can use for this purpose.

  Here is the link for the graphics drivers that you need.

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23405&lang=eng&OSVersion=Windows%207%20(64-bit) * & DownloadType = 0a % 09% 09% 09% 09% 09% 09% 09Drivers % 0 a 09 09% 09% 09% 09% 09

  If you have not installed the Chipset Intel driver, I highly recommend you first install and reboot the computer before installing the graphics driver.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

• Windows Update issues. Windows Defender can't check definition error code 0 x 80242017 - after Re Installing Windows Vista updates. ?

  After reinstalling Windows, everything works fine until it fails to install and download updates.
  After that it automatically installs updates, it shows updates that failed, I try again but then it does not download or install updates everything at all!

  -J' have a lot of updates going back to years ago, it lists the Versions updated even with another publication date, what I need to download and install all?
  I should manually, choose to install only the latest versions?

  -Windows Defender error 0 x 80242017:
  Windows Defender had always worked without any problems before re-installing.

  -J' already downloaded Microsoft Fix it: it scans and fixes a few problems, but there is always an impossible problem to fix 'recent installation updates problems'

  Also, checked if Software Licensing service work but couldn't find it under services - this could be a related issue? or is located somewhere else?

  I now use the computer and everything else seems normal.

  -little background information:
  Decided to do a re-complete installation of Windows Vista on an old computer which was the minimal use (we tried to update every month)
  Why I decided to reinstall:
  During a session to install the fix, it never moved beyond the "installation of update 1 of ' it lasted there for several hours, after losing patience I Gilles downwards and then the problems started a week later.

  I was unable to use it without problems, sometimes I would get blue screens, get stuck checking DMI disc read error, or it wouldn't start at all. Also seems to be some registry problems.

  In the end, I was able to start but I was able to browse the internet. When I opened all the files, the window came out white, but he said that the number of files it contains.  Could not even open the start menu and was unable to use the restore system and when I access it from F8 it says it is running in a limited Diagnostic State and all restore points have disappeared.

  Last good known Configuration or Check Disk doesn't help. I reinstalled after that.

  .. Although old, The Works pretty good Comp for the people here who are going to use it for their homework and light internet use as my niece when here after school.

  I'm not a Tech person that's why I posted for help here = \

  Thank you in advance, all advice appreciated!

  1. all both installed on 22/09/2014

  2. it is not available

  3. 2 or 3 hours maybe? I downloaded webroot only after that I thought I was able to install the updates that lasted a few hours.

  4 definition version: 1.185.885.0 created 22/09/2014

  What happens when you try to update Defender via the UPDATE on the update tab button (for example, another error of 0 x 80242017)?  [DOCUMENT TEST/NOW]

  When you run a manual check of updates, is an update of definitions of Defender offered as an optional update and if so, allows it to install?

  Note: A computer can become infected a few seconds of being connected to the internet without a valid antivirus application installed. It of a very good chance that you see the effects of an infection being a certain type and that demand for Webroot is not installed or working properly.

  ===========================================================

  Error message when you run Windows Defender: «Error 0x800106ba»
  http://support.Microsoft.com/kb/931849

• DVD burning issues using windows vista

  OK so im, backup data out of my laptop. I have about 2 GB ready to be burned onto a dvd and I got a file over to burn was that of 600 MB should adjustment no problem at all but for some reason, vista tells me my dvd is full makes no sence so I burned dvd and went to my next dvd using the 600 MB file and it let me fill the full capacity of 4.7 GB dvd does vista sometimes to put a ghost or sometihng file that won't allow me to fill the disc ive met this problem once before and this is no his almost random logic

  Hi cocknballs4u,

  Try to copy the files in one shot and check if you still get the error message.
  Given that the issue occurs at random times, I suggest that you can delete the temporary files that are created by the burning.

  Navigate to the following location and delete them all the files in the temporary folder burn.
  Burn \appdata\Local\Microsoft\Windows\Burn\Temporary file C:\Users\

  Then delete temporary files on the computer.

  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Disc burning: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/disc-burning-frequently-asked-questions

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vostro 3550 graphics issues on Windows 8

  I downloaded and installed Windows 8 on my laptop Vostro 3550 (dual boot with Win7 Pro x 64 original). It would go as far as "Installing devices" and then the screen turns off. After several failed attempts (> 10) (woluld screen off but would continue to the HD activity), I went on the Win8 forums and found a few others having the same problem. Someone suggested using an external monitor and verification. Once I installed the monitor, I found that the Win 8, installed correctly, but no could not recognize the internal display. Everything works fine in Win8, except that she does not confess the internal display. So I installed video drivers Win7 from Dell, still no change. Update of said Win8 then there is new video drivers Intel it installed with no improvement. Works with the external monitor, but doesn't detect internal monitor. I'm not sure whether video driver issue or something to do with the chipset drivers. Pretty Win8 works fine on an old laptop HP Pavillion 5200 as well as one on an Intel assembled card mother Core2 Quad desktop with ATI graphics card. My Vostro config is Win7 Pro x 64, 8 GB of RAM, 320 7200 RPM HD, Intel HD3000 graphics card.

  Can someone help me with this problem.

  Thank you

  Adam

  A11 BIOS is the fix for this problem. A11 BIOS fixes black screen on Windows 8 (after installation).

• Issue of WIndows 8 Internet

  Hello IT professional.

  I'd appreciate if someone helps me understand the issue with my LAN network.

  Here's the scenario, I have the connection to the local network at home, I joined windows 7, windows 8, iphone 6, optus, implemented the box ranging from the internet too.

  I noticed that when I turn on my 8 portable windows to my other devices slow down Wi - Fi. My set up box and mobile phone slows down and find difficulties to receive signals from the Internet. As soon as I close to the bottom or off wifi on my windows 8 all devices work quite correctly.

  However, when I use my device windows 7, all networks works very well. It is unusual for deliver and make my head. Could you please explain or help me solve this problem.

  I have an NBN connection in my house and I am referring to all the devices connected to the wireless network.

  Thank you

  Roshan

  I begin by consulting the the manufacturers website for your laptop to a driver updated for the Wireless LAN card and install it if they are available.

  Also, see section 8.1 for Windows of the following article.

  https://support.Microsoft.com/en-us/KB/928152

• Communication issues in Windows 7 with the XBOX 360

  I also have the problem of my windows premium 7, refusing to talk to my xbox 360...< not="" the="" controller's..="" it="" talks="" to="" them="" fine="">

  But the Xbox itself on the other side ot the network...

  So please don't tell me to install controller drivers...

  Really do not do...

  Yes, I've read hundreds of times people have asked this very question.

  To always have the microlimp people answer with «just install the controller driver and everything'll be fine...»  You want a pill with this useless response? »

  My very expensive windows 7 gaming machine speaks to everything perfectly. Everything there is certified to work with windows... Nothing is no name made in China...

  And apparently the xbox slim is certified...

  Then why they will not speak to each other...

  The windows updates did not have a pilot.

  I tried the controller driver... It did not help at all...

  So please don't just tell me to install the controller driver...

  And maybe think about why we shouldn't just scrap xbox and get a media center that works?

  Hell I already used my Roku as well as the xbox...

  He and my windows machine 7 talk to each other with happiness...

  Original title: windows 7 driver driver to talk to an xbox 360.  Do not use the controller with a windows machine...

  Hello

  Thanks for the update on the issue. The query you requested is best suited to be posted on the Xbox forum. He is watched by other computing professionals who would be more likely to help you.

  Forum on the Xbox:

  http://forums.Xbox.com/xbox_forums/default.aspx

  Hope this information was useful.

• Issue of Windows Com Port 7.

  When my USB Ports are allocated for the devices in my device, they end allocated to a range higher than my devices are supported. Is it possible to reassign my com ports to a lower range.

  Hi Bryan,.

  Thanks for posting your query on the Microsoft Community.

  This problem is better suited in the forum TechNet that we have a dedicated team with advanced tools and permissions to help you with such questions. I suggest you post the same question in the Microsoft TechNet forum for more help on this issue.

  https://social.technet.Microsoft.com/forums/Windows/en/home?category=w7itpro

• Loading compatibility issues on Windows 7 tactical chess program

  I am trying to load tactics of chess for beginners on my laptop which has Windows 7. I know is works on Windows XP. Anyone know how I can fix the compatibility issue? The error message says "Run time error 216 at 00002DEO. Thank you.

  Hi Carrie,
  You can quickly determine what browser version by opening the browser by clicking on help and then on.
  Regarding the error, try this:
  http://support.Microsoft.com/kb/259279
  hope this helps,
  b Eddie

• Weird issues with Windows 7

  I had this problem come and go and have tried everything to resolve it. Icons of programs not loading and are rather empty. 'My computer' does not load anything either, it seems to be loading, but nothing ever shows up. Menus contextual (for files and folders) do not load and usually hang in the active Explorer window.

  Here are a few screenshots:

  My desktop (icons of empty program):
  http://PUU.sh/3SIAY

  IPL 'my computer ':
  http://PUU.sh/3SICb

  'My computer' after 10 minutes:
  http://PUU.sh/3SIOe

  Explore "games":
  http://PUU.sh/3SIV2.jpg

  Control Panel:
  http://PUU.sh/3SIWe.jpg

  "System call failure" after trying to open (computer/Control Panel / videos, etc.) in the start menu:
  http://PUU.sh/3SJgv.PNG

  What I tried:
  -Restarting my computer.
  -Breach of integrity system scanner.
  Virus/malware scan.
  -Clean start.
  -Provide the necessary services are active and running. (CPP, etc.)
  -Windows update.
  -Updated the drivers.
  -Troubleshooting.

  Someone at - it solutions to this problem?

  Thank you.

  I thought what is the problem. DllHost.exe and Acronis True Image 2013.

  I just disabled the two services, Acronis Nonstop Backup and synchronization of Acronis Agent, and now the issue is gone.