Prefer cable ethernet to WiFi?

Similar Questions

• Prefer the Ethernet to WiFi connection

  Hello

  I can't seem to find a solution to my problem (found this thread, but none of the suggestions work for me).
  My laptop is connected by ethernet to work. At the same time the Wifi is enabled (and I don't want to disable it through the HW switch for different reasons).
  I would like this (Professional) Win7 uses a lot more fast ethernet (1 Gbps) connection but he was always cheating to the Wifi (54Mbps).
  Maps and links, I put the connection to the Local network in the upper and lower is the wireless network connection.
  In Device Manager, I've set the speed & Duplex of Ethernet to 1.0 Gbps Full duplex
  I tried to set the ethernet to 10 metric and the metric of the Wifi adapter to a higher value (20-400).
  But none of this seems to work.
  As soon as I reconnect the WiFi via the HW switch, it will use this connection.
  Is there anything I can try to make this work?
  Or whatever it is that Microsoft is going to do to solve this problem?
  Any help will be greatly appreciated.

  Hello

  The question you posted would be better suited to Windows 7 IT pro community.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• I have Dell Inspiron, as soon as you unplug ethernet cable u losing WiFi connection

  Original title: used dell inspirion question

  Reference Dell inspirion when hardwhired is very well soon you unplug ethernet cable u lose wifi, I got the disc driver but not sure how get the correct file

  Hi Josephrabatie,

  ·         Did you do changes on the computer before the show?

  First of all, make sure that you have not activated the WiFi switch on the laptop. Check out the following articles for more information on the problems of network connection:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  Let us know if that helps.

• When connecting two books of Mac with Migration Wizard using a cable Ethernet 'right' or 'twisted '?

  Hello

  Soon I'll have a new Mac Book Pro, and I would try Migration Wizard but > > > > when connecting two books of Mac with Migration Wizard should I use a cable Ethernet 'right' or 'twisted '?

  You can use either; There is no advantage to one or the other specific.

  (144276)

• coaxial cable of the adapter cable ethernet to the airport

  where can I find a coaxial cable to the adapter cable ethernet to my Airport - have time warner line coming into the House but need to ethernet adapter to use the airport for router and modem

  Unfortunately, a co - ax for Ethernet card will not help you.

  The reason is that the Apple AirPort routers do not have a modem on board, you therefore need an external modem separated if you want the airport to be able to provide Internet access to clients connected.

  Co - ax cable connects the modem. Then he use an Ethernet cable to connect the modem to the "O" WAN port on the router from the airport.

  Check with Time Warner for recommended modems that are compatible with their service.

• Airport Time Capsule ethernet and WiFi installation

  I am trying to set up my home network, but also, somehow, the practice run for the configuration of my future business...

  Here is the component.

  -Modem: Fast 5250 BELL FIBE Home Hub 2000.

  -Airport Time Capsule 1 t (a big)

  -AirPort Extreme (large)

  -AirPort Express (size of the Apple TV)

  Here are the different coverage area and device usually used in the:

  -office: Printer via USB or ethernet, ethernet MacPro, 2xMacBookAir.

  -Living room: Smart TV, Apple TV2, PS4 (all via ethernet if possible) as well as a bunch of iOS devices and laptop computer via a Wi - Fi connection

  -In room: IOS, Apple TV via Wi - Fi device.

  So good, here's the catch, the modem's in the entry closet surrounded by concrete, so I close the Wi - Fi on it. Cable Ethernet running from there, at the office, upstairs room and the main living area. The plan was to put the TimeCapsule 1 t in the office, extreme in the living room and express on the floor. But I already have problems that they can't be all connect via Ethernet in the modem... Oh! What a mess, he made... So I saw on the support page from apple, is it better to put the airport Time capsule 1 t as principal to create the network. So if I put the Capsule in the closet as the main will be backup my stuff via ethernet?

  Also, I have the older version of Time Capsule (dish 500 GB). Shud I use it as the main airport will be connected to it via ethernet anyway?

  And finally, I connect to the modem using PPPoE bell hand and another airport the main via Bridge DHCP mode. Is this fair?

  Probably all covered already in other posts sorry if it is redundant. Thanks in advance for taking the time to help me.

  Probably all covered already in other posts sorry if it is redundant. Thanks in advance for taking the time to help me.

  You searched for other positions that have covered this slot a form or another? Maybe you should do that first.

  Base stations-Setting up from the airport and set up a network extended wireless (802.11n)

  Airport + Wi - Fi - Apple Support

  AirPort Utility 6.x - if your base station or Time Capsule is connected to a router providing NAT and...

  If you have documentation for your devices, then read it to see if it provides assistance. And don't overlook the help to the Finder or the Airport utility menu. If you're patient probably Bob Timmons found you your topic and help you. He is the resident expert.

• Networking will be faster if I turn on ethernet and wifi?

  Is my MacBook Pro (OS x version 10.11.2 (15 c 50) capable of firing party of ethernet and wifi at the same time, to increase network throughput?)

  N ° it is one or the other.

  Ciao.

• Ethernet and wifi not working not not on 1318ax g6

  Mr President, my laptop is HP 1318ax g6. When I buy this tour I have installed windows 7 but now format and install windows 8. But after installing the windows 8 port ethernet and wifi doesn't work. I download and install the drivers to recommend hp for win8, but it does not work. Please help me solve this problem.

  Hello:

  Here are links to drivers PCI and touchpad.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-110518-1&CC=US&DLC=en&LC=en&os=4132&Product=5278311&sw_lang=

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-110512-1&CC=US&DLC=en&LC=en&os=4132&Product=5278311&sw_lang=

  Unfortunately, I do not know why the wired network adapter does not work.

  I'll give this a try and if this driver does not work, so I have no idea why.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4132&swLang=13&mode=2&taskId=135&swItem=ob-110949-1

• [Help] No Ethernet or Wifi device found under Device Manager

  Hi all

  I recently bought a Dell Inspiron 15R N5520, and there is no device found under Device Manager ethernet or wifi.

  

  Can someone please advice how I could enable these?

  When I tried to install the driver the link Ethernet drivers Dell, the following error is displayed. I don't know how to handle this. Please advice ASAP.

  

  Concerning
  Guenoun

  Hi Rick,

  The seller had replaced the laptop and the new one works quite well. Thanks for your help!

  Concerning

  Guenoun

• New HP Envy M6 only detect ethernet cable, very slow wifi

  Hello

  Sometimes, the wifi, I get 1mpbs on a 50mpps connection. I'll upload to 5 Mbps, which is normal (but why are my download speeds so slow?) Laptops and other devices work perfectly. Closer to my wireless router (well it's not a router, it is a TG862 of Arris Comcast) seems to alleviate the problem, but... I am no farther than 25 feet away from him in my room!

  I tried to solve this problem by updating the BIOS and the driver Qualcomm Atheros 9485 and apparently not helped at all.

  My concern REALLY, it's THAT EVERYTHING, nothing happens when I plug my ethernet cable into the left side of my laptop. It is in the correct port. It works fine in my xbox, my other laptop and my desktop computer. Other ethernet cables do not work or the other. I noticed there are two holes (which resemble lights) that don't light up, right where I plug the Ethernet cable.

  http://support.HP.com/us-en/document/c03363657

  I followed these instructions piece by piece without success.

  Should I have a burst network card? Help, please! This notebook is so new and brilliant, my other is old and destroyed and won't even take a load! I greatly appreciate it.

  Michael Siraco

  Hello Dollarsignrack,

  You have a problem with your network connection.

  It could be a defective material you may be substituted.

  First, turn off the computer.
  That you put it on press the F10 key. This will load the BIOS setup utility.
  Press F9 to load the default values.
  Press F10 to save and exit.

  This should help to detect the Ethernet port.
  When the computer starts up, check if everything is working.

  If it is still slow to go to HP.com and update the BIOS and software framework.

  Here are links to the updates.

  BIOS

  Software structure

  If you do not need to have the unit repaired.

  Here is a link to the phone number that you can call to HP.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.

• Connecting to a Mac TC cable ethernet for external storage only

  I scoured these forums looking for a solution to my problem, but nothing I've met has worked so far.

  I have a TC of 2 TB.  I'm sure, it is considered as 2nd generation to 99%.  My Mac is a 21.5 mid-2011 "El Capitan running.

  What I'm trying to do is (should be) pretty simple, but I just cannot get this to work.  I live in the glue, so internet high speed cable is not available and I'm stuck with Verizon DSL via the telephone line.  Go ahead... Take minute for model / to feel sorry for me... I'll wait.  OK, so I have this DSL modem/router from Verizon Wireless and my TC does not seem to play well with it, when I joined the network.  Internet continues in and out and wireless file transfer is so slow.  So I would just remove my TC of the network, disable the wifi signal that he died, and connect to my Mac via the ethernet cable and use it strictly as an external hard drive for my media files.  Any help on how to do this would be appreciated.

  Go ahead... Take minute for model / to feel sorry for me

  I live in important suburb of Melbourne in Australia and count myself "LUCKY" to get DSL to about 6 Mbps, then you are the global average, I guess for internet.

  (Of course we have a Conservative Government... think Republican or Tory... whose the idea of fast internet is something from the years 1990) A conservative, he also seems = backward.

  I have a TC of 2 TB.  I'm 99% sure, it is considered as 2nd generation

  It's really unlikely... they sold a handful.

  Look on the bottom... paper A1409 label is gen4, molded into the first line of rubber... Gen3 is A1355... A1302 is Gen2 and extremely likely.

  So I would just remove my TC of the network, disable the wifi signal that he died, and connect to my Mac via the ethernet cable and use it strictly as an external hard drive for my media files.

  You can do this... * If you? *

  The method is here.

  Time Capsule using wired for Mac for backup only.

  It is a bit tricky because of the gateway and DNS issues.

  If you need more details give me a screenshot of your network on the Mac wireless connection.

  * If you *.

  A self powered 2 TB 2.5 "disk connected to the back of your Mac. will be invisible... it will be faster and much more reliable than the old TC.

  It will allow your local files not network... and therefore the time Machine will work... Time Machine backup impossible of network drives. It can use as the target source ever.

• Airport Express as a bridge for cable internet and wifi

  Hello

  My first post and I hope you can help, because I was not able to get a clear answer to my question, but it's perhaps easier to write

  I have an airport extreme for wifi, it's in a piece of my house. Airport extreme, I have an ethernet cable to my living room on the other side of my house. The cable is for my TV. The walls are solid, and I have only weak wifi in my living room. Therefore, I would like to connect an airport express (WAN port) to the cable in the living room, offering a better wifi, and I want to enjoy the internet connection cable between the LAN port in my TV

  the new airport express 802.11n, do the trick?

  Thank you

  Kris

  Yes. You would like to configure the Express to be in a roaming network configuration with your extreme. This would make the Express Ethernet active ports to support your TV.

• "Ethernet (or WiFi) not a valid IP configuration" error

  I have 4 volunteers helping to prepare tax returns. All use the same brand of laptop running Windows 7. Fine, but two two works cannot access an unsecured WiFi network (my Dell laptop running 8.1 Win don't.). Everything worked fine in the second week of March.  The two who fail with the above error message were not used between March 16-29.  (My old Vista has no problem either.)

  When trying to connect, WiFi is detected, but has a yellow shield on it, tag as secure sites, which we cannot access are not. When trying to connect to the WiFi, get the message that it takes too long to connect to the WiFi. Try Ethernet cable gives gives above error too. When troubleshooting, make a request for password and IP address?

  Finally, the laptops will connect so connected to the secure network.

  Help! We desperately need to have these two computers before Saturday. And I need to be able to use my laptop on the hotspots too.

  My guess is that there are a few updates driver in recent weeks. I'd appreciate any help.

  Thank you for your help. Many low-income taxpayers will be too grateful.

  BonsaiBill, the tax assistance for a few weeks.

  Hello BonsaiBill,

  Thank you for your response.

  Have you tried using the suggestions in other methods apart from method 1?

  Please refer to the suggestions of AkshaySachdeva responded on 26 February 2013 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/error-message-Ethernet-doesn

  Also, please use the suggestions provided in the following Help article and check if it helps.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  In addition, disable the antivirus software and check.
  Reference:
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps.

  Thank you

• With the help of TC as a bridge between the Linksys router.  TC will be connected by a cable ethernet to another building.  Will this work? Help.

  Need to get wireless to my workshop about 70 feet from the House.  Linksys router connect to the Hughes Net modem uses.  I have a new time Capsule I would like to set up in the workshop.  I have an ethernet cable from my house to the workshop.  (Had bad lighting storm last week and knocked out two Linksys routers.  TVs all otherwise not serious!  Need help, TC inlays.

  Connect the ethernet to the WAN port on the TC and just run the configuration wizard utility airport... it should automatically configure the TC correctly... Have you already tried that and it didn't... If so the TC attached as well during the storm because it can damage the ethernet ports.

• is it possible to combine ethernet and wifi connections to use both at the same time

  I want to fill the two connections without using third-party software can do this combine is wifi and ethernet, all use both faster speeds for

  Ethernet is the fastest connection to use your modem/router and it will not combine or run them both at the same time.

  To test your speed, try > http://www.speedtest.net/

  or > https://www.speakeasy.net/speedtest/http://www.speedtest.net/

  If you are unhappy with the speed of your ISP, you need to communicate with them or another ISP.