Preload with our mobile devices drive

Similar Questions

• Failed to install MS Active Synch 4.5 on MS Vista... Windows Mobile Device Driver 6.1 Unable to Synch with Verizon phone.

  Failed to install MS Active Synch 4.5 on MS Vista... Windows Mobile Device Driver 6.1 Unable to Synch with Verizon phone

  I have no way to sync my phone to my computer.

  Phone Verizon is SMT5800

  Hi RickdeSante,

  Please see what follows, a possible fix for your problem

  Try to uncheck advanced network functionality

  To disable this setting on a Windows Mobile-based Smartphone device or a Windows Mobile Standard device, follow these steps:

  1. Click Start, click settings, click more, and then click data connections.
  2. Click on USB to the PC.

     Note You may have to click more to display the USB to PC setting.

  3. Click to uncheck the enable advanced network functionality check box.

  Thanks to Jack in the following thread:

  http://social.answers.Microsoft.com/forums/en/windowsmobileactivesync/thread/ee798d80-1A1E-4BA0-8787-adcac2034138

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows XP "Apple Mobile Device Driver not installed not" device need driver mobile HELP running XP service pack 3 using an iphone 4

  Problems with the iphone 4 who it says in itunes that "Apple Mobile Device Driver not found" and nothing happens when it is connected to the USB port on charge even not. Running Windows XP 32-bit with Service Pack 3. but think I deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers. Apple went through just fine and everything is OK it is a problem of PC and XP. Microsoft help put me on this site because need to know how to solve this problem I hope that somewhere there are mobile device drivers that work with the iphone? Site Internet de Microsft has 5 mobile device for Windows 7 drivers, but not for XP. Need help!

  Apple went through just fine and everything is OK it is a problem of PC and XP.

  Evasive classic.  It's always the problem of the other guy.

  And the classic response of some evil-educated person "technical support":

  Microsoft help put me on this site

  If the error message says 'Mobile Apple Device not found Driver' then it's an Apple problem, pure and simple.  The device driver mobile for the iPhone comes from Apple, not Microsoft.

  Do you remember what you were doing when you "deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers?"

  Probably not... and you have not explained what has been included in "Apple went through everything."  It is time to start over by removing everything related to Apple and then put it back correctly.

  First, however, the fact that the iPhone does not load even when connected to a USB port is a bit worrying.  Works in everything else in this USB port (for example, a USB flash drive)?

  Have you tried all the USB ports on your computer?  Take a look in the Device Manager (start > run > devmgmt.msc > OK) and see if there are any icons showing warning.  If so, double-click on the entry and information "device status".

  Take a look at the event viewer (start > run > eventvwr > OK).  There is no need to go far.  Connect your iPhone, then look at the newspapers (System and Application) for since a few minutes see if there are any errors or warnings.  If so, double-click on it to get the event properties window, and then click the "Copy" icon (just below of the)

  Have you tried to recharge the iPhone using the adapter connected to Apple's USB cable?  Does it work?

  Have you tried to connect the iPhone to another computer?  With what results?

  Assuming that the hardware (iPhone, USB cable, and USB ports on your computer) is not working properly, see the following topics.

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.

  Warning: uninstall utility for cleaning Windows mentioned in the instructions below has been removed from Microsoft download servers because sometimes it seems more removed he was supposed to (I think that this phenomenon was linked to the bureau uninstalls).  You can still get utility Windows Installer Cleanup--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html here is a free alternative Revo Uninstaller. Before using these cleaning products, you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  Go to control panel > Add/Remove programs
  Remove these applications:
  1 Apple Software Update
  2. Apple Mobile Device Support
  3 Hello
  4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
  5 iTunes
  6 QuickTime

  Open my computer > C: > Program Files
  Delete this files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  Download & install the Windows Installer Cleanup utility: [see note above regarding cleanup utility]
  http://support.Microsoft.com/kb/290301/
  Launch the utility: start > programs > Windows Installer Clean Up
  Select one of the applications mentioned above and click on remove

  Restart the computer
  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

• Possible to use USB with ADF Mobile devices

  Hi guys,.

  I have found a few reader (include chip) chip card that works with a mobile device through their ports (port 30 pins, micro usb) in mobile native development(iOS/Android)

  but I want to know can be used with ADF Mobile as we Smartcard reader SDK JAR that working in the 1.4 jvm that I'm not sure on the support of usb-host function in ADF Mobile.

  Thank you.

  Hello.

  In the current version, the only way to get what you want is to build your own plugin of Cordova. This means that you will need to write native Android and iOS code to interact with the device, but also a JavaScript wrapper that will expose your API to Mobile ADF application. You can find more information in the Documentation of the API Apache Cordova.

  Best regards

  Frédéric Desbiens.

• Download and install the sub for the Apple mobile device driver

  iTunes does not recognize my iPad when it's connected to the laptop.

  using Windows 10

  Device Manager

  USB Bus controllers

  not "Apple mobile device void driver" installed.

  How can I install this?

  Try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Universal Serial Bus Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  Or try the iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  TT2

• Problem connecting Bluetooth with Windows Mobile Device Center

  Hello

  I have and HTC Snap with WM 6.1 I want to connect to my Satellite P500 running Windows 7 to be able to move the files by using Windows Mobile Device Center.

  I know that this device can talk to this laptop via bluetooth, because there are some utilities bluetooth Toshiba that I can use to get a connection.

  However, even if the Toshiba utility recognizes my bluetooth device, but WMDC is not. WMDC recognises my device when it is connected with a USB cable.

  I don't know about the drvupdate-amd64 download which I think is necessary with WMDC but when I run what it looks like all it does is try to install a device driver for a device that is 'unknown '. I get a message at the end that driver could not be installed.

  I have run out of ideas on how to get these things to work. Someone at - it a similar experience?

  Could this be a problem of COM port? My Bluetooth device to 40 com affected Toshiba stack I don't see a COM 40 in the WMDC, just a port identified as "Bluetooth" settings

  Post edited by: t5247rb

  Hello

  This page of Toshiba Bluetooth may be able to help you;
  http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTO

  Here are very interesting HowTo documents;
  In your case I recommend that you check the docs:

  + How do I set up a connection from the PDA (Windows Mobile 6) to the Windows Mobile Device Center.

  and

  + How to connect PC to internet via Bluetooth using a Windows Mobile 6 phone +.

  Welcome them

• Error with Windows Mobile Device Center: there is no email...

  Hello

  I have been searching on the internet and do not yet have a solution to my problem. I have a handheld device that I need to use Windows Mobile Device Center to synchronize a program for my work. I get the following error, that I have to then click ok, just so that I can connect and then synchronize my handheld computer to work. The error is:

  There is no associated messaging program to perform the requested action. Install an e-mail program or, if such is already installed, create an association in the default programs control panel.

  I have Windows 7 64 bit and I have Thunderbird and Windows Live Mail (that I tried as default, nothing is done). I don't have Outlook and will not buy it just for this error. Help please!

  Thank you!

  Hello

  You did material recent or changes to software on your computer before this problem?

   

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

  Step 1: To disable this message on your PC, you deceive MAPI using your default provider. To do this, use the following steps (based on the informationto Microsoft KB 315458. There is alsomore information available here).

  a. start regedit as an administrator by typing "regedit" in your Start menu.

  b. right-click the programregedit and chooserun as administrator

  c. navigate toHKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail\Windows Live Mail*.

  d. double-click the value of path of DLL and copy the data from the value to the Clipboard, and then click Cancel.
  On my system, this is C:\Program Files\Windows Live\Mail\smapi.dll

  e. right click on an area empty below the DLLPath value and choosenew , thenexpandable string value in the menu.

  f. typeDLLPathEx value new name.

  g. double-click the DllPathEx value, and then paste it into the value from the previous step.

  h. you may also set the default value toHKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail toWindows Live Mail

  * 64-bit complicates by redirecting the key registry, so on a 64-bit Windows version, look underHKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Clients\Mail

  Step 2: Delete the MSMapiApps::WmdHost.exe registry key and restart the computer.

  The location is here:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows messaging Subsystem\MSMapiApps:WmdHost.exe

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Problem with Apple Mobile Device Support in Windows 7

  I can't install Apple Mobile Device support.

  I uninstalled all the components of iTunes, in the order suggested by the apple support.

  Apple Mobile Device support is not there - it does not appear as a program to uninstall; There no folders or files in Program Files (x 86) for her.

  iTunes works, but when I try to connect an iPad or an iPod, he said simply that the amendments are expired, uninstall and reinstall (actually that is not there, and still less to day).

  Then, when I try to reinstall iTunes, running as an administrator in an environment of clean boot, he goes through many steps.

  During installation, I can see it attack the AMDS, it copies the files and the green bar fills gradually until the end, he stops and poster "backward", the green bar go gradually back to nothing. It is then with all the other components and so-called ends successfully. But the amendments is still not there.

  The only place where I can find mention of AMDS is that if I look at services in the Task Manager windows - AMDS appears in the list even after all is uninstalled. Even if it is listed, it is not running as I put it to stop and it is disabled at startup.  None of the other components appear on my list of services when I uninstalled iTunes.

  I think that the amendments was not completely uninstalled, and there is somewhere that says that the iTunes install do not to install as a component somehing. AMDS always seems to be hiding somewhere, but I'm at a loss to know where or how to delete it.

  Any help would be welcome.

  You should ask in the forums of Apple. You can Google for the URL.

• WebWorks App must call the browser with our mobile site URL

  Hello guys,.

  Please help me with this simple question:

  I need a 10 BB app that would invoke the browser with the URL of our mobile site (HTTPs-password - protected).

  So it's a very simple process:
  1. start the application
  2. application displays the mobile Web site

  Thank you very much!

  PS: Optional Question: is it possible to keep the navigation bar of the browser on the bottom of the screen?

  You can do this by simply using a config.xml file, an icon and nothing else

  Something along the lines of...

  
  http://www.w3.org/ns/widgets"
          xmlns:rim="http://www.blackberry.com/ns/widgets"
          version="1.0.0.0" id="com.mysite.wwapp" xml:lang="en">
  
      http://www.mysite.com">You
      MySite
      
      
      My Website
  
  
  

  There is no navigation of the browser at all well and the site would need set the

• How many photos can be shared with my mobile device?

  Am I limited to 2 GB of data shared to send to my mobile device

  You should find the forum for any product it is and post your questions there.

  Here is a link to a page that provides links to all of the Adobe forums...

  The Forum links page: https://forums.adobe.com/welcome

• Windows Mobile Device Center 6.1 compatibility with Windows 7

  Hello

  I use Microsoft Windows Mobile Device Center 6.1 to connect my Windows 7 PC with a Mobile of Motorola device. But the files do not pass. The process even when I tried Windows XP with ActiveSync, it worked perfectly.

  I'm not sure whether "Microsoft Windows Mobile Device Center 6.1" is compatible with Windows 7.

  Can someone tell me if "Microsoft Windows Mobile Device Center 6.1" is compatible with Windows 7?
  

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand you have questions using the Windows Mobile Device Center 6.1.

  To help you more accurately, I need more information.

   
  (1) what happens when you try to transfer files?

  (2) use a windows 7 32-bit or 64-bit windows 7?

   

  In fact, I would like to inform you that the Microsoft Windows Mobile Device Center 6.1 is compatible for windows 7 64 bit.

  Method 1: first of all, try to go to the link below and see if that helps.

  Microsoft Windows Mobile Device Center 6.1 for Windows Vista (64-bit) driver
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=3182

  See the article for more information:
  
  Description of Windows Mobile Device Center
  http://support.Microsoft.com/kb/931937/en-us

  Synchronize music, photos, contacts, and calendars with a mobile device
  http://Windows.Microsoft.com/en-us/Windows7/sync-music-pictures-contacts-and-calendars-with-a-mobile-device

  What is Sync Center?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-Sync-Center

  I hope that helps if not please write back and we will be happy to help you again.

  Thank you

• audio preload in mobile devices

  Hello

  I have an animation, where it is important to have a few short audios on loan.

  I know that the 'audio Preload option' is not supported by most mobile devices.

  Work near that I tried to define the 'MuteAll' and then let him play this audio and later on the set all the audios for now = 0, then on 'MuteAll', 'false. '

  But is there an easier way to force an audio (or any other file) to load?

  Jürg

  You fight with an operating system level restriction put in place so that people don't get mad at their mobile data plans. I think that the last answer here is to solve by the diversion of any kind of click / touch, the user can do to your animation http://stackoverflow.com/questions/21738979/preloading-audio-on-mobile-devices

• How would I go about installing device driver USB mobile Apple who is missing after upgrading to the latest version of iTunes? I use Windows 10. Thank you.

  There are some days that I installed the latest version of iTunes. I've also updated my iPad 2 and iPhone 4 iOs 9.3 sec. Now I can not activate the iPad and iTunes on my PC does not show the iPad, or iPhone. I've gathered that the Apple mobile device driver is missing, but don't know how to install it. Any help?

  Maybe isn't a driver problem.

  Help here > How to restart the Service Apple Mobile Device (AMDS) on Windows

• Sizing when displaying questions size with mobile device

  I have problems with Muse resizing my site when it is used with a mobile device. He cut the left and right sides for some reason any and I do not know the reason.

  Here's how it should look like the base normally. It is at a resolution of 1024 x 786

  

  This is what it looks like on my iPhone 5 (note that cut the sides) -here, any help would be GREATLY appreciated. Thank you guys!

  

  The cause of this is because your content is located beyond the left edge and right side of the page in Muse. Please see screenshot below.

  

  See you soon,.

  Vikas

• USB device driver

  I deleted Apple Mobile Device USB driver on my Windows 10 machine with the intention to reinstall. How can I find the installation package for the Apple Mobile device driver?

  Thank you

  Dave in STL

  Apple Mobile Device USB Driver missing

  and maybe:

  http://www.technipages.com/iTunes-fix-iPhone-or-iPod-not-detected-in-Windows