Preloader does not not on the second click?

Similar Questions

• TECRA 8200 does not recognize the second module memory

  Hi, I have a problem with one of the TECRA 8200. The machine only recognizes the first module and not the second 128 M I tried form to upgrade memory up to 256 M. module is compatible because it works without problem with an other TECRA 8200!

  I updated the bios to version 1.6 but there is no way: the PC does not recognize the second module!

  What can I do?

  Hello

  Perhaps is the second memory slot is faulty. Put this add-on in the first slot and check again.

• HP 6120 t BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller

  Hello

  HP 6120 t (vista) BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller. The other SATA disk and the DVD player came with the machine.

  I hooked my old 200 GB Hitachi drive via the controller. I also put the jumbers in the present as a slave. I also took the original WD drive and just connect the IDE hard drive. BIOS do not show any drive at all.

  I would try something possible at this time I have a lot of my data on the old disk.

  Thanks appreciate any suggestion.

  Try to enter the BIOS and I believe under change of Advanced menu of SATA to IDE or Enhanced.

  You need to do when you install Windows XP or you will get a blue screen and it does not start.

  Don't forget chang back when you put it in your drive home hard sata.

• Win XP does not recognize the second disk in the Qosmio F30

  Hello.

  You have a problem...
  After using the recovery disk WinXP MCE does not recognize! second HARD drive.

  I mean in the Device Manager it's ok I see 2 hdd... but in his only C:\ Explorer

  Utilits RAID recognize also second HARD drive.
  But I'm going to use this HARD drive not for mirorring... I need this second HARD drive as separate HARD drive.

  Could someone help me solve this problem?

  Just format the drive and make it ready for Windows to use.
  Go to control panel-> administration-> computer management tools-> Storage-> disk management

  Here you will find all the options necessary to make your second HARD drive in Windows.

• My computer does not detect the second monitor

  I just bought another monitor for my PC. My first monitor is plugged into one of the two VGA connectors at the back of the computer, and my second monitor is plugged into the second slot VGA. However, when I try to detect the second monitor does not work, and he thinks that a monitor is connected. Thanks for any help!

  Hello

  Power Off the Computer and then plug in the monitor.

  How to set up dual monitors in Windows 7
  http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/

  Two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Tutorial: How to set up two monitors (Windows) - video
  http://www.YouTube.com/watch?v=YFCpaAs5s3c

  How to set up multiple monitors
  http://www.PCWorld.com/article/157672/how_to_set_up_multiple_monitors.html

  ==================================

  You may need to update your display and video driver

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 13 Alienware does not recognize the second ssd m2

  I just installed an ssd in m.2 ADATA in the second slot, and while the drive appears in the bios and in intel rapid storage app it does not appear in windows as a usable drive.  What I understand is the original ssd in the 'c' drive and I it does not show as a "d" or any other player.  He also appears in Device Manager as well.  What should I do to make it appear as drive "d".

  Thank you!

  Sounds like it needs to be initialized and formatted in Windows:

  http://www.overclock.NET/t/1227647/how-to-initialize-and-format-a-new-disk-for-use-in-Windows

• In the form of domain information does not, unless the user clicks on the field?

  Hello

  I got PDFs with form fields that contain text. In the past, all the text is visible and if more text is in the more visible area, you get the scroll bar.

  The last document I received, the text does not appear, until I actually click the biox field. Once I click on the field, the text and the scroll bar appear, but once I click it disappears again? We cannot understand why?

  Anyone know how or why this happened and what is the solution?

  Thank you!!

  Babs

  This works because it gets Acrobat to redesign the appearance of the field, which is the problem. Preview does not correctly save the PDF file and field appearances can get damaged. Importing data in causes Acrobat to redesign the field, partially correct things.

• iframe to open the pdf on the website does not work the second time

  On my site, I use < iframe > to open the pdf in the page.

  All the links work the first time.  But if I want to choose another, nothing happens.  If I refresh the page, it turns off, then will work once again.

  I've read a lot of old post, but couldn't find a solution or work around.  Any ideas?

  Or, if it does not, then I opened it with the bookmarks already open?  Then I shouldn't be the submenu nav for each chapter.  Afraid users wouldn't know how to open the bookmark on their own.

  This is for IE.  Help, please.

  Here are some of my code

  < ul class = "" >

  " < li > < a href =" http://sharepointFiles.PDF "target ="myIframe"> REGISTER < /a > < /li > "

  " < li > < a href =" http://sharepointFiles.PDF#page=5 "target = 'myIframe' > NEW LAYOUT < /a > < /li > "

  " < li > < a href =" http://sharepoinFiles.PDF#page=7 "target ="myIframe"> < /a > < /li > DROP market "

  " < li > < a href =" http://sharepointFiles.PDF#page=9 "target = 'myIframe' > new PRICE < /a > < /li > "

  " < li > < a href =" http://sharepointFiles.PDF#page=11 "target ="myIframe"> ADDITIONAL INFORMATION REQUEST < /a > < /li > "

  < /ul >

  < div class = "w3-show" >

  < iframe src = "#" name = "myIframe" style = "width: 718px;" height: 900px; "frameBorder ="0"> < / iframe >

  < / div >

  An "iframe" isn't a product, it is a type of HTML element used to incorporate another document within a web page.

  The OP is using Adobe software, most likely, or Open PDF settings would not work for them all the...

  To answer the question: he is probably the way the file is cached by the browser. I don't know there are many, you can about this, but you can tell the Bookmarks panel to appear by default using two ways: you can use the "pagemode = bookmarks' open parameter in the URL, or you can set options for initial view of the PDF file itself to show (under file - properties - view initial - tab Navigation).

• Dose of Photoshop does not meet the first click

  My problem with the PS is, if I want to use a tool it dose not work on the first click. If I click on the screen with the lasso tool or brush etc... It dose not work the first time. I have to click again to make it work. It's like Photoshop forget I am using the program then needs to be awakened by clicking once before he started working. It's really annoying because it creates a feeling of lag or collage. Dose - anyone have any suggestions? Help - sticky buttons

  
  

  I am running

  CS5

  on a Mac book pro

  8 GB 1067 MHz DDR3

  Intel Core i7 2.66 GHz

  10.9.5 OSX
  

  CS 5 is no longer supported in this version of the OS.

  There is no doubt the OS operating system calls that are confused PS CS 5

  Time to update if you wish to continue using the OS 10.9.5

• Satellite A100-289 - does not accept the second module RAM

  Hello
  Sorry for my bad English

  I have a problem with my RAM secend slot. At the first bank i installt 1 GB 533 MHz DDR2 RAM in the second Bank too. The laptop starts but when I installed the second RAM after the BIOS Windows screen accepts 2 GB of RAM.

  [PC-information]
  Modellname Satellite A100
  TEILENUMMER PSAA9E-11H047GR
  Serial number 96304832Q
  BS-Version Microsoft Windows XP Professional 5.1.2600 Service Pack 3
  BIOS 6.00 version
  Processor Intel (r) Core (TM) 2 CPU T5500 @ 1.66 GHz

  Hello

  > but when I installed the second RAM after the BIOS Windows screen accept 2 GB of RAM.
  This means that you install RAM modules while the laptop is running?
  I m wondering your laptop still works. Normally, you could destroy the whole motherboard and the module.

  Anyway, to me it sounds like that your laptop isn't compatible with the memory modules vive. What modules do you have exactly?
  I have good experiences with the Kingston modules.

• Is there a bug in 9 Captivate, which does not recognize the click of the mouse for the title text?  Mac question

  I just installed 9 Captivate on my Mac, and it does not recognize the double click of the mouse to enter text in a title area.  Subtitle text works, but the text is not title.  I work in a reactive mode.

  Hi rayhoskins,

  We have not encountered such a problem. Can you please clear Captivate preferences and try again. .

  Captivate preferences can be erased by double-clicking the following file: Applications\Adobe Captivaate 9\utils\ClearPreferencesMac

  If you still face the issue please provide the Machine config?

  -Derrick

  Captivate the engineering team

• OfficeJet Pro 8600 does not recognize the 2nd paper tray

  I've set up the 2nd tray in system preferences by checking the box for an additional tray, although it seems sometimes to uncheck because when I go back to it is checked, it is not. Somewhere I found the Source setting and I saw 2 trays, but now I don't remember where it was to check again. However, when I try to use the parameters to define a default tray and lock in the status bar on the printer itself, it simply does not list the second set as being there. So there is nothing to choose or define. At one point, even though I didn't click to print, it seemed as if he was going to print something but then says there is more paper in the tray. But there was.

  I am on an iMac 10.8.5 OS and just bought this printer. I connected with ethernet.

  Hello

  I ask you to try the procedure described in the following link:

  http://support.HP.com/us-en/document/c03160525

  Although I am an employee of HP, I speak for myself and not for HP.

  　

  Say thank you by clicking on the "Bravo!" Star"who is on the left
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem

  　

  Kind regards

  Ray

• My preloader does not appear on-screen Flash3 AS2

  I have a preloader in fist of my film. My film has kid films (photo galleries). Here is the swf files that are related to the main sequence. When I simulate the download, the preloader does not show the fist of 50% load time. Then it comes and works very well. I went the charger in the library. Under links, I clicked EXPORT and uncheked "export in first frame". It did not work. I still have the same problem. Can someone help me. I use Flash 3 Action Script 2
  
  In addition, when I simulate my photo galleries that are related to the main loading sequence are not displayed. This is the code that I use for the preloader:
  
  Stop();
  LoaderInt is setInterval (toolbar, 10);.
  toolbar function () {}
  {if (getBytesLoaded () > = {getBytesTotal())}
  Play();
  clearInterval (LoaderInt);
  }
  fill_MC._xscale = (getBytesLoaded () /getBytesTotal () * 100);
  }
  
  What I am doing wrong?
  Thanks for any help you can give me. I'd really appreciate it.

  Post edited by: Nununa

  Are you asking why your preloader starts at 5%?

  (if so, years: because you have an integrated police - possibly in percentInst - you always export something in frame 1 or objects in frame 1 of your swf file are about 5% of your total swf)

• Problems with the .exe file programs + System Restore does not respond when you click

  I have Windows Vista. This problem started a week ago. I tried at first to use my "ccleraner" already installed, but this program does not open when you click on it. I was asked to choose the program that the application to use to open it. This has also happened when clicking on itunes. My avast program when you click also asked which application is required to open it. When it finally scanned my system it does no propblems. In addition, I tried to turn on windows defendrer as he told me that it was off. Clicked on 'Turn on..' and nothing happened. Help!

  Hello

  See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now), then
  Double-click it and run it like this. You can rename it back later. Do the same with others
  programs as needed. Use this method for other necessary - DO NOT ASSUMER one
  program removes all or that there is no other malware.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  There are MANY varieties of these with many names, but all can be eliminated with the same methods:
  
  Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
  scams to get you to pay for them while they have no advantage at all.

  How to remove all THE varieties of this malware - please read carefully the removal Instructions.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
  in the regular when windows you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
  UnHackMe execution)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
  taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• JavaScript does not unless the user double-clicks

  I'm working on a redesign of a site. On the FAQ page, there is a javascript script. You are supposed to click on the Q to reaveal has. On the dev site, you have to doubleclick. This is false.

  Here is the page in development:

  http://mayakaimal.com/mayakaimal2/about-FAQ.html

  It works on the old site:

  http://mayakaimal.com/FAQ.html

  Any idea is appreciated.

  MOOKIE

  This is because on the dev site hidden answers have all received an Afaq class that has css display: none which hides all the answers on the loading of the page. While the other site there is no class on the div of answers, but the answers have an inline style to hide.

  The javascript works by changing the style inline the div to answer... the first time on the dev site it does not find any inline style therefore defines some to display none, while on the second click it starts working again!

  so the easiest solution would be either to modify the javascript code to change the css class, or to remove the class and add a style inline like on the online site.

  Compare the two sites with a tool like firebug for firefox and you should see the difference in the HTML markup and javascript by changing the inline style.

  Jeff Logan Web solutions

  http://Twitter.com/JeffLogan_WS