13 Alienware does not recognize the second ssd m2

Similar Questions

• TECRA 8200 does not recognize the second module memory

  Hi, I have a problem with one of the TECRA 8200. The machine only recognizes the first module and not the second 128 M I tried form to upgrade memory up to 256 M. module is compatible because it works without problem with an other TECRA 8200!

  I updated the bios to version 1.6 but there is no way: the PC does not recognize the second module!

  What can I do?

  Hello

  Perhaps is the second memory slot is faulty. Put this add-on in the first slot and check again.

• HP 6120 t BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller

  Hello

  HP 6120 t (vista) BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller. The other SATA disk and the DVD player came with the machine.

  I hooked my old 200 GB Hitachi drive via the controller. I also put the jumbers in the present as a slave. I also took the original WD drive and just connect the IDE hard drive. BIOS do not show any drive at all.

  I would try something possible at this time I have a lot of my data on the old disk.

  Thanks appreciate any suggestion.

  Try to enter the BIOS and I believe under change of Advanced menu of SATA to IDE or Enhanced.

  You need to do when you install Windows XP or you will get a blue screen and it does not start.

  Don't forget chang back when you put it in your drive home hard sata.

• Satellite M50-A-110 does not recognize the new SSD?

  Hello

  I bought the M50-A-110 model and tried to replace the HARD drive by a Pro 840 Samsung SSD. The laptop does not recognize the SSD drive, so I sent him to the local Toshiba service for inspection.

  They discovered that the laptop does not recognize ALL of the latest SSD (they tried to Samsun, Intel, Crucial, Kingston and SSD Seagate). They checked, and I possible newer BIOS, so this isn't a problem, and the SSD worked fine on other computers.

  Someone knows how to solve this mess?
  Toshiba has a BIOS beta I could try?
  Any other ideas would be welcome.

  As a user of long date Toshiba, I must say that I am a little disappointed. I mean I work in it, and this is the first time that something like this happened to me with a new product.

  Hello

  I can't believe that Satellite M50 - A can not handle any of the mentioned SSDS.

  I upgraded my Toshiba laptop with SSD Pro 840. But before I did, the update of the firmware of SSD was necessary. Before the firmware update, the SSD has failed, after the firmware update, BIOS can handle the SSD.

  I would recommend to check the SSD for the firmware update!

• Win XP does not recognize the second disk in the Qosmio F30

  Hello.

  You have a problem...
  After using the recovery disk WinXP MCE does not recognize! second HARD drive.

  I mean in the Device Manager it's ok I see 2 hdd... but in his only C:\ Explorer

  Utilits RAID recognize also second HARD drive.
  But I'm going to use this HARD drive not for mirorring... I need this second HARD drive as separate HARD drive.

  Could someone help me solve this problem?

  Just format the drive and make it ready for Windows to use.
  Go to control panel-> administration-> computer management tools-> Storage-> disk management

  Here you will find all the options necessary to make your second HARD drive in Windows.

• MacBook Pro 2010 does not recognize the (formatted) SSD

  Hello

  I saw a lot of topics on it and did some background reading. But in short, a 13 "middle MBP 2010 is simply show folder-question mark icon when starting after having inserted a 850 EVO Samsung newly formatted (option + cmd + r to try to start internet recovery mode and do a clean install of holding).

  I tried to solve problems using other my Macbook Pro (a model 15 mid-2010 ")-Exchange the SSD back between the two machines, and I get different behavior which is what is so confusing.

  The steps I have taken to date include:

  -Insert the (unformatted) SSD in 13 "MBP. Hold down cmd + option + r download icon question mark.

  -Insert the (unformatted) SSD in MBP 15 ". Hold down cmd + option + r. get starts in the recovery of the internet where I could format the drive!

  -Replace the (newly formatted) SSD in 13 ". Hold down cmd + option + r. Yet once the icon question mark.

  To make sure that I was not screw up internals I put the old hard drive back in 13 "and he started very well. It's a relief at least.

  So I'm at this stage. Someone please correct me if my reasoning is wrong...

  -He's not the SSD because my model 15 "it recognizes and plays well.

  -It has No internal features of the computer, because it always starts on the old HD when I reinserted it.

  -He could be the SATA cable. (I tried to change place than my 15 "model, but the orientation is different and I didn't take the risk of rupture of the cable).

  -It could be a PEBKAC

  In the meantime I'll install a clean version on the operating system on the new drive while it is in the MBP 15 "work. Then, I'll try once more. But I don't hold any hope as the 13 "MBP doesn't recognize the SSD when would be the model 15".

  This is the model 13 '

  Thisis the model 15 "

  Any help at all is greatly appreciated. Thanks in advance!

  You probably replace the SATA cable in the MBP 13 ".  This phenomenon has been reported several times on these forums.  An SSD will start the MBP externally but not internally, and the original HARD drive will start the MBP even internally.  A new SATA cable solved the problem.

  I do not offer a 100% guarantee, but I suspect that the chances are good.

  Ciao.

• Aspire One d255 does not recognize the usb connected external ssd drive

  I want to replace the original HDD 160 GB with a 120 GB Samsung ssd 750 evo but bios and win 10 does not recognize the ssd drive as an external drive connected via a usb connection, so I couldn't create an image of my internal hard drive.  Is there a way to clone my hard drive SSD, so I can exchange the disc later?  I need to update the bios, install a missing driver, etc. ?

  I used two different connections: one is a 2.5 "SATA case disc that I used with a disk 2.5" HARD and works very well with the HARD drive and the other is SATA/IDE connector combination with cables for SATA and power and none of these works.  I read in another forum during my research that the Aspire One d255 doesn't recognize any external SSD connected through a USB either.  Since my netbook has no data, and I had just a pure 10 Windows installed on his drive HARD internal, I removed the 160 GB HARD drive and replaced by a 120 GB SSD and installed another Windows own 10.  It worked and my system boots now in less than 20 seconds.   We can close this thread now since I now have a faster machine fully function.  Thank you!

• MacBook does not recognize the SSD.

  Hello

  I would like to replace my HDD on my MacBookPro (13 "/ Mid 2010/ElCapitan") with an SSD. I bought a SanDisk card Ultra II 480 GB SSD and SATA to USB cable (this:http://www.ebay.co.uk/itm/251800670431?_trksid=p2057872.m2749.l2649&ssPageName=S % 3AMEBIDX % 3AIT TRK).

  I wanted to connect the SSD drive, format, make a copy of my HDD with SuperDuper! and change the part. But seems that my MBP does not recognize the SSD! I can't see it in disk utility, or in the office.

  What I am doing wrong?

  Thanks in advance.

  How have you plugged the SSD drive?  It is installed internally or externally via USB?

  Ciao.

• I have a problem loading Illustrator CS4 on a second computer (laptop). It does not recognize the number, saying: it is not valid. [was: ochre]

  I have a problem loading Illustrator CS4 on a second computer (laptop). It does not recognize the number, saying: it is not valid. Any suggestions on how to have the serial number recognized would be appreciated.

  Please see: error of incorrect serial number

  I hope this helps.

  Concerning

  Megha Rawat

• Siri does not recognize the voice.

  My Apple TV remote Siri works fine, but only of Siri does not recognize the voice. I just bought last month. No gross State aid.

  Are you pressing the button of Siri (micro) when you talk?

  Have you enabled Siri in settings > general > Siri?

  If so, then try a reset by unplugging the power cord for 30 seconds.

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

• HP Solution Center does not recognize the network printer

  Network has a hp 309 a printer, can print from the computer, the problem is:

  HP Solution Center not load-says incomplete installation.  If I plug in the USB cable and let it continue, it sets up a second printer that only works on the USB cable and it still does not recognize the network printer.

  Question how can I get the Hp solution program to reward the network printer.  If I reload the CD, then reinstall the will other people on the network of the problems?

  Resettlement on your machine won't affect only you, no other machines on the network.

• CD/DVD does not recognize the drive.

  CD/DVD does not recognize the drive.  Error message-"Insert a disk." "" "Insert a disk in the drive (E or F, depending on whether one in use).  I bought a DVD/CD thought exteranl today that might work.  Same error message with the external dvd/cd.  Can hear the disc turning when it is inserted during a short period of time, maybe 20 seconds, then it stops.  Sometimes, the disc is ejected when the error message appears, sometimes not.  Same results even with blank CDs.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Install Windows 8 does not recognize the system drive

  I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

  Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

  The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

  I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

  Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

  This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

  Thank you in advance for any assistance.

  Windows 8 Pro 64-bit (full version) - OEM
  Intel Core i5 - 3570K
  Card mother GIGABYTE GA-Z77X-UD5H
  Crucial Ballistix 2 x 8 GB DDR3 1600
  Crucial M4 2.5 "128 GB SSD (system disk)
  WD Green WD30EZRX x 4 (data readers) 3 TB drive
  Rosewill Challenger-U3 ATX Mid Tower Case
  SeaSonic M12II 620W 620 Bronze PSU
  ASUS DVD writer

  The DSS must be LOW LEVEL FORMATE.

  Once, there may be no other [HDDs] not connected to the SATA ports.

  Install Windows 8 Pro now.

  [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.

• Adobe InDesign does not recognize the fonts or characters in the character Panel Manager

  Hello

  I have Adobe Indesign CC (9.1.0.33) installed on my Mac Book Pro 2010, OSX10.8.4, with two user accounts in my main account ID (admin) works fine, no problem at all, if I connect to my account (not admin) second ID embarks, he posts two errors

  Adobe InDesign does not recognize fonts as a plug-in Manager.InDesignPlugin

  Adobe InDesign does not recognize the Panel.InDesignPlugin character as a plug-in

  I, repaired permissions, reinstalled ID, tried an admin disconnecting and logging in the second account, but the problem persists.

  could someone who has the slightest idea of what is happening maybe please notify.

  see you soon

  Kevin

  Hey Kevin,

  You can uninstall InDesign and you can check non installed in the Applications folder if a file for Adobe InDesign CC still exists. If so delete this folder manually and remove the trash.

  Install CC InDesign again. Do it from your administrator account.

  Thanks and greetings

  Javed