Premiere Pro 20141 made slower?

Similar Questions

• Premiere Pro performance suddenly slowed to be almost unusable, even for simple projects

  I'm running latest Premiere Pro update on a late 2013, 27 "iMac, with a processor 3,4 GHz Intel Core i5 with 8 GB of RAM, Mac osX version 10.9.5.  I know this isn't a lot of RAM, but until last week, or so I was able to amend a 4 K an hour with this configuration, as long as I ran the first session in resolution of 1/8.  He dropped some frames if I tried to play a long piece of it without stopping, but it is achievable for editing purposes.  But in the last days, the session has slowed to the point where he begins a picture of serious loss from the time I press play and is basically unusable.   He deposits also audio, and I can hear readers clicking frantically as soon as I touched the game.   My support is on 2-TB G - readers connected through USB3.

  What I've tried so far...

  -Ran the diagnostic on readers and it found no errors.

  -Tried to link the project the identical files on the backup drive.  The same problem.

  -I made that energy saver settings of my Mac have been fixed so that readers will never sleep.

  -J' deleted all media caches and the preview files of first that I could find.

  -J' I reset the privacy settings of Spotlight so that they index not only some folders on the internal drive and external drives.

  -J' made sure that I got to spend the maximum memory (6.5 GB) at first.

  -Finally updated my software to the latest version first.

  None of these things made the difference.

  - Then I thought that maybe the session came from is too big and bloated for my system to handle.   So I made a new project and import a simplified version of the only sequence that only refers to some of my files video color corrected.  This way I don't have to have an external drive connected and the session refers to much smaller files.  Still no improvement.

  -So, I tried an experience where I made a whole new project and sequence.  I imported only 5 video files in it.  The biggest file less than 3 GB.  (I do Protools editing on this computer with files much larger than this, on the same type of readers extermal, without any problem at all.)  With only a single 5 video (and audio) in the timeline panel, it always starts up frames after about 2 seconds.  If I put another clip of 5 seconds in the timeline, the abandonment of the frame gets twice as bad.  If I try to put a video on them crossfade, playback becomes jerky that is very bad.

  So basically, I started to be able to change a 60 minutes long 4K video project with video transitions, and multiple video and audio tracks.  (It was not perfect, but it is achievable).  And now all of a sudden, I can't play a whole new session which has 5 small video clips in there and not audio.    This isn't just my project or sequences that are the problem.  First just seems more to be able to access and read my media with any speed.

  What Miss me?  Can you give me some additional suggestions to try that I have already mentioned above?  (And Yes, I know that many of you guys probably consider my hardware configuration completely insufficient for what I do, and you're probably right.)  But it did work pretty well for me up to this point.  I'm so close to the end of my project and I'm really just trying to get back to functionality, that I had a week ago, so I can finish).

  I would like suggestions.  I feel like I'm running out of things to try.

  After a lot of troubleshooting, it seems that the problem is related to the corrected version of the color of my video not being able to reproduce quite quickly.  While my system had no problem with the camera raw 4K files, the number of colors increased color corrected Pro Res versions are just too much for my readers to read in real time, even at low resolution.   Unless I want to do considerable ameioration (which I did not), the solution is to keep my color corrected without video corrected colors stacked on each other in the timeline and to turn off the video track containing the color corrected ones.  Of course, I can turn the color corrected piece when I need to check something with it, but for the playback feature when editing, I'm limited to files camera raw.

  He is obviously an imperfect solution.  But because I'm basically done editing and just need to do some title and a small cut, I can finish the project works this way.

  By the way, technical support suggested major improvements to my memory and video cards.  But if I were to try to resolve this further, I would upgrade to a better system RAID before I would make additional upgrades on my mac.  It feels really more likely it is the main issue here.

• CC Adobe Premiere Pro export excruciatingly slow... Help, please?

  Hi guys, the project of a school in a few hours and I have struggled with premiere pro for nearly 15 hours on a 15 minute video. It's pretty basic, a few images and pictures in 1920 x 1080, but for the life of me will not export this thing. It starts very fast but slows to a crawl and then curls up and stops. My system is not pulling punches: i7, 3770 16 gb 1600 mhz ram, k-2 x 780 ti. Any suggestions? I'm dying here.

  Hey guys, thanks for all the help. I found the problem: Gaussian blur. I got a clip that was about 3 instances of Gaussian blur, adobe was very unhappy about it and refused to make this (even after a line of four hours , he was stuck). If someone experiences this problem, check if you have consciously or inadvertently stacked Gaussian blur.

• Premiere Pro: Bad made

  Hello

  I have a problem of rendering.

  My rendering window (pause mode en) does not offer a good return regardless of the format of the sequence (even in automatic selection according to a camera rush). See Figure 1

  The problem is spreading to the final rendering that has the same problem but only on some elements of the video (ex: insertion of a redimenssionnee in my main video video, or a PNG logo itself also redimenssionee) see Figure 2

  capture 1

  

  Capture 2

  

  Thanks in advance pay all the help you can give me

  Kind regards

  Darwin

  https://helpx.Adobe.com/Premiere-Pro/KB/Premiere-Pro-OSX-elcapitan.html

• Premiere Pro CS6 is slow, handling the AVCHD files

  Does adobe give downgrade you the right to use an earlier version. Have heard that there is no problem with Premiere Pro CS5.5 and X.V. files.

  If you convert m2v ACHD / wav files is all very well, but sometimes I want to edit files natively in HD.

  Thank you, David

  System:

  I5 3570 K

  Kingston HyperX 1600 MHz memory

  3 hard disks. Boot SSD, the video is 1 TB Seagate / 750 GB WD Black.

  EVGA nVIDIA 480 GTX using file text Hack for MPE.

  Best poster product related questions in the forum of products in question.

  Try http://forums.adobe.com/community/premiere/premierepro_current?view=discussions

• Where can I download Premiere Pro 20141 cc?

  How can I get the 20141 meadow cc pro?

  Post edited by: Kevin Monahan Reason: need a better title.

  You download the app 'Creative cloud', then, choose programs (including PrPro) you want to download. It does the job.

  Neil

• How can I go to Premiere Pro 8.0.0 8.0.1 without going to 8.1.0?

  I had recently updated to the latest version of Premiere Pro, 20141 version (which is the version 8.1.0). However, I need to ensure compatibility with used computers in my film production class, which are stuck to 8.0.1 for now. I was able to restore successfully 8.0.0 (the 2014 version) using the cloud manager creative and everything works well. However, I would like to upgrade to the 8.0.1 version so I can get the bug fixes that were included with the update. Saying Cloud Creative manager to update download 8.1.0 and I can't find anywhere to download 8.0.1 manually. Is it possible that I can do this?

  You can download the 8.0.1 update http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html (Windows).

• all of a sudden nychtemerales Flip does not work in Premiere Pro

  all of a sudden nychtemerales Flip does not work in Premiere Pro, but made vertical flip - how can I fix?

  a works wonderfully in the previous amendments of the same project - just happening today...

  Hi Clubmudge,

  Works fine for me. If you have already restarted your computer and Premiere Pro, you can try to reset the preferences. Let us know if it works for you.

  Thank you

  Kevin

• Premiere Pro CC (V.8.0) slow and crashes during playback

  Question:

  Premiere Pro CC (V.8.0) extremely slow and crashes during playback. My video will not play unless I make (which is not a problem). I made all my clips and try to read. It usually allow me to watch the first time around. After that, the program hangs or becomes extremely slow. I even had a blank green screen pop up on my screen. Sometimes, the program will generate the message "a serious error has occurred" and stop. Other times, the program just locks himself. I'm not under all programs except by email.

  Here is what I tried:

  Cleared all my cache files

  The value of my reading of mercury 'software only '.

  After doing the above, restarted the program and the computer.

  Don't made sure I had no RGB curves effect (as I saw it was a question of other threads)

  Remove all unused images

  Delete all files rendering and a new rendering.

  I'm editing of images requiring a Ultra key. I use a Three-Way color corrector. My video is not even 1 minute long, so I think it would be easy return and reading.

  Here's what I'm trying (I know I need an upgrade - hoped after this client project):

  MacBook Pro 2008

  Processor 2.4 GHz Intel Core 2 Duo

  Memory 4 GB 667 MHz DDR2 SDRAM

  Graphics  NVIDIA GeForce 8600M GT 256 MB

  Software  OS X 10.9.3

  Help! This is seriously slowing my workflow and my project is due tomorrow. Any advice would be appreciated.

  I am Windows but I saved some Mac links that can help

  -Next link says After Effects, but check YOUR permissions.

  -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml

  -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922

  -more than Mac 10.9.3 https://forums.adobe.com/thread/1491469

  - and https://forums.adobe.com/thread/1507936

  -Activate the user Root Mac https://forums.adobe.com/thread/1156604

  -l' Root user more http://forums.adobe.com/thread/879931

  - and more user root http://forums.adobe.com/thread/940869?tstart=0

• NO SABER COMO PASAR A AUDIO COULD HE TEXTED POR PREMIERE PRO. AGRADECERIA ME ENTERED LOS PASOS A SEGUIR. I MADE UNA PRUEBA DESCARGA Y ESTOY CONOCIENDO EL PRODUCTO ONLY. THANKS FOR HELP ME, ARE URGENT.

  NO SABER COMO PASAR A AUDIO COULD HE TEXTED POR PREMIERE PRO. AGRADECERIA ME ENTERED LOS PASOS A SEGUIR. I MADE UNA PRUEBA DESCARGA Y ESTOY CONOCIENDO EL PRODUCTO ONLY. THANKS FOR HELP ME, ARE URGENT.

  Hi Anan,

  According to me, you are looking for 'Discourse analysis' features of Premiere Pro.

  This feature has been removed from 2014 first Pro CC (v8.2) version.

  You can still use this feature, but you must install the previous version of Premiere Pro.

  Please visit the sites:

  Using the analysis of speech in first Pro CC

  Update on text speech this feature in video tools | First work Pro area

  Install additional libraries speech in Premiere Pro CC, CC 2014 and 2015 CC

  Thank you

  Ilyes Singh

• Premiere Pro extremely slow rendering/export time

  Recently exported a 6 minute video and it took about 2 hours. Same file in another application (Camtasia) on my computer took about 12 to 16 minutes. Usually take 12 to 16 minutes in Premiere Pro, but lately, he has been extremely slow. Anyone suggestions? Anyone else having these issues?

  Hi TGthe1,

  You never solved this problem? If so, let us know what has worked.

  If you do not return, we will assume that you have solved the problem by activating the GPU acceleration in SOUL & Premiere Pro.

  Thank you
  Kevin

• When I opened every day Premiere Pro it always says that I should check my account and I will not be able to use the work in a few days...  But I checked ve and my account is fine, all payments have been made. I m afraid that I have not access more in fe

  When I opened every day Premiere Pro it always says that I should check my account and I will not be able to use the work in a few days...  But I checked ve and my account is fine, all payments have been made. I m afraid I won't access more in a few days... What should I do to stay with my access?

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• Premiere Pro 9.0.2 slow the South on every Mac.

  In my studio, we have 4 Mac, two iMacs and Mac mini since last year full of aspects 2.

  We did edit fine until 2-3 weeks when we installed the latest Premiere Pro. Now, we can not make a stable reading from the time line and it takes about 2 seconds to start video playback.

  Very frustrating when you have a date limit every day at the end of the day.

  We have a network very fast working fine, but now, not even with the files in the local disk, and I talk about 20 seconds files in HD I need just for playback in Premiere Pro by itself.

  Can someone from Adobe fix this disaster? Can I resume a re install a first version you released by mistake works well?

  Ok.

  Our problem is our network, we have two routers and one of them slowed down any (a signal noise).

  The other thing you can do is remove the first cache generates, all of a sudden we had 300 + giga bites free hard disk.

• iPhone 6/6 slowed down 240 fps movie camera. MOV clips play not idling in Premiere Pro - need help

  I know it is understood to be in place before the slow movement in Premiere Pro. I have the clips that play very well at idle on the iPhone 6, but when I open the in Premiere Pro CC 2015 they play as normal videos without movement of slo. Can someone help me understand how to import and then get these clips to play correctly in Premiere Pro?

  TIA,

  Ken

  1 try to import as always

  2 Select the item in the project window / right click / Edit / film

  3. Select your work rate (i.e., 25 fps) (instead of the file frame rate)

  4 drag the clip to the sequence

  I hope this helps...

• Premiere Pro slow on Yosemite?

  Hello world

  I don't know if this should be here or on an Apple forum.

  I recently updated my iMac end of 2014 - purchased new in September - for OSX Yosemite. Since the upgrade, I noticed a significant performance with first drop Pro CC everything still seems to be blazing fast. I have the processor clocked at 3.4 Ghz, memory of fusion and GTX graphics of 780M, so I don't think it's a computer problem. The only thing I don't have is very vivid. Only 8 GB now. Could be the problem? I also use external drives USB 3.0 on the ports of 3.0.

  The reading itself is not a problem. The main problem is that it is extremely slow to switch between sequences. I'm running a separate monitor, but have already tried without it. I tried with many of my projects and all my projects this anymore (mostly films of marriage). The problem is these same projects will work perfectly on my older machine, which runs the Mavericks. This is a 2012 model iMac.

  East Yosemite my problem? I want to be sure, that it is the problem before I run a complete reformat of my system.

  Thanks for the help!

  I throw an update to this post for someone else who may have this problem. I returned my system back to the Mavericks (10.9) and the problem disappeared. Premiere Pro is running very fast, even when switching between the sequences. I don't know why this happened or if anyone else has noticed this problem, but for me, it was the resolve.

  I hope this helps!