Premiere Pro performance suddenly slowed to be almost unusable, even for simple projects

I'm running latest Premiere Pro update on a late 2013, 27 "iMac, with a processor 3,4 GHz Intel Core i5 with 8 GB of RAM, Mac osX version 10.9.5.  I know this isn't a lot of RAM, but until last week, or so I was able to amend a 4 K an hour with this configuration, as long as I ran the first session in resolution of 1/8.  He dropped some frames if I tried to play a long piece of it without stopping, but it is achievable for editing purposes.  But in the last days, the session has slowed to the point where he begins a picture of serious loss from the time I press play and is basically unusable.   He deposits also audio, and I can hear readers clicking frantically as soon as I touched the game.   My support is on 2-TB G - readers connected through USB3.

What I've tried so far...

-Ran the diagnostic on readers and it found no errors.

-Tried to link the project the identical files on the backup drive.  The same problem.

-I made that energy saver settings of my Mac have been fixed so that readers will never sleep.

-J' deleted all media caches and the preview files of first that I could find.

-J' I reset the privacy settings of Spotlight so that they index not only some folders on the internal drive and external drives.

-J' made sure that I got to spend the maximum memory (6.5 GB) at first.

-Finally updated my software to the latest version first.

None of these things made the difference.

- Then I thought that maybe the session came from is too big and bloated for my system to handle.   So I made a new project and import a simplified version of the only sequence that only refers to some of my files video color corrected.  This way I don't have to have an external drive connected and the session refers to much smaller files.  Still no improvement.

-So, I tried an experience where I made a whole new project and sequence.  I imported only 5 video files in it.  The biggest file less than 3 GB.  (I do Protools editing on this computer with files much larger than this, on the same type of readers extermal, without any problem at all.)  With only a single 5 video (and audio) in the timeline panel, it always starts up frames after about 2 seconds.  If I put another clip of 5 seconds in the timeline, the abandonment of the frame gets twice as bad.  If I try to put a video on them crossfade, playback becomes jerky that is very bad.

So basically, I started to be able to change a 60 minutes long 4K video project with video transitions, and multiple video and audio tracks.  (It was not perfect, but it is achievable).  And now all of a sudden, I can't play a whole new session which has 5 small video clips in there and not audio.    This isn't just my project or sequences that are the problem.  First just seems more to be able to access and read my media with any speed.

What Miss me?  Can you give me some additional suggestions to try that I have already mentioned above?  (And Yes, I know that many of you guys probably consider my hardware configuration completely insufficient for what I do, and you're probably right.)  But it did work pretty well for me up to this point.  I'm so close to the end of my project and I'm really just trying to get back to functionality, that I had a week ago, so I can finish).

I would like suggestions.  I feel like I'm running out of things to try.

After a lot of troubleshooting, it seems that the problem is related to the corrected version of the color of my video not being able to reproduce quite quickly.  While my system had no problem with the camera raw 4K files, the number of colors increased color corrected Pro Res versions are just too much for my readers to read in real time, even at low resolution.   Unless I want to do considerable ameioration (which I did not), the solution is to keep my color corrected without video corrected colors stacked on each other in the timeline and to turn off the video track containing the color corrected ones.  Of course, I can turn the color corrected piece when I need to check something with it, but for the playback feature when editing, I'm limited to files camera raw.

He is obviously an imperfect solution.  But because I'm basically done editing and just need to do some title and a small cut, I can finish the project works this way.

By the way, technical support suggested major improvements to my memory and video cards.  But if I were to try to resolve this further, I would upgrade to a better system RAID before I would make additional upgrades on my mac.  It feels really more likely it is the main issue here.

Tags: Premiere

Similar Questions

  • Buy Adobe Premiere Pro or creative cloud to create fillable PDF documents for use on our Web site?

    Should I buy Adobe Premiere Pro or creative cloud to create fillable PDF documents for use on our Web site?  We are a not-for-profit organization.

    Thank you

    Lance

    Adobe acrobat is the creator of the pdf file of the gold standard.

    You can either buy the last version of Plans and prices | Adobe Acrobat DC or 'rent' it via the adobe cc plans creative cloud and membership pricing | Adobe Creative Cloud

  • IM Download premiere pro on mac nut cc, it is said "you run an operating system that Premiere Pro no longer supports. See the system requirements for a complete list of the supported platforms. "How can I fix

    m download first pro cc on nut of mac, it is said "or running an operating system that Premiere Pro no longer supports. See the system requirements for a complete list of the supported platforms. "How can I fix

    Hello

    Please see system requirements below: -.

    Premiere Pro system requirements for Mac OS and Windows

    I hope this helps you!

  • Premiere Pro CC 2015 will install on my second computer for backup.

    Premiere Pro CC 2015 will install on my second computer for backup. The Application Manager lists only the first CS6 in option, which takes 20 seconds to download and finishes (obviously not the program).  This is a reformatted machine and a brand new facility - no previous version is still on the machine.  Literally, the CC was the 2nd application installed.  I managed to install other applications CC 2015 - Photoshop, InDesign, Lightroom, etc.  I have the full CC license and have installed Premiere Pro CC 2015 on my main machine.  Any help would be appreciated!

    Have you checked the first Pro CC 2015 requirements to see if your computer meets them?  If your sytem was short somehow the Desktop Manager it will list not by download.

    Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html

  • I get this message error - "sorry, a serious error has occurred which requires Adobe Premiere Pro to stop. We will try to save your current project".

    So I had [already] CS5 on my computer. I wanted to move to the new first Pro CC. So, until I did research on the passage, I just uninstall old Adobe all files my computer to ask a table open for my new download [first Pro CC].

    I am a beginner with the 30 day free trial, then initiate the payment once the trial is over. I did everything what I had to do to install the latest version of Adobe first Pro CC.

    Whenever I click the first Pro CC icon, it starts to launch upward, and about 5 seconds and it gives me the error "sorry, a serious error has occurred which requires Adobe Premiere Pro to stop. We will try to save your current project"and stops immediately...

    I have a 27-inch iMac [2014] new nice.

    I have enough memory and ram.

    What is causing this error? For more information on this would be greatly appreciated.

    Screen Shot 2015-07-23 at 8.51.30 PM.png

    -Justin

    I have resolvet

    Hi Jose,

    Seems that it crashes when GPU processing.

    Go to the file/project settings/general and change the rendering on "Mercury Playback Engine software only" engine.

    Press OK, you will get a dialog box in which select "remove previews."

    Try these steps and see if it works.

    Kind regards

    Navdeep Pandey

  • Use of the graphics card in Premiere Pro performance

    Hello

    I have PC, not bad but not the best. I would say that the average:

    P67 Extreme4 MB

    http://www.ASRock.com/MB/Intel/P67%20Extreme4/

    Processor

    Intel Core i7-2600

    http://Ark.Intel.com/PL/products/52213/

    RAM

    4x4GB DDR3 - 1333

    http://www.crucial.com/store/partspecs.aspx?IModule=ct51264ba1339

    Graphics card

    NVIDIA GeForce GTX 460 768 MB

    http://www.nvidia.co.UK/object/product-GeForce-GTX-460-UK.html

    Power supply

    Cool Aero - 700W

    http://UK.hardware.info/productinfo/112115/Aerocool-E80-700-700w#tab:overview

    I'm working on Premiere Pro CS6, I use Magic Bullet Looks, Twixtor ect.

    I know my GTX 460 is certainly slowing down and planning buy better card.

    Question is: how the right card to buy?

    How use of the graphics card is in Premiere Pro? It's something like just help for processor or do a half work?

    Buy GTX 780 or just 760 or about 780 price halp?

    To render faster than you suggest to buy new processor and good graphics card or leave the processor and buy Hi-End graphics card?

    Hackers Page - what video card to use?

    It looks like that particular 460 is not a very good card for this computer because there is not enough VRAM for MPE material. A 650 looks like more than enough.

    Article:

    Check the bandwidth of your current card memory and compare it to the expected update map. For example, a GTX 460 is faster than a GTX 650 because of bandwidth memory. Only if bandwidth memory is higher after the upgrade, can you wait a few performance WINS If the rest of the system is to him

  • CC Adobe Premiere Pro export excruciatingly slow... Help, please?

    Hi guys, the project of a school in a few hours and I have struggled with premiere pro for nearly 15 hours on a 15 minute video. It's pretty basic, a few images and pictures in 1920 x 1080, but for the life of me will not export this thing. It starts very fast but slows to a crawl and then curls up and stops. My system is not pulling punches: i7, 3770 16 gb 1600 mhz ram, k-2 x 780 ti. Any suggestions? I'm dying here.

    Hey guys, thanks for all the help. I found the problem: Gaussian blur. I got a clip that was about 3 instances of Gaussian blur, adobe was very unhappy about it and refused to make this (even after a line of four hours , he was stuck). If someone experiences this problem, check if you have consciously or inadvertently stacked Gaussian blur.

  • Premiere Pro CS6 is slow, handling the AVCHD files

    Does adobe give downgrade you the right to use an earlier version. Have heard that there is no problem with Premiere Pro CS5.5 and X.V. files.

    If you convert m2v ACHD / wav files is all very well, but sometimes I want to edit files natively in HD.

    Thank you, David

    System:

    I5 3570 K

    Kingston HyperX 1600 MHz memory

    3 hard disks. Boot SSD, the video is 1 TB Seagate / 750 GB WD Black.

    EVGA nVIDIA 480 GTX using file text Hack for MPE.

    Best poster product related questions in the forum of products in question.

    Try http://forums.adobe.com/community/premiere/premierepro_current?view=discussions

  • All browsers (Safari, Chrome, Firefox) on my new MacBook Pro are suddenly slow?

    I have an early 2015, retina refurbished 13-inch MacBook Pro with 8 GB of memory running with El Capitan 10.11.6.

    Last week, I noticed when I try to use any browser, it is ridiculously slow. It takes 5 + minutes just to load a single page. I tried deleting history/caching of files, I tried to change my DNS, I tried to open a space on the computer by moving large files on an external hard drive, and I tried to reinstall OS X. I have no idea what is the problem and I don't find much in trying to Google the problem.

    Any ideas that might help?

    Thank you!

    Restart your modem router and internet Wi - Fi if you use one then restart your Mac and try a browser.

  • Premiere Pro 20141 made slower?

    Everyone is made slower with 20141?  My hardware (PC) used to render my sequences in real time, but now they take about 2 X in real time.  I have the same GPU NVIDIA I've had before, have updated the drivers and PP said he will use it, but I see no activity on it now.  It is difficult to compare because I can't go back until 2014.  I have the time even if I render to SOUL in line to wait or do totally in PP.  I'm tempted to go back to CC (pre-2014) and making comparisons, but have not yet done.

    Thanks for the thoughtful response.  I thought I had scored my issue 'resolved' little time after I posted it.  I don't think that there is a change now.  The monitor that I had used to display using GPU has stopped working (probably due to a change by NVIDIA) so it looked like the encoding was not witnessed.  Once I got a usable monitor, I have seen that uses the GPU in 20141.  In terms of time spent, I am still trying encoding real time with some settings, but when I encode to more outputs, there is less help.  Could have been true before.  Basically I'm happy now.

  • Why do copy and paste into Premiere Pro perform so badly?

    Please explain why you can't copy and paste footage (audio and/or video) in a track chosen on a sequence? It almost always sticks in a track with images already there overlapping of images. He can not stick in a new track? I thought that it is a simple logic.

    Likewise, I explained in the first post, make sure that the track is selected.

    Select the clip,

    CTRL + C,

    Sequence of the switch,

    Select the track, place the playhead in the desired position

    CTRL + V (or Ctrl + Shift + V to insert).

  • Premiere Pro does not use the power of the nucleus for the rendering of chronology

    I had PremierePro CS5.5 and i7 920 and nvidia GTX 295. When I edit my images (cineform) everything is fine because I use CUDA boost, but when I try to restore the timeline I have seen on my CPU and GPU that rendered monitor uses maybe about 10% of the power of all hearts (8 cores). How to use the full power of the carrots when I went to my calendar?

    Project > project settings > general

  • Envy 15 laptop: NVIDIA Geforce 840 M with HP Envy 15 Lapytop - works with Adobe Premiere Pro

    I had this HPEnvy a couple of days and wonder for how long is more. I use the laptop intensively for video

    Edition, often away from home. At first, everything was fine. Now, just a couple of days later, it will often start Premiere Pro with 'record and playback' options greyed out, even if the day before, it is not grayed out. When this happens, video playback in Adobe Premiere, he turns for a few seconds and then becomes very jerky and stuttery.

    I tried to update all THE drivers video card.

    I noticed that there are two video cards appears in Device Manager. "One is the NVIDIA Geforce 840 M, the other appears sometimes as ' Microsoft based *" and sometimes as Intel *. If there are two graphics showing?

    I know you tell me to Adobe, but I think that something happens BEFORE first gets a peek in.  The laptop seems slow when loading any software. Just for the record, I uninstalled first Pro CC and have restored the laptop is "as delivered" condition. It took time, of mcourse, but didn't improve questions.

    At the current stage at the present time, I can't use the envy 15 it is recommended locations.

    I would be grateful for any advice as to why this is happening. Someone at - it of another more it?

    Thank you very much for your time and expertese.

    Alan S.

    It's been a while but my suspicion of power supply are correct. I replaced the power supply and it is reliable works as expected. I don't know what was wrong with the original, low voltage, main ripple?

    Thanks for your time. Problem solved.

    Alan S.

  • How can I prevent Premiere Pro CS6 of audio plug-ins loading?

    Premiere Pro cs6 will not open. He is suspended for loading the dll Native instruments (Kontakt plug-ins etc.).

    Is there a way to tell the first no longer use these plug-ins audio, or any other plug-ins of my choice?

    I do almost all of my audio work in other programs and import of first.

    PC/Windows 7

    Thanks, I appreciate the help.

    JasonPremiere Kontakt Conflict SC.jpg

    Hi Jason,

    Navigate to the following location:

    C:\Program Files\Adobe\Common\Plug-ins\6.0


    Move the CITROC3 plugins on your office or any other place. Then launch the Premiere Pro and see if it works.

    If you have problems loading the other plugins as well, move them to somewhere different kind that Premiere Pro does not load them.

    Thank you

    Regalo

  • Premiere Pro CS6 closes unexpectedly when loading images or videos in the Viewer.

    I've been using CS6 since May of 2013.  I currently work on a Mac. I've never had problems. I used it one day last week, then all of a sudden a few days ago is when the problems started. Premiere Pro starts normally (new or existing project), I can even import media. But I'm not able to load Images or videos in the Viewer, and I'm able to just drag and drop on the timeline. Audio seems to drag on the timeline very well.

    I tried many things to get wrong the question such as:

    1. start a new project. (Thought maybe something in the existing project was corrupted).

    2. opening a project older that I knew worked well in the past. (In addition, the new projects of thought were corrupt.)

    3. transcoding video files. (Think of the media was corrupted).

    4 restart the computer.

    5. hold 'Shift' when you start Premiere Pro.

    I don't get the error codes, just a dialog box that says: "sorry, a serious error has occurred which requires Adobe Premiere Pro to stop. We will try to save your current project".

    Thanks for your help.

    Hi Luther.

    Welcome to the Adobe Forums.

    What version of Mac OS are you using?

    Try to repair the preferences by opening the window of finder click on go and

    Choose go to folder and type ~/library and press ENTER. Then go to Preferences > Adobe

    and rename the 6.0 6.0.old folder. If you use the Mavericks (OS 10.9) try to give permissions for the

    File Adobe as well.

    Just reply in case the problem persists.

    Thank you

Maybe you are looking for