Similar Questions

• What is the best method to find troubleshooting documents for my printer?

  Click on the following link and you will find the search engine for enter a product name / number.  Click here

  If you lose or forget this link, go to www.hp.com, select the drivers support & and click on the blue box / violet in the Middle called product support & Troubleshooting.  In the search field for enter a product name / number, type one of the following:

  1. Model No.
  2. Product #.
  3. Full name of the printer such as "Officejet Pro 8600 Premium"

  Click Search , and then when the page opens, click on solve a problem.  When that opens, you can choose the category for the problem you are experiencing.  Then, you can select more specific questions.

  Hope that helps.

• The Illuminant C for a printed document conversion: D65 or D50?

  I have a few old color data of the 1930s which is expressed in coordinates using Illuminant C. I need to reproduce it in the swatches in a document for offset printing, I'll prepare you using InDesign. I can convert the coordinates in the LABORATORY using software. However, this requires that I replace C Illuminant D50 or D65. D65 is the match more closely to obsolete Illuminant C. But this project is intended for production printing, where it will be considered in a light booth D50. I have also been informed that the Adobe color engine also assume D50 for everything.

  Are there management settings of colors that I can use to preserve the appearance of the conversion of C to D65 somehow? Or should I accept the inevitable and convert directly from C D50?

  Important is the concept, either A or b:

  (A) a set of tokens is observed under illuminant C and the colors are represented by XYZ or xyY.

  A set XYZ sets a color absolututely, there is no need of a white point.

  In this case, the calculation is simple for reason x, y, y:

  z = 1-x-y

  X = xY/y

  Z = zY/y

  X 1 = X/Xn etc.

  next page 4 here:

  http://docs-Hoffmann.de/cielab03022003.PDF

  Xn, Yn, Zn is the D50 white point. In CIELab, it is just a reference, of course

  referring to expected conditions of the printed product vision.

  (B) a set of tokens is observed under illuminant C and the colors are represented by XYZ.

  How would the same chips look if they were read under D50? What are the new XYZ values?

  It is a question of color appearance. At the present time, I think that this is not your actual task,

  Therefore, it is not said.

  The CIELab values for Munsell colors are for example here, if that is important:

  http://docs-Hoffmann.de/munsell15052009.PDF

  http://docs-Hoffmann.de/munsell15052009-AbsCol-NoBPC.PDF

  Cordially - Gernot Hoffmann

• Development of InDesign documents for print and the web

  I develop InDesign documents for offset printing, but the Organization now wants to slip into the 21st century by also erect these same documents on the web (as interactive web pages that respond to user input). I'm looking for the outline of the best way to combat this, just so I don't waste too much time trying to learn the technology wrong or the fake software.

  I started to score my documents with XML, so I think the course on the web is from InDesign to XML format, then via XSLT or CSS in XHTML. What is the best or only way to do? I guess that DreamWeaver will also feature in the equation at some point.

  These documents are examination questions. They are pretty simple. All paras have paragraph styles, but there will be some substitutions of the police as bold, italic, underlined, clue, exposing. Without doubt, these must all XML tag, possibly using character styles? There are a lot of graphics inserted (files have and psd) which need to be converted to png, I guess. I have also attached metadata via XML attributes and I want that metadata to get to the web page and direct aid, action based on user input (like what answer they give to a question).

  As I have always worked on the print documents, I don't know XSLT, CSS, XHTML or HTML even if I just want to start on the right foot.

  Any suggestions welcome, including perhaps good tutorials or other resources. And of course, I want to automate this process as much as possible by using scripts.

  Thank you

  Brian

  For what it's worth, I would use the following XSLT to perform this task:

  http://www.w3.org/1999/XSL/transform">

  To test it in a browser, make sure that change you the file extension exported from "xml" to "html".

  In addition, make sure that your original InDesign document has the correct structure:

  

  Jeremy

• When will I receive the documents to my printer,

  My printer. HP PHOTOSMART 5510 BLK e series all-in-one

  N0 series. CN1640B0SY

  Model N0. SNPRH-1001

  My computer. DELL XPS 420, running under WINDOWS 7 64-bit

  Issue. When I get documents for my printer, how to reprint them? When I need another copy. Thank you very much

  Hi napleswatkins, the will of service (sending of documents to your e-mail address of printers for printing) ePrint impression whatever documents are attached to the email he receives. There is no way for the sender of the mail specify the number of copies of each document to be printed. Would be the only way to print several copies of a document sent via the service ePrint for the sender to attach several times to email, as there is no cause enamel exceeding the total size of the eligible file.

  The other would be for the recipient to just make copies of the document using the copy on the printer function.

  Hope this helps to answer your question.

• After the transition from XP to Windows 7, the custom-printing size selection box has failed.

  I always was able to use my C5180 Photosmart to print pictures of custom size on my old computer with XP.  After getting a new computer with Windows 7, the custom size box says "the custom paper that you have just set will become unavailable for selection until you have left and returned in the preferences to print/properties." (I did too many times to count!) All except 'Cancel' choices are grayed out.  This feature still works on my old computer, even if the box selection and formulation are different.  I have checked and checked the drivers and we have tried many other solutions.  I have worked in this market for a week or two and see that many other people have similar problems.  I would like to buy a new hp printer, but see that even with the new hp printers people have problems with paper sizes custom, which is very important to me - I print a lot of cards of various sizes, mainly of 6.5 X 10 inches.  Of course, no support is available for this printer "obsolete". (It may be "obsolete", but it works fine with XP). I also can't get any definitive information on this feature in the new hp printers and have noted that some people have problems with this feature on the new printers also.

  Thank you so much Shane R. for your expert advice.

  Can I try your solution in the future, but right now I'm satisfied by another solution, I realized with the help of a thematically response on a Windows 7 forum.

  First of all, I'm pretty positive, I used the correct driver because I downloaded the most recent, verified and recontroler, etc.  And, fortunately, most of the features all-in-one is working well.  Because of this, I hate to try drivers for another model - as I have solve my problem. I could end up with another problem - as no function of scan or something.

  Here is how I was able to get custom formats:

  'Start' to 'control panel' for 'Hardware and Sound' ('View drivers and printers')

  Click on the printer

  Choose "Print server properties" at the top of the screen

  Click 'create a new form.

  Give form a new name, for example 7-10 card and put the name into the box just above

  Complete custom down, for example, print size 7 x 10

  Click 'save form '.

  Click "close".

  The custom name and size is then appeared in the photo program I feel for and I was able to use it.

  Thank you, again. (Where can I provide Bravo?)

• How to prepare the document for print output

  Hi all

  I need to prepare a few illustrations scanned for CMYK printing.  I stay with Lightroom or use another product?  I have Lightroom and Photoshop Elements, but am ready to buy or rent, or InDesign, or something.

  Thank you

  Chris

  LR6 and CC 2015 supports output to a CMYK JPEG file. For a few tips, read the messages from here:

  Re: How to export a file with a CMYK color profile in Lightroom?

• HP Officejet printer 6700 Premium - reduce the print size of document

  How can I reduce the size of a document when you print?

  With all my previous HP printers that I simply went in properties of printer (print dialog box) and tab effects to choose the "resize Options' (51% of normal size) - I can't find this option in the properties of the printer HP 6700

  Hello Nonor35220, thanks for the reply.

  This printer software does not support the option for resizing.  Please let me know if you have any other questions.

  Thanks for posting on the HP Forums.

• How to resize the print size of an item within my PDF to multiple pages? For example a receipt or another image that can scan in bigger or smaller than my 8.5 x 11 Bill?

  How to resize the print size of an item within my PDF to multiple pages? For example a receipt or another image that can scan in bigger or smaller than my 8.5 x 11 Bill?

  Hello

  In the print dialog box, you would get options to resize your document.

  Try them and see if that helps.

  Once you choose the print option, it would give options to change the size of the page you need.

  Please check and see if it suits you or not.

  Concerning

  Sukrit diallo

• You can open a document in Photoshop cs6 and auto open in the print size

  I work at 500 photos per day and the print size helps out me. is it possible to open the document in print format to save me a step?

  It is possible. That would be called a script of the event and it would be placed where predefined Scripts under Scripts folder in the settings folder.

  Then open Photoshop and go to file > Scripts > Scripts event Manager to have this script that is executed whenever you open a file.

  The problem is to find a script that is already doing, or ask someone to write it for you.

  You can ask: http://forums.adobe.com/community/photoshop/photoshop_scripting

  Gene

• PIXMA MG8220 default page for printing size is out for 6 x 4, need to letter

  I have a PIXMA MG8220 and default page for printing size is out for 6 x 4, I need it to be paper letter size. I lose a lot of paper and cannot understand how to reset the default values on the individual mobile phones vs. using the printer printer?

  Simon

  Hi simonp.

  To set the size of paper to print on, please follow these steps:

  1. open an application such as TextEdit.

  2. Mount the file and select print or press CMD + P keys on your keyboard.

  3. Locate the PAPER SIZE field, and then select the format of LETTER paper.

  4 search drop-down list labeled PRESETS, then expand this menu and choose SAVE AS.

  5. enter a name of your choice for this setting by default, and then click OK.

  Now we can select the above created the preset in any application you are printing from, with the default paper size is letter.

  I hope this helps!

• HP Officejet 7612 large Format: Cannot find 13 "x 19" paper size for my printer 7612 "

  I can't find 13 "x 19" print format in the drop-down menu sleciton for my printer while this printer and officejet 7612 is designed to print up to 13 "x 19". I have the book ready to 13 "x 19" in the status bar so. "

  I also know that this printer does not allow for custom paper size.

  Please let me know. Thank you!

  

  Hello

  Select the Super B or paper sizes A3 + , both are equal to 13 x 19 inches.

  Kind regards

  Shlomi

• margins for the printer so the words are not cut on the right side. What are the correct numbers for size printing letter?

  What are the correct for the printer margin settings so that everything is on paper, without truncating them.?

  What are the correct for the printer margin settings so that everything is on paper, without truncating them.?

  go to the icon for your printer, go to the page set up, size, A4 sheet? 19.05 mm pitch all sides, mine is set up for this and it seems ok. or what you like

• HP 8600; Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Contact HP support.
  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=8600#n251

• Adobe Reader 11 does not print PDF documents for printing of attachments in PDF from Outlook 2016.

  Adobe Reader 11 does not print PDF documents for printing of attachments in PDF from Outlook 2016.
  Version of Adobe Reader 11 11.0.13 has been uninstalled and reinstalled. Print PDF documents registered in the system but not when opened as an attachment.

  Any ideas?

  HI Steve,.

  Please try to use the CD player with office 2016.

  Uninstall cleanup tool: Download Adobe Reader and Acrobat tool - Adobe Labs

  Install using offline Installer: Adobe - Adobe Acrobat Reader DC Distribution

  Thank you

  Abhishek