Presarido CQ5320F: adding usb 3.0

Similar Questions

• Pavilion p6270z: adding usb 3.0 to p6270z

  Is it possible to add a USB 3.0 port to my PC.  What equipment do I need?  The motherboard is able to manage USB 3.0?

  Hello

  Your machine has

  • PCI Express x 16: 1

  • PCI Express x 1: 3

  • PCI Express x 1 socket mini map: 1

• Pavilion AMD mainboard: adding usb 3.0 to Narra3(M2N68-LA) mainboard

  My card mother Pavilion had bad Caps top, so I replaced it with a Narra3 (M2N68 - LA) of Pegatron. It has 2 slots PCIeX1 open. Can I add a USB 3.0 card? (I can't tell if the slots are version 1 or 2 PCIe. Can find no indication on the card and no info on the site of ASUS or hp).

  Hello @originalluke,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how you're looking to install an expansion card USB 3.0 on your desktop computer, and I'd be happy to help you in this case!

  According to the specifications of the product for your motherboard, there are:

  • A PCI Express x 16 Slot
  • Two PCI Express x 1 Slots and
  • A PCI Slot

  You should be able to upgrade your system with a USB 3.0 card, as long as it meets the above requirements.

  Best regards

• adding usb 3.0 to s5703w (pavilion slimline) card. selection?

  I want to add ports usb 3.0 via an internal connector. How can I find out which select which adapt the slimline?

  Hello

  Based on this, there

  • Expansion slots:

• Pavilion p7 - 1017c: Add USB card

  I would like to add for Pavilion p7 - 1017c Desktop USB card so I added USB ports.  Looking for a recommendation on the expansion USB card should I buy.

  @JeanM-10, welcome to the forum.

  Here are a few additional cards to the StarTech that will work for you.  I suggest you contact their Technical Support for help to choose the best card for your system.  I've used several times their Live Chat option with very good success.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• My computer Toshiba Satellite keeps the 'blue screen' and that is to say that it is caused by "a problem with a USB driver. How can I fix it?

  Resolve a problem with a USB driver

  You have received this message because your universal serial (USB) bus driver caused a stop error, also known as a blue screen error. This error means that the computer has stopped abruptly to protect against potential corruption of data or loss.

  What is a driver?

  A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

  The recommended steps that follows can help to eliminate this problem, or at least reduce its frequency. Try them in the order listed. If a step cannot solve or reduce the problem, then move on to the next.

  Steps to fix this problem

  1. Adjust your computer's power settings

     The following power settings may help reduce the frequency of this problem.

     1. Turn off the USB selective suspend setting:

        1. Click on the Start button .

        2. In the search box, type power options, and then press ENTER.

        3. Find the plan selected, and then click change plan settings.

        4. Click change advanced power settings.

        5. Double-click the USB settings , and then double-click on USB selective suspend setting.

        6. Make sure that the USB selective suspend setting is disabled. If it is enabled, click it and select disabledand then click OK.

     2. Disable power saving mode (computer portable computers only):

        1. Click on the Start button .

        2. In the search field, type power options, and then press ENTER.

        3. Under Preferred Plans, ensure that High Performance is selected, and then close the window.

  2. Look for an update of the BIOS for your computer system

     Several computer manufacturers whose computers have this problem published BIOS updates to fix this known issue. Contact your computer manufacturer to see if a BIOS update is available for your computer model.

     What is the BIOS?

     The basic input/output system (BIOS) is software built into a computer that runs when the computer is turned on. Among other things, this software starts the operating system, and supports the transfer of information between hardware devices (such as the keyboard and the monitor).

     How can I find the manufacturer of my computer?

     Click on the Start button , type msinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as the manufacturer of the system in the right pane of the system information window.

     Click here to go online to see the contact information for most of the computer manufacturers

  3. Download and install the latest updates and drivers for your computer

  It's a good idea to periodically check the updates of driver for your computer, especially if you added new hardware recently, such as a USB hub or other USB device.

  What is a USB hub?

  A USB hub is a device with multiple (USB) universal serial bus ports. USB ports are narrow and rectangular connection points to connect USB devices to your computer. A USB hub is used an Extender of port or port replicator, providing more USB ports to run from a USB connection on your computer. USB hubs can be external devices that connect to a USB port, or they can be internal devices built into your computer.

  To check for driver updates:

  1. Use Windows Update to find and install updates:

     1. Go online to Windows Update

     2. Click the check for updates in the left pane, and then click view available updates.

        What happens if I see any updates available?

        • If you see you receive updates: managed by your system administrator, you can try clicking on the link to check online for updates from Microsoft Update or Search online for updates from Windows Update, but you should maybe contact your system administrator to get the desired updates.

        • If you do not see the message above and no update is available in Windows Update after clicking on the link check the updates in the left pane, then the available updates have already been installed.

     3. Select the driver for your device updates and more updates to install.

        Note
        We recommend that you install all Important updates and recommended. These updates improve the security and stability of your computer.

     4. Click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. If you recently added a new hardware device on your computer, go online to the manufacturer's Web site to see if there is an update to the driver.

  3. If you recently added a new program on your computer, go online to the manufacturer's Web site to see if an update is available.

  Steps to work around this problem

  Warning
  These measures are intended to solve a specific problem, but could do so by temporarily disabling or removing some features on your computer.

  1. Try to remove newly added USB devices

     If this issue occurs after adding a USB hub or other USB device, consider removing to see if the problem goes away. If this resolves the problem, contact the manufacturer of the device for the updates or other recommendations.

  2. Do not disconnect USB devices while the computer is to stop or go to sleep

  This problem is known to occur when USB devices are disconnected when the computer is trying to stop or switch mode to 'sleep'. This is common with cell phones, especially those with a docking station, as docking station can act as a USB hub. The frequency of this problem could be reduced by allowing your computer to completely close or completely in sleep mode before detached from its docking station or unplug it or the docking station USB devices.

  If you know which USB device is causing the problem

  It may be possible to prevent the Blue error screen by choosing the option remove the device safely in the Notification area, before putting your computer into sleep or Hibernate mode.

  1. In the system tray, click the icon to remove the device , select the USB device that you think that the origin of the problem and then click OK.

  2. Do not physically remove the USB device.

  3. Perform the action which resulted in the Blue error screen, so that was taken the functioning of your computer after the mode standby, hibernation, or, in the case of laptops, close the laptop computer or place it in a docking station.

     1. If the Blue error screen persists, it is likely that the problem is with another USB device. Try this procedure using other USB devices until you find that at the origin of the problem.

• If the Blue error screen disappeared, you have probably identified the device causing the problem. Contact the manufacturer of the device for more information on how to solve this problem, or use the option to remove the device safely to work around him.

Note
Depending on the manufacturer and model, some USB devices will become available automatically when you resume using your computer. Others will require that first disconnect you physically and then plug back in front, they will be recognized by the computer. Check the system tray to see if the USB device that you removed safely become available when you started to use your computer again. If she did not become available automatically, then physically unplug it and then plug it in again.

This is the screen it gives me. Help, please! If problem fixed, will BE AWARDED!

Hi ChayceSteffiare,

For instructions on solving problems with USB devices, see the following article:

Tips for solving problems of USB devices

To fix blue screen errors, see the following article:

Pick up the pieces after a computer crash

See also:

Optimize Windows Vista for better performance

Ways to improve your computer's performance

• HP 1102w don't wake up to print.

  Installation program... MacBook Pro, w / OS X 10.9.2. HP 1102W is connected to a router Apple Airport (A1521) via the USB connection. Waking up not in print. Have to go to the office and manually turn on printer. There is no option to make changes to the printer to set up... System Preferences > printers/scanners.

  Any help would be appreciated.

  Hello

  Try to disable the automatic stop of the printer function:

  http://support.HP.com/us-en/document/c02860533

  If the options do not exist as described, plug in a USB key and look for options in the printer queue added USB as you can miss some options while using a print server to share the printer (as the basis of Apple).

  If the same check persist for the difference while using a direct USB connection connected to the Mac or by the printer connected to the Base of Apple Wireless by method according to three within the OS X 10.9 section below and check for the difference:

  http://support.HP.com/us-en/document/c02847467

  Shlomi

• For RV215W 4G Modem compatibility

  Hoping someone can tell me what 4 GB USB modems are/are not compatible with the Cisco RV215W? I am told by a customer that a MF823 (Telstra) modem does not work and that it is not compatible.

  Thank you

  Yes, there are some options/sources where to find modems of the updated support list:

  • Other items of discussion of the Support Forums as I post before
  • Release notes which usually contains lists of newly added USB modems (IE compatible), like here for the latest version of the firmware on the router RV215W ("problem solved: AC320u Sierra 313u and Huawei E173 dongles do not work with the device." "").
  • Another option is to open the "Small Business routers" section of this forum, type your model of router (for example, RV215W "") in the upper right search box and keep the "Small business routers" option selected that appears when you type, and then press ENTER. In the new page click on the "Documents" tab to see all the relevant documents for your model and you will see the modem compatibility lists documents here. It is more common elsewhere how Cisco share their personalized with information documents additional community on their products. And here, you'll find this last list of modems supported (from October 2014) for your model of router.
  • Or go directly to the page of the Cisco Knowledge Base , product list, select "Routers" and list your model of router and understand a few key words such as "usb", you will find the same document here.

• Update dc/7600

  Trying to move from a pentium d 820 to a pentium d 950, but when I install the new processor and try to turn it on I get a flashing red light fixed,.

  Im running windows 7 ultimate 64 bit with 786 1 v01.61 on the 820 d bios and it works great one I assumed that I would have to do is plug the new processor and go from there.

  I need to install a different bios for d 950?

  Hello:

  The latest BIOS update, you had should include this microcode update.  Here are the release notes for version 1.56 A BIOS.

  IMPROVEMENTS:
  -Added USB 2.0 support native.
  -Support for Intel Pentium 4 631, 641, 651, 661
  and Intel Pentium D 930, 940, 950 processors.
  -Adds support for able hard disk Drive Lock.

  However you can try to update the firmware because you have nothing to lose. I have day microcode it references just to cover my bases, because nowhere in the BIOS date of issue has support for processor 945.

  Need a floppy drive in order to run the firmware update.

  I don't think that's the reason why you are getting the error. Normally a missing microcode produces just a firmware error (unsupported processor) and you can still boot into windows. You just have to keep pressing the F1 key from every time that you start the PC in order to continue the startup process in windows.

  I never heard of anyone getting the error beep 9 because of that.

  So, update the firmware. Make sure that it worked by trying to run again. If successful, the PC should show the same version of the firmware like the one on the floppy. If so, simply cancel the installation.

  Put in the 950 and cross your fingers.

  My money is on a bad treatment.

  Paul

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• ESXi vm on workstation, can connect ipod?

  Hello

  This question is Yes or no:

  I have esxi 4 installed in a virtual machine on my computer, and then on the esxi host 4 I deployed a 32-bit windows xp vm, I added usb devices on two VMS esxi in workstation and windows xp vm on esxi, I can connect the ipod to the computer virtual esxi, i.e. no mystery, since I was a machine virtual windows 7 on my computer and I use itunes and all that.

  But, I can connect the ipod to the vm xp residing on the esxi host?

  See you soon.

  This question is Yes or no:

  The answer is 'no '.

  You can't pass through USB devices to a virtual machine running on ESXi. It didn't matter if the ESXi host is vital or physical (as in your case)

  André

• Simple question - ESXi embedded

  Hi guys,.

  I have not used before ESXi. I'm specialization a solution for a customer on HP bl460c G6 blades. How do you buy integrated ESXi? Do you buy the ESXi license HP and this is the previously connected with ESXi loaded and configured USB? Or do you still need to download and install, and the part of HP is just an added USB key?

  The USB is reliable?

  Waiting: http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPVM05

  AWo

  VCP / VMware vEXPERT 2009

• Added Windows 7 as OS secondary now USB adapter and network does not work.

  Hello

  Recently, I bought a laptop HP from TS 15 w / 4GB preinstalled with Win 8. I bought windows 8.1 PRO thinking that w / the downgrade rights I get Win 7 w / no prob. Must clear my system and bring back the 8.1. And yesterday, I added Win 7.

  Now, every time I switch to Win 7 (I need Win 7 for a work at home customer), I have no internet access at all - the network adapter is missing so if the USB controller and ethernet. So even if I had to go back to 8.1 and download a driver on a USB I can't use cuz on Win 7, it would not be recognized.

  HELP ME PLZ!

  Hello:

  These drivers should work:

  LAN: Download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Wireless:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_134477_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Backups of Server 2008 R2 running slowly after deleting failed drive and adding new USB drive replacement

  We had a disk which is used for our backups on one of our servers using a USB docking station.

  (We use 5 x external hard drives for our backup schedule).

  I removed the defective drive and added a new using the correct wbadmin command.

  Now, everything works fine except that the backup now ends at 0831 considering that with the old disk, it would end to 0600.

  There is no any difference about this disc is in the USB docking station - it's just to take 2.5 hours more than previously on all players.

  Starting backup to 2100.

  What can I do to bring it back up to its initial speed?

  Thanks in advance,

  Dave

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• HP workstation xw6200 model number: DU937AV - a Front Panel USB HUB added

  Good afternoon

   

  I'm back with a double question this time.
  

   

  (a) my XW6200 in its current configuration offers only two frontal USB 2 ports, the other 6 being located on the rear panel. Would it not possible to add a front panel USB Hub?
  

   

  (b) what about 3 USB ports? What do you think about adding to my machine?
  

   

  Thank you very much for your help.
  

   

  All the best,
  

   

  Boyar
  

  All we hear is an opinion, not a fact.
  All we see is a point of view, not the truth.
  [Marcus Aurelius]

  Hello again from Boyar.

  I think that what you are looking for is on page 166 of & Service Guide the technical reference computer.  Here is a direct link.

  I would like to know if that's what you're looking for.