Prevent the app from deletion...

Similar Questions

• I was using iDownloaders browser and a message came your device is infected with a virus. I removed the app from my mini iPad 2 but now I feel crashes especially among angry birds. I want to restore, but I fear that the virus will reinstall.

  I used the iDownloaders app browser, (it is a video download application I use for a few years with no problems), when a message came "your machine is infected with a virus please leave the app and contact Apple." I removed the app from my mini iPad 2, but now I meet including crashes in Angry Birds Seasons and Rio. I want to restore the iPad, but I fear that the virus will reinstall themselves as well. Apple did not contact because I never heard of someone who got a virus using iOS. I took it slightly think to delete the iDownloader app would solve the problem. Im running version 9.2 on a retina mini iPad 2. Maybe someone has an answer on what I can try before you contact Apple. I appreciate any suggestions thanks JohnG

  Unless your iPad is jailbroken, it is not infected.  This notice is a well known scam to a fraudulent web site.  You can restore.

• On a 32-bit vista business system, what is the right way to recover from a damaged NTLDR file that prevents the system from booting?

  On a 32-bit vista business system, what is the right way to recover from a damaged NTLDR file that prevents the system from booting?

  Also, is there a powerful device filled, utility like Winternals Windows PE boot, I can download for the resolution of problems like this and others?

  Thank you in advance!

  Have you had a glance at this startup repair disk?

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Prevent the user from uninstalling the application

  Hi friends I want to prevent the user from uninstalling the application on my mobile phone blackberry if I give how do I do it and how to fix this inaccessblity thanks to programming, I mean putting prevention in the form of mobile etc.

  BES policies can ensure that an application is not deleted.  Sorry should have mentioned that.

  Installation of OS 5, I've mentioned is:

  CodeModuleListener

  This will get called when a module is removed or marked for deletion.  Code here could probably try to download and re - install an application removed, however, it is a signed interface, so I'm sure that RIM could quickly find developers who have tried to use this interface for dubious means.

  You are however correct Ted, because it won't stop someone wiping their Blackberry.  In addition, if you remove the application that would be re - install itself, then it's history anyway.

  I think that the advantages of using this method to tidy, after a deletion (for example delete associated files on the SD card) makes a worthwhile addition to the API.

• Question about the app from the App Store

  A screenshot of something related to the app from the App Store.  It has been around for years, but I can't find any reference to it.  What is c?

  It's a mystery.

  Mac mini end of 2012, i7 2.6 G, 16GB mem, El Capitan 10.11.6

  It appears and disappears at random, seldom (monthly?), don't know what triggers it.  I don't find it in the list of processes?

  It is irritating and seems harmless, but who am I to judge a prejudice.

  Johno-

  Try to validate fonts and, if necessary, to restore the Unicode Standard.

  Police book - validate fonts

• I can't buy all the apps from the App Store

  I can't buy all the apps from the App Store. Every time I try, I get a message saying required verification and the update, billing information. I changed my I cloud of password yesterday and it checked and my billing information are up to date. I don't know what the problem is.

  Of course it looks like yo do not have a means of valid payment on your account.

  If you have any questions please contact iTunes:

  http://www.Apple.com/support/iTunes/contact/

• Vista will not start after update 12/9 - a patch prevents the system from starting.

  My computer has downloaded an automatic update on 09/12/09.  It restarted while I was at work, and when I got home he had just ran a startup repair function which could not solve the problem.  I tried to run the rapair again and it failed.  I tried to do a system restore on the eve of the update, but the operating system could not start again, and I was sent automatically the Startup Repair tool.

  When I look at the diagnostics, the message says "a patch prevents the system from starting.  I have no idea how to solve this problem.  Can someone please?

  PCrepair101,
  You try to use the package manager I link a few post above?  Otherwise, demarrer start from your DVD, type command prompt, and then follow the steps in method 2.  http://support.Microsoft.com/kb/940410
  If this does not fix it you can rename the pending.xml file and restart.  To do this, boot from the DVD and enter the command line.  Then type:
  CD windows\winsxs - press on enter
  Ren pending.xml pending.old - press on enter

  Then restart the system.

  You said "when I try to do a system restore, it is said that there is no previous restore point" and I was wondering if you have tried a "Startup Repair" not a system restore.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry smartphones trying to download the app from Directv

  It is only available on the Directv website. I select "BOLD" as my camera because the torch is not an option and the download comes up as a dot jad file. It won't open with any program on my laptop. How can I get the app from directv on my lamp? It is not that difficult.

  I have the DirecTV app on my flashlight since Oct 2010 (when I switched to digital TV), and I had no probs with it, other than my OS update that I did yesterday, who have somehow wiped out the app Grr...

  I'll have to buy the app again, so I'll post to let you know if it still works on the new OS I, v6.0.0.526. BRB...

  -Update (below)--

  Went to the site via a browser of my torch DirecTV.com (your torch can gain access to the file, not your PC), scroll to the bottom of the page web & clicked on the link 'download app' which is about 1.2 MB in size. This takes you to another web page to choose which device you have.  For the torch, select 'BlackBerry Storm 9500 series (OS 4.7 or higher). This will launch the installation process.

  Since I got the app before, he asked me to check I want to install "Planner" when another already there (this is the same version number as my original install). I went ahead & he did it for you, I could make sure it works.

  Once the installation is complete, it gives you the choice to the installation of 'Ok' or 'Run' I chose "run."  Loads of app (may take a few minutes based on the memory of your torch) to the login screen.  Enter the email that you have registered your DirecTV account, enter the password, and then click 'connection '.  You should be ready to go out, except if you have forgotten your user name, as I! LOL * stem *.

  Oh, almost forgot to mention that some features requires you to be within walking distance (i.e., same room) as the receiver in order to access these features... a bit like the use of your lamp torch as a remote control.  So you want to make sure that you do not use the app to work if it is for a function that needs you to be in the same room. ;-)

  Good luck!

• Prevent the user from changing the page in URL - Apex 5

  Dear community of Apex,

  We seek to protect our handling of URL pages.  The protection of session state is enabled, and each page has page value «Arguments must have Checksum» access protection  However, the documentation seems to discuss in order to prevent the user from element values in the URL.  We want to prevent the user to change the page ID in the URL.  Currently, a user is able to hack the URL and take in the middle of a wizard process for example.  Is it possible to stop this?  Other that an element of creative previous train stop check.

  * Version: Application Express 5.0.1.00.06

  Thank you

  Barry

  bSamuel wrote:

  We seek to protect our handling of URL pages.  The protection of session state is enabled, and each page has page value «Arguments must have Checksum» access protection  However, the documentation seems to discuss in order to prevent the user from element values in the URL.  We want to prevent the user to change the page ID in the URL.  Currently, a user is able to hack the URL and take in the middle of a wizard process for example.  Is it possible to stop this?  Other that an element of creative previous train stop check.

  Hi Barry

  Affecting the security attribute Access Page Protection page No. URL Access and navigate between pages using the type of the Page Management Branch (uncheck the option creates a branch using redirection page in the Wizard) will avoid this:

  No URL access -Page can not be found using a URL, but the page can be the target of a type of Page Management Branch, is not doing a URL redirect.

  It is a little more restrictive that a normal direction of the session state values cannot be positioned or erased declaratively in the branch, but is not often necessary in a several step wizard, and it's pretty simple to work round using prior processes - or post-branche or by referencing the item values directly from other pages.

• bought the plan of photography and to download the app from cc but still not able to install complete programs, continues to remain without subscription found

  bought the plan of photography and to download the app from cc but still not able to install complete programs, continues to remain without subscription

  Sign once Adobe Creative Cloud App and sign in again and check:

  Connect and disconnect activate Cloud Creative applications

  Always the same?

  1) go to C:\Windows\System32\drivers\etc and locate the file named hosts inside etc folder.

  Copy 2) guests of the file to the desktop and open the same thing with Notepad.

  Check if you can see all Adobe related as entries in the Hosts file 127.0.0.1 activate.adobe.com... etc?

• I got a mac book pro with Yosemite. Today started to ask me to enter in the first series. Uninstalled all the app from adobe and I loggin and install all the app and still the problem

  I got a mac book pro with Yosemite. Today started to ask me to enter in the first series. Uninstalled all the app from adobe and I loggin and install all the app and still the problem. What do I do?

  If you are prompted for a serial number in the creative clouds, see this link:

  https://helpx.Adobe.com/creative-cloud/KB/CCM-prompt-serial-number.html

  Guinot

• I downloaded the App from creative cloud and I'm trying to download Lightroom and I get error Code 6

  I downloaded the App from creative cloud and I'm trying to download Lightroom and I get error Code 6?

  If it is exist code 6, errors ' Exit Code: 6 "," Exit Code: 7 "|"» CS5, CS5.5

• How to prevent the user from creating jobs

  Hello
  
  We need to prevent the user from creating jobs on a dev environment. It's a 10.2.0.4 standard database on 64-bit linux.
  
  Their scheme has only connect and resource roles. Is it possible to prevent them from creating jobs? 11 g, it's permission to CREATE a TASK, but I don't know how I can do this in 10g.
  
  Thanks for all the ideas!

  I try again...

  If you revoke execute privilege on DBMS_JOB package with 'regular' users (i.e. non admin), then they will not be able to do anything, including by creating with the SUBMISSION process.

  No you want?

• How to access the features of the APP from SessionBroker/UnitOfWork application?

  How to access the features of the APP from SessionBroker/UnitOfWork application (legacy TopLink APIs)?
  
  For example, how can I get similar APIs like em.createNativeQuery (managed object query return native) when you use the UnitOfWork API?
  
  Not JPA-coded on top of UnitOfWork or UnitOfWork on top of JPA?
  
  SessionBroker can an EntityManager is running?
  
  How can I execute JPQL via UnitOfWork?

  The answer would be no. We put only support flush multiples for the use of the APP.

  A more detailed inside the code look will show that we have actually created a RepeatabaleWriteUnitOfWork that offers extended support to match the requirements of the Joint Parliamentary Assembly. I have not tried using this subclass directly with our API native and the SessionBroker. I will review the developers to see what we believe, this is the best way forward for SessionBroker users looking to use JPA and our extended features associated with JPA.

  Doug

• error on startup: "a patch prevents the system from starting.

  Original title: Windows won't load - Vista

  Windows does not load... My restore won't work - I get a msg that "a patch prevents the system to start."  It seems last successful update was 14 and only restore to earlier date options go back 5 days.  I'm not a very experienced computer Fixer.  Any ideas on how to move to the previous date?  Thank you!

  Hello

  Here's how to do a system restore

  make it Safe Mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/