Prevent the user from type sms or email until the application runs

Similar Questions

• Prevent a user from changing the ID of project in P6 EPPM 8.3.7

  Anyone know if there is a Global privilege or project security profile that prevents a user from changing the project on an existing project ID?  We use Primavera P6 EPPM 8.3.7

  Thank you

  Eric

  Hello

  Security of the project profile below can help you

  Change the details of the project with the exception of costs / Financials

  Determines if the profile will allow users to modify fields in general tabs, Dates, default values, resources, and settings of the project details. To assign a project of baselines, users must also have the privilege of project 'assign the planning of project"assigned to their profile.

  Kind regards

  Marcos

• Prevent a user from changing

  Hello
  
  : Is thr possible to prevent a user to perform the DML operation

  Hello

  LOCK TABLE tablename in EXCLUSIVE MODE;

  We can use this to prevent a user from some time handling

  If you want that the user don't not to access permanently to revoke the privileges of this user.

• Prevents the application to be modified after being approved

  Hi all
  
  Senario:
  
  Prerequisites:
  There is a resource configured on IOM A and it is available to ask
  The approval process requires two levels of approval: 1 the User Manager and the 2nd the authorization object
  
  Manager1 is the Manager of User1
  Authorizer1 is the purpose of the authorization for resource A
  
  
  1 - User1 initiates a request access to resource A to itself.
  2 - User1 must enter information before submitting the request and we denunciations considers the level of access to his account on resources. He chooses the level of 'single user '.
  3 - Manager1 receives an approval task and approves it.
  4 - Authorizer1 receives a task approval, but, for some reason, takes any action. (It is not in the office today)
  5 - User1 goes back to the request and replaces its access level 'admin '.
  6 - Authorizer1 comes back the next day and approves the request.
  
  Problem: Only approved Manager1 because at the time he checked demand the access level is set to 'single user '. He would not grant admin access level.
  
  Questions (options):
  (a) is it possible to prevent the application to be modified after being approved by Manager1?
  or
  (b) is it possible to send the application for approval to Manager1 if there was no change once it has been approved?
  
  Thanks for an overview.
  Adriano.

  There are several solutions to this. See below:

  - Either remove editing permissions for ALL_USERS of the shape of the object. If your end user would not be able to update the details of the application once it is submitted. In case the desire of the user to change the data, then it can send an email to manager to do. But the end user cannot do itself. See tab the form designer to apply permissions to objects of. It must have an entry for ALL_USERS. It is an immediate solution to your question with 0 effort.

  - Or if you specifically want that after approval only, the form data should not be updated. Then create an adapter of the entity that verifies whether or not the request is currently underway with the Manager. If this request is not with the Manager then this entity adapter throws an error shows that the application has been approved by the Manager, so it can not be changed. This would require changes as follows.

  a. you must include 2 additional fields hidden in your application form which contains the requestId and UserID. Once the end user submitted the application, you must assign this form requestID requestId field generated at the time and the other IOM userID field. You can do this with a task in the approval process by using the API of IOM.

  b. now create this map of the entity. It will have 2 variable reqId and userID. You get these attributes and IOM API check is pending with the Manager of the user request. This adapter returns true or false. False, add an error handler task.

  c. attach this adapter on the event before update of your form in the object data manager.

  Now if after approval of level 1, the final user tries to update the form, it displays an error in the format of the IOM ' as the request was approved by the Manager, so it is not editable '

  This should solve your problem.

  Thank you

  Sunny

• Memory of the application running at 100%

  My problem is with the memory of the Application works 100% (see fig. 2).  It started yesterday so I decided to uninstall some of my old applications Photoshop (CS4, CS6, for example), hoping that would solve the problem, making sure that I do not uninstall Photoshop CC 2015.5 (latest version).  However, this has not fixed the problem, and to make things worse I am now unable to open Photoshop CC 2015.5 because it seems not to be there!

  A further review of the activity monitor (Fig. 2), I found two identical icons 'Installer' both taking / using more than 15 GB each memory resulting in memory of the application running at 100%.   I have no idea what these installers, but they could be linked to the fact that when I try to use the program adobe (Fig. 1) installation and after some time, the icon disappears and nothing happens and the statistics of the Application memory gradually increase (the installer icon) until the computer was delivered to a grinding stop.

  Therefore, in order to get the work PC should select 'Install' icons of the activity monitor and force them to completely.   The memory card, then returns to normal.

  Just to add to my problems, I cannot open Photoshop CC 2015.5 nor can I use the installer of cloud creative access to download photoshop CC.  I tried to load photoshop via time Machine, but I get "Error 1" see fig. 3.

  My PC is:

  iMac (27 inch, mid 2011)

  Operating system: OS X EL Capitan

  Processor: 3.4 GHZ intel core i7

  Memory: 16 GB at 1333 MHZ DDR3

  Graphics card: AMD Radeon HD 6970 M 2048 MB

  I would be very grateful if someone could help with this problem.

  Thank you very much

  HB

  -----------------------

  Fig 1

  

  Fig 2

  

  Fig 3

  

  Hi Haydnb25097666,

  For the configuration error, please try the steps mentioned on: in Adobe Creative Suite or Adobe Creative Cloud Configuration Error.

  Please let us know if you still have problems with the memory usage.

  Thank you.

• How to prevent a user from opening multiple instances on the same computer?

  On site oldnavyweekly.com , there is a .swf which prevents users to open multiple instances of the site at the same time on the same computer. If you open the site and try to open it again in another window, it will not load. Cannot open the site again until the first window is closed. How did they implement this?
  My analysis, that is NOT:
  1. cookies - the block always takes place if you try to open it in Internet Explorer and also try to open it in Firefox at the same time.
  2 flash Cookies - the block always takes place if I disable flash cookies.
  3 IP Based Block - you are not blocked if you open the site on two separate computers with the same outgoing IP address. From my analysis, their server does not help in the block at all.
  It seems as if their .swf creates a sort of object throughout the global system which can be detected in other instances of the application on the same computer. How did they implement this?
  Thank you!

  use localconnection.  everyone has a localconnection to send and a receiving localconnection.  the lc reception closes the current application.

• Prevent some users from connecting

  Is there an easy way to prevent users from my LDAP directory with a special connection to the CMC role? Or would need a custom for this component?

  If this is not the case, is it possible that I can remove the role 'authenticated' of these users? I looked at maps of credentials, but does not know how to remove a role with a card.

  "authenticated" by itself really means little, this role does not have the permissions set in COE out of the box.  By default, users are granted the role of "guest", who has read access to the security group 'Public '.  Remove this 'guest' read permission would allow a connection, but no access to anything other than an error page.  Simply connected usually isn't a problem, it is usually more what a user can access once logged.  This is where a user roles has become important.

  In my opinion, the simplest method is to set the provider LDAP to examine a certain OU to its users and include only users in this ORGANIZATIONAL unit that will use COE.  This suggestion is based on the information at hand.  If you use the portal, SOA, etc. in the same domain, this approach is perhaps not possible

• Unable to disconnect the user admin, user has the application running

  Hello
  
  Is there anyway that I can disconnect this user admin, because I know that there is demand running, I'm trying to Log using the regional service, but it keeps giving me the user a reuqest running.
  
  What should I do about this?
  
  Thank you

  Celine wrote:
  Robb,

  Thanks for the reply. The problem is that I can't find the application. then I tell myself that what essbase studio performs the import.

  Thanks again.

  Don

  Stop the services...
  N

  Kill Esssvr.exe process of essbase server.

  Kind regards
  Katia

  Published by: P on April 7, 2011 15:11

• Custom creative cloud open when a right click and say the application runs as an administrator, help?

  So after purchasing membership for one year with all the content, the creative cloud decided to no longer work on my computer.

  I had to update, but the update crashed with an error 1001 then with an error of 50 first so I tried to uninstall, but he said there is a mistake to uninstall so I restarted my computer and when I tried to open it, the program said that it has been damaged or missing so I reinstalled online.

  After re-installation, he went to the page of the trial so I wound up so I could connect but it does not open. I am a student and you have a class from this week where I need this program given im in the game and Animation. Help, please.

  Hello

  Please, try the following steps:

  • Uninstall Adobe CC of the machine (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Set to "Full control" permissions on the files of Adobe for all users in the following locations:
    • [System drive]: \Users\ [user name] \AppData\Local\
    • [System drive]: \Program Files (x 86) \Common Files\
  • Restart the computer.
  • Install the application Adobe CC (Creative Cloud help |) Creative cloud for office)

  Kind regards

  Sheena

• Demo record for the applications running in the VM reader.

  Hi all

  My IT people become me new computer with Captivate 8 installed.

  On this new computer, I also have VM Player. Software Application runs on VM Player.

  My question is that I'll be able to save the Simulation of Application software that runs through VM Player?

  No indication on this subject will help me greatly.

  Thank you.

  It depends on the license type, normally just disable the version of Captivate will be sufficient, must be done before uninstalling.

  I have Captivate (licensed) on different devices, I have to disable a lot when I switch to another system or device.

• Need to activate the application runs on the two oracle EE and SE

  Hello
  
  At the present time, our application is only deployed on Oracle Enterprice Edition. I have a requirement to create a version degraded application runs on Oracle. Currently we use partitions and partition proning by specifying the name of the partition in our queries. Is there a way I can run these applications in a Standard edition? If not, is it possible that I can dynamically determine edition and run the queries accordingly from my code. Can I use same JDBC driver for standard editions and Enterprice?
  
  Kind regards
  Labrousse

  Same JDBC driver is OK.
  Partitioning is an option of the company. In itself, you cannot use it

  Query on v$ version for the current database version.

  Success!
  FJFranken

• error on the application running on the playbook

  Hello

  I built an application using phonegap, what I have running on other devices, but I built a .bar file and I get the following error when you try to install the application

  failure of 821 request-requires-system: System name not recognized 'BlackBerry 10'

  Ive been looking for oonline and in some forums but I can't seem to find an answer to this question.

  It seems that the BAR file was built for 10 BlackBerry which is a different architecture than the OS of the PlayBook.

  There is here a guide which describes the process of generation for PlayBook:
  http://docs.PhoneGap.com/en/2.3.0/guide_getting-started_blackberry_index.MD.html

  Specifically, you must use the Tablet OS SDK, not the BlackBerry 10 SDK.

• How should I detect the application runs in the background?

  Hello friends,

  I use 2 statement to run the application in forground and background.

  UiApplication.getUiApplication () .requestBackground ();
  UiApplication.getUiApplication () .requestForeground ();

  I need to check my application is running in the background or forground? someone help me how should I detect that my application in what state?

  {if (condition)}

  System.out.prinltn ("application run in Background");

  }

  Else if (condition111) {}

  System.out.prinltn ("application in the foreground");

  }

  What is this condition? and condition111? Please help me with this...

  Thank you and best regards,

  Ajay Patil.

  Hello

  With the help of UiApplication.getUiApplication () .isForeground (); You should be able to determine if the application is in the foreground. Hope that helps.

• How to configure the application runs at startup under netbeans?

  Hello

  i've got app that extends the Application. I want to start after installation and after each reboot of the device. I know it can be done very easy-properties and setting "auto-run" under eclipse Drinking now, I started using netbeans-does anyone of you know how can I do this in netbeans? or maybe I should add proper line in the *.jad file?

  concerning

  It seems that it's not impossible. also, it is not possbile to generate the adequate *.cod file, can cause the netbeans for blackberry plugin is very simple and do not have a lot of options, it should have. It looks like this project has left behind a year or two he y a. and it seems that he has only jde or eclipse to choose.

  concerning

• Smartphones blackBerry how to stop the application running behind

  Dear bb

  I had black berries "BOLD" 9000, all here, and then "small black clock pops out" (indicated an application running behind) how stop this application? 2 clear and 'logo' black Berry mobile report

  You will always get this little clock if your memory is pushed to the extreme.  If it happens often, and it interferes with the proper functioning of your phone, remove your battery when your phone is turned on, then replace it a few seconds later.

  At any time, you want to know what apps are running, you can press on and hold the menu key.  Some functions such as phone, Messages, browser, etc will always be running.  If you have more than just running at any time, you can close each down by opening the app, pressing the menu key and selecting close or exit.

  Let us know if that helps.