LabVIEW 2013 executable only works on the development machine?

Similar Questions

• Satellite A210 - 10 c only works with the 800 Mhz instead of 1.6 Ghz

  Hello

  I have a very big problem. One day, I look in Vista on my resource monitor and see that the max freuquence is only 50%.

  So first of all I think that is no problem because the assets 'energy savings' energy recorded.
  I have a Satellite A210 - 10 c portable.

  So I switch to maximum power and perform a test of prime95. But hell, the max freuquence has not changed. I also installed everest and cpu z, but all programs show the same to me:

  My laptop only works with the 800 Mhz instead of 1.6 Ghz!

  I'm looking for drivers for the AMD processor, but you need not for Vista. Update all the drivers of Toshiba and Programms and BIOS (in fact, it is the 1.9).

  Nothing helps.

  As a last test, I reinstalled Vista, but also did not help.

  And now I'm at a loss what to do.

  I hope someone can help me.

  Good bye...

  Have you installed the Vista using the recovery CD or the original CD of Microsoft Vista?

  I ask because the restore CD contains all drivers for Toshiba and yellow exclamation marks should not be apparently in Device Manager.

  If you used the original CD of Vista I think that you have not installed the Package of Intel Robson.

  I found the package of Robson on the Toshiba driver-> Satellite P200 area page.

  Maybe you should check this.

  Your comments would be appreciated

• BlackBerry Z10 headphone only works with the left ear

  My headphones (beats studios) only works with the left ear when connected. The helmet has never had a problem on my old iPhone 4 and currently with my rMBP so I know that's not the headphones. Any suggestions?

  There seems to be a problem with the jacket of the head. They are defective for a few pieces and the jacket cannot recognize the HP in the same case, what makes the phone to give no sounds on the notification.

  Try to use different headphones. If the problem persists try replacing the model.

• Hello. I have the DVD of Lightroom 5.7.1 version. He just started is behaving badly and I've deleted and reinstalled the product. When I'm in the 'development' module, I get random stains of color in my images. This only happens in the develop module and

  Hello. I have the DVD of Lightroom 5.7.1 version. He just started is behaving badly and I've deleted and reinstalled the product. When I'm in the 'development' module, I get random stains of color in my images. This only occurs in the develop module and no where else. It also does not reach any other software or area on my pc. I also changed the cable and the same triesd another monitor. Anyone have any ideas? Thank you.

  Are patches of red and blue color?

  If so, you probably have warnings of cutting of light/shadow enabled. Press J to hide them.

  You can also activate their power by clicking on the arrows up left and right of the histogram.

  Salient facts cut medium red, medium blue clipped shadows.

• Having a problem with the RL today.  Cursors do not work in the development section.  I use LR CC - latest version, OS EL Capitan.  Cannot close LR either.

  Cursors do not work in the development section.  I use LR CC - latest version, OS EL Capitan.  Cannot close LR

  Guess he decided to work on its own.

• CSS only works on the page and not in the css doc

  So I have the following code for the shadows: h3.a {text-shadow:-50px 50px white, 1px 1px #00F}.  I put it on my css doc which is connected to my page, but it does not appear.  then I put it in the top of the page, and then it appeared.  Why it only works on the page?

  I just passed something like that for a few hours yesterday and realized that I was not saving the page external .css real after adding new styles.

• Why build application vi works in the development environment, but not in the executable file; error 1025

  Hello

  I have a request ('A') that I am trying to build another application ("BuildA").

  I can create a request for A manually of its project using the Build specification, and it works fine (A.exe).

  Also, when I run BuildA.vi in the development environment he calls the "Build.vi" properly and again generates application A.exe very well.

  Then, when I ask BuildA (manually) and run BuildA.exe, I would expect that it also creates A.exe as BuildA.vi did in the development environment.

  However, it fails with the error:

  Code: 1025

  Reference VI opened in .vi NI_App_Builder_API.lvlib:Build (path)-> BuildA.vi
  Path of the VI: C:\TEMP\AppBuild\BuildA\vi.lib\AppBuilder\BuildTarget.vi

  I noticed this thread , which looks like a similar problem, but has reached no conclusion.

  Why BuildA.vi works fine in the LabVIEW environment, but the application that builda.exe does not work?  All paths are hard-coded, so it shouldn't be a path problem.

  Thank you

  -john

  eye_in_the_sky wrote:

  I guess we will have to keep the application building separated the disappointment... automated scripts

  There are still other options.  Lets say configure you VI to run then.  If you ran the following command from your script line

  "C:\Program NIUninstaller Instruments\LabVIEW 2011\LabVIEW.exe" "C:\BuildA.vi".

  It would then open your BuildA.vi in LabVIEW and run in the development environment.

• Typeset only work on the platform built on the Web site

  Hello.

  I'm going to build a Web site that is currently on my development server. http://www.thepointnet.com/NovaTec-development

  I use a Typeset font (make-family: ' Fira without ";) in the CSS and it will only appear on the site when I view it on the same Mac as I build the site on.)

  Seen on a smart phone or on another PC it's just default the without police.

  I've lived any suggestions for troubleshooting Adobes does not.

  Someone at - it indexes?

  Thank you

  Joe

  Hey Joe,

  I'm sorry that you trouble with that. The CSS on your site uses the font family name "Fira without", for example

  {.navbar-css

  color: rgba (255, 255, 255, 1);

  do-family: ' Fira without. "

  do-size: 130%;

  make-style: normal;

  Police-weight: 300;

  }

  The name provided by Typekit is "fira - without", with a hyphen. The browser is looking for a locally installed version of the police currently, rather than the files provided by Typekit.

  If you update the CSS file to use "fira - without" everywhere that you have "Fira without", policies should begin to work in all browsers and operating systems.

  (For later use, you can check the last name of Typekit in the Editor Kit by clicking on the link "Fonts in CSS using" selectors):

  ( https://helpx.adobe.com/typekit/using/css-selectors.html)

  If please give that a try and let us know if you have any other questions!  Best,

  -liz

• Apple tv only works on the left speaker

  Through any HDMI input audio left is the only work, regardless of the selection of entries.

  Two audio channels running on all HDMI inputs when tested with a DVD player, had the same problem with Google Chrome and referred to the shop. Everyone knows about this phenomenon?

  carpet

  It would sound as if you have confirmed that the question must be with the device and is not the cable or TV. How old is this particular Apple TV? It is still under warranty or AppleCare?

  TT2

• DataList does not work in the developer edition

  In other words, there is no support for the functionality of Firefox Developer Edition 38.0.5 HTML5 Datalist.

  You can test this by displaying the page in any browser...

  https://hacks.Mozilla.org/2010/11/Firefox-4-HTML5-forms/

  And you'll notice that it works for the most part, everything except the browser Firefox Developer Edition.

  Question on StackOverflow: http://stackoverflow.com/questions/30790027/html5-datalist-not-working-bug-in-firefox-developer-edition-38-0-5

  Is this an oversight? A bug? It is slated to be fixed/fixed already? Or I will begin do are aware of the problem? Thank you!!!

  The current construction of (aurora) Firefox is Firefox 40.0 a2.

  The demo page works fine for me with the current version (38.0.5) and the current construction of Developer Edition and the selection list opens with a double click.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• L50-B-1NM satellite - wifi only works near the router

  Hi just bought this laptop for my daughter Toshiba L50-B-1NM 15.6 inches processor Ci3 4 GB 1 TB and wifi only works if he was sitting next to the router.

  It will connect to the internet if the ethernet cable is connected, BUT for wifi, the laptop has been sitting almost touch the router. The rest of the House works well.

  Please could you help me before I take it back to the shop and eventually making a fool of myself.

  I'm really not good with technology so if you do not answer could you explain to me like a baby please ;) lol

  Thank you very much, totally disappointed at the moment because it cost me a lot of money for it :(

  Hi maria,

  I think you should consider a fact: the L50-B-1NM Satellite was equipped with an Intel 802.11ac + card agn combo Wifi/BT.

  802.11 AC is a new WLan standard that isn't taken care of by all old WLan routers.
  But of course, the standard 802.11 A / G or N must be supported by older devices correctly.

  I think first of all you must check if the wireless performance question isn't related to energy saving settings. I guess during wifi problems, the laptop uses battery power
  In this case we would use different power plan settings.

  Please check the settings that are in the advanced within the current energy saving Central WLan power settings.

  Where this doesn t help you solve the problem of WiFi signal weak, you should contact the authorized Toshiba maintainer to check the connection to the WLan antenna.

  It may be possible that the antenna isn't properly connected, which is originally a weak WiFi signal.

  Because the laptop is under warranty, it should be fix toll-free number.

  Greetings

• The mouse only works in the active window and cannot select drop-down menus (W7)

  Hello

  I can't understand what is the cause. I can only select things in the active window with my mouse, I can't move the window, I can't click on anything whatsoever outside of it.

  ATM by writing this, I can not open another program or select the bar of tasks or do anything outside that window. (unless I use CTRL-ALT-DEL and force to select a new active window with my keyboard)

  Another thing is that everything works within the window, except one thing, menus drop down, I can bring up the menu drop-down but can not select anything on the menu.

  I reinstalled windows to do this same thing. I can't understand why windows doesn't let me choose some things outside my main window, it's that I'm sort of protected mode.

  Thanks for any help

  Hello

  -What is laptop or desktop?
  -What is the brand and model of the mouse? Is it wired or wireless mouse?
  -Have you tried plugging the mouse on another computer?
   
  Method 1: I would also say you update the drivers for the mouse on the computer and check if it helps.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 2: Also, I suggest you use Microsoft Safety scanner to make sure that your computer is free from malware and check if it helps.
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.
  Method 3: I suggest you try to check with the other mice to make sure that the problem is not with the computer.
   

  If it is a laptop, I suggest you to check if a FN key function is to to do this. As you are facing the issue after reinstalling the operating system, I also suggest you check with the manufacturer of the computer, if there is this key.

   

  Hope this information helps.

• Palm tx only works with the charger plugged

  My palm that TX only works when it is plugged into the ac charger.  The symptoms started after I left unused device for about 2 weeks.  When it is plugged in, I get the symbol of battery charging.  The battery icon says 100%.  As soon as I unplug the charger, it dies.  I left it plugged for 2.5 hrs and still does not work when I unplug. I tried to reset hard with no improvement.

  Do I need new battery?

  Thank you

  A last ditch effort - connect the charger and press the reset button.  Let the TX through a soft reset and let it charge for a few hours.

  If still no joy, so yes it looks that your battery has reached the end of its useful life.

  Many places online will repair it for you, or allow you to buy a battery and DIY.  See directfix.com for a video on the TX of repair.

  WyreNut

• How to save raw files on an external drive but the hard work during the development?

  I want to save my raw external hard disk files, but when I work on copy them some files on the hard disk of the computer is faster and when I finished to remove hard drive but continues work to develop, so next time I'll get the file from the external drive it will show develop it I created. How can I do this?

  Thank you

  ts3287 wrote:

  I want to save my raw external hard disk files, but when I work on copy them some files on the hard disk of the computer is faster and when I finished to remove hard drive but continues work to develop, so next time I'll get the file from the external drive it will show develop it I created. How can I do this?

  Thank you

  In fact, I don't think that smart insights do what you ask, although they could be a solution to a different problem. Smart insights are especially useful when the external drive is not connected (that has not been mentioned in the problem statement).

  In general, the workflow of moving pictures on an internal drive, changing them, and then remove the pictures back to the internal drive is unnecessary extra work that adds almost no advantage. There is such a difference in small speed based on the speed of drive when you load a photo into the development module that you may not notice, and it can be eclipsed by the time it takes to move the photo. Ian Lyons did a study and in most cases, the difference between editing photos on a hard drive internal and editing photos on an external drive was small fractions of a second.

  So my advice to you is just to let the pictures on the external hard drive, no moving pictures from here to there, not too much space on your internal drive with smart insights.

• CS-3-Viewer - works in the development system - a site failure (not all)

  I looked at a number of topics of discussion on the CS - 3 view Image slideshow doesn't work is not on the Web site.  I have the AC_RunActiveContent.js file located in my folder of Scripts on the site.

  I correctly opperating slide shows working on the site - is a good page - http://www.billyandgracetea.com/Contact1.html.

  A slightly flaky page is - http://www.billyandgracetea.com/Photo1.html.

  And the page fails totally is - http://www.billyandgracetea.com/Summer2010-Pics.html.

  The page but which totally fails - working properly in my development system-, fails on the site.  It works properly with the Play button, and also when I compile the page with the key 12 function (although I wonder if I want to allow the Active X).

  Flakey page - does not always work through all the 18 sides - sometimes running 1 to 7, then return 1, etc.

  The file system for all html files is the same on the website.

  How can I fix the page that fails completely?  18 side in the puff page - too many sides?

  On http://www.billyandgracetea.com/Summer2010-Pics.html

  This path is correct?

  Which points to

  http://www.billyandgracetea.com/pictures/flashslide-3AA.swf

  File not found