PRI HDMI TV Accident

Similar Questions

• HDMI Audio driver disappears after the RDP session

  I have a desktop PC that I use as a HTPC. It is running xp pro sp3. I have a graphics card Radeon HD5570 I use to connect it to my TV via the HDMI interface. I recently had a car accident and had to rebuild the system disk (re - install windows, drivers, etc.). I also have access to this computer from my office by remote desktop.
  Here's the problem: I'm going to start the machine and the sound will come through the HDMI audio device on the graphics card. Later, I will connect to the machine remotely, and sound come RDP to my work PC. I'll cut and go home, but the HDMI audio device will no longer work until a reboot. HDMI audio is not listed in the menu sound options, but it shows up on Device Manager.

  How can I keep the computer from the oblivion of the HDMI audio device when I connect to RDP?

  If you use the catalyst driver version 12.4, there may be a bug in the driver as described in the following link:

  http://devgurus.AMD.com/thread/159106

  If so, try a different version.

• Update NVIDIA problems: exit HDMI does not.

  Hello

  So I've updated NVIDIA GeForce 8200 m G yesterday to the new version (285.62). I had the 186.68 version ou.85, I don't remember. When I tried to connect my LCD HD TV to my laptop, it has not worked, everything was the same. So I tried to go to control panel > Mobile PC > to connect to a projector... > Connect monitor and changed the setting so that the display show only on the TV. When I click 'OK' my computer screem black but I could still see the light from the screen, and nothing happens. No video, no sound. My computer buttoned up like that and then I had to restart.

  So, I'm looking to see what was wrong and found that a lot of people where having the same problems, but for a different computer. I see that some people just had the old version that they or an older version then v280 I come, I tried it and got v275.33 and still the same thing happens. The computer recognizes it, but nothing happens. Just black screen. I also tried restoring but I re-installed so it did not work.

  I don't know how to get my old rear drive, if anyone can help me? Does anyone know how to fix this? Connect to my HP PC to my TV. I have the HDMI cable and it worked in the past, so I think it was the update.

  HP G60-121WM

  Windows Vista 32 bit

  NVIDIA GeForce 8200 M G 1407 MB

  If somebody finds the problem, you can send me a link? I also tried to make the 'system restore', but I just continued to get a failure message. If you need more just informationg say.

  Thank you.

  P.S. I also saw this chanded "NVIDIA audio HDMI" "NVIDIA HD Audio" but know that he just says "High definition Audio Device", which could take place? In addition, the site NVIDIA said that I need to uninstall my NVIDIA Windows display drivers. I did and when go out to uninstall. This is not, but I have v275.33 Verde drive that I received from NVIDIA Web. I did something wrong?

  http://www.nvidia.com/object/IO_13955.html

  Yes, I see and it always the accident when I use it.

  However, I think I solved it. I just when the HP, shearch for my PC website and downloaded the reader but I had already that don't but did ' t work. I keept getting a message that I was not under windows vista. Then I opened the file from the disk I have download and when Windows 32 folder and it had a probram for installation.

  I tried and the installer has just stood there, not doing nothing. I closed by using the the windows Task Manager ("ctrl" + "alt" + "del") and run the driver installation program again. Before I could click on the button continue, my screen will turn off and on to turrn. So I plugged the HDMI cable and when to the NVIDIA Control Panel and made my tv the 2nd screen but the sound does not work.

• How to get back my HDMI configuration option in Control Panel?

  When I go into control panel > sound, I still have 3 choices of configuration:

  1 - HDMI (for AMD).

  2 - speakers and headphones

  3 - independent headphone

  During the reconfiguration for a movie running in my HP Pavilion laptop dv7, (Windows 64-bit Home Premium Edition), I inadvertently turned off the HDMI (for example, I chose him "do not use this device").

  Of course, he has subsequently disappeared from the list of choices.  Now I can't get it back.

  How can I get that back?

  Help, please!

  Thank you!

  Salvation Roman Tan,

  Thanks for posting your query on the Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. I suggest you to consult the steps described in the following discussions and see if it helps you to solve the problem. Make sure that you follow the steps that are marked as answer.

  HDMI Audio not detected

  You can also check the following thread and see if it helps.

  I disabled my HDMI sound by accident.

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Display failure DVI to HDMI

  Recently, I bought a DVI to HDMI connector for use of my graphics card than Geforce 550 TI in my twenty six inch brand TV Toshiba (not aware of the name of the template). I also met dvi to dvi my monitor, which works very well. For a while, I was able to use both at the same time or separately. Quite recently, however, during the execution of the two, I accidentally put my TV as my main instead of my sixteen inches HP w1907 screen, causing some kind of accident. Now whenever I plug the second TV, both black and my audio temporarily stops then continues. It still seems to take at least my microphone input, judging by the fact that Skype call, in that I was still worked and still make sound, but two monitors just turn completely black and will not display anything. Help, please.

  In addition, the TV still works all by using a VGA to TV with a VGA to DVI, simultaneously and individually, and he works as my main monitor without crashing.

  Hello

  When your computer does not display anything on the screen, you have a problem no display or blank display. This may be caused by one of the following reasons:

  · Monitor or system has no power

  · The monitor is defective

  · Connecting the cable loose VGA(Video Graphics Adalptor) /DVI(Digital Visual Interface)

  · Video card problem

  · Problem connector AGP (Accelerated Graphics Port) /PCI (Peripheral Component Interconnect) EI / motherboard

  · Problem of RAM (Random Access Memory)

  Click on the link mentioned below as a reference:

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  Good day!

• I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  You can use it with your TV.

• Presenter PowerPoint on Mac mini mode displayed on the screen and the projector when using HDMI splitter

  We have a Mac mini connected to a screen and a projector via HDMI using a HDMI splitter.

  It works fine for most applications, but during presentations PowerPoint, presenter is displayed on the monitor and the projector.

  When I disconnected the mini Mac's HDMI cable and put it in a MacBook, the presenter appeared on the MacBook screen (as it should) and only the slide appears on the screen and on the projection screen.

  Of course if we have to use the MacBook for presentations instead of the Mac mini, you would need to have seen the presenter on both the screen and on the screen of the MacBook.

  In the Mac mini display preferences there is no button to "Gather Windows" when the Mac mini is attached to the screen and the projector via HDMI splitter is a tab "setting."

  But these two things appear on the MacBook when it is connected.

  Any help would be greatly appreciated.

  Thank you!

  Mike

  

  

  I'm confused. When you use a video separator the same screen will appear on the two monitors connected to the separator. This is how works a separator

• External display on HDMI overheating my Mac and drains the battery badly

  Hey guys.

  I am using a MBP retina 2012 15 inches with an external monitor, a generic LCD 1080 p via HDMI without problems. And recently updated for Sierra.

  The question starts immediately when I plug it into the screen. The Macbook seems to overheat and run fans above 4000 rpm, which is very audible and boring. CPU and GPU temperatures go above 70 degrees C (normally they make 50 +). The battery holds for only 1.5 hours, generally works well for 4-5 hours.
  I tried killing all apps, followed a bad process in activity monitor, changing default resolution - nothing helps so far. The CPU is barely used by 10%, the memory pressure is fine.
  It's just that time when I plug the screen - Mac starts bad feeling. Never, the problem occurred on El Capitan. Maybe it's a GPU problem, but certainly caused by the OS.
  All the world had the same problem?

  Try resetting the NVRAM (hold down the command-option-P-R on startup).

  Also, try to restart in Mode without failure, then normally again.

  Finally, try logging into your account, sign in to a user account (or the guest account) and connect the external display. Same problem? If it works fine for a new account then it's something in your own account which is the cause - perhaps an element of connection or some other system changes induced by the operating system previous and who does not play nice with Sierra.

• HDMI Splitter El Capitan - Sierra

  I changed my MacMini (end of 2014) to El Capitan in Sierra now. The MacMini is connected to my BENQ via a HDMI splitter. After changing the operating system, the monitor not connect standby while starting the MacMini. Connect the Mac directly to the monitor does not cause this problem.

  Someone at - it had the same problem a solution for this? Thank you.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

• HDMI to Vga 2015 Mac

  I have a macbook pro with the retina display 2015. I have a vga screen and a hdmi adapter. Whenever I connect the Hdmi adapter on my mac and plug on my screen of my Mac screen to him becomes black and it does not work. Can someone please give me a solution thanks.

  There is no sensible way (that I know of) to convert HDMI to VGA and have everything continue to work.

  I suggest get you an adapter Mini DisplayPort to VGA and plug on the Thunderbolt port (Mini DisplayPort is a subset of the Thunderbolt).

• The macmini split audio video hdmi using mini stereo out?

  Hello

  I need to play a dvd for the first time next week - for a public event

  using the mac mini mid-2011, i5 2.3 ghz, superdrive, yosemite

  using hdmi connector as the video signal on a vizio tv and...

  I need the audio output through Jack for headphones (stereo mini) for an audio mixer.

  Y at - it no problem with that or everything simply select the audio output from the audio out of system preferences?

  I guess that it is the same thing as my Macbook Pro, where I did just that - if you plug the cable into the headphone jack, it should work without needing to select the output in the Prefs. If you check with a helmet, you must confirm this. Having a video output running will not affect this.

• 1440 p monitor recognized as 1080 p over HDMI

  I've updated to Sierra yesterday, and now my ASUS PB278 displays 1080 p instead of its native 1440 p over HDMI. This monitor has worked flawlessly with El Capitan and Yosemite on HDMI.

  I also tried to connect more love at first sight with an HDMI adapter and that no longer works.

  Anyone else having this problem?

  Well Yes. Exactly the same problem you described. In light of this + problems with drivers for my Performance MX Logitech mouse (restless as hell scroll), immediately restored to El Capitan.

  Will be held off the coast of the upgrade until this issue is resolved.

• tvOS 10 update breaks DD5.1 on Apple TV output 4 HDMI

  Then, I upgraded tvOS 10 last night. Now, all the movies content on Netflix or iTunes won't play with audio when I output 5.1.

  I have my TV connected to a HDMI/optical splitter so that it can feed my Sonos Playbar. Prior to the update of the audio has been correctly be pulled the HDMI cable and divided optics 5.1 true, as stated in my application of parameters of Sonos. Since the update, I have to stereo to get all the sounds, which is so obviously not true 5.1.

  Someone else had this problem? Any ideas on a solution?

  Thank you.

  Try the Bike ATV power and sound systems. It is working for me with HDMI to TV and optical out to A / V receiver. It has no reason for the software of the ATV to make it different than before.

• HDMI port defective by design?

  Same problem here - I want to (Oh, man I need) to be able to use my HDMI port to make presentations on an external monitor.

  I recently converted to the technosystem to Apple after being forced by the former employer to abandon in favor of Windows Apple more than 20 years ago.  I like how the iOS works (for the most part) and this terminal is for access to tools based on unix, but for something as simple as a faulty HDMI port - by office? -not what I expected to get my new Macbook Pro.  Laptop my wife 4 + years Windows has an HDMI port that works very well. But my new Macbook Pro?  Nada

  This is not only annoying, but also effects me professionally. I need to be able to use some external displays of various flavours to present my services to potential customers.

  Come on Apple, you can do better than that!

  (1) not talking about apple, it is a form of voluntary

  (2) iOS for smart devices, OS X for laptops, desktops, iMacs, Mini

  (3) you need a lightning to HDMI converter

  http://www.Apple.com/shop/Mac/Mac-accessories/power-cables

• When I use HDMI to connect my macbook to the TV - it lights for a few seconds, then disappears?

  When I use HDMI to connect my macbook to the TV - it lights for a few seconds, then disappears?

  I tried all 4 HDMI ports

  my computer is 2013 macbook pro retina - tv is a 1 year old samsung

  Try this support article > use your TV as a monitor

  If you have an Apple TV, you can use AirPlay to the screen of your Mac on the TV via HDMI.