Priming of the AP

Similar Questions

• Two sets of two short beeps appear during the priming of the old Satellite Pro series

  Laptop was upgraded and repaired, with the new memory, DVD and hard drive in April.
  Also XP SP3 isntalled.

  Last week, I turned it on and windows was loading, I've heard two sets of two short beeps.
  Rest of the laptop seems to work ok, bar NIVDIA towers problems when I turn off, but I have now the laptop as I want and I worry about those beeps. Of course, guaranteed for repair was three months, and who is just exhausted.

  Oh woe is me. Can anyone? I can't reinstall everyting all again. Too old.

  A surfer very silvery with a phobia of beep.

  Hmm. I m using CCleaner also but just to clean the files in time and repair the registry, I never hear two beeps in missing hardware/driver, so for me, this does not look like CCLeaer that would solve...
  But two beeps sometimes appear when starting the laptop, this could be the sound POST (self-test notification under tension).

  However, you should also check if these two beeps would be available after the installation of new OS (new installation).

  Welcome them

• What is: "hard disk:S.M.A.R.T. bad condition, save & replace press F1 to resume ' sometimes during the priming of the AOS?

  This message is from time to time.  My computer seems to work very well.  Is there a diagnostic program to determine the health of my hard drive?  This computer is a Soyo Dragon2 running windows XP #3 Office.  I tried to Soyo. com & URL no longer works.

  SMART is a disc auto diagnosis and reporting mechanism.  If you receive INTELLIGENT warnings, you should immediately back up all your data and/or make a disk image.

  After you do that you can download more detailed drive diagnostic software from web site by the disk manufacturer, but the chances are that your drive is about to die.

  ------------------------
  * After you have backed up your data, you can determine the manufacturer of your hard drive (which is not Soyo, which has set up the computer) by opening the Device Manager (start > run > devmgmt.msc > OK) and expand the category of "hard drives".  Although there is a line for "manufacturer" in the view of the properties of the drive, it says generally and unnecessarily "(Standard lecteurs de disque) '." "  Instead, look at the name of the device.

  You should be able to recognize the room; If this isn't Google the name of the product.  For example, one of my drives shows as "WDC WD2000JB-00EVA0." If I didn't know that 'CMD' meant Western Digital Corporation, a search of WD2000JB or WD2000JB-00EVA0 quickly would reveal that it is a Western Digital EIDE of 200 GB disk.

• can not start after the installation of 10 Windows via bootcamp OSX

  Hello, I need help.

  I tried to install 10 Windows via bootcamp, and I did it successfully with no problems. However, after the installation, I restarted my computer, hold down the option key and tried to boot into OS X, but it won't work. It would be a symbol that boot lead me to windows 10!

  all solutions? I do not have a backup of my files under OSX, I lose my files?

  NOTE: when I formatted the partition for windows, he said not bootcamp next to him, but it is clear that the partition that I had to format, it is the same size that I decided to make Windows when I was in bootcamp in OSX + it was empty at 100%.

  UPDATE 1: so I managed to get into the recovery of the internet and deleted the partition that had the windows and install OSX Marverix instead (temporarily) also, I fixed the hard drive MACINTOSH HD, but now I can't boot it at all when I press the option button during the priming of the mac. all solutions?

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• Updating the BIOS is dead the satellite Pro P300-1AY

  Hi all

  found this forum and really hoping that he can help me!
  I bought a satellite Pro P300-1AY two years ago, it cost me £900 nr so I thought it would be worthy of a purchase.

  A year ago the USBs stopped working, I do it every working solution I could think of anything will do, finally gave up and learned to live without USBs!

  However, a few weeks ago, the laptop at the start stop, I didn't get was the black screen. Probably a video problem I did all the memory check hard drive everything else, however, it was only an intermittent problem, I found if I he tilted on the side she would begin, another thing to live with!

  But two days ago, I heard that if I've updated the BIOS, it could solve all my problems. so I went to the Toshiba site, found the BIOS updated and downloaded, but to halfway through the installation, the laptop froze and I couldn't t he put it off and had to take the battery out to turn it off!

  And ve you may have guessed, he's now won t start. Even its worst, LED lights, and if I put a disc in the cd I can hear it whirring, but that s it.

  Is - this irreparable? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?
  Ty for your time in reading :)

  Hello

  > Is it irretrievably? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?

  Well, usually the BIOS could once again be reflashed, but you would need a traditional version of the BIOS update.
  This version is available for Toshiba FSA.

  So you will need to get in touch with a local ASP technician that could reflash the Rom BIOS module.
  Eventually, after this update the specifications would be stable.

  Good luck

• Tecra M3 - BSOD if I install the graphics driver

  I bought a Tecra M3 about 4 years ago. He has recently started to give the BSOD.

  I started in safe mode, and it is fine. I uninstalled the graphics driver and rebooted and it works - just without the graphics driver. As soon as I reinstall the graphics driver it BSOD.

  I'm sure that the GPU/VRAM has a problem of 99.9%. Sometimes as the priming of the laptop there is a random corruption on the screen (before xp load).

  Of course, the GPU can be replaced without replacing the motherboard together. Replacement motherboard is 800AUD + 200AUD for install it.

  In the google search; I found many people with the same problem. Perfect condition laptop Tecra with dead graphics.

  The Qosmio is a reminder for the defective Nvidia GPU. The M3 has a Nvidia GPU. Why it can't be fixed too?

  Hello!

  BSOD code, you get exactly?
  Maybe the problem is a driver or a software problem.

  You try to install display drivers from Toshiba or Nvidia website?
  Have you tried reinstalling the laptop using the Toshiba Recovery disk?

  Sorry, but for the moment I can say more about it.

  Good bye

• Without LAN connection after logon applied credentils it takes a lot of time to load items on the desktop

  Original title: startup problem

  during the priming of the laptop without LAN connection after logon credentils applied it takes a long time to load the items on the desktop, but by connecting the laptop with LAN a boot of the computer LAPTOP, all right, please provide a solution for this problem of starting.

  Hello

  I removed IE 8, now it works fine

• Get the black screen at boot: status: 0xc000000f

  Original title: status: 0xc000000f

  I get a black screen when I turn on my laptop (Windows Boot Manager)

  Windows could not start.  A recent hardware or software change might be the cause.  To solve the problem:

  1. Insert your windows installation disc and restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  I followed all the instructions and still it will not read the installation disc.

  I put in the disk and restart the computer, but it brings back me to the same black screen.

  File: \Windows\system32\winload.exe

  Status: 0xc000000f

  Info: The selected entry could not be loaded because the application is missing or damaged.

  Can someone help me with this question to where it will read the disc. or what I am doing wrong?

  I got Appreciate your help :)

  Ok.

  You can watch the image here - is your BIOS looks in this picture:

  https://SkyDrive.live.com/#CID=23FD66EFD8D06B76&ID=23FD66EFD8D06B76%21177

  If so you can try everything first:

  (1) turn on (or restart) your office

  (2) press on instead of - you should see "Start menu", where you must select "Drive of CD-ROM.

  If does not work (this means no "Boot menu" only appeared), then you need to change "Boot Device Priority" - go into the SETUP (   course of priming of the desktop), use the right arrow to select 'Boot' (upper image) - use the down arrow to select "Boot Device Priority" and press enter - you should see something as shown in the photo at the bottom.

  Now choose "Drive of CD-ROM" (arrow down) and by using the key + or - move the first CD-ROM drive. Press on (save & exit).

  Use this DVD:

  1. MICROSOFT WINDOWS VISTA HOME PREMIUM SP1 X 86

  LC

• Add the new hard drive, windows does not start now

  OK, ill be as specific as possible here

  Ive always had a few hard drives in my computer at all times

  A few days ago, I had problems with my windows 7 install that I tabled to the installation while I had all of my hard drives connected at installation time.

  2 days ago I decided to start over fresh with a windows 7 ultimate 64-bit. I also bought a new 64gig OCZ SSD for my OS.

  I disconnected all my drives except the SSD and performed a complete installation of windows 7 and all a well worked first go again.
  I then started to shut down my computer and adding a hard drive to the times and re starting and in ensuring that the drive letters came back how I got them I had on my previous built and changing them were nessisary.

  I installed my 5 drives in this case and the computer rebooted fine and everything was perfect until!

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4. 320 GB movies
  5. 320 GB games

  I copied all HDD 4. movies (only movies and music files) on disk 3.
  then I removed the hard drive of 4 and replaced by a new hard disk 1.5 TB and restarted the computer
  the computer starts very well and once loaded windows I coppied the movies and music of the new 1.5 TB hard drive back.

  now, I had

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4 movies 1.5 to
  5. 320 GB games

  This is were the problem started. I restarted my computer and it wouldn't start. He gets the message of realteck and just a cursor flashes and remains like that permanently.

  If I remove the sata cable to the back of the hard disc 4 the computer starts fine
  I can plug the cable in just before the windows screen comes up and the hard drive works fine and is FLEURIDAS and all.
  but leave it plugged during the start of what the computer does nothing

  things I've tried, I made sure all my boot priorities are pointing to the SSD drive
  I have turned all devices normal priming and the hard drive with the OS selected
  Ive made sure that all the drive letters are correct on each drive
  Ive tried to get started with the windows 7 CD to get to the repair section and I click Repair tool, start it recconises there is a problem but informs me it can not be fixed automatically and asks me if I want to send the information to microsoft (which me).

  It's really made me this one any help will be great and thanks in advance

  just in case sick leave my system specs

  EVGA X 58 mobo
  INTEL Core i7 940
  6 GB of corsair ram
  all hard drives, you know
  1000 watt power supply
  2 X PALIT GTX 295 but SLI is not currently connected

  Hi AUST_DeVinE,

  ·         Please give us the exact error that you receive when you plug the SATA cable?

  ·         After you connect the hard drive, are you able to boot in safe mode?

  Check if you are able to boot in safe mode. Link: start your computer in safe mode:

        http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  1. run chkdsk on this hard drive, follow the steps below and check, if it helps:

  i. connect the external hard drive

  II. starting the computer in the Windows recovery environment, you can check the link below: What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  III. run Chkdsk,

  Here are the steps to run chkdsk:

  i. in the command prompt window, type the following command and press enter Chkdsk/r X:

  II. Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.

  III. o press when you are prompted to check the drive the next time the system restarts.

  IV. restart the computer.

  Note: When you restart, Windows checks the drive for errors, and then Windows starts.

  Link, please refer to: Chkdsk: http://technet.microsoft.com/en-us/library/cc730714 (WS.10) .aspx 

  2. you can even format the hard drive and check if this can help, see the below link for the same: Formatting disks and drives: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Formatting-disks-and-drives-frequently-asked-questions

  3 make sure you check the firmware updates and the updates of the system BIOS

  For updates and updates the system BIOS, contact the manufacturer of the hardware in the computer, refer to the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us 

  Not even verify that the system BIOS correctly detects the hard disk

  For more information about how to verify that the system BIOS correctly detects the hard disk, contact the manufacturer of the computer hardware.

  BIOS WARNING: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• All-in-one Pavilion 23-Q227C: HP install and download Assistant does not

  Whenever my computer starts up, the HP download and install the wizard tries to run to download a driver Realtek (SP74157) and HP Support Assistant (SP71727).  It fails each time, with a pop up that says "installation HP and download Assistant works do not" and the only option is to "close the program".  Don't know if these downloads are important, but their failure every time is, at the very least, a nuisance.

  Solutions?

  @ericbro

  I'm not aware of a program that runs on the HP of other consumer computers that the HPSA who would try to install an update for your driver Audio HP's.

  • If you remove the HP Support Assistant to programs and features,
  • If you stop and restart the computer from a STOP condition (not restart),
  • who should squelch (stop) the HPSA and no subsequent download / install primed by the HPSA

  If the process is repeated even after the removal of the program and by completing a cold (boot off) start, then installation must be controlled with other than the HP Support Assistant (as you say).

  The Task Manager will appoint the HPSA program when that program (HP Support Assistant) is open (click program and run).

  The Task Manager > Details will appoint the program (HPSA) as "HPSF.exe' (executable for the HPSA).

  If the HPSA is the process that is continually download and try to install the driver, you might have to search in the list of processes (Task Manager > Performance > resource monitor) and see if you can find the rogue program.

  I think that if the driver is to download somewhere on the network, you would see a relative link / address in the resource monitor.

  I may have missed something, of course...

  If I think of anything else, I'll post.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Stuck on Start Up Apple screen logo with 50% progress bar, tried everything. Help, please!

  Hello world. I'd appreciate it really all the advice that you can offer me to help me fix my laptop. I have a mid-2010 Pro 2.4 GHz Core 2 Duo Macbook running OS X Yosemite. A year ago, he started trolling a lot, so replaced the HDD with a Samsung 850 EVO 120 GB SSD internal 2.5 inch SATA III. He works much better since.

  A few days ago, I bought a Google Chromecast and had set up with my MBP. Subsequently, he began trolling and I noticed there are apps in the Launchpad, that I had never downloaded (reader of Google, Gmail, Youtube, etc.). I could not remove these applications or drag them to the trash. Concerned, I decided to back up my files on a USB key and re - install the OS X.

  However, during the priming of the MBP, it is stuck on the Apple logo screen, with the bar never go beyond 50%. (Photo: http://postimg.org/image/66qh6x633/)

  What I tried:

  PHASE 1 (Before reformatting)

  -Safe Mode: Button power button and shift held down. Hit or miss, worked 1-2 times, but when I reboot, is again stuck at the Apple logo.

  -Reinstall OS X: CMD + R; After 15-20 minutes get to OS X utility screen; Reinstalled OS X Yosemite; 7 hours to reinstall - but when the mbp restarts to complete the installation, it is stuck at the Apple logo again.

  -Reformatting: CMD + R; 15-20 minutes get to OS X utility screen (several reboots to work); Select repair for all discs/drives (Samsung SSD, HD Recovery). Exit said that both are very good; Select clear to HD recovery. When this was done, I tried to reinstall OS X Yosemite, but the MBP shuts down suddenly. When I turned on it again, it is returned to be stuck on the loading screen Apple logo. Attempt to restart after 15 +, but same result every time.

  PHASE 2 (After reformatting).

  -Power-> CMD + R = blocked screen Apple logo with 50% progress bar

  -Power-> Option = shows 2 player and free Wi - Fi area (Pic: http://postimg.org/image/58qi2j1vl/); Have you tried all the combinations, but regardless, always gets stuck at the screen of the Apple logo to 50% complete, after an hour, I suddenly hear ' to use English as the main language... ". ", but the screen is still stuck. I left it on 36 hours once and nothing has changed

  -Power-> Shift = error (Pic: http://postimg.org/image/tahklsvy1/); Keep restarting or shows some other error (Pic: http://postimg.org/image/thstc6b59/) and restart. Never crosses.

  Tried other things:

  -Reset PRAM: When restarting MBP, is stuck at the Apple logo screen, 50% progress bar

  -Reset SMC: Stuck on the Apple logo screen for a long time and then the screen turns off, but the laptop is still on. When I press Caps Lock, the indicator light lights up. Also, after some time, I again hear "to use English as...". "even if the screen is off. No matter what I press, it does not wake up to the screen.

  Note:

  -The bottom of the laptop feels hot (maybe), but I do not hear the drive in motion.

  I am trying to save my mbp because I can't get a new one for a few months. Any advice/help is greatly appreciated! Thank you very much!!!

  P.S.: I only am not too computer savvy, please use everyday words words/non-tech, when possible, thank you!

  Remove the SSD and install it in a closed Chamber.  Connect it to the MBP via USB.  It will start?

  Ciao.

• Disable SecureBoot

  Hello

  I tried to disable SecureBoot and activate the priming of the inheritance. It is a fairly simple process, press F10 to enter the BIOS, highlight the appropriate area and press F5 on the Legacy boot to enable it (which automatically disables SecureBoot). I tried this quite several times and each time had no success. I change this setting and that you restart the computer every time it just ends with Legacy Boot disabled and enabled SecureBoot. Yes, I'm saving the settings, if I change other parameters (such as virtualization) they save. Anyone got any ideas on why I can't save these settings after changing their?

  Edit: I forgot to mention that I have a HP Envy 15-U010DX. I have also updated the BIOS and spin the latest version.

  Thank you

  Zeldo

  Contact HP for warranty repair.

• Tecra A8 headphones no sound on internal speakers & headphones but USB works

  Dear all,

  Helmet series Tecra A8, even during the priming of the sound system and no sound on my laptop speakers are not there. While u connect headphones and speakers via USB port, it works. All other normal r operations.

  My laptop runs on windows xp sp2, all drivers are installed, even I tried to reinstall the drivers (realtek) toshiba Web site sound, does not help. Please can anyone help in this regard.

  Kind regards
  Issue

  Hello

  I read on the similar topic here in the forum
  In most cases, this article from Toshiba has helped:

  + Audio cut off (no sound) after you install Windows Vista +.
  http://APS2.toshiba-tro.de/KB0/TSB7C021B0001R01.htm

  There is a tool that disable the 'secret' (even if the mute checkbox to control Volume for Windows is not checked)

  It is a buddy to try

• Acer aspire s7-392-9439: lack of default boot device or startup failed.

  Hello
  I bought an Acer aspire s7-392-9439 3 months ago. It has been working fine, until yesterday.
  I turn on the computer and it poped a blue screen with the error: 'lack of default boot device or startup failed'.
  This error reminded me that a message on a bios updated poped over a few days and I have the chance to install it.

  I contacted acer support, I was told that the update of the bios would have avoided this problem. Also, they told me to try things that can help, but unfortunately none of them has:
  1 restore the default bios settings.
  2. change the bios settings: uefi to legacy.
  3 type the Windows key + c when the computer starts.

  When these options do not have they said it is probably a hardware problem and I should send my computer to their repair center.
  My questions are:
  1. If they updated bios would have prevented the problem, how can it be a hardware problem?
  2 - does anyone know how to solve the problem?

  I would appreciate your help,
  Michael

  I had the same problem.  Tried the diskette of starting BACK and did not work.

  Here's how I solved it:

  (apologies to memory are some terms is not on-site)

  1. download the Setup file of the BIOS - link provided above in this thread (isST2212.exe)

  2. on a Windows 8 machine that works - search for 'Create a recovery disk' and run on a USB drive

  3. copy the file #1 to the USB drive once it's done make a recovery disk

  4. in the Acer BIOS (press F2 during startup), change to the method of priming of the legacy

  5 save and exit

  6. turn in the BIOS and move the option USB HDD as first boot device

  7. Save and exit

  8. you will end up in a Windows 8 recovery console

  9. go to Advanced Options - find the option that leads you to the command prompt

  10. from there I went to d: drive and found my file isST2212.exe - run by typing the file name when you are in the folder

  Make sure that you are connected to power - let it run.  It should install, automatic restart and you should be in business.

  I had an Acer offer to fix it for free with a 7-10 day turn around and at the risk of losing all my data.  It's a much better solution!