Print images in grayscale with color covers

Similar Questions

• image to grayscale to color

  I have an image in grayscale I placed in Illustrator CS6. I would change the black to a Pantone color - turning it into a kind of Duotone.

  Is this possible or do I do in Photoshop first?

  I found a way "descendant" to do so using the change > > change the colors. But I must first choose to invert the colors, then adjust the balance of color..., then set the color opposite mode CMYK, then invert the colors even once. It is a major concern and will not work with a Pantone color.

  Thanks for your help, everyone.

  -Scott

  If a raster image, simply apply the Pantone color as a fill color.

• Unable to print on Windows 8 with Color Laserjet 1600

  I installed DOT4x64.msi on my new laptop HP Windows 8, since this seems to be the only average current to connect my Color Laserjet 1600. The printer will now appear in the section "Devices and Printers" Control Panel.  But when I try to print something, I get an error message that says that I can't print to the printer. I spent nearly an hour on the phone with HP support with no resolution - in fact, after all this time, I was told "this Department does not support this printer!.» Any ideas on a solution here? Thank you!

  PS - I initially posted on a different picture, I hope someone here can help.

  For this device, the driver of windows 8 will not release until the end of January. Please bookmark this site and refer to it for more information up-to-date.

  Can I 8 supported for LaserJet printers

  In the meantime, drivers windows 7 should work for this device.

  Color Laserjet 1600

• Will print on White-error with color paper: too small

  I'm trying to print labels for gifts on paper colored with Photosmart 7960.  Print preview shows will fit and prints ok on white paper. With the help of color of the same weight and thicker paper - printer error 'too little paper.

  HI - you could try affecting the Type of ordinary paper rather than automatic.  Sometimes the color can shake the paper sensors.  In some app you are in, click on file, print and then there should be a button preferences or Options, click on that and you should be able to find the paper Type option.

  Hope that helps.

• Change an icon images to grayscale or color levels when it is disabled/enabled

  I have a button in my application that is configured to be active when a tilelist (profile1EntertainmentAddLinksTilelist) has at least 1 point in it. I have a text but also a color icon in this button.

  I currently have 2 functions of code 'convertToGrayscale()' which converts components into levels of gray and 'convertToColor()' which converts the components to the color.

  What I want is so that when it is clicked the convertToColor apply to it even when disabled convertToGrayscale would apply to it.

  I know there is a 'enabled' property in the buttons, but is not to be a fundamental property of "disabled".

  Another problem is, within my button, I already have an enabled property so that when the tilelist component with a component, only then is enabled. Is it possible to add the convertToColor function in the property enabled so that it is activated when the tilelist component has more than 1 point in it that the button is enabled AND it converts the color? This is the bit I'm struggling with that.

  Enabled = "{profile1EntertainmentAddLinksTilelist.SelectedItem}" "

  This solution uses the change and valueCommit event.

  If this post has answered your question or helped, please mark it as such.

  
  http://www.Adobe.com/2006/mxml '.
  Initialize = "initData (); » >
   
      Import mx.collections. *;
       
  [Bindable] private var buttonEnabled:Boolean = false;

  private var listArray:Array =]
  {label: "item0"}, {label: "item1"},
  {label: "item2"}, {label: "item3"}
  ];

  [Bindable] public var TileListdp:ArrayCollection;
       
  private void initData (): void {}
  TileListdp = new ArrayCollection (listArray);
  }
       
  private function changeHandler (): void {}
  buttonEnabled = tl.selectedIndex > = 0? true: false;
  }
  ]]>
   
   
   
   
  

• How to print the image in grayscale in the rich black?

  How to print the image in grayscale as PDF as black process only instead of CMYK?  I'm on FM10

  Ed,

  What file format you save the image in? It is important, as indicated by error. If you left it as a PSD, then FM performs a conversion to RGB. A TIFF or EPS file properly remains blank (i.e. on the plate of K). Other formats, such as PNG to grayscale are actually indexed color and solve RGB when FM creates the PDF file in the presence of plates of Spot and where the components are mapped to the CMY plates also.

  Here is a sample generated using SaveAsPDF with the CMYK option with the same 'gray levels' file saved in the format PNG, TIF and EPS in Photoshop (Note how the PNG isn't all there, on the plate K):

  

• The color in printed images is not match the colors on the screen

  I've recently updated to an iMac, retina 5K and the colors in the printed images do not match the colors of the image on the screen. I use CS6 and the screenshot below shows that, in the window of the print settings CS6 image does not match the image of origin either, the original image on the left.  I've updated all print drivers, and the images are also too green/faded when I print them, or download them on Animoto or Mpixpro.  We tried a Spyder calibration system, and that did not help.  For now, I have to make a folder separate with "twisted" images that have increased the saturation and Communists to give them a normal appearance.  Does anyone else have this problem?

  

  Unless you have a current color profile for the display you are using and you have calibrated the printer for the specific of ink and paper that you are using, its not surprising there are differences. Without a color managed workflow screen and software have no information on what the printer can produce.

  The range Spyder products are not up to the task.

  The normal options for managing your color workflow are:

  1. using the X-Rite i1 photo system,

  2. purchase of a custom profile for your type of printer, paper and ink, done by a specialist in color management

  3 - Send your files to a professional lab that is capable of producing quality work.

• Convert an image to grayscale 10-bit color

  Hi all

  I am a programmer of experience of labview 8 years, but new to the procession of the image or NOR-Vision. And now, I came to a problem with the conversion of the image.

  I have an image acquisition card that acquires 1 k * 1 k 10-bit grayscale image, I saved the image acquired in *.raw (binary) format, and now I have to convert these images to bmp (jpeg, png, or diff) format. When I try to use the VI "Imaq save 2", I got an error saying something like "unsupported image type. After searching this forum, it seems that if I have to use an image of color type save as bmp format, but to receive my 10-bit RAW files, I first need to create an image in grayscale U16. So, how can I solve this problem?

  Thanks for your suggestions!

  My guess: you're referring to the 'writing IMAQ 2.VI of the file' as I do not know everything "IMAQ save...". Screw.

  The 'writing IMAQ 2.VI of the file' does not support writing 16-bit BMP.  You can take this information among image types supported this VI, see here.  Look at the pictures above, the designation of VI: 'IMAQ writing file BMP 2' says that he accepts "U8" and "RGB32 image types.

  Proposal: Write a PNG image.

• working with color images

  Hello

  I am stuck on this program, I can't seem to understand.

  can someone guide me in the right direction please.

  I did this program, and it is properly take a reference image and other images rotated and attract crosshair while the images are shot.

  It works.

  but when I put a COLOR image instead of the image in grayscale. It does not work. It gives me the error.

  can someone help me with this please

  I have to build the vision of this script Wizard

  

  It seems to work with grayscale images and not the COLOR PHOTOS.

  What can I do to make this work?

  I need to work with images like this and I have to call reticle around the BLACK POINT on the left corner.

  

  I also have a sample VI created vision Assistant?

  In the wizard of vision follow this

  

  

  This, if your original image is a RGB one.

• Printing on Photo paper with black ink cartridge - J6480 - grayscale does not work

  With:, Mac OS 10.6.6 more latest software HP Print/Scan/utilities:

  The color radio button to use the black cartridge is grayed out if you choose to print in grayscale. If the color cartridge is empty, you cannot print in grayscale on photo paper. It allows you to print in grayscale on plain paper.

  In other words, that it is making me use the color cartridge for printing in grayscale on photo paper. It doesn't look good for me.

  Well Yes, that's right.  The ink in the black cartridge is an ink pigment (about particles of carbon suspended in the solution) and cannot be absorbed by the photo paper.  The ink in the color cartridge is dye based (like dye food) and is absorbed by the coating on photo paper.  That is why all the printing with black cartridge is denied when using photo paper.

  Pigmented ink is used in the black cartridge to produce the beautiful crisp text on plain paper.  There are HP printers with cartridges 'Photo Black' which are ink to dye black which can be used on photo paper.  These printers also have a black text in another cartridge which is a pigmented ink.

• HP Deskjet F2280 all-in-one: color print images saved offline problems.

  When I print an image that I downloaded from the internet, the colors do not conform to the original (a lot of blue in there).  I printed directly from the printer itself, and that's fine.  I changed the color cartridge, did the cleaning, checked, I had download the correct software and tried to open the image in paint, but still not good.  I changed the setting to fast eco who, although not the bright, the image itself so more true to color.  Can anyone help please.

  Hi @anniegwenand welcome to the Forums of HP.

  I see that when you print images that you save from the internet, the colors are not what you expect and the printed output is more blue than the original. Because when you print directly form the printer (copy) the output is as expected, I suspect that the issue has to do with the print settings, a driver or a program that you are printing from.

  I suggest to use the following steps to remove the printer from the device and printers and the driver from the properties of the server. This will help isolate the driver.

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 -select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Once the driver is then deleted, open start > all programs > HP folder > folder printer > HP Setup and software (or the icon of the printer). The installation screen and the software opens and you can click on connect a new printer.

  If the fingerprints still don't match what you see on the screen, try to print in a different program. For example, instead of save an internet image, print the image directly from the browser. In bold, what brings the cause to wonder, when you save, you are printing on photo paper? Have you compared the print quality between an image printed on ordinary paper and a image on photo paper? If you use photo paper, and that's the only time where the output is more blue than expected, please try different photo paper. I know this sounds unlikely, but I seen the book be causing more time than you probably imagine.

  Let me know the results of your efforts at this point, and we will proceed if other troubleshooting is necessary. If something I suggested the problem, please click Accept button Solution below to report your post as solved.

  Thanks, I look forward to hearing back on your part.

• I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  The Deskjet F4288 joined the printheads on the ink supply.  These are replaced at each change of cartrdige so there is no concern about printing empty color or black cartridges.

  You should be able to print in ink entry mode "backup" by removing color (or black, but not both) cartridges.  There will probably be a warning message about ink backup mode but you should be able to print and the printer will work regardless of the cartridge is available.  In handwritten backup with the only color black cartrdige mode areas will print in shades of gray.  If print ink backup mode only the installed color cartridge then black will be printed by mixing colors.

  See page 75 of the manual here, that says:

  Use the entry ink-backup mode
  Use ink-backup mode to operate the HP all-in-one with only one cartridge. The
  ink-backup mode begins when an ink cartridge is removed from the print cartridge
  transport. During the ink-backup mode, the product can only printing from the computer.
  You cannot start a print job from the control (such as copying or scanning a Panel
  original).

  NOTE: When the HP all-in-one device works in ink-backup mode, a message is
  displayed on the screen. If the message appears and two print cartridges are installed
  in the product, check that the piece of tape plastic protection has been removed
  each print cartridge. When the plastic strip covering the contacts of the print cartridge, the product
  cannot detect the cartridge is installed.

• Windows 8.1 in Adobe Illustrator, I tried to copy my design & tried to paste it, but after sticking the image (file), now the color looks different, drive and lighter. So, kindly inform how to paste the file with 100% same resolution / color / appeara

  Windows 8.1 in Adobe Illustrator, I tried to copy my design & tried to paste it, but after sticking the image (file), now the color looks different, drive and lighter. So, kindly inform how to paste the file with 100% same resolution / color / appearance. Thank you.

  Hi GANESHKUMARAPILLAI CHRYSTELLE,.

  Here is a link for color management workflows in Illustrator.

  It is best to place the image instead of paste into Illustrator. When you paste the images they are in RGB color format. Make sure your document is a RGB file

  Click on these links for more information.

  Understand the workflow of the CC of individual course Illustrator color management: Advanced

  Creative Suite * keeping colors consistent

  Implement the print color management workflow. Illustrator, InDesign, Photoshop

  Concerning

  Scott

• Office Jet 6600: How to print black with color ink run out?

  How can I print black with color ink are empty? (I have gone to properties... black and white only... and allow black ink only a few times, but I get the options for onlinr purchases, cancel printing or help.)

  When I click on it help States I can print with the depleted cartridges, but it doesn't tell me how. Can someone please?

  Hello

  For your printer, it is only possible to print only in black when the other cartridges are exhausted.

  If you want to know more about it please check the document below

  http://support.HP.com/us-en/product/HP-OfficeJet-6600-e-all-in-one-printer---H711a/H711g/4322968/model/4323587/document/c04331666

  Thank you

  I am an employee of HP, these messages are consistent with my knowledge and HP is not responsible.
  By clicking on the star of congratulations in the post helped you to say thanks.
  Please indicate the position that solved your problem as accepted Solution

  I work for HP

• Color LaserJet CP1518ni: No option to print in color / grayscale HP Color LaserJet CP1518ni

  My computer recently automatically upgraded to Windows 10 day.  I can't find anywhere is more where I can spend my color to grayscale printer or vice versa.  It only prints B & w now.  I downloaded the recommended printer driver (PCL 6), firmware, etc.  I spent hours trying to find a way print in color!  There is no option in the properties of the printer, printer properties or preferences.  Any help would be greatly appreciated because it's completely frustrating.  This was not a problem in Windows 7 for me.

  Hello @raydunc

  Try this

  Go to devices and printers and right click on printer properties then go to device settings and go almost all the way down to the type of device a color change and save the changes then go in the printer preferences and in the color tab, make sure that in its unaudited grayscale printing option