Print is so big, it only prints a third of a page and fills the whole page

Similar Questions

• I filled my printer with an hp1200 cartridgeworld cartridge and now the printer always says "check printer cartridge? any ideas help please

  I filled my printer with an hp1200 cartridgeworld cartridge and now the printer always says "check printer cartridge? any ideas help please, PS is not the first time I used these cartridges, but this is the first time I had no problem

  Hello

  Follow these steps and check if that helps:

  Method 1:
  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  Try to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  It will be useful.

• FF31: When I only have a tab open, even empty and close the tab window closes.

  FF31: When I only have a tab open, even empty and close the tab window closes.

  Type of topic: config in the address bar and press enter.
  Accept the warning.

  browser.tabs.closeWindowWithLastTab

  Double click to switch to false and then restart Firefox.

  Now, if you close the last tab of that window (or Firefox) does not close, but a new tab will be there.

• How to print only the text selected on a Web page and not the whole page?

  After you have selected a segment of a web page for printing, I go to the icon for printing and that clears the selection, leaving only the whole page as the selection to print.

  "The feature to print just selected text in a Web page doesn't seem to be a function of Firefox."

  If you use the toolbar print button, from the preview window before printing 29 Firefox open rather than the "Printing dialog window" as with the previous versions. using the button print in the upper left corner of the preview, takes you to the "print dialog window. "selected text" does not persist through the preview window; no way to print a selection of text using the toolbar print button. (a bug report has been filed on this change - regression.)

  As cor - el mentioned if you start printing via the keyboard, instead of using the button print, you should be able to print a "selection" of the text.
  WFM - works for me

• the confirmation to print on a single fax number and not the entire

  Is there a way to set the fax to print a confirmation on selected numbers page and not all? Thank you

  Hi lynnlevien,

  Because of the limitations of the interpretation of the signal, there is no way to print confirmation reposts only from specific numbers.  The feature may be turning on for all faxes to be disabled.

  Please let me know if you have any questions.

• Is it possible to sync only bookmarks in one device, for example and all the other stuff between other devices?

  Hello.

  I have 3 devices. 2 of them are at work, so I don't want to sync items such as extensions (xnotifier, for example, is to synchronize my CPA), passwords for my PC at home with these two devices. But I want to synchronize my bookmarks and other things. Is it possible to separate between different devices sync settings?

  Thank you.

  You may need to use two separate sync accounts, if this is not possible with a single account.
  As you cannot use both accounts at the same time on a device, you will need to disconnect the computer which is the main device and (temporarily) connect to another account only synchronize to the other account to sync bookmarks.

• Why the Web page after only the third Center of the screen and not the whole width?

  Using firefox on a vaio z 13.0.1. All the websites I try to access to appear narrow, occupying only the third Center of the screen. Not such a problem with IE.

  Thanks to everyone for the suggestion. Firefox solution for what is essentially a Reso and problem of Zoom is unnecessarily complicated. I switch to Chrome.

• How can you save only the image and not the whole page?

  We decided to use a tool to manage all media (mediastore), including Adobe illustrator files. Our mediastore display objects as thumbnails (small images) and is able to export in different formats, such as jpg images.

  The problem we have is we see the page through this mediastore, not only the image that we have learned with Amnesty International. So on the tile sometimes we see nothing because the image is small on the page (we see a small black spot on an empty table) and when we send the image (export), receivers had to crop the image to get only the photo...

  Y at - it HAVE any option to save in a format, but with photo only?

  We want to keep th HAVE format, because we want to be able to edit it with AI if we need to change.

  Example of tile:

  Is this too much problems to scale the work plan to adapt to the work? When you're in "Modify the work plan" double-click on a group given image automatically dimensionnera the current work plan to adapt to the work.

• computer falls asleep and only wake him up is to disconnect and remove the battery and it will come back, and then reinsert the battery it's a dell

  My computer is asleep and won't wake up. If I unplug the unit and remove the battery, it will be ok. Then

  I can reinstall the battery. It's a dell intel Insider core 13

  Hi Jim,.

   

  This problem may occur because of low battery or power problems. Please follow the instructions to solve the problem:
   
  Refer to the suggestion of Leo Huang dated Tuesday, September 14, 2010 09:01
   
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/0866de60-A16B-41c4-8a6e-b56c848478f3
   
  Let us know the result. If the problem is still not resolved, we will be happy to help you further.

• How can I make my mobile site fill the whole browser. I have a big empty space to the right.

  When I write my site there is a large empty space on the right. How to make my page fill the entire screen?

  This happens usually when you have one or more items or extending outside the area of the layout or phone page breakpoint. Move or resize the elements to the page area or a breakpoint can solve the problem.

  If will be able to help better if you could share the URL of the site in question and also let us know if you create a breakpoint for your phone or a separate provision of the phone?

  Kind regards

  Vivek

• HP Office Jet Pro 8720: Problem set up and launch the new printer & ink cartridge installation

  Two questions:
  First... it takes a LONG time for the computer to open itself.
  Then, when he did initiate... I opened the section of ink cartridge
  to install the ink & transport of ink would not come to the Center.
  SO... I stopped the printer to start again... and now, the
  screen has a spinning wheel indicating "cartridges controls."
  It lasts for more than half an hour.
  HELP... This is a new printer & I can't open.
  Thank you kindly.

  Hi @paulallah,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you have a printer of HP all-in-one OfficeJet Pro 8720 which took a long time to initialize and is now stuck in a mode 'check' cartridges after the reboot it because transport would not move to the Center. I would like to help with that.

  I would start by doing a Reset of the power on the printer.

  

  If that fails to solve the problem, you might want to speak with HP Technical Support as there may be a hardware problem.

  You mentioned that you are using a Mac running OS X 10.5 Leopard or more. The HP all-in-one OfficeJet Pro 8720 printer is only compatible with Mac OS X 10.7 Lion or later.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• My Macbook Pro shows off my HP printer online after the first use (print or digital). I have to turn the printer off and then on again to print or scan for even once.

  My Macbook Pro running El Capitan 10.11.6 shows my printer HP (envy 110) as offline after a print or scan session. I have to restart the printer each time I use it, and then the Mac it falls again after printing or scanning session.

  I loaded the latest drivers on the Apple site without success. The two are on a wireless home network.

  Help!

  OS X El Capitan: print troubleshooting

• 6600 printer all-in-one is offline and wont print wireless from laptop

  My 6600 not connected wireless all in one printer shows offline will not print from my computer laptop (Windows 8) worked all the way until last week, that he just decided to stop printing

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• Settings for Epson printer does not not in LR and EP 12, blocks programs when I click.

  4.4 LR and EP 12, after I put all my info of color management in Control Panel printing of the program for the Epson printer and the correct book, I go to Page layout, select the paper size and printer, then the settings of the printer, select the printer, and then try to select the paper source, nothing happens and then attempt to select paper, and then planting programs.

  My problem is now solved.  I got with the help of Epson.  We had to remove the printer from printers/scanners in the Preferences of the iMac HD section after disconnecting the usb cable. Then, we went to the utility disk in the Applications folder and performed a repair disk.  After that we have connected the printer, rebooted, open ss12/LR4.4 and, voila, the source type and media paper now contained the appropriate information.  Something was wrong with my system, one of these mysteries.

• My laptop always tells me that I am user of 'limited' and I need to log in as an administrator. I am the only user of this computer at home, and I can't find out how this action.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you had only one user account, it originally was an administrator, and he has now suddenly become Standard see methods below. After return you to the system scan for malware because these things happen not magically by themselves. You will need to log on to the built-in Administrator account and make your changes. See the end of this post for the recommended user configuration.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  1 boot without failure. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Vista. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.

  2 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can do a repair file Vista bootable DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need the third-party burning software such as Nero, Roxio or the free ImgBurn (www.imgburn.com ) to burn the .iso image image file, not in the form of data.

  Now remove the rescue CD/DVD, you have done, reboot Windows and log on to the built-in Administrator account, you enabled.

  After getting things sorted, login to a different administrative account (see recommendations below) and disable the administrator built-in again for security reasons.

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!