Print quality of the placed PSD files

Similar Questions

• Control of printing quality of the touchscreen on the MG6320

  Hello, I have a two part question. I am interested in the control of printing quality of the touch screen.

  1. can I set print quality (i.e. - choose Project/fast mode) the touch screen?

  2, if I can and set it there, my choice will apply to all future print jobs until I have change the new setting, or just apply to a print job in the queue in time, etc?

  I hope that my questions are clear. Thanks a lot for your help.

  Hi Ralp51,

  The quality of printing of documents printed from your computer is controlled be the printer driver on the computer.  The quality can be set from the PIXMA MG6320 himself.

• HP C410a Photosmart Premium: bad printing quality on the picture

  Printer HP Photosmart Premium C410a, just replaced all THE cartridges (genuine HP) - he always tells me cyan and magenta are weak, but the test page printed fine and I cleaned the print heads. When I print a picture (of the program Apple Photos) the ink begins to blurr and run. It is a new problem, all worked well.

  Hello and welcome to the community of HP @BevA1,

  I understand that you encounter some problems print quality when you print pictures of your HP Photosmart Premium C410a. I will do my best to help.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

  Problems with print quality setting for the HP Photosmart Premium Fax all-in-One Printer Series (C410a C410b, C410c, C410d, C410e)

  If this help will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• Bad print quality with the new cartridge

  I replaced the cartridge on my HP Photosmart c4680 printer a few weeks ago and the print quality looks as if it is low on ink. I followed the instructions on alignment after installation and made sure that I installed the new cartridge. There is no prompt that the ink is low. The other weird thing is sometimes the printer does not start when I turn it on. The screen reads HP and he begins to beep every 10-15 seconds or more. This problem occurs intermittently, but began after the installation of the new cartridge. Would appreciate any help to solve these problems.

  (1) pull the cartridge out and reinsert it, if there is a latch to ensure she fully locking up.

  (2) your HP software for the printer should include several utilities, one such utility is to print a page of 'Test '. Run that usually it will clean the print head.

  http://WWW8.HP.com/h20621/video-gallery/us/en/customer-care/printers-and-all-in-ones/print-a-diagnostic-page/1245169387001/printing-a-test-page---HP-Photosmart-c4795-all-in-one-printer/video/

  Now try printing one of your documents.

  J W Stuart: http://www.pagestart.com

• Help! PSE14 now crashes when trying to open the complex PSD file

  Today, whenever I try to load a quite complicated PSD file, PSE14 crashes and I have to end task it. Here are the files that I have worked with. They charge fine until today.

  I rebooted, but the problem persists.

  I had this problem when the assessment initially PSE, and mysteriously, it resolved itself.

  There was an upgrade of Windows 10 last night. Maybe it was the question? I need to be able to access these files.

  Thank you!

  Al

  See this thread:

  Eight years of text Tool Crash and no Solution? Really?

• How to fix the damage psd file?

  Hello!

  My computer crashed today while photoshop CS5.1 economy/write in a psd file. When I started my computer to the top and tried to open it again, it displays only 1 layer shown as a corrupt image (as shown - red in the Image below). When I click on the file in the window 'Open' (The Gray Image below), the psd is displayed correctly in the preview window, but does not display correctly when opened. Help, please...

  Open it, and then under file > file Info, make sure it is not a code there that shouldn't be there, then he re-record as .psd or .tif

  Do not click on strange links that may be present (although sometimes there links to copyright in the field of copyright which are legitimate identifiers.)

  Sometimes, when I get questions like this, and there is nothing in the actual file information, this may mean that there is something in the code of the actual image. Then I opened in GraphicConverter and save as .tif or .psd. It clears sometimes upwards.

  A .jpg file is not a page layout format. Quark hate them. Never had any problems in Indesign with them but they are compressed.

  Also read comments on the sites below:

  df87/how-do-i-recover-PSD-files?Forum=itprovistadeploymenthttp:// https://social.technet.Microsoft.com/forums/Windows/en-US/b826785a-3b69-4e63-ac62-fabec7e3

  http://www.filerepairforum.com/Forum/Adobe/Adobe-AA/photoshophttp ://

• Does anyone know of a Bonus print online printing service that will accept psd files in raw format?

  Does anyone know of an online photo printing service as Bonus print this accepps psd files in raw format?

  Thanks a lot for your kind reply.

• Will Photoshop CS6 open the CS5 .psd files

  I'm going to CS6 and I want to just make sure that all of my current .psd files will work with it.

  Altogether.  It is the opposite where the problems can occur

• to change the color of the logo PSD file

  I have a PSD file that has a logo in white on black background.  I don't know how to change the black background to another color but I don't know how to change the logo in white with another color and keep the existing fade effect.  The outer edges of the melted white logo in the background black.

  If I had to change the black background at bottom green (#808A 53), then I would like to know how the melted down logo white then green.

  Finally, I would make the white and red logo (#7d110c) that fades into a green background (#808A 53) but I do not know how, because I am a novice with Photoshop.

  The PSD file that I mentioned is hosted here http://www.indiana.edu/~iutreas/img/blockiu.psd.

  Help on technique, or I need to use instructions would be greatly appreciated because it had blocked me for awhile.

  Johnny boy says:

  ... I don't know how to change the logo in white with another color and keep the existing fade effect...

  May I recommend not having a baby before the more complex direction. What is a layer mask?

  

  1. Select the logo layer in the layers panel.
  2. Click the "Lock transparent pixels" (circled in red).
  3. Paint your color with a brush or a bucket.

  A perfect way to advance level "novice" is to get a book on Photoshop to your library. You can learn about layer masks here.

• Trying to fix the broken PSD files

  Hello Photoshop experts.

  I have a group of Photoshop CS PSD multilayer files that have been saved on a Mac in 2004 and then burned on DVD... most of them very well now opens on this PC with Windows 7 in Photoshop and GIMP, IrfanView.

  But some of these PSD files but only display a message on a white United, that says:

  ""This layered Photoshop file was not saved with a composite image ' in four languages. "

  
  
  Unfortunately, I'm in a place where I can't go back to the Mac computer and the Firewire drive that these files have been saved to the original to and I am currently working on this PC with Windows 7 and Photoshop, GIMP, IrfanView, but these files does not open.
  
  I wonder if anyone knows a trick, some internal code editing, or any application that could get these files to open and view at least a flat version of what they contain, otherwise all of the layers that have been registered originally.
  
  Thanks for any help,
  
  NuMetro

  I was able to open the first two files that you sent with success, just open them in Photoshop CS5 64-bit.  Very nice images.

  I have them recorded with maximize compatibility and am now downloading. I'll you E-mail back the link in a few minutes.

  -Christmas

• I had a Photoshop crash, where can I find the last PSD file?

  I don't know where are my temporary files. Can someone help me please!

  [Left the forum Cloud/Installer generic for program specific forum... MOD]

  First Photoshop isn't a file editor, he worked on the Document in memory data structures.  If your work on a picture unless continuously, you save and overwrite the source image file, nothing has changed in your image file.

  Photoshop has an AutoRecover feature in newer versions of Photoshop.  Lights up when you change a recovery file is written to a time interval programmed while you are editing images of images.  If Photoshop crash when you start Photoshop recovery should be automatic. You should document available as it was the last time it was auto-saved.  You will lose Photoshop history States and the steps you did after the auto-save and the time that Photoshop crashed.

  The document recover will be called *. PSB. PSB files are native Photoshop big image file format.

• poor print quality, clean the heads, all ink levels ok,

  printing lines, horizontal, poor quality, some missed lines quality fakes. Cleaned heads, nozzle, all ink levels fine

  Hello Stephenagar,

  What operating system you run on your computer? (Windows 7, Vista or XP?)
  
  
  What is the printer brand and model? (HP, Canon, Brother, etc..)
  
  
  I suggest that you try runing the Microsoft FixIt tool is in the following article:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Printer is not printing, but opening the window "save file as".

  These days, my printer will not print when prompted. Instead, he opens the "save file in" when I click on print/OK.  What the hell happens and how to restore my printer?  I checked the drivers and they are fine and up to date.  It prints of OpenOffice, but not my account e-mail or all websites.  Any help will be greatly appreciated, as soon as possible.  Thank you very much.

  Thank you Mike for your response and suggestions.  I have found the solution myself (my mistake, of course) and it works once more.

• Can not install the printer due to the error this file contained a virus

  I am running Windows Vista 64-bit and trying to install a HP Photosmart 3210xi printer.  I get an error "AIO_CDB_Full_Network_enu_NB_exe" contained a virus and was deleted.  Under Security Essentials, there is no virus and I need a way to solve this problem.  Not an advanced computer user, so I need some basic answers I can fix myself.  Thank you.

  You are installing from an installation CD?

  There is a download of HP support

  Downloads of software & driver - all-in-one printer, HP Photosmart 3210xi
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=447851#n195

  The file download is simillar to the error you receive. You need to download only on manufacturer support site.

  Or you can try Vista for HP Photosmart 3200 series driver:

  Go to control panel of configuration, printers, double-click Add printer, choose a local or network printer click Next, choose a printer port click Next in the Add Printer window, under manufacturer select HP, under printers down scroll and select HP Photosmart 3200 series. Continue with the installation and follow the instructions.

• The different poses in the same psd file store

  Hi, I imported a character of fuse for Photoshop - now my question is: how to back up different poses for the same character?

  I watched layers, but it seems that this would require duplicating all active 3D - which means that I would not be able to update the character and then export it in different poses, I have set myself.

  After trying, it seems not possible to update a fuse character and these changes appear in Photoshop. I get another file with the same name in the library. Apparently the fuse does not recognize when there are two files with the same name and it seems not to be a dynamic link between the fuse and Photoshop. Perhaps there is a function in Ps similar to the function of sequences to replace or recharge in After Effects, but I don't the have not found.