"print service spooler does not work" with newly installed printer

Similar Questions

• H8 - 1360t: restarts power - does not work with the installed memory

  HP clubhouse, i7, Windows 7, 3 x 4 GB, discreet grahics

  The computer turns on, then immediately restarts.

  No beeps.   Monitor says 'no signal '.

  I tried

  -different (new) hard drive - no change

  -current hard disk drive shows no errors; all the data is there

  -installed the new power supply - no change

  -removed the discrete video card; used another card discrete video - no change

  -cannot test on-board DVI video because it does not have the 4 holes next to the long bar. all my vga DVI connectors have the long bar with the four holes around it (sorry I don't know the different DVI connectors)

  What works:

  When I remove the memory, it will beep seeing that no memory is installed; AND the computer continues to operate (it is not restart).

  -J' tried memory (3 of them every 4 GB) as single and pairs between 2 blue 2 black slots grids.   No change

  -J' tried another key to 2 GB - no change

  Suggestions?

  Thank you

  Darryl

  Problem was the motherboard.   Replaced by the exact type as to doesn't interfere is not with the software installed.

  Everything plugged immediately when starting on the new motherboard.   The user has a problem with software that had to be put back.

  So-

  1. If the computer won't power more than 5 seconds

  2. change the components with known good components does not change the restart without end to power on

  It is the motherboard.

  Thanks for the help.

  Darryl

• Windows can't open add printer. The local spooler service sprint does not work. Please restart the spooler or restart the machine.

  Hello world

  I have back Windows 10 to Windows 7 Home Premium as suggested previously and it worked fine. Then knit as well as the sound function keys, but I now have a problem with the printer. I have a Toshiba Satellite.

  I am trying to print and get the message "...". You must install a printer.

  I reinstalled my Epson WF-2630, but when I try to add a printer in devices and printers, I receive the message "Windows can't open add printer." The local spooler service sprint does not work. Please restart the spooler or restart the machine.

  Can someone help, please?

  Thank you very much

  WestAusShortie

  Hello West,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur if the print spooler service is not running.

  Please refer to the suggestions of John Rubdy replied on April 29, 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-cant-open-add-printer-the-local-print/41f98aad-3a9c-47A6-978b-7c20e3ce9e0b

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Printer spooler does not work for a single user on the network printer

  original title: very different printer problem

  I have a HP deskjet printer shared from a PC on the network.
  I was informed of a single person could not access error poped by saying "printer spooler does not work.
  I went to the services and made sure it was infact running and rebooted to be sure also restarted the RPC services as it is addictive
  Still, the user cannot print to the printer. I took the computer that has been seen issues and hung where fixed my PC and I am able to connect and print!

  If I move my computer witch would allow me to print before there where his computer is my computer prompt same error

  My idea is - what some are how a network issue, but the user can still access drives network, internet and other printers on the network

  Just not this printer

  The computer on the share is is a windows xp sp2 workstation

  The computer with the issue is any system I plug its cable Ethernet (XP anyway) I have not tried with a windows machine 7.

  My hypothesis is a bad Ethernet cable? I'm quite lost with this question at this stage.

  My next step is to hang the printer until a print area and assign an IP address and finish with the share.

  (Still not sure if it would help or not)

  Any advice is welcome thanks

  It turned out to be a bad switch. I don't understand why it did not work. All the computers had no problems other than the present even that if I swapped the ports it has made a difference.

  Hung new switch and all computers works fine now.

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...

• Cannot install WIndows XP SP3 - wireless adapter does not work with any package of service beyond 2.0

  original title: wireless adapter does not work with any package of service beyond 2.0

  I have an AirLiink 101 wireless adapter.  Anyone know how to change the service pack 3.0 for me to update my Windows XP?   Can not install 3.1 without losing wireless connection.

  Thanks for any help.

  If you are on a wireless connection, try to switch to a wired connection and try the download with Internet Explorer.

  UTC/GMT is 06:49 on Wednesday, April 11, 2012

• Printer Hp5510 crashed. Software removal - tried reinstalling. Cannot install printer Message "print spooler does not work - what's up."

  Hi all

  Need help

  Hp5510 locked

  I works fine when connected to my laptop - but-not when it is connected to Compaq Presario desktop mu

  Software removal - tried reinstalling. Failed to install.  printer Message "print spooler does not work - what's up."

  ↑ hanks

  Scott

  Consult HP printer experts found in the HP printer Forum.

• Logitech USB microphone does not work with Vista, Service Pack 2, PC. ____

  My Logitech USB Desktop Microphone does not work with my Vista, Service Pack 2, the PC.  He asks the driver, but Logitech says it's in the Vista software, here is the largest part of the error message:

  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site.

  Signature of the problem: Problem event name: PnPDriverNotFound Architecture: x 64

  This seems to be a problem that's happened, but after searching for hours, I can't find a quick solution.  Any help?

  Hello

  Please do as I suggested in the answer above is probably the solution.

  You can also do this after the above.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I can't print. It says local print spooler does not work, restart the printer or machine.

  I use windows7, I can't print. It says local print spooler does not work, restart the printer or machine. I can not install, or add the printer currently installed in my computer. Help, please.

  Original title: printer

  Hello

  The print spooler is the mechanism that will interface between your application and the printer and coils (sends) the print job to the printer. It should start automatically when you start your machine. So, restart your computer and try again. I suspect that the real problem is to find why the print spooler has stopped in the first place.

  After trying again, see what happens and if your print spooler stops again, the real work will begin.

  Kind regards

  BearPup

• Monitor all-in-one Epson Stylus CX3900 printer ink does not work with win 7

  Ink monitor does not work with win 7. It is connected to a pc win 7 and the ink monitor does not work on the two win xp computers on the same network.

  There are Windows 7 drivers here...

  http://tech.Epson.com.au/downloads/category.asp?sCategory=Multi_Functional&ID=styluscx3900&SelOS=Y

  Have you tried?

  Generally, functions such as ink levels work only on the host with the full support of the package installed and is not available for all computers that are connected to the host of the printer.

• My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  Visit the HP website and look.

• my hp printer does not work with my Mac, but because our hp computer. Why? CC = en

  my printer does not work with my Mac, but because our hp computer

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Norton Toolbar does not work with Firefox 17, provided Comcast Norton Security Suite, Win 7.

  I have Norton Security Suite provided by Comcast. Norton Toolbar does not work with Firefox 17.0.1 on my Win 7 machine. I lived all the questions on this topic and did all the steps and when I click on "Add-ons", he always says that the toolbar is not compatible. It works with IE, but I prefer to use Firefox.

  I had the same problem in the past. If you call customer Norton service toll-free they have always helped me start (without charges) when I have updated to a new version of Firefox - seems to happen every time even if I run the updates regularly. Hope that this phone help-Norton support is always very friendly and helpful-just Google their 800 number.

• TV tuner does not work with SP1 Vista32 on Qosmio G30

  Hello

  My TV card does not work with Vista32 SP1. Material contol said all workers, but the Media Center Receiver service crashes immediately after departure.

  Did someone knows a solution?

  Your Ruediger

  Hello Ruediger

  I don't know if this will help, but try to remove and install the tuner of TV Toshiba - 2.0.0.61129 again. You can find it on the Toshiba support page.

• DeskJet 712c does not work with Win 7

  I recently switched to a new win 7 Home Premium SP1 (64) my old XP computer which worked well with my printer.  The printer does not work with the new OS and the computer.  Even if the computer indicates that the device is functioning normally, the printer will not accept print orders.  Not even the printer print test.  There is no error reports but the system behaves as if the usb is not connected, even though it is.   There were no changes in connectivity before or after installing new software (or trying) trying to get the new computer set up.

  I just found it and tried the wizard of the printer which also implies that the usb is not connected even though it is.

  The compatibility options have done nothing to help.

  Tara,.

  EUREKA!  At the risk of party too early, it seems that I am able to print with my new computer (HP).  Fixed after almost endless hours trying to get my printer to work despite many internet messages saying it could not be done and other giving solutions that didn't work.

  Why o ' why the solution apparently a hidden secret and why the tools did not work?

  In any case, thank you very much.  With all the problems I'm having to migrate to Windows 7, it's a very important achievement.  Thank you, thank you.

  Chuck