print spooler is manual and off the re-boot

Similar Questions

• Printer not print indicating the print spooler is stopped and does not restart

  Original title: printer does not print

  The print spooler is stopped and does not restart. I have a laptop with Windows 7 and the printer is a HP Officejet 8600 (network). My wife has the same laptop model and has no problem with printing. Any help you can give would be welcome.

  David Torres

  Hi David,

  Thanks for posting your question in the Microsoft Community.

  I understand that this printer not print indicating the print spooler is stopped and does not restart. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  . Have you made any recent hardware or software changes to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Step 1:

  Run the Microsoft Fix It from the link below.

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

  Step 2:

  Follow the steps in the link below.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  You need to check if the Printer Spooler service is started from services.msc.

  a. click Start, click run, type services.msc.
  b. double-click the print spooler and verify that the status is set as Automatic or Manual.

  c. right-click on print spooler and click restart.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

  I followed method 2 above. When I Rt click Spooler printer restart remained gray when I click on START, I get the message "Windows failed to start the service on local computer print spooler.   ERROR 1053 the service did not demand launch or timely control.
  What can I please?

• Printer Spooler not started or has the error?

  When you run in the installation or printing issues, and it gives you a message on your "Printer Spooler", it is usually in the service of your window.

  Here are some measures that you can get (again).

  1. click on Start Menu
  2 right click computer
  3. choose MANAGE
  4. click on Services and Applications
  5. choose the Services
  6 scroll down until you see PRINT SPOOLER, if it is there, click on it and run it. (In addition, it should be NOT automatic manual)

  If the "Printer Spooler" isn't on the list, you will need to contact your WINDOWS because this should be already on your computer and START.

  Thanks for reading, hope this helps.

• Satellite R840 - 12 c: cannot manually turn off the WiFi function

  I recently bought a brand new Toshiba Satellite R840 - 12 c Notebook.
  The Wifi light is still "on" and the function key does not work, in other words cannot manually turn off the WiFi feature.

  Although the WiFi feature is still "on" I can't connect to wireless modem. "

  When I go to Device Manager I find conflicts in "other devices" for

  1. network controller
  2 PCI Simple Communications Controller
  3 unknown Device

  Tried updating drivers connecting via ethernet cable to the modem, but nothing helped.

  Can anyone help?

  Hello

  Have you installed the driver WLan?
  The laptop seems to be equipped with the Atheros AR9285 WiFi card and in most cases the Fn + F8 key does not work because the Wlan driver is not installed or is not working properly.

  Recommend first of all remove the network card wireless from Device Manager, then restart the laptop. After restarting again install the new driver Atheros Wlan downloaded for this wlan card.

  Here you can find all the drivers Wlan published by Toshiba:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

• I can't print. It says local print spooler does not work, restart the printer or machine.

  I use windows7, I can't print. It says local print spooler does not work, restart the printer or machine. I can not install, or add the printer currently installed in my computer. Help, please.

  Original title: printer

  Hello

  The print spooler is the mechanism that will interface between your application and the printer and coils (sends) the print job to the printer. It should start automatically when you start your machine. So, restart your computer and try again. I suspect that the real problem is to find why the print spooler has stopped in the first place.

  After trying again, see what happens and if your print spooler stops again, the real work will begin.

  Kind regards

  BearPup

• I can't start my print spooler, as it says that the following file is missing. How can \WINDOWS\system32\spoolsv.exe I download it?

  I can not start the print spooler as it says that the following file is missing.  C:\WINDOWS\system32\spoolsv.exe.  How can I download it?

  Do a search on your computer, it may have been accidentally moved to another directory. You can also run the System File Checker:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  or you can just try to copy the file from another computer.

• Icon 'Remove hardware safely' is constantly on and off the taskbar

  I just bought an Inspiron 1525 and for some reason any "remove hardware" icon keeps coming on and off the taskbar (and beep every time) without any particular reason? It does what I write this note, even though I have nothing connected to the USB port or the laptop at all, except the power cord? I don't understand that I am not wanting to disconnect anything USB ports/laptop? It drives me crazy, can someone help me please?

  Message edited by Little B in Toronto 2008-05-11 19:19
  
  

• Want to 4502eAiO: print SPOOLER STOPPED message. WITH THE HELP OF HP ENVY 4502 AND ACER ICONIA TABLET?

  Have had problem and cannot print. The print spooler if am stopped message. Whenever I look for support with that it seems as if all suggestjons are on Windows or Mac. How do I even stop and restart the print spooler please?

  Hi there Lesyl,

  I see that you cannot print because of an error regarding the print spooler. Have you tried to remove data from the app to the spooler? For that; Settings > Apps > Plugin printing HP Service > clear data.

  Another thing you can try is to start the table in safe mode and see if the print spooler error is always present. How to start your Android phone or tablet in Safe Mode Let me know if you can print in safe mode.

  Don't forget, the laurels is as the version of the Internet to a High Five!

• How can I fix a printer spooler issue: when I reset the spooler will return to stop mode.

  When I want to use my computer, I have to insert the CD of Lexmark and reinstall it.  My operating system is XP Pro and I use a Lexmark Z55 printer.

  I have to re - install the printer almost after each use.  I went through technical help with Lexmark and they advise me to contact Microsoft.

  The problem is the printer spooler and it will go back to stop mode after each use.

  Would appreciate any help

  Thank you

  I'm not Bruce (although I can see why you might have thought if :-)).

  You haven't seen a 'Version 3' as in this picture (or, as Bruce page, may be Version 2 or both):

  It can be a bit difficult to find the utility appropriate among everything in the Resource Kit.  Try to download just cleanspl.exe there--> http://honestpchelp.com/2011/cleanspl-exe-print-spooler-cleaner/ (which is not my site, but I downloaded the file in the past and it seems to be both authentic and malware-free).

• machine will not go to the sleep mode print spooler always using 50% of the resources

  When looking at the system resources used in the print task spooler manager is always using 50% more. cancel operation and the system will be in standby

  Hi mrgadgt,

  ·        Printer is installed on your computer?

  ·        What is the service pack installed on your computer?

  Try the methods below:

  Method 1:

  Install the latest service pack, please see the link below: how to obtain the latest Windows XP service pack:http://support.microsoft.com/kb/322389

  Method 2:

  Follow the steps below:

  a. Click Start and type services.msc in the search box

  b. Locate the Printer Spooler service

  c. right-click on the service to stop the service

  d. navigate to location: C:\WINDOWS\system32\spool\PRINTERS

  e. delete all files in this location

  f. restart the computer

  g. restart the Printer Spooler service also (follow steps a, b).

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer spool error 'local print spooler service is not in the course of execution-restart spooler'

  Coil Sprinter restart

  my computer crashed few, but I lose my software.  I replaced my card m? ire and a neighbor, HE got most of my programs and the work of electronic mail.  I'm having a problem with my printer spool.  The message I get is "local print spooler service is not currently running-restart spooler. And 0 x 80040707 error DLL function call crashed: Braddprt.check local port. "Then, I got an update that does not work for my brothers printer.  Can someone help me?

  Hi Gin99,

  ·         The printer is already installed?

  ·         Or do you have the error during the installation of the printer software?

  Try the following.

  Method 1: Run the next Fixit tool and see if it helps.

  Problems printing and printing errors

  Method 2: Follow the steps in the article mentioned below.

  Printer in Windows problems

• Windows 7 - print spooler starts is not after the October 14 update

  I have a HP pavilian HPE running Windows 7 professional 64-bit.   After that the windows updates were installed on 14 October, the print spooler service does not start.  So yesterday I used the system restore to go back, and the problem was solved.  Today, I removed some old print drivers and re-installed updates, and now the print spooler service does not start again.

  What should do?

  Hi Matthew,

  Thanks for posting on Microsoft Community.

  We are sorry for the inconvenience caused to you. We will help you resolve the problem you are having with.

  Before following the steps below, I would like to ask you a question in relation to your query.

  You get an error message when the print spooler service stops?

  Try these steps and see if it helps:

  Step 1: Press the Windows key + R on the keyboard, type services.msc and press enter.

  Step 2: You can get the Print Spooler Service in the window and double-click it.
  Step 3: Check if the Startup type is set to Automatic. If this isn't the case, set it to automatic and restart your PC.
  Step 4: Check if the Print Spooler Service restarts automatically on reboot (given that the startup type is set to automatic).

  Step 5: Also check if the status shows running under the status column in the print spooler service.

  I hope this helps!
   
  Download to us if you have any questions about Windows, we will be happy to help you.
   
  Thank you.

• Error print spooler "Windows cannot connect to the printer.

  Plug in the printer and I left the pc automatically download the drivers and the printer name is recognized, and then when I try to print I got this message "Windows cannot connect to the printer. Local printer spooler service is not running. Restart the spooler service or restart the machine.

  Click Start, type: Services

  Press enter

  Scroll down and select the print spooler

  Click on restart or play button in the toolbar.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Print spooler does not appear in the Services

  I had uninstalled my c4680 hp because of all the probs I had and it uninstalled my print spooler local in services.msm I tried to pick him up and he is not there I need some help here because I can't print anything on anything.

  Flymar01

  OK to close it, I found it finally.  I made a script to another post somewhere and it worked. Just added to the services.

  Thank you

  Flymar01

• Alternate the background color on and off the toolbar

  Hello

  I have a request. I use Firefox regularly and change the background color in the "content" of the preferences section is easier on my eyes. However, on some sites I would like to disable this function, but I have to go to the preferences it off and then turn it back on once I have leave the site.

  Is it possible for you to make a button that can enable this setting and disable the toolbar? That way if I need to see pictures on a site I can click on the button and then click again to turn it off.

  Kind Regards,
  Bobby
  

  See if this extension - https://addons.mozilla.org/en-US/firefox/addon/toolbar-buttons/ - has the functionality you need.
  Support forum for this extension is here - in case you need to do a custom for your function button:
  https://codefisher.org/Forum/2/