Print the best configuration of work - inside edge crosstalk between facing pages?

Similar Questions

• HP Envy 5540: Printer Hp Envy 5540 randomly printed the Network Configuration Page

  Hello!

  I bought this printer about a month ago. Set up the connection to the printer wireless with my wifi, and my understanding is that the printer is protected like my wifi and use the same password in order to print something. I kept my printer connected and 'standby mode' since I put in place. The night last at about 23:00 when I was in bed, the printer turned on randomly and printed a "wireless network configuration page" that has had a lot of information, including the IP address and listing my name wifi as well as the names of my neighbors wifi in the surrounding apartments.

  I'm trying to understand why this printed, because I certainly did not do. Anyone have access to my wifi, or has someone may simply try to print something and selected my printer as it should appear on the "list available connections on the computer of anyone, given that the printer is turned on? How could they print this sheet of network configuration if my printer is password protected?

  I'm mostly concerned about someone who has access to my internet if they could print this page somehow, but maybe it happened just when they tried to connect to it, and it did not work while trying to fix MY printer?

  I would appreciate any idea on the issue.

  Thank you!

  Hi @printerprob5540,

  Welcome to the HP Forums!

  I saw your post on how your HP Envy 5540 randomly print a Network Configuration Page. I'm happy to help with this problem!

  I find it very strange considering the only way to print the Network Configuration Page, AFAIK, is with the following steps:

  • Make sure that there are size A4 or US Letter, unused, plain paper in the feeder.
  • On the printer Panel, drag the screen to the left and then press Setup.
  • Touch tools.
  • Drag upward on the screen and then tap Network Configuration report.
  • A Network Configuration Page prints up to three pages of information.
  Figure: Example of a Network Configuration Page

• LAPN300 - the best configuration for 3 access points, while using the same SSID

  Hi all

  What is the best configuration for 3 x LAPN300 located in various places around my house of 3 floors, access points if I want just one SSID?

  I did some initial research which suggests that I can use the same SSID on all three, as long as they are on different channels. 1, 6 and 11 for example. In theory, then, as I wander around the House the client machine must auto swap to the AP with the signal stronger.

  What do you think? What is the best way or do, or could suggest you something else?

  As an aside... If I decided to create a second SSID for the guests at home, I would also want to add wireless isolation to this SSID. How would that be managing the DHCP server on the local network? How would be asked to connect to the SSID has never get an IP if they have been isolated from other clients on the local network?  Besides, how they see the router? The ANNUAL lets you specify exceptions to this isolation for this feature?  Alternatively, as I suspect, is the right isolation feature isolate them from other WLAN, not the LAN clients customers?

  I did some testing and configuration of the AP with the same SSID and security will do what you want. Don't worry about setting the channel because the auto channel setting works with these devices and automatically adjusts the spacing between the appropriate channels.

  Recommendation of the VPN_user is what you need if you want to isolate the SSID comments from the rest of your network clients.

  Isolation of SSID of the AP will guard only wireless devices to communicate with each other on the same SSID on which it is enabled.

• What is the best configuration of network with 4 NICs (2 x 10GB and 2 x 1 GB)

  I have 4 hosts running ESXi 4 Enterprise license with 2 x 10GB and NIC 2 x 1 GB, what is the best configuration of network to be used in this configuration? where FT logging should go? I can't add NICs more because it is on the HP blades.

  It's my current setup:

  

  Thank you

  Dan

  You talk about the c3000 blade enclosure, aren't you?

  For a solution tolerant when disaster strikes, you will go probably with:

  VSwitch0 has.)

  Physical NIC: vmnic0 (1 Gbps) + vmnic2 (10 GB/s)

  (A.1) VMkernel Port Group (network management)

  vmnic0 = standby

  vmnic2 = active

  (A.2) VMkernel Port Group (Vmotion)

  vmnic0 = active

  vmnic2 = standby

  Networks of Virtual Machine A.3)

  vmnic0 = standby

  vmnic2 = active

  VSwitch1 B.)

  Physical NIC: vmnic0 (1 Gbps) + vmnic3 (10 GB/s)

  (B.1) VMkernel Port Group (Fault Tolerance)

  vmnic1 = standby

  vmnic3 = active

  -Default - VMware uses round robin to assign a virtual computer to one vmnic.

  So you don't configure port aggregating on the switches.

  You can, however, traffic using if possible VIRTUAL networks, this is why you must configure the ports as junction ports.

  André

• What is the best way to work with Word documents in The InDesign CS4?

  I work in Microsoft Word 2007 and all my documents have.doc format.

  What is the best way to work with Word documents in InDesign CS4?

  David Blatner says to avoid copying and pasting text from Word instead of placing (Ctrl + D).

  How to paste RTF or text Document?

  I want to do a book layout in ID CS4 and its main feature is that there is the left page with the text and the right - with graphics.

  So, if I understand correctly place the text on each page I create for example 70 Word documents and place each element on 70 pages left?

  He loks like wasting time. I have supplements another way to make such provision?  What kind?

  It is best to place any text.

  You can have all your text in a single file and debit allows you to add text, images and pages as necessary block (hold down the SHIFT key when you click the loaded text cursor), but it is somewhat atypical for the thread on one side of the spread in the perspective of automatic flow, so you don't have to set up properly.

  It is a case where a block of text that you type will work to your advantage. On your master page, add a text block to the left page, but not to the right (or at least not donned one to the right - for another project you can actually two threads of independent text). Hold the cursor of the load on a frame on the left side of a page document and auto-flux. ID will add new spreads as needed, but only to put the text on the left side.

  Peter

• What is the best size to work with?

  When you are working on the creation of an image that you cannot print or online, what the best size of canvas to implement? I know that more Web, more memory, it resumes, but what happens if you want to create an image that will have many small details in?

  Something like twice the resolution of your monitor.  Which would give you a possibility of zoom of 2:1 for fine detail work.   If you have a smaller screen and the resolution of your screen, then maybe three times.

  You can always thin creat of the elements detailed in another folder and bring them as dynamic objects.

• What is the best configuration of PC for first Pro CC? Is it more cores or more RAM or GPU?

  What kind of PC configuration is the best solution for 4K video editing in first Pro CC?

  Someone says is the CPU: another is the Ram... I m confused on denunciations. Is perhaps a good solution?

  • Intel 7 5960 x 8 cores
  • Ore 64 GB of Ram 3000mh more...
  • PCIe SSD 512 GB m2
  • SSD 840 Pro for OS
  • GForce Titan x

  Now, I have:

  • Intel 7 3770 K
  • Titan x
  • 32GB 1600mh
  • Takt 4.1GH

  Hope someone can tell me the best solution for this.

  Thank you

  [transferred to the Forum Hardware by mod]

  the new processor is E broadwell, be they a few months. the desktop version of ordinary broadwell (non-extreme) was in trouble and has been for the most part ignored by intel. they released a refresh haswell and then skylake. a few tokens broadwell who have come showed pretty good performance on haswell improvement, then maybe we could see the same thing in broadwell-e. If you want a 5960 x, it could be a few sales in order to reduce inventory before broadwell-e is released, either of people selling used to enter the new broadwell-e...

  the samsung 950 pro is several times faster in speed and low latency vs ssd sata. I see the main advantage of the samsung 950 pro using a player to the media and the drive cache/previews. with small bitrate of codec, a regular sata ssd should be end. very high-speed raw images that may actually need the samsung 950 pro would only hold a few minutes on the small 512 GB drive.

• What is the best configuration of battery for lenovo 420 s

  I read on the lenovo Web site, you can get up to 9 hours on the thinkpad 420 s and I was wondering if anyone knew the farm configuration to achieve this setting? Up to now I get only up to 3 hours IF I have it on very low performance. I generally keep a maximum performance when it is plugged. Anyone have any ideas?

  I think that would be carried out using a battery 9 cells more the extra battery that can replace the optical drive in Ultrabay housing. http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.workflow:item.detail?...

• The tab does not work inside the Scrollpane (AS3)

  Hello

  I have a movieclip with some input text fields. It's like a form. I need to use scrollpane due to its size. If I join this movieclip in the scrollpane component, the tab does not work between these text fields. When I press the tab, the focus moves to the scrollpane himself.

  I tried to set the tabIndex to the textfields. tabChildren and tabEnabled to true for the ScrollPane, but nothing seems to work.

  Please help if anyone has a solution for this.

  Finally found answer on another post. Add the following line of code solved my problem.

  sp.focusManager.deactivate ();

• What is the best way to work! Local or remote...

  I work with Dreamweaver for about 4 months now, but I'm hard-pressed to find how the more preductive to work.

  You work in the local or remote view.

  With local all links with all images need to be changed when goes live, but it's a lot of work to have to go through all the pictures again.

  What do guys do?

  If your link paths work locally at the premiere, but doesn't work on the remote site, there is definitely something wrong with your site definition.

  The site root directory should not appear in your local files Panel.  It must be set in your settings of remote server only.  See screenshot:

  

  Nancy O.

• Play the old configuration of work station

  Hello - I have an old configuration of a vm, version 4.x workstation - I tried to play, but the message said he was too old - is anyway to fine-tune this config to play? Thank you

  Simply change

  config.version = "7".

  virtualHW.version = '3 '.
  TO

  config.version = '8 '.

  virtualHW.version = "4".

  or simply use the shortcut function to change the virtual hardware.
  Its 2 or 3 clicks (menu > vm > manage > change the hardware compatibility)

• The best configuration recommendations

  We spend all our servers (virtual and physical) to all Essentials Plus take advantage of the AH.  We bought a SAN to use for shared storage.  Here's what my plan was and I would just positive, negative, and recommendations.

  3 Dell 710 guests

  1 TB SAN 18 for shared storage

  About 15-20 VM

  1 physical dell server

  I'm 3 710 with ESXi of loading and pointing to the farm of the virtual machine to the San.  I'm fine with the part.  The virtual machine will take advantage of the HA and move among the 3 guests if necessary.  The important thing, with that I'll back puts vCenter Server on the physical machine.  The physical machine will act as a Backup Exec server.  We use external hard drives as backups, and they seem to work well better connect on a physical box.

  Should I put the vCenter on the physical box or as a virtual machine with the farm on the San?  I get nervous to have on the SAN if the SAN dies.  Is not something to fear?

  vcetner on a virtual machine is very good.

  If the san dies then you loose everything anyway, have vcenter on a physical habit help...

  This is what your backups are for.

• What is the best storage option [work] for PremPro CC

  Hi people,

  I am currently building a new workstation whose primary use will be to Photoshop and Premiere Pro. I've covered the bases with the following equipment:

  CPU: Intel Core i7 Extreme 4930 K 3 .4GHz Socket 2011

  GPU: 3 GB PNY NVIDIA Quadro graphics card K4000

  Memory: DDR3 Corsair Dominator Quad Channel 2133 * 32 Gb

  OS: Windows 7 Pro 64-bit running an SSD dedicated offshore

  
  

  OK, maybe it's a bit excessive, but it gives me flexibility, and a few years grace before some other technology hits the fan!

  
  

  Where I struggle is storage.

  
  

  Could you please share some examples of life real wrt storage scenarios. Photoshop is quite easy but PremPro is a demanding beast, and I'm not sure whether to implement what I should use. On-board physical space is not a problem [Obsidain 900 d case] but storage can be very expensive, and I'd rather have this right first time. Just to be clear, I'm afraid with storage in a work situation and backup, not external archiving.

  
  

  Thank you in advance.

  
  

  Lyndon

  http://ppbm7.com/index.php/tweakers-page has several connections to the right information

• What is the best configuration of RAID practice for ESX 3.5 operating system

  Hi all.

  Recently, we encountered a problem.  After the failure of one of the hard drives in RAID 1, all file systems have passed in read-only mode. This table is used only for ESX 3.5 OS. Someone knows how to avoid similar problems in the future? Wich (1, 1 + 0, 5) RAID configuration is optimal for the ESX 3.5 Server?

  Other debates are: http://communities.vmware.com/message/1264678

  But I think you know very well

• What is the best configuration of matrix Raid for Photoshop?

  I plan to go to a matrix Raid the Scractch level 2 X Solid State 90 GB discs, both also stroage level 3 X Hitachi 2 TB HARD drive.

  What configurations of matrix Raid should I use for each?

  I'd go with RAID 0 for Scratch disks, as you need no redundancy for safety. For your image files, you'LL want redundancy.

  Well written for video editing with PrPro, this ARTICLEwill give you general information.

  Good luck

  Hunt