Print without model

Andy,

Continue on my question on thread: creating a free form report, the problem with the impression that the browser is the model will appear. I have 15 theme and two-legged level. All my readings seem to tell me that I need to install BI publisher or XSL - FO for printing the form formally. If this is not the case, what I do to print without the model showing?

Thank you
Yivon

Hi Yivon,

If you go to the components shared, themes and click on change the theme (in the task list on the right) and choose your theme, you will see a section called "component Defaults. In there, offers a framework for printer Printable Page. The model shown it is one that will be used when you add the YES at the end of the URL parameter. This is usually simply called 'Printable Version '.

If you want, you can create your own Printable Version page, but the default should normally be ok with a slight adjustment. If you go to this page template, you will see that things like the tabs are not defined but is add a #NAVIGATION_BAR # setting somewhere (see below).

Now for the printing options and back.

Very often, the impression is a Navigation list item. Access shared components, the Navigation bar entries. Click on create. Give the new element, a number sequence and a value to print text, and then click Next. Let the Type of target as a "Page in this application. Set the value Page at & APP_PAGE_ID. (which is the current page) and check the box print version. Click Next, and then create. You can create the option Back in exactly the same way, except that you leave the box checked.

Each item in the navigation bar can be displayed conditionally based on the value of an element of PRINTER_FRIENDLY application that maintains the Apex for you. The value of this will be YES or no. Just use the "value of element in the Expression 1 Expression 2 =' condition and put PRINTER_FRIENDLY in 1 Expression and either YES or NO in Expression 2. No parameters should use quotes.

Now you must make sure that the navigation list is displayed on the page Printable Version template. It must be done at a location near the upper part of the body on the model setting. How depends on your theme. For example, using the theme 3, I changed the start of the body of:

<table summary="" cellpadding="0" width="100%" cellspacing="0" border="0">
<tr>
<td valign="top">#LOGO##REGION_POSITION_06#</td>
... etc ...

TO:

<table summary="" cellpadding="0" width="100%" cellspacing="0" border="0">
<tr class="navrow"><td colspan="3" valign="top" align="right" class="t3NavBar">#NAVIGATION_BAR#</td></tr>
<tr>
<td valign="top">#LOGO##REGION_POSITION_06#</td>
... etc ...

This adds a new line to the top of the TABLE of the body tag. Note that I gave you this line a class name of "navrow.

Now, we can use a special feature of CSS styles. All styles can be created to be used only when the object is called is displayed on screen or sent to the printer, or both (which is the default, of course).

As part of header, after the string of #HEAD #, we can add to the hairstyle only printer to the class 'navrow:

... everything above #HEAD# ...
#HEAD#
<style type="text/css" media="print">
.navrow {display:none}
</style>
</head>
... everything after </head>

Now, when the page is being printed, all on the shipping line is hidden.

I did it on this page: [http://apex.oracle.com/pls/otn/f?p=41075:1]

Andy

Tags: Database

Similar Questions

Printing without the duplex printing accessory attached

Hello

Is it possible to remove printing accessory duplex (thing of type cartridge at the back) and still be able to print front? I tried to disable the option to double-sided printing and print without the accessory, but it did not work. By checking the forum for similar queries, it seems that there is a fair bit of people who have had problems with the automatic double-sided setting so maybe there is something to it, or maybe it's impossible?

I can't find a storage unit for the printer and he won't fit in those I saw if I remove the double-sided accessory. As we do for most photo printing, I am pleased that on the rare occasion, I need to make two-sided printing, I can get out of storage and put back the accessory. Just need to make sure it prints without it on until I take it off.

Thank you!

SB

The duplexer can be deleted, but it would need to be replaced by a non-duplexeur rear panel, who will lead the paper correctly. What model of printer you have? He came back with a plain Panel? Most of the printers that have the standard duplex module do not have the plain rear flat panel...

DeskJet 6988: prints without custom border deskjet 6988

I want to make a card (5 x 7) which means I have to print 10 x 7. I tried to do a custom size by clicking on "without borders"but I still have the white border.» The option without borders works with no custom sizes?

Hi @mhm45,

Can I have found some information about you on your Deskjet 6988 borderless printing options.

Please NOTE: With all models, print custom page sizes are n ot guaranteed from Windows, it usually ends up being a limitation of the operating system presets. All these settings are error.

I think you're right, it should use an option without border defined by the operating system - but you can review the information provided in the user guide for printing without margins to see if you missed something. PG 59-61.

This information has been in the User Guide for the Deskjet 6988;

Print borderless photos

Use printing without margins to print to the edges of some types of paper and printing on a variety of paper-paper photo sizes 3 x 5 inches to a custom photo size 210 x 594 mm (8.5 "x 23.4").

Guidelines

● For high quality results, use a print cartridge photo in combination with the print cartridge three colors.

● do not print photos without a border in ink-backup mode. Always have two ink cartridges installed in the printer.

● Open the file in a program such as Adobe Photoshop or HP Photosmart software and affect the size of the photo. Make sure that the size matches that of the paper on which you want to print the photo.

● If you have installed the HP Photosmart software, you can use it to assemble panoramic digital photos before printing.

● For maximum strength, use HP Premium Photo paper.

● Check that the photo paper you are using is flat. For more information about the prevention of photo paper to curl, see photo paper storage instructions.

● Do not exceed the capacity of the tray in: 25 sheets of photo paper.

Prepare to print

To print a single small photo, use the photo/envelope feeder.

To print several photos or more, follow these steps:

1. check that the printer is turned on.

2. for small photos, remove the output tray. For large photos, lift the sliding top. Remove all paper from the tray in. 3. drag the width of the paper all the way to the left guide and then pull out the paper length guide.

4. check that the photo paper is flat.

5. place the photo paper in the tray, with the side to be printed on the bottom. If you use paper photo with a detachable tab, check that the tab is so opposite of the printer.

6. slide the paper guides against the paper.

Note: Some formats of panoramic paper may extend beyond the edge of the In tray.

7. for small photos, replace the output tray. For large photos, lower the output tray.

Print

Note: If the software includes a photo printing feature, follow the instructions that are provided with the software. Otherwise, follow these instructions.

1. open the photo in an application that allows you to edit, such as the HP Photosmart or Adobe Photoshop software.

2. open the printer properties dialog box.

3. click on the shortcuts tab print Chapter 5 60 HP Deskjet 6980 series

4. in what you want to do? drop-down list, click borderless Photo printing, and then select the following options:-print quality: normal or best. Note for maximum dpi quality, go to the paper/quality tab and then click Maximum dpi in the drop-down list print quality. -Paper Type: A picture appropriate paper type - size of paper: a paper size appropriate photo without margin - Orientation: Portrait or landscape

5. set the HP Real Life technologies.

6. click OK to print the photo. If you have printed on paper with a detachable tab, remove the tab to make the document completely without borders.

Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

I look forward to hear from you!

Thank you

How to move a local network printer without having to reinstall the drivers

Hello

Is it possible to change a printer to a network printer on a local printer without having to reinstall the printer drivers?

The computer on which the printer (a Lanier LP116c PCL 5 c) is currently connected [directly] is running Win XP. It is a stand-alone computer without any connectivity; network, internet ect. He has no printer drivers installed because the computer had been connected to another computer by using working groups and was able to print at the Lanier through working groups. But now that there is no longer connected to the 'network', but rather directly connected to the printer, it will not be printed.

I tried to change the properties of the driver to "tell the computer" that the printer is now connected directly however when I try to open the properties I: "printer properties cannot be displayed. The print spooler service is not running.

How to 'know the computer' that the printer is now connected directly without having to reinstall the dirivers?

Thank you!

Carrie

You have two questions. One is assigning the correct port for the printer and the other is fixing what is originally the print spooler service to not run.

As much as I can give you guidelines on how solve the second problem, it will be much easier for you to uninstall and reinstall the printer (once the print spooler works again) that in order to create a "USB virtual port" which is what needs to be done unless the computer was once a printer connected by USB is installed.

Often, but not always, an order print spooler is the result of a corrupt print job stuck in the queue or a damaged printer driver. However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

AntiMailware MalwareBytes
SUPERAntiSpyware

Do not operate the two scans simultaneously. Each will take a long time, so start it and then go do something else for a while.

Cleaning of printers

NOTE: If you have ever had (but retired) a Lexmark or Dell - badged Lexmark printer installed, the command "net start spooler" to step below may fail. In this case, type the following line in the black command prompt window and then type the command "net start spooler" again:

dependent on the spooler of sc config = RPCSS

Note that there is no space before the =

If still no joy, use the alternative method that is linked below.

A. Clean on print jobs pending
- Open a command prompt window (start > run > cmd > OK)
- Type the following in the black command prompt window, and then press ENTER after each line
net stop spooler
del/q '% windir%\system32\spool\PRINTERS\*.* '.
net start spooler
output

B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

Alternative to the method of his first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Once the print spooler has started, click Start > printers and faxes, right click on the Lanier printer icon and select properties and select the Ports tab. If you already have a USB connected printer installed on this computer, there should be a port named USBnnn. If there is, check the box and OK your way out and your printer should now print when connected by USB. If there is no USB port listed, then do the reinstall as explained in an Article. The driver install package available here should create and install the USB port for you: http://www.lanier.com/downloads/driverFrame.aspx?path=http://support.aficio.com/bb/html/dr_ut_e/lan_u/model/c30e/c30een.htm

printing without margins

If I use my Canon easyprint utility to select a photo and ask it to print without margins on photo paper 4 "x 6", it does so without effort.
However, if I select a photo in lightroom he always puts borders around the photo. is there a simple setting to say print this thing on 4 x 6 borderless?
Thank you
David

David,

Printing in LR is made via the print module and is based on any model is loaded when you press the print button. Generally, the default templates have borders on them, but can be disabled. I create a user called 'My Borderless 4 x 6' model and change the options you get a picture really 4 x 6 borderless. Then simply select this template whenever you want to print this type of photo.

I have one 5 x 7, 8 x 10, 8.5 x 11, etc and use them regularly.

Jeff

Epson R2880 will not print without margins in PE8 or Lightroom

Why my Epson R2880 will not be printed without borders in PE8 or Lightroom 3 when he's with Epson Easy print. I use OS x 10.6.8 and driver Epson 8.6

Right. Try this. When you are in the print PSE window, go to layout, make sure it is set for your printer model and choose the option without borders for the size that you want there. Is that is chosen in the PSE dialog box change to account for that?

The print is so small. How can define you default largest size print without having to click the icon on each page?

The print is so small. How can define you default largest size print without having to click the icon on each page?

The Firefox Page Zoom feature makes a domain level by area to save favorite settings level users zoom, there is no default Page Zoom level setting in Firefox, as with some other browsers.

Try the extension Default FullZoom Level:

https://addons.Mozilla.org/en-us/Firefox/addon/6965

Or the NoSquint extension:

https://addons.Mozilla.org/en-us/Firefox/addon/2592/

HP Officejet Pro 8620 does not print, but the document is sent to the printer without error

I bought a HP Officejet Pro 8620 and connect 2 computers via a wireless connection with the latest driver.
In the first computer (windows 7) I can print without any problem
On the second one (windows 8), when I try to print, I can see in the windows printer spooler file that I'm going to print. The file is sent to the printer, without error, BUT nothing happens.
I already tried reinstalling the drivers, restart the computer, the printer. I tried to connect to a wired network. It still does not. It's very weird but I got no error, just does not print. I thought that the printer does not work, but on the second computer I can print.
Thank you for your advice

Hello

Please download and run the HP print and Scan Doctor www.hp.com/go/tools

HP OfficeJet Pro 276dw: printing without margins

How can I set the printer to print without borders?

By default, it always shows a margin of 5 mm.

Thank you!

I don't think you can; According to the User Guide manual OfficeJet Pro 276dw , minimum margins of 4 mm on each side:

Does not print without the rights of administrator - Toshiba e-studio 2

Excuse for my English.

A question: does not print without administrator rights.
I do not know is that a problem?

As it is possible to allow for the press with the rights of the user.

Toshiba e-studio 206

Hello

You intervene on the Toshiba printer

According to your message, the printer does not and doesn't print because the user does not have authorization right.

You can change try to assign the admin right to the user account.
You can also try to assign only a right to the user account.
In this case go to-> printer & faxes Control Panel
Choose the printer-> right click-> properties-> tab security

There you can assign printer preferences

Welcome them

Office Jet 4620: Connect wireless printer without USB cable

I have a desktop HP 4620 jet. He was hanging in my old router. When I tried to join software router again asked me to use a USB cord. I do not have a such cord for this printer and want to set using the wireless, but sofeward me continues to send at the option of the cable. The router is ATT U-verse. I need step by step instructions on how to connect the wireless printer.

Thanks for any help.

Hello

HP Auto Wireless automatically sets the printer without connecting it to a USB port, only if your computer is also connected wireless to the network. If your PC does not have wireless connectivity USB cable would be necessary, except if your router supports WPS.

If your PC is connected wireless to the router, restore the pritner as follows:
1. Click on the WiFi the printer button and select restore network settings, confirm and invites.
2. Click on the Setup (wrench) and select Tools, then restore the default settings and confirm any command prompt.
3. Turn the printer off and turn it back on
4. Open the HP Officejet 4620 software and follow the instructions to connect a wireless printer.
Another option would be the WPS Pin Code or button WPS, if your router supports supported such a, tap the icon on the printer wireless and select WPS or Wireless protected Setup, follow the steps on the screen, press the button of your router or a PIN code, see the documentation for your router to check the capabilities of WPS.

If none apply to your PC printer or yout, use a wireless computer connected or get a USB cable for the installation of hht, so a cable was supplied with the printer.

Kind regards

Shlomi

Printer model DesignJet T1500: need date of the lifecycle for DesignJet printer T1500 - model CR356A

Please indicate the date of the life cycle (or end of Support) for DesignJet printer T1500 - model CR356A

Hello

You can contact HP for the info.

Best regards

Mike G

HPLJ printer M6 - model M605n: need the date of the life cycle (or em) for M6 Printer HPLJ - model M605n

Hello

I need the date of the life cycle (or end of Support) to HPLJ printer M6 - model M605n.

Where is the best location / # to find the dates of the cycle of life for HP products?

Hello

You can contact HP for the info.

Best regards

Mike G

Print without margins

I would like to know how to print without margins.

My printer (Brother MFC-J6920DW) peut print without margins .pdf made by others and also prints borderless of OS X Photos. It makes me quite confident for the driver or printer are the problem, even if the brother helpdesk said «We cannot print without margins on Mac»

When I try to print directly from for example Mail, Illustrator, Photoshop or an Illustrator is open in preview, .pdf printer driver preview will display a thumbnail preview without borders, but no matter what settings I use, printing will be always a border of 3 mm / 1 / 4 inch around the edge of the paper.

How can I fix it?

Do you have a solution to this problem, I recently have a problem too.

Previously, I ran on the same machine you without borders of Macbook.

HP envy 4520: cannot print without directly using wireless

I want to hp 4520. I want to print without using the direct wireless to my laptop. I always disconnect my home wifi network and use network want to live to be able to print wireless. Is it possible to print from my laptop using my local network, or I have to use the direct wireless to be able to print.

Hello

Try to remove the printer and then add it again by opening the Preferences tab and then selecting «printers & scanners»

From there, click on the sign less under the printer icon to remove the printer and then add again using the sign.

This may help to solve your problem of connectivity.

Print without model

Similar Questions

Maybe you are looking for