Printable DVD?

Similar Questions

• Printable DVD bleedthrough problems

  I asked this problem by my boss yesterday, she said, she heard people say that they have seen some issues with the permanent markers (which I have and I'm sure that others use to write about them) through the printable DVD of bleeding and affect the data on the DVD. Has anyone heard of this or had problems? And what of the ink in printers used to make professional looking labels, as I sometimes do?

  The solution it is heard is to write on it with a pencil. But then again, what about when you must make their professional look and print them with jetprinter?

  Any thoughts would be appreciated.

  I found a discussion of this here: http://www.wisegeek.com/can-i-use-a-marker-on-a-cd-or-dvd.htm

• Epson r200 printer printable dvd/cd

  I tried to install the software CD print Epson R200 directly from Epson Web site several times. Download, reboot, etc.  An error continues to appear saying that the download has been incorrectly installed on the computer. I use windows Home premium 7 64-bit.  the drop download automatically recognizes the operating system properly. Any body met this problem with the R200 or R300 Epson software? Please refer to associate advanced instructions to resolve this problem.  Thank you, ej.

  I tried to install the software CD print Epson R200 directly from Epson Web site several times. Download, reboot, etc.  An error continues to appear saying that the download has been incorrectly installed on the computer. I use windows Home premium 7 64-bit.  the drop download automatically recognizes the operating system properly. Any body met this problem with the R200 or R300 Epson software? Please refer to associate advanced instructions to resolve this problem.  Thank you, ej.

  You mean the Epson Stylus Photo R200 Ink Jet printer?
   
  And that you have downloaded and installed not only the Epson Print CD v2.20 utility, but first downloaded and installed the printer driver for the device and rebooted?
   
  If not, or you are unsure, try this:

  1. Unplug the device from the computer (physically).
  2. Uninstall anything and everything that is EPSON concerns.
  3. Turn off the computer.
  4. Connect the device to the computer (physically).
  5. Power on and log in.
  6. Make sure that your computer is connected to the Internet.
  7. Click on and select devices and printers.
  8. Select Add a printer.
  9. Select Add a local printer or add a network, wireless or Bluetooth printer.
  10. Choose your printer port.
  11. Click on Windows Update and wait for updating the list of printers. The update may take a few minutes.
  12. Select EPSON as the manufacturer, then scroll through the list of printers and select your printer. Follow the on-screen instructions to complete the driver installation.
  13. Download (and SAVE) the utility v2.20 Epson Print CD.
  14. Reboot (restart).
  15. Find the saved file "epson14528.exe" and do a right click on it and "Run as Administrator".
  16. Follow the instructions to get installed it.

  Not better?
   
  If not - you * will * get in touch with Epson.  Their product, they support all the support for this regardless of your chosen operating system.

• Toshiba DVR20 TNT does not write properly DVD discs

  _DVD machine: _
  Toshiba DVR20 DVD and VCR recorder Combi TNT

  _Type of DVD: _
  Non-printable DVD-R blank disc

  _Problem: _
  DVD plays fine on a DVD but be blank DVDs on computer. Advice please.

  Hey Buddy,

  I googled for Toshiba DVR20 TNT device because it did not for me.

  It seems that this recorder to support DVD-R/RW drives and DVD + R/RW for recording.
  I recommend you test different brand disks supplied by different manufacturers.
  It s also a good idea to clean the lens of the laser.

  You can use a special lens cleaner kit. This kit cleanser little expensive which will brush the lens clean. They are available online and in stores that sell some electronics

• Unable to print on CD/DVD printable C5380

  I just bought a Photosmart C5380 to replace my Epson sick.  Load on an iMac than 2.4 GHz with Snow Leopard and all the latest updates and drivers.  Prints and scans very well... almost.  I'm unable to printon a printable CD/DVD.  Lower the door CD/DVD and prssing OK brings up a message telling me to use the CD/DVD software to print.  But I can't find anything.  The manual I have in front of me told me I should use the software provided with the product to create and print on a CD/DVD.  I can't find anything!  I downloaded HP Photosmart studio, but that doesn't seem to work.

  Hey all,.

  When we developed the drivers and software for Snow Leopard, there were some problems getting CD/DVD printing to work.  We decided to go with the release of the software without the CD/DVD printing functionality.  In the meantime, we modified the HP Photo Studio software and got everything working in 10.6 again.

  So, what should you do?

  #1-make sure you have the latest drivers from 10.6 to your printer downloaded and installed from hp.com.

  #2-go here: ftp://ftp.hp.com/pub/united-states/pse/hp_photosmart_studio_software.dmg and download and install HP Photo Studio.

  You will now be able to print on CD/DVD by HP Photo Studio.

• Blank DVD is compatible with Satellite Pro L300D-224?

  I have a Satellite Pro L300D-224 and need to buy some blank DVDs to create the recovery disks.

  How can I find out who is compatible and how buy?

  Hello!

  I think normally you need only 1 or 2 blank DVD for the recovery disks, but I always buy a spindle of 50 DVD - R Verbatim discs. That s a lot cheaper just to buy Virgin DVD s.
  For example, I bought this one for my Satellite L300: http://www.amazon.co.uk/Verbatim-43533-DVD-R-Printable-Spindle/dp/B00097CDHC/ref=tag_dpp_lp_edpp_ttl_in

  I use these discs as in other laptops and PC and never had any problems. I m very satisfied with these discs and manufacturing.

  Good bye

• HP LaserJet M276n printer: printing DVD labels

  What color HP LaserJet Pro 200 M276n able to print DVD labels?

  Hello

  There are 2 types, I don't know that you are asking

  1. print the labels on paper model: you need a good software otherwise most likely you can get arounf 25% of results because the hole don't align. As @wb2001 mentioned above, the label will not long stick and my get stuck in your player.

  2 print directly to DVD printable, well no, your printer will not support it.

  Kind regards.

• How to print dvd labels

  How to print labels from dvd hp 1400

  goob572 wrote:

  How to print labels from dvd hp 1400

  Hello

  You want to print on paper or directly on a DVD printable?

  1. Book: you must purchase the appropriate labels. Very considerate of my experiences the success rate was about 40% and very long.
  2. On DVD printable: Your printer cannot print directly to printable CD / DVD.

  Kind regards

• MG5420 how to print my Art on a CD/DVD?

  Hello

  In the user manual, I see for the digitization of the hull of origin of a DVD/CD and instructions for printing a CD/DVD LABEL document. But I do not see instructions for how to print my work directly on printable CD/DVD.

  When I opens the menu of the main printer to my desktop and click on the "Disc Label Print" icon, I'm able to import my work on the blank template, but then when I Press PRINT, the only options I gave have to do with paper type. A disc is not given as an option.

  Once I was able to put in place to work. But now I forgot the steps I took to have the option of disk instead of paper only.

  I tried to find a YouTube video to help, but the ones I found uses older software and are not very useful.

  Can anyone help?

  Bill

  Figured it out. I had not clicked on "Theme and hand People." That solved the problem.

  Bill

• HP Photosmart D5460 printing problem using the cd/dvd tray

  Just bought a HP Photosmart D5460 solely for printing cd/dvd directly on cd/dvd labels.

  The problem I have prints a label on a Verbatim CD Vinyl.

  It is a normal 80 min CD - r but with an edge of vinyl and a 70mm print Center.

  When put in a fake cd (12mm diameter) cardboard, printing is excellent, exactly as it should.

  But as soon as I put in a CD of vinyl, the label is printed below the disc on the disc tray - holder, approx. 80mm below the mark where it should be.

  It drives me crazy, that everyone has seen this error before?

  Calibration is not help me... Also used almost every label possible software out there (Surething, Acoustica, Nero and Photoshop plain) who all give me the same result.

  Yes, I think that's the problem.

  I cut out a circle of plain white paper, which is the size of a cd and cut out the Center (a little more fat then 70mm of the printable area of the disc). Put on vinyl with tape adhesive tape and now it prints exactly on the label, to make it work.

  The black color of the disc must be the problem.

• phtosmart C5240 all-in-one will not use the cd/dvd tray to print

  OK, so I use essential 3.5 photo to print directly on printable CD. Whenever I try to print, the printer tells me to close the CD/DVD tray, but when I do that, it starts printing the status bar with plain paper. Any suggestions?

  Also connected to the pc via usb and runing win7

  Nevermind found the problem, I myself do not select the type of media correct sorry.

• My DVD will play on my computer but not my DVD player

  I created my first DVD using again, and it seemed to work perfectly. He would like to open and do what it was supposed to do on any computer. However, when I stick it in my DVD player for my tv, it starts the loading process and the two blue horizontal line scroll through the TV screen and then blocks my DVD player. I have to disconnect my DVD player and then plug it upward and quickly reached the eject button to release the DVD.

  These questions below may be for another product... but the kind of information that you must provide is the same for the products you use

  Need someone to help... more information please click below and provide the requested information

  -Organization of information FAQ http://forums.adobe.com/message/4200840

  Something to try (if you're Windows)

  Create an ISO of DVD output file, and then use the FREE http://www.imgburn.com/index.php?act=download to write the ISO to a DVD (send the author a PayPal donation if you like his program)

  .

  Read http://forums.adobe.com/thread/1322583 for notes on the Imgburn WITHOUT any add-ons toolbar installation

  .

  ImgBurn will read the mark of REAL from the disk drive, which isn't always the same as the label for the box (Memorex is known for 'nothing' buy and put inside a box of Memorex)

  .

  When you write to disk with Imgburn, use possible speed setting more SLOW, so your burner has the better chance of creating holes to burn laser "good, well trained"... Since no DVD player is required to play a disc burned, having a 'good' high-quality Virgin will help

  .

  Use Taiyo Yuden simple layer or layer two Verbatim or Falcon Pro for layer two printable inkjet

• Help! DVD plays not

  Hello

  I looked around and could not find my question.

  I imported a sequence of first 5.5 worms again through dynamic links

  I had some project settings for

  fashion design - dvd

  standard telivision - ntsc

  transcoding settings - ncodec MPEG-2

  I tested the DVD on my Dell i7 processor, 12 GB of ram

  and it worked fine I gave click to print directly on DVD and burn several hundred copies

  I just got them and when I insert it into my Dell Insiron 6400 laptop (about 4 years) message is: virgins dvd you want to burn files.

  In short, he won't play, but visually it seems as if she is burned

  What I did wrong.

  Any help is greatly appreciated!

  > I tested the DVD on my Dell

  Business DVD players how did you use for testing?

  If you have tested only on the computer that you used to create the disc... you come to know this isn't a good test

  Also...

  Create an ISO (yet), or a folder on your hard drive (still or Premiere Elements), then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO on DVD or BluRay drive (send the author a PayPal donation if you like his program)

  .

  ImgBurn will read the mark of REAL from the disk drive, which isn't always the same as the label for the box (Memorex is known for 'nothing' buy and put inside a box of Memorex)

  .

  When you write on the disk with Imgburn, use the slowest possible speed adjustment, so your burner has the best chance to create "good, well trained" laser drill holes... Since no DVD drive is required to read a burned disc, have a 'good' after a try to white high quality will help

  .

  Use Taiyo Yuden simple layer or layer two Verbatim

  Or Falcon Pro for inkjet printable two layer

• DVD label using

  Relatively new to first Elements 7. I figured out how to make a label using Photoshop elements and same impression. However, I'm a little unhappy with the result. The label that I designed is great. My problem is that the template in Photoshop does not change the size of hub. I print directly on dvd printable inkjet. The dvd, I had have no printable material on the hub, so I end up with ink on the hub that will not dry not in this century. Even removed with q-tips, which is ok for this project, but turned to the future and always accept a better idea.

  What do you use for a model with Photoshop Elements 7?

  Is there a free program that works better? Preferably one that I can import the PDF that I exported from Photoshop.

  Is there a free program that works better? Preferably one that I can import the PDF that I exported from Photoshop.

  Sorry that I did not address the issue of a PDF document. There are some subtle differences in a pure Adobe Acrobat PDF Pro and Photoshop PDF. The main thing is that you can export with editability in PS checked, but there is a little more under the hood.

  Some programs that have no problems with a PDF Acrobat file (provided the version is compatible), are reluctant to Photoshop PDF. It of a great format to send to a commercial printer and supplants the EPS as the standard. Yet, some programs do not make a perfect playback of files PDF the PS job. For this reason, I would not use this format, however it is good for other things.

  As I said elsewhere, I'm going with a JPEG high resolution (one of the few times where I never use this format, except for the Web work), and they import fine in most programs that can handle images. I always keep a copy of all workers. Photoshop PSD, in the case where I have to change.

  Good luck and sorry it took so long to answer your last question,.

  Hunt

• How to erase a DVD - RW - macOS Sierra

  Hello

  I can find the option how to erase a DVD - RW on macOS Sierra.

  Hold down the Ctrl key and click the CD or DVD drive in the side bar of the Finder, and choose erase the rewritable disc in the context menu no longer works.

  It is stil works on OS X El Capitan as Apple describe here ☞ OS X El Capitan: burn CD and DVD

  Thanks in advance.

  Try disk utility, select the DVD in the box and click clear.