Printer 1700 stop working, all the lights on

Similar Questions

• Printer Interface stopped working, change the settings on Data Execution Prevention

  My computer Data Execution Prevention keeps stop my printer to work from time to time.  He tells me that the printer Interface has stopped working... I tried to change the DEP settings, but I can't find a file for my printer to be added to the FILES that won't interfere with the DEP.  I don't know how to do this.

  Hi lindabob2008,

  1. did you of recent changes on the computer?

  2. What is the full error message that you receive?

  3. What is the serial number and model of the printer?

  I suggest that you run the troubleshooter printer available in the link below and check if it helps.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

   

  If the previous step fails then I would suggest you install printer drivers updated by visiting the site of the printer manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Adobe Reader has stopped working, all the solutions?

  I'm having a problem with Adobe reader X.

  I open the program and it works normally, nothing to report.

  Whenever I close the program I get the error message "Adobe Reader has stopped working)

  I'm on Win 7 (32-bit) SP1

  all ideas/solutions for this situation?

  Thanks in advance

  It worked for me on Win7 Pro 64-bit:

  Open Adobe Reader X (10.1.1)

  Edit... Preferences... General...

  Uncheck 'enable protected startup mode '.

  Close and restart.

  I use Symantec AV, I can easily believe it's an irritating inconsistency between what Adobe is trying to do and what Symantec is trying to do.

• Firefox has stopped working all the

  I just tried to open Firefox as usual and it won't work. When I click on a new web address is trying to load it reloads the initial page even. An update has been installed previously and it seems to have stopped working.

  Is it possible to revert to the previous version?

  Please see also solve connection problems to websites after Firefox update

• somehow my printer has stopped working and the computer tells me that an unknown error has occurred - can someone tell me what happened

  My printer no longer works the computer tells me an unknown error has occurred, can you help me understand?

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  http://support.Microsoft.com/GP/printing_problems

  Read the information above from Microsoft about fixing printer problems.

  ·

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• my cd drive just stop working, all the controls to say everything is fine, what can I do now

  It worked very well, and this week still the cd doesn't work do not, it acts like it is read, but then just stops

  Hello

  1. What is the operating system installed on your computer?

  2. you get any error message?

  3. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/314060

• My oki b2200 printer does not work, but the lights are flashing i dnt know what to do

  I already delet and printer announcement once again.   and I see 2 green lights and 2 flashing umber yet blinking.its only a month old printer.

  Hello

  Because it's only a month, it should be under warranty.

  Contact the manufacturer of the printer for their support.

  See you soon.

• My printer has stopped working and the server RPC unavailable message is popping up. How can I fix it?

  I uninstalled and reinstalled the printer and the fix is not required.

  Hello Foo Foo,

  Thank you for your message.  Let's try the following:
  Click 'Start' > right click on 'My computer' > click 'manage '.
  Click the (+) sign next to Services and Applications > below, click on 'Services '.
  In the right, double-click 'RPC Remote Procedure Call ()'
  Make sure that the startup type is set to "Automatic" and click 'Start', and then click OK
  In the services pane, double-click "print spooler".
  Make sure that the startup type is set to 'Automatic', click 'Start' and click OK as well.
  Test the functionality of your print.  You may need to reinstall your printer.  Click HERE for additional troubleshooting steps.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Numlock stops working on the Qosmio F750

  Hello

  I have a Qosmio F750-11 t. Four days ago, I started my laptop and discovered my num lock stops working. The light still comes on, but the buttons do not respond. I can't turn the NumLock or off and I can ' t produce numbers more with him (or use the pgup pgdn buttons when it should be off).

  I have read a few things on the forum (.com) and updated the BIOS to the latest version, restarted it, but nothing works.

  I bought the laptop 3 months ago only. I would be grateful if someone could help me with this.

  Thank you!

  Post edited by: Tino.Bos

  Hmm, I would say that its dysfunction of the keyboard.
  You can use the Num Lock button using an external USB keyboard?

• OfficeJet 100: All the lights are flashing, printer does not respond

  Sometimes when I print a document that contains multiple pages, pops up an error. During the print job, the printer stops work on the intermediate page (for example - second page), spits out the rest of the blank page and all the lights flashing. The printer does not any action, only a hard reset (disconnect battery). After that, he will normally for a same day behavior, and suddenly many, same error. Printer is mainly used through Bluetooth, but the same error occurs also in the cable.

  I checked almost everything I could, there is no paper jam, cartridges are placed correctly, battery is fully charged, also this page http://support.hp.com/us-en/document/c02643100, nothing helped. It's really annoying, when it arrives of the exhausts. How can I solve the problem? Any ideas? Thank you very much.

  He gets these events:

  69556: event_dirty_power_up

  69552: event_log_no_media_pick

  Hey @Mar_tin,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see that your Officejet 100 is having problems with the paper feed. I can help you with that.

  This document describes How to fix paper jams with your printer. If after completing the document, you still get paper jams, the printer will be replaced. You can contact HP support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know if this fixes the paper jams or if you have other questions. If not, have a great day!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• All-in-One L7550: all-in-One printer L7550 stop working after a Win 10 update

  In the last two days my printer has stopped working after many updates to Win 10.  Functions in fact any printing has stopped (swirling points) to include my PDF SW.  I downloaded the last SW all-in-One and tried to install it.  The first thing that happened is that he tried to remove the previous SW.  Hooked to halfway through it.  Then, it was a nightmare.  I can't get the rest of the SW uninstalled nor can I install the latest SW.  I even tried to install the previous SW in Win 7 compatibility, but after extraction it just stops.  Tried to install the current version in Win 8 conpatibility, but it also wrong on.

  Any ideas wher can I start?

  Welcome to the Forums of HP, @CharlieCC,.

  I hope to help you with installation and uninstallation issues you are having with your Officejet L7550 on Windows 10. Before you get any software troubleshooting, try to make a copy of the front of the printer. If copies work fine, continue with the steps below to work on the issues of software!

  Step 1: perform a level 3 Uninstall to remove completely all the files to your system printer.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose to save money, save it on the desktop: all-in-one printer, HP Officejet Pro L7550
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe (or .bat).
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• My screen saver does not work all the time, usually this seems to happen once the aircraft stopped in the energy saving mode.

  Original title: my screensaver does not work all the time

  My screen saver does not work all the time.  First time I have turn on computer, it works OK.  Later in the day, this isn't.  Usually, this seems to happen once the aircraft stopped in the energy saving mode.  After the reactivation of the computer (do not), the screen saver does not work when it should. How to run all the time?  I am running Kapersky Internet Security 2011.  This would be closed by the screen saver?
  Thanks, Garybuyit

  Hi garybuyit,

  Thanks for posting your question in the Microsoft answers Forums.

  Just so I'm clear, updated you the graphics cards in Device Manager? You have access to a Windows XP installation disc. If so, follow the steps in this document to make a scan of the SFC. This analysis will attempt to repair or replace any missing or corrupted system files.

• HP F2210 printer will not be closed, and all the lights are on. Tried unplugging don't, no results.

  My Hp F2210 printer will not be closed, and all the lights are on. using a compaq presario with windows xp installed. I tried to unplug the unit. Problem has not been resolved.

  I'm sorry that you are experiencing this issue. Sometimes there may be ink system failures, ink cartridges are bad, or even the printer maintenance needs.

  Here is a link that can help you with this problem.

  http://support.HP.com/us-en/document/c01430567

  Let me know if it helps.

• OfficeJet k5400 prints then all the lights light up yellow, power down then turn on printer resets loan

  OfficeJet k5400 prints then all the lights light up yellow, power down then turn on printer resets loan. It's all new HP Officejet pro 8000 to had the power to issue even down to reset.

  Looks like the power module is out. It's the black brick in the power cord. The only way to replace it is to contact HP, but before you do that, try to reset the module. The document following the link will guide you through it. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  The printer will not turn on or respond

  HP Technical Support call case form