Why my C410a printer all in one is leaving a black line in the middle of a scanned page?
I use Windows 7 with my C410a all-in-one printer... and this line does appear when I print the page... it does not appear on the recorded image.
Hello richalter.
Please check this document.
http://support.HP.com/us-en/document/c01622189
Bravo!
Tags: HP Printers
Similar Questions
-
7520 all-in-one offers unique vertical black line
My 7520 puts a single vertical black line in the middle of the page when I scan or copy from the document feeder. I tried to reset by unplugging the power supply, and I cleaned the glass. What should I try next?
Hi mmvegas,
Try to copy blank pages 3 to 5 to see if it's a stuck there small dust particle.
It could also be something on the Jack roller: http://support.hp.com/us-en/document/c02881567
- Remove all documents from the ADF tray.
-
my printer is copying with a black line in the middle of the page
My printer has just started the copy with a black line in the middle of the page. Any ideas what the problem is and how to fix it?
I have a Photosmart C7280 all-in-one printer. Thank you!
This document should help:
-
document feeder prints a black line down the Middle
document feeder prints a black line in the middle of the page
Yes, the warranty is still valid! I bought the extended warranty for the replacement. So I guess I will contact HP for a new printer.
Thank you very much for your help!
Ted
-
I have a belkin n1 vision router and a new printer all-in-one hp Office pro 8500 has, but the
I have a Belkin N1 Vision router and a new HP Office Pro 8500 all-in-one printer (HPA7864C), but the wireless connect. I followed the instructions of the printer, but the better report reports that "MAC filtering" is enabled to possbly (or on) on the wireless router. I checked the router, but the "MAC filtering" is set to off (or off). What could be the issue that the printer will not connect to the wireless router?
Best report:
Without thread - OK
Functions without wire - OK
Network name (SSID) has been found - OK
Security - OK
Print settings are OK with the settings of the router - OK
Unfiltered - NOT OKand then it stops!
Connection - do not run.
Problem was solved by changing the channel 6 to 11 of the channel on the Belkin N1 router.
-
Original title: 2147287035 system error
Hello
Tried to install Kodak all in the printer software, then I got the error database error 2203 2147287035 tracking system - windows/installer\a720de.msi.
Can you please help
Thank you
Hello
If I understand correctly you have a problem with installing the Kodak all in a printer on your Windows Vista computer drivers. I would like to know more information on the issue, so that we can help you better.
1. What is the error message or an exact error code?
2. What is the Kodak printer model number?
Let us try the following methods and check if it works for you.
Method 1:
Try installing the driver in a clean boot state. Place the computer in a clean boot state will help you to install programs without any interference from third-party program/application.
Step 1: How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: once you have completed troubleshooting, try the procedure described in step 3 to reset the computer to start as usual.
Step 2: Find and install printer drivers:
http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
Method 2:
Try to install the printer driver in the Compatibility Center.
Make older programs run in this version of Windows:
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
Please respond with the State of the question, so that we could help you better.
-
I changed a cartridge and try to align the cartridge but keeps paper be ejected with message "paper mismatch" on the front panel of the printer. Same paper and size I always use but I changed out, unplugged and reset the printer and made sure pc the printer settings are compatible with the paper type and size as well. Still no luck. I know that this printer is older but it was gently used
In fact, I had already read the news you mentioned me and it did not apply to my situation of paper. I was using standard letter size paper and had not changed type and size. What I found useful is a blog that mentioned by changing the properties of the printer; printing preferences; type. I got the paper type "automatic" and I changed to "plain paper" as the recommended blog. After that, I was able to align the ink cartridges and print as usual. I still have no idea what caused the problem in the first place since the previous setting was what I always used. Thanks for your interest.
-
Remember - this is a public forum so never post private information such as numbers ofmail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Start, printers, right click on the brother and the selection unit online.
-
Printer all-in-one HP Envy100 will not connect to the network
HP Envy 100 D410a connects to the network even with MAC disabled on Dlink router according to the indications 'wireless network test report? What should I do now?
OK, everything looks good. The firmware is updated on the router? You've restarted the router (pull power plug temporarily)?
-
which way until I put A 4 photo paper in my 7510 HP printer all in one
Hi, what sense until I put A 4 photo paper in my 7510 printer all-in-one with a duplex system?
The paper must be loaded into the tray with the side to be printed facing down. The duplex setting is not compatible with the photo paper, you can select single sided.
-
Y at - it firmware to AirPrint activate my HP Photosmart C7200 series/model CC567A printer all-in-one? My IPAD is not discovering the printer on my wireless system... so I think that the printer is not enabled for AirPrint. ... or would it be a different problem?
I need help.
Unfortunately, there is not a firmware update to enable your printer for AirPrint. You could try the HP ePrint App for the iPad/iPhone.
Let me know if you need help with your question. Thank you
-
Printer all-in-one Photosmart D110: think there paper jams
Printer all-in-one Photosmart D110: think there most of the time paper jams (the computer print or copy). This happened for some time. Sometimes it will print and then at other times, it will produce jam messages when there is not a jam. I tried all the solutions of HP.
There is a document to help walk a (real or fake) paper jam errors troubleshooting in the photosmart D110. This document can be found here.
So I'll send more information via the Inbox of (private) messages.
-
Can I send a fax to a HP Deskjet 2540 printer all-in-one? I have phone line VoIP 'Basic Talk'... are not currently connected to the printer.
Hi @Sunny9,
Thank you for joining the HP Forums!
I understand you're wondering if you can fax with the printer HP Deskjet 2540. I am happy to answer this question!
According to the user's guideof this printer, the printer cannot send fax. It can only print, scan and copy.
If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.
I hope that answers your question!
-
Where to find an IP for hp psc 1410 printer all in one
Hello.
Anyone know where to find an ip address for hp psc 1410, printer all-in-one?
Make sure you have the latest version of Adobe Flash installed.
Download the latest version of the software for your printer on the link below and save it to your desktop
FTP://ftp.HP.com/pub/softlib/software10/COL11786/MP-35363-2/CDB-AmericasEuro1-Express_NB.exe
Then download revo uninstaller on the link below and install it.
http://www.revouninstaller.com/download-freeware-version.php
Unplug the printer from the PC.
Revo and see if he can find any installed printer HP software. If so, right-click the icon of the software and choose uninstall. During the process you may be asked to remove the registry entries. If you are, just select and click on delete. Do the same for any left over files and folders. When finished, restart the PC.
Disable any Antivirus and Antispyware software.
Now, double-click the installer on your desktop to start the installation, the connection of the printer when you are asked.
I hope this helps.
Best wishes
DP - K
-
I have a Photo of C410a HP all-in-one with 8 System (64 bit) I can no longer print to a PDF file, with System 7 worked well. I have up dated to henriq software but still no just pdf. XPS is this normal
Thank you
Keith
Hello
Your Windows 7 machine can have PDF writer on it so you can print to PDF. You need to install PDF writer on your machine Windows 8. There are many of them, including little free such as the following software:
http://en.pdf24.org/pdf-editor.jsp
After installing it, you can see options most notably print to pdf or files. You can also use it to scan to pdf file too.
Kind regards.
Maybe you are looking for
-
iTunes (ver.12.4.1.6) MP3 to AAC files.
I can't find the option to convert MP3 files to AAC files after that I got the new update for iTunes (ver.12.4.1.6). Where at - it go? Now is possible to conversion when I transfer the file to my iPhone/iPod/iPad. This is a great tool and it helped t
-
My wife and I just upgraded to the 6s. His phone will not update the downloaded applications under my apple ID and continues to request the password for my apple ID. We are entering the correct password, but he told us that he failed. I restarted
-
Re: Can I connect two external monitors to my Tecra M7?
I have a Tecra M7, I would put up two external monitors. I install one on the VGA port and one DVI port and I try to extend the monitor overall, but the only option I have is to an external monitor and the screen of the tablet itself. Anyone have any
-
A8 Lenovo support for controller ps3 Bluetooth (a5500-f)
Hi, I got a lenovo a8 and has been trying 2 connect to my ps3 controller using a cable otg, it worked well, but the main reason was if I could use it wirelessly with Bluetooth. But it runs upward on the blue tooth settings to connect he tried various
-
Pavilion 17 TS PC notebook: How can I create another disc of recovery?
My laptop came with Windows 8, but I have recently installed windows 10. I made a disc of recovery originally but now I think I need to make another as operationg system has changed. How can I do that. I get the message that I am only allowed to crea